Sony KV-32CS70K Návod na obsluhu

R

2-055-142-61(2)

KV-28CS70K

KV-32CS70K

Operating Instructions

GB

Before operating the TV, please read the “Safety Information”

section of this manual. Retain this manual for future reference.

Инструкции за използване

BG

Преди да използвате телевизора, прочетете раздела

"Информация за безопасността" на това ръководство.

Запазете това ръководство за бъдещи справки.

Návod k použití

CZ

Před zapnutím televizoru si prosím pozorně přečtěte část

"Bezpečnostní upozornění" v tomto návodu. Návod si uschovejte

i pro budoucí potřebu.

Kezelési utasítás

HU

Mielőtt elkezdené használni a televíziót, kérjük, olvassa el a jelen

kézikönyv Biztonsági tudnivalók c. szakaszát. Őrizze meg a

kézikönyvet későbbi használatra.

Instrukcja obsługi

PL

Przed przystąpieniem do eksploatacji telewizora należy zapoznać się z

rozdziałem "Informacje dotyczące bezpieczeństwa" w niniejszej instrukcji.

Prosimy o zachowanie niniejszej instrukcji do wglądu w przyszłości.

Инструкция по эксплуатации

RU

Перед тем как включить телевизор, просим Вас ознакомиться с

разделом "Общие правила техники безопасности" настоящей

инструкции. Сохраняйте настоящую инструкцию на будущее.

Colour Television

Cover(K).fm Page 1 Wednesday, June 16, 2004 11:58 AM

Cover(K).fm Page 2 Wednesday, April 7, 2004 11:15 AM

Table of Contents 3

Introduction

GB

Thank you for choosing this Sony FD Trinitron Colour Television.

Before operating the TV, please read this manual thoroughly and retain it for future reference.

• Symbols used in the manual:

• Important information.

• Information on a feature.

• 1,2... Sequence of instructions.

• Shaded buttons on the remote control show

you the buttons you have to press to follow

the sequence of the instructions.

• Informs you of the result of instructions.

Table of Contents

Introduction .............................................................................................................................................. 3

Safety Information.................................................................................................................................... 4

Overview

Overview of Remote Control Buttons....................................................................................................... 5

Overview of TV Buttons .......................................................................................................................... 6

Installation

Inserting Batteries into the Remote Control............................................................................................. 6

Connecting the Aerial and VCR .............................................................................................................. 6

First Time Operation

Switching On the TV and Automatically Tuning ...................................................................................... 7

Menu system

Introducing and Using the Menu System................................................................................................. 9

Menu Guide:

Picture Adjustment.......................................................................................................................... 9

Sound Adjustment .......................................................................................................................... 10

Sleep Timer .................................................................................................................................... 11

Language/Country .......................................................................................................................... 11

Auto Tuning .................................................................................................................................... 11

Programme Sorting......................................................................................................................... 12

Programme Labels ......................................................................................................................... 12

AV Preset........................................................................................................................................ 12

Manual Programme Preset............................................................................................................. 13

Auto Format .................................................................................................................................... 15

Noise Reduction ............................................................................................................................. 16

AV3 Output ..................................................................................................................................... 16

TV Speakers................................................................................................................................... 16

RGB Centring ................................................................................................................................. 17

Picture Rotation .............................................................................................................................. 17

Teletext.................................................................................................................................................. 18

Additional Information

Connecting Optional Equipment.............................................................................................................. 19

Using Optional Equipment....................................................................................................................... 20

Specifications........................................................................................................................................... 21

Troubleshooting....................................................................................................................................... 22

GB text.fm Page 3 Wednesday, April 7, 2004 11:39 AM

4 Safety Information

Safety Information

Do not open the cabinet and the rear cover

of the TV. Refer to qualified service

personnel only.

To prevent fire, keep inflammable

objects or naked lights (eg candles)

away from the TV.

Pull out the power lead by the plug.

Do not pull on the power lead itself.

Place the TV on a secure stable stand.

Never attempt to move the TV and stand

together -always move the TV and stand

separately. Do not place the TV on its

side or face up. Do not allow children to

climb on to it.

This set is to operate on a 220-240V AC

supply only. Take care not to connect

too many appliances to the same power

socket as this could result in fire or

electric shock.

To prevent fire or shock hazard, do not

expose the TV to rain or moisture.

For your own safety, do not touch any

part of the TV, power lead or aerial lead

during lightning storms.

Do not cover the ventilation openings of

the TV For ventilation, leave a space of

at least 10cm all around the set.

Do not cover the ventilation

openings of the TV with items such

as curtains or newspapers etc.

Never push objects of any kind into the

set as this could result in a fire or electric

shock. Never spill liquid of any kind on

the set. If any liquid or solid object does

fall into the cabinet, do not operate the

TV. Have it checked immediately by

qualified personnel.

Take care not to place heavy objects

on the power lead as this could result

in damage.

We recommend you wind any excess

lead around the holders provided on

the rear of the TV.

Unplug the power lead before moving

the TV. Avoid uneven surfaces, quick

steps or excessive force. If the set has

been dropped or damaged, have it

checked immediately by qualified

service personnel.

Clean the screen and cabinet with a soft,

lightly dampened cloth. Do not use any type

of abrasive pad, alkaline cleaner, scouring

powder or solvent, such as alcohol or

benzine, or antistatic spray. As a safety

precaution, unplug the TV before cleaning

it.

Never place the TV in hot, humid or

excessively dusty places. Do not

install the TV where it may be

exposed to mechanical vibrations.

For environmental and safety reasons, it

is recommended that the TV set is not

left in standby mode when not in use.

Disconnect from the mains. However,

some TVs may have features which

require they are left in standby. The

instructions in this manual will inform

you if this applies.

GB text.fm Page 4 Wednesday, April 7, 2004 11:39 AM

Overview 5

Overview of Remote Control Buttons

GB

1 To temporarily switch off TV:

Press this button to temporarily switch off TV (the standby indicator

on TV lights up). Press again to switch on TV from standby mode.

To save energy we recommend switching off completely when TV is

not in use.

After 15 minutes without a signal and without any button being

pressed, the TV switches automatically into standby mode.

2 Selecting input source:

Press this button repeatedly until the desired input symbol of the

source appears on the TV screen.

3 Selecting channels:

Press these buttons to select channels.

For double-digit programme numbers, enter the second digit within

2.5 seconds.

4 Previous channel button:

Press this button to watch the last channel selected (provided you

watched it for at least 5 seconds).

5 This button only works in Teletext mode.

6 This button only works in Teletext mode.

7 Selecting Teletext:

Press this button to switch on teletext.

8 Control pad:

• When MENU is switched on, use these buttons to operate the

menu system. For details refer to “Using the Menu System” on

page 9.

• When MENU is switched off, press OK to show a channel

overview. Then press v or V to select the channel and then press

the OK button again to watch the selected channel.

1

2

qj

qh

qg

qf

qd

qs

4

6

7

8

q;

5

9

3

qa

9 Selecting screen format:

Press this button repeatedly to change the screen

format. For more details refer to ‘Auto Format’ on

page 15.

q; Selecting channels:

Press this button to select the next or previous

broadcast channel.

qa Muting the Sound:

Press this button to mute TV sound. Press again

to restore the sound.

qs Adjusting TV volume:

Press this button to adjust the volume of the TV.

qd Displaying the menu system:

Press this button to display the menu on the TV

screen. Press again to remove the menu display

from the TV screen.

qf Selecting TV mode:

Press this button to switch off teletext or video

input.

qg Selecting Sound effect:

Press this button repeatedly to change the sound

effect.

qh Selecting Picture mode:

Press this button repeatedly to change the picture

mode.

qj Displaying on Screen information:

Press this button to display all on-screen

indications. Press again to cancel.

Besides the TV functions, all coloured and green symbol buttons are also used for Teletext operation. For

more details, please refer to “Teletext” section of this instruction manual.

GB text.fm Page 5 Wednesday, April 7, 2004 11:39 AM

6 Overview-Installation

Overview of TV Buttons

4

o4

Audio

Input jacks

Video Input

jack

Selecting

Input source

Headphones

jack

Auto Start Up

Button

S video Input

jack

Volume control

buttons

Programme Up or Down

Buttons (Selects TV

channels)

Pull open the

door on the side of

the TV to reveal

the sockets

Standby

indicator

On/Off

switch

Inserting Batteries into the Remote Control

Make sure you insert the supplied batteries observing the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Connecting the Aerial and VCR

Connecting cables are not supplied.

SONY CORPORA

TION JA

PAN

/4

S

O

N

Y

C

O

R

P

O

R

A

T

I

O

N

J

A

P

A

N

/4

For more details of VCR connection, please refer to the section “Connecting

Optional Equipment” of this instruction manual.

MANUFACTURED UNDER LICENCE

FROM DOLBY LABORATORIES

"DOLBY" AND THE DOUBLE - D

SYMBOL ARE TRADEMARKS OF

DOLBY LABORATORIES

VCR

Scart lead is optional

or

GB text.fm Page 6 Wednesday, April 7, 2004 11:39 AM

First Time Operation 7

Switching on the TV and Automatically Tuning

GB

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to:

1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV,

3) adjust the picture slant 4) search for and store all available channels (TV Broadcasts) and 5) change

the order in which the channels (TV Broadcasts) appear on the screen.

However, if you need to change any of these settings at a later date, you can do that by selecting the

appropriate option in the (Set Up menu) or by pressing the Auto Start Up Button on the TV set.

1

Connect the TV plug to the mains socket (220-240V AC, 50Hz).

The first time that the TV set is connected, it is usually turned on.

If the TV is off, press the on/off button on the TV set to turn on

the TV.

The first time you switch on the TV, a Language menu appears

automatically on the TV screen.

2

Press the v or V button on the remote control to select the

language, then press the OK button to confirm your selection.

From now on all the menus will appear in the selected language.

3

The Country menu appears automatically on the TV screen. Press

the v or V

button to select the country in which you will operate the

TV set, then press the OK button to confirm your selection.

• If the country in which you want to use the TV set does not

appear in the list, select “-” instead of a country.

• In order to avoid wrong teletext characters for Cyrillic

languages we recommend you select Russia as the country

if your own country does not appear in the list.

4

Because of the earth’s magnetism, the picture might slant. The

Picture Rotation menu allows you to correct the picture slant if it

is necessary.

a) If it is not necessary, press the v or V button to select Not

necessary and press OK.

b) If it is necessary, press the v or V button to select Adjust now,

then press OK and correct any slant of the picture between –5

and +5 by pressing the v or V button. Finally press OK to store.

Language

Select Language:

i

v

Svenska

Norsk

English

Nederlands

Français

Italiano

i

V

OK

Country

Select country:

i

v

Sverige

Norge

-

Italia

Deutschland

Österreich

i

V

OK

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

OK

continued...

GB text.fm Page 7 Wednesday, April 7, 2004 11:39 AM

8 First Time Operation

Switching on the TV and Automatically Tuning

5

The Auto Tuning menu appears on the screen. Press the OK

button to select Yes.

6

The TV starts to automatically search and store all available

broadcast channels for you.

This procedure could take some minutes. Please be patient

and do not press any buttons, otherwise the automatic tuning

will not be completed.

If no channels were found during the auto tuning process then

a new menu appears automatically on the screen asking you

to connect the aerial. Please connect the aerial (see page 6)

and press OK. The auto tuning process starts again.

7

After all available channels are captured and stored, the

Programme Sorting menu appears automatically on the

screen enabling you to change the order in which the

channels appear on the screen.

a) If you wish to keep the broadcast channels in their tuned order,

go to step 7.

b) If you wish to store the channels in a different order:

1 Press the v or V button to select the programme number that

has the channel (TV Broadcast) you wish to rearrange, then

press the b

button.

2 Press the v or V button to to select the new programme

number position for your selected channel (TV Broadcast),

then press B.

3 Repeat steps b)1 and b)2 if you wish to change the order of

the other channels.

8

Press the MENU button to remove the menu from the screen.

Your TV is now ready for use.

No channel found

Please connect aerial

Confirm

OK

Programme: 01

System: B/G

Channel: C21

Auto Tuning

Searching...

Programme Sorting

Select channel:

Exit:

MENU

Programme:

01 TVE

02 TVE2

03 TV3

04 C33

05 C27

06 C58

OK

Programme Sorting

Select new position:

Exit:

MENU

Programme:

01 TVE

02 TVE2

03 TV3

04 C33

05 C27

06 C58 05 C27

OK

MENU

Do you want to start

automatic tuning?

Ye s

No

OK

GB text.fm Page 8 Wednesday, April 7, 2004 11:39 AM

Menu System 9

Introducing and Using the Menu System

GB

Your TV uses an on-screen menu system to guide you through the operations. Use the following

buttons on the Remote Control to operate the menu system:

1

Press the MENU button to switch the first level menu on.

2

• To highlight the desired menu or option, press v or V button.

• To enter to the selected menu or option, press b.

• To return to the last menu or option, press B

.

• To alter the settings of your selected option, press v/V/B or b.

• To confirm and store your selection, press the OK button.

3

Press the MENU button to remove the menu from the screen.

Menu Guide

Level 1 Level 2 Level 3 / Function

PICTURE ADJUSTMENT

The “Picture Adjustment” menu allows you to alter

the picture adjustments.

To do this:

After selecting the item you want to alter press the b

button, then repeatedly press the v/V/B or b buttons

to make any adjustments and finally press the OK

button to store.

This menu also allows you to customise the picture

mode based on the programme you are watching:

v Personal (for individual settings).

v Live (for live broadcast programmes, DVD and

Digital Set Top Box receivers).

v Movie (for films).

• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.

• Hue is only available for NTSC colour signal (e.g: USA video tapes).

• Select Reset and press the OK button to return the picture settings to their factory preset levels.

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

continued...

MENU

GB text.fm Page 9 Wednesday, April 7, 2004 11:39 AM

10 Menu System

Introducing and Using the Menu System

Level 1 Level 2 Level 3 / Function

SOUND ADJUSTMENT

The “Sound Adjustment” menu allows you to alter the

sound settings.

To do this:

After selecting the item you want to alter press the b

button, then repeatedly press the v/V/B or b buttons

to make any adjustments and finally press the OK

button to store.

Effect bvNatural: Enhances clarity, detail and presence of sound by using the “BBE

High Definition Sound system”*.

v Dynamic: “BBE High Definition Sound system”* intensifies clarity and presence

of sound for better intelligibility and musical realism.

v Dolby**Virtual: Simulates the sound effect of “Dolby Surround Pro Logic”.

v Off: Flat response.

Treble bBLess b More

Bass bBLess b More

Balance bBLeft b Right

Reset Resets the sound to the factory preset levels.

Dual Sound b • For a stereo broadcast:

v Mono.

v Stereo.

• For a bilingual broadcast:

v Mono (for mono channel if available).

v A (for channel 1).

v B (for channel 2).

Auto VolumebvOff: volume level changes according to the broadcast signal.

v On: volume level of the channels will stay the same, independent of the broadcast

signal (e.g. in the case of advertisements).

• If you are listening to the TV through headphones, the “Effect” option is automatically switched to “Off”.

• If you select “Dolby Virtual” in the “Effect” option, the “Auto Volume” option is automatically switched to

“Off” and vice versa.

*The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from

BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and

BBE Symbol are trademarks of BBE Sound, Inc.

**This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound of

four speakers with only two speakers, when the broadcast audio signal is Dolby Surround encoded.

The sound effect can also be improved by connecting a suitable external amplifier (for details refer

to “Connecting to external audio Equipment” on page 20).

**Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol

are trademarks of Dolby Laboratories.

K

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Sound Adjustment

Effect: Natural

Treble

Bass

Balance

Reset

Dual Sound: Mono

Auto volume: On

OK

Sound Adjustment

Effect: Natural

Treble

Bass

Balance

Reset

Dual Sound: Mono

Auto volume: On

OK

continued...

GB text.fm Page 10 Wednesday, April 7, 2004 11:39 AM

Menu System 11

Introducing and Using the Menu System

GB

Level 1 Level 2 Level 3 / Function

SLEEP TIMER

The “Sleep Timer” option in the “Timer” menu allows

you to select a time period for the TV to automatically

switch itself into the standby mode.

To do this:

After selecting the option, press the

b button then

press the v or V button to set the time period delay

(max. of 4 hours) and finally press the OK button to

store.

• While watching the TV, you can press the

button on the remote control to display the time

remaining.

• One minute before the TV switches itself into

standby mode, the time remaining is displayed on

the TV screen automatically.

LANGUAGE / COUNTRY

The “Language/Country” option in the “Set Up” menu

allows you to select the language in which the menus

are displayed. It also allows you to select the country

in which you wish to operate the TV set.

To do this:

After selecting the option, press the

b button then

proceed in the same way as in the steps 2 and 3 of

the section “Switching On the TV and Automatically

Tuning” on page 7.

AUTO TUNING

The “Auto Tuning” option in the “Set Up” menu allows

you to automatically search for and store all available

TV channels.

To do this:

After selecting the option, press the

b button then

proceed in the same way as in TV steps 5 and 6 of

the section “Switching On the TV and Automatically

Tuning” on page 8.

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Timer

Sleep Timer: Off

OK

Timer

Sleep Timer: Off

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

continued...

GB text.fm Page 11 Wednesday, April 7, 2004 11:39 AM

12 Menu System

Introducing and Using the Menu System

Level 1 Level 2 Level 3 / Function

PROGRAMME SORTING

The “Programme Sorting” option in the “Set Up”

menu allows you to change the order in which the

channels (TV Broadcasts) appear on the screen.

To do this:

After selecting the option, press the

b button then

proceed in the same way as in step 7 b) of the section

“Switching On the TV and Automatically Tuning” on

page 8.

PROGRAMME LABELS

The “Programme Labels” option in the “Set Up” menu

allows you to name a channel using up to five

characters (letters or numbers).

To do this:

1 After selecting the option, press the b button, then

press the

v or V buttons to select the programme

number of the channel you wish to name.

2 Press b button. With the first element of the Label

column highlighted, press v or

V buttons to select

a letter or number (select “-“ for a blank), then

press the

b button to confirm the character. Select

the other four characters in the same way. Finally

press the OK to store.

AV PRESET

The “AV Preset” option in the “Set Up” menu allows

you to designate a name to the external equipment

you have connected to the sockets of this TV.

To do this:

1 After selecting the option, press the

b button, then

press the v or

V buttons to select the input source

you wish to name (AV1, AV2 and AV3 represent

the rear Scart sockets and AV4 is for the side

connectors). Then press the b button to confirm.

2 A predefined label automatically appears in the

label column:

a) If you want to use one of the 6 predefined

labels (CABLE, GAME, CAM, DVD, VIDEO or

SAT), press the v or

V buttons to select the

desired label, then press OK button to store.

b) If you want to set a different label, select Edit

and press b button. Then with the first element

highlighted, press the v or

V buttons to select

a letter, number or “-“ for a blank, then press b

button to confirm the character. Select the

other four characters in the same way. Finally

press the OK button to store.

continued...

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

GB text.fm Page 12 Wednesday, April 7, 2004 11:39 AM

Menu System 13

Introducing and Using the Menu System

GB

Level 1 Level 2 Level 3 / Function

MANUAL PROGRAMME PRESET

The “Manual Programme Preset” option in the “Set

Up” menu allows you to:

a) Preset channels or the VCR channel one by one

to the programme order of your choice.

To do this:

1 After selecting the ”Manual Programme Preset”

option, press the

b button then with Programme

option highlighted press the

b button.

Press the v or

V buttons to select which

programme number you want to preset the

channel to (for VCR, select programme number

“0”). Then press the B button.

2 The availability of this option depends on

the country you have selected in the

“Language/Country” menu.

After selecting the System option, press the

b

button. Then press the v or

V buttons to select the

TV Broadcast system (B/G for western European

countries or D/K for eastern European countries).

Press the B button.

3 After selecting the Channel option, press the b

button. Then press the v or

V buttons to select the

channel tuning (“C” for terrestrial channels or “S”

for cable channels). Next press b button. After

that, press the numbered buttons to directly enter

the channel number of the TV Broadcast or the

VCR channel. If you do not know the channel

number, press the v or

V buttons to search for it.

When you have tuned to the desired channel,

press the OK button twice to store.

Repeat all the above steps to tune and store more

channels.

b) Label a channel using up to five characters.

To do this:

After highlighting the Programme option, press

the PROG +/- button to select the programme

number of the channel you wish to name. When

the programme you want to name appears on the

screen, select the Label option and press

b

button. Next press the v or

V buttons to select a

letter, number or “-“ for a blank. Press the

b button

to confirm thecharacter. Select the other four

characters in the same way. After selecting all the

characters, press the OK button twice to store.

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

continued...

GB text.fm Page 13 Wednesday, April 7, 2004 11:39 AM

14 Menu System

Introducing and Using the Menu System

Level 1 Level 2 Level 3 / Function

c) Manually fine tune the TV to obtain a better

picture reception if the picture is distorted.

Normally the automatic fine tuning (AFT) is in

operation, but you can alter it manually.

To do this:

Whilst watching the channel (TV Broadcast) you

wish to fine tune, select the AFT option and press

b button. Next press the v or

V buttons to adjust

the fine tuning between -15 and +15. Finally

press the OK button twice to store.

d) Skip any unwanted programme numbers when

they are selected with the PROG +/- buttons.

To do this:

After highlighting the Programme option, press

the PROG +/- button to select the programme

number you want to skip. When the programme

you want to skip appears on the screen, select

the Skip option and press the b button. Next

press the v or

V buttons to select Yes. Finally

press the OK button twice to confirm and store.

To cancel this function later on select “No”

instead of “Yes” in the step above.

e) View and record scrambled channels when using

a decoder connected directly to the Scart socket

3/ 3 or through a VCR.

The availability of this option depends on

the country you have selected in the

“Language/Country” menu.

To do this:

Select the Decoder option and press the b

button. Next press the v or

V buttons to select

On. Finally press the OK button twice to confirm

and store.

To cancel this function later on, select “Off”

instead of “On” in the step above.

S

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

continued...

GB text.fm Page 14 Wednesday, April 7, 2004 11:39 AM

Menu System 15

Introducing and Using the Menu System

GB

Level 1 Level 2 Level 3 / Function

AUTO FORMAT

The “Auto Format” option in the “Detail Set Up” menu

allows you to automatically change the aspect ratio

of the screen.

To do this:

After selecting the option, press the b button. Then

press the v or

V buttons to select On (if you wish the

TV set to automatically switch to the screen format

used on the broadcast signal) or Off (if you wish to

keep your preference). Finally press the OK button to

store.

Even if you have selected “On” or “Off” in the

“Auto Format” option, you can always modify

the format of the screen by pressing

repeatedly on the remote control to select one

of the following formats.

Smart: Imitation of wide screen effect for 4:3

broadcasts.

4:3: Conventional 4:3 picture size, full picture

information.

14:9: Compromise between 4:3 and 16:9 picture

size

Zoom: Widescreen format for letterbox movies

Wide: For 16:9 broadcast. Full picture information

In “Smart”, “Zoom” and “14:9” modes, a part

of of the top and bottom of the screen are cut

off. Press the v or

V buttons to adjust the

position of the image on the screen (to read

subtitles for example).

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Detail Set Up

Auto format:

Noise Reduction:

AV3 output:

TV speakers:

RGB Centring:

Picture Rotation

On

Auto

TV

On

0

OK

4 : 3

Zoom

14 : 9

Wide

Smart

continued...

GB text.fm Page 15 Wednesday, April 7, 2004 11:39 AM

16 Menu System

Introducing and Using the Menu System

Level 1 Level 2 Level 3 / Function

NOISE REDUCTION

The “Noise Reduction” option in the “Detail Set Up”

menu allows you to automatically reduce any picture

noise visible in the broadcast signal.

To do this:

After selecting the option, press the b button. Then

press the v or

V buttons to select Auto. Finally press

the OK button to confirm and store.

To cancel this function later on, select “Off” instead of

“Auto” in the step above.

AV3 OUTPUT

The “AV3 Output” option in the “Detail Set Up” menu

allows you to select the source to be output from the

Scart connector 3/ 3 so you can record from

this Scart any signal coming from the TV or from

external equipment connected to Scart connectors

1/ 1 or 2/ 2 or the side connectors

4 or 4 and 4.

If your VCR supports Smartlink, this procedure

is not necessary.

To do this:

After selecting the option, press the b button. Then

press the v or

V buttons to select the desired output

signal: TV, AV1, AV2, AV4, YC4 or AUTO.

If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.

If you have connected a decoder to the Scart socket 3/ 3 or to a VCR connected to that Scart

socket, please remember to set the “AV3 Output” to “AUTO” or “TV” for correct unscrambling.

TV SPEAKERS

The “TV Speakers” option in the “Detail Set Up”

menu allows you to mute the TV speakers in order to

listen to the TV from an external amplifier connected

to the audio outputs on the rear of the TV set.

To do this:

After selecting the option, press the b button. Then

press the v or

V buttons to select Off. Finally press

the OK button to confirm and store.

To cancel this function later on, select “On” instead of

“Off” in the step above.

S

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Detail Set Up

Auto format:

Noise Reduction:

AV3 output:

TV speakers:

RGB Centring:

Picture Rotation

On

Auto

TV

On

0

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Detail Set Up

Auto format:

Noise Reduction:

AV3 output:

TV speakers:

RGB Centring:

Picture Rotation

On

Auto

TV

On

0

OK

continued...

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Detail Set Up

Auto format:

Noise Reduction:

AV3 output:

TV speakers:

RGB Centring:

Picture Rotation

On

Auto

TV

On

0

OK

GB text.fm Page 16 Wednesday, April 7, 2004 11:39 AM

Menu System 17

Introducing and Using the Menu System

GB

Level 1 Level 2 Level 3 / Function

RGB CENTRING

When connecting an RGB source, such as a

“PlayStation”, you may need to readjust the

horizontal position of the picture. In that case, you

can readjust it using the “RGB Centring” option in the

“Detail Set Up”.

To do this:

While watching an RGB source select the “RGB

Centring” option and press the b button. Then press

the v or

V buttons to adjust the centre of the picture

between –10 and +10. Finally press the OK button to

confirm and store.

PICTURE ROTATION

Because of the earth’s magnetism, the picture might

slant. If this is the case, you can correct the pictures

slant by using the option “Picture Rotation” in the

“Detail Set Up” menu.

To do this:

After selecting the option, press the b button. Then

press the v or V buttons to correct any slant of the

picture between -5 and +5 and finally press the OK

button to store.

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Detail Set Up

Auto format:

Noise Reduction:

AV3 output:

TV speakers:

RGB Centring:

Picture Rotation

On

Auto

TV

On

0

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Detail Set Up

Auto format:

Noise Reduction:

AV3 output:

TV speakers:

RGB Centring:

Picture Rotation

On

Auto

TV

On

0

OK

GB text.fm Page 17 Wednesday, April 7, 2004 11:39 AM

18 Teletext

Teletext

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

Teletext is an information service transmitted by most TV stations. The index page of the teletext service

(usually page 100) gives you information on how to use the service. To operate teletext, use the remote

control buttons as indicated below.

Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.

To Switch on Teletext:

After selecting the TV channel which carries the teletext service you wish

to view, press the button.

To Select a Teletext page:

Input the 3 digits of the page number, using the numbered buttons.

• If you have made a mistake, retype the correct page number.

• If the counter on the screen continues searching, it is because the page is not

available.

In that case, input another page number.

To access the next or preceding page:

Press PROG + () or PROG - ( ) buttons.

To superimpose teletext onto the TV:

Whilst you are viewing teletext, press the button. Press again to cancel teletext mode.

To freeze a teletext page:

Press the / button. Press again to cancel freeze.

To reveal concealed information (e.g: answer to a quiz):

Press the / button. Press again to conceal the information.

To select a sub page:

A teletext page may consist of several sub pages. In this case the page number that appears on the upper left

corner changes colour from yellow to green, and one or more arrows will appear next to the page number.

Repeatedly press the B or b buttons on the remote control to watch the desired sub page.

To Switch Off Teletext:

Press button.

Fastext

The Fastext service lets you access pages with one button push.

While you are in Teletext mode and providing Fastext is broadcast, a colour coded menu appears at the

bottom of the teletext page. Press one of the coloured buttons (red, green, yellow or blue) to access the

corresponding page.

GB text.fm Page 18 Wednesday, April 7, 2004 11:39 AM

Additional Information 19

Connecting Additional Equipment

GB

Using the following instructions you can connect a wide range of optional equipment to your TV set.

(Connecting cables are not supplied).

S

O

N

Y

4

o4

continued...

MANUFACTURED UNDER LICENCE

FROM DOLBY LABORATORIES

"DOLBY" AND THE DOUBLE - D

SYMBOL ARE TRADEMARKS OF

DOLBY LABORATORIES

G

Decoder

DF

DVD

Decoder

VCR

E

“PlayStation”*

Hi-Fi

• To avoid picture distortion, do not connect external equipment to connectors A and B at the same

time.

• Do not connect a Decoder to the Scart connector F.

• Games that use a “gun” attachment to point at the screen do not work correctly due to the 100Hz

technology used in this television

Connecting a VCR:

To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual. We

recommend you connect your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test

signal to the TV programme number “0” by using the “Manual Programme Preset” option. (for details of how

to manually programme these presets, see page 13, step a).

Refer to your VCR instruction manual to find out the output channel of your VCR.

Connecting a VCR that supports Smartlink:

Smartlink is a direct link between the TV set and the VCR. For more information on Smartlink, please

refer to the instruction manual of your VCR.

If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to the Scart

socket 3/ 3 G.

If you have connected a decoder to the Scart 3/ 3 G or through a VCR connected to

this Scart:

Select the “Manual Programme Preset” option in the “Set Up” menu and after selecting the “Decoder**” option,

select “On” (by using

the v or V button). Repeat this procedure for each scrambled signal.

** The availability of this option depends on the country you have selected in the “Language/Country” menu.

S

* “PlayStation” is a product of Sony

Computer Entertainment, Inc.

* “PlayStation” is a trademark of Sony

Computer Entertainment, Inc.

When you connect the headphones,

the TV speakers will automatically be

muted.

B

C

A

S VHS/Hi8/

DVC

camcorder

8mm/Hi8/

DVC

camcorder

GB text.fm Page 19 Wednesday, April 7, 2004 11:39 AM

20 Additional Information

Connecting Additional Equipment

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio output from your

TV. Next, using the menu system, select the “Set Up” menu. Enter the “Detail Set Up” menu and set “TV

Speakers” to “Off”.

The audio level of the external speakers can be modified by pressing the volume buttons on the remote

control. Also, treble and bass settings can be modified through the “Sound Adjustment” menu.

To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:

Place the speakers of your equipment in front of your sitting position

and besides the TV set, but keeping a distance of 50 cm from each

speaker to the TV set.

Then, using the menu system, select the menu “Sound Adjustment”,

and select “Dolby Virtual” on the “Effect” option.

Using optional Equipment

1

Connect your equipment to the designated TV socket, as indicated in the previous page.

2

Switch on the connected equipment.

3

To watch the picture from the connected equipment, press the button repeatedly until the correct

input symbol appears on the screen.

Symbol

1

2

3

4

Input Signals

• Audio / video input signal through the Scart connector E.

• RGB input signal through the Scart connector E. This symbol appears only if a RGB

source has been connected.

• Audio / video input signal through the Scart connector F.

• RGB input signal through the Scart connector F. This symbol appears only if a RGB

source has been connected.

• Audio/video input signal through the Scart connector G.

• S Video Input signal through the Scart connector G. This symbol appears only if a S

Video source has been connected.

• Video input signal through the phono socket B and Audio input signal through phono

socket C.

• S Video Input signal through the front S Video input jack A and Audio signal through

phono socket C. This symbol appears only if a S Video source has been connected.

4

Press button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the side of the TV and select 4 or 4 input signal using

the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual

Sound” “A” on the sound menu screen.

S

Left Hi-Fi

speaker

Right Hi-Fi

speaker

Your sitting position

50cm 50cm

GB text.fm Page 20 Wednesday, April 7, 2004 11:39 AM

Stránka sa načítava...

Sony KV-32CS70K Návod na obsluhu

Sony KV-32CS70K Návod na obsluhu

v iných jazykoch

Súvisiace články