AEG DBB 5660 HM Používateľská príručka

Kategória
Odsávače pár
Typ
Používateľská príručka
USER
MANUAL
DIE5960HG, DBB5660HM
DBB5960HM , DBK5960DHM
DIB5160HM , DKB5660HM
DKB5960HM , DBB6960HM
DTB5660HM , DTB5960HM
DBE5960HG , DBE5960HM
DBB5760HM, GD5160I
GD5960B , GD5660B
EN USER MANUAL 2
DE GEBRAUCHSANLEITUNG 8
FR MANUEL D’UTILISATION 14
NL GEBRUIKSAANWIJZING 20
ES MANUAL DE USO 26
PT LIVRO DE INSTRUÇÕES PARA
UTILIZAÇÃO. 32
IT LIBRETTO DI USO 39
SV ANVÄNDNINGSHANDBOK 45
NO BRUKSVEILEDNING 51
FI KÄYTTÖOHJEET 57
DA BRUGSVEJLEDNING 63
RU
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
69
ET KASUTUSJUHEND 75
LV LIETOŠANAS PAMĀCĪBA 81
LT NAUDOTOJO VADOVAS 87
UK ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ 93
HU HASZNÁLATI ÚTMUTATÓ 99
CS NÁVOD K POUŽITÍ 105
SK NÁVOD NA POUŽÍVANIE 111
RO MANUAL DE FOLOSIRE 117
PL INSTRUKCJA UŻYTKOWANIA 123
HR KNJIŽICA S UPUTAMA 129
SL NAVODILO ZA UPORABO 135
EL ΟΔΗΓΊΕΣ ΧΡΉΣΗΣ 141
TR KULLANIM KITAPÇIĞI 147
BG
РЪКОВОДСТВО НА ПОТРЕБИТЕЛЯ
153
KK ПАЙДАЛАНУШЫ НҰСҚАУЛЫҒЫ 160
MK УПАТСТВО ЗА КОРИСНИК 167
SQ UDHËZUES PËR PËRDORIMIN 173
SR КОРИСНИЧКО УПУТСТВО 179
191 AR
www.aeg.com
2
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler
– features you might not nd on ordinary appliances. Please spend a few minutes reading to
get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
ENVIRONMENT CONCERNS
Recycle the materials with the symbol . Put the packaging in applicable containers to
recycle it. Help protect the environment and human health and to recycle waste of electrical
and electronic appliances. Do not dispose appliances marked with the symbol with the
household waste. Return the product to your local recycling facility or contact your municipal
of ce department for household waste or the shop where you purchased this product.
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information.
Subject to change without notice.
SAFETY INFORMATION
Before any cleaning or maintenance operation, disconnect
hood from the mains by removing the plug or disconnecting
the mains electrical supply. Always wear work gloves for all
installation and maintenance operations. This appliance can
be used by children aged from 8 years and above and per-
sons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children
shall not be allowed to tamper with the controls or play with
the appliance. Cleaning and user main te nance shall not be
made by children without supervision. The premises where
the appliance is installed must be suf ciently ventilated,
when the kitchen hood is used together with other gas
EN USER MANUAL
3
ENGLISH
combustion devices or other fuels. The hood must be
regularly cleaned on both the inside and outside (AT LEAST
ONCE A MONTH). This must be completed in accor dance
with the maintenance instructions provided in this manual.
Failure to follow the instruc tions provided in this user guide
regarding the cleaning of the hood and lters will lead to the
risk of res. The aming of foods beneath the hood itself is
severely prohibited.
1.SAFETY INSTRUCTIONS
The use of exposed ames is detrimental
to the lters and may cause a re risk,
and must therefore be avoided in all
circumstances.
Any frying must be done with care in order
to make sure that the oil does not overheat
and ignite.
CAUTION: Accessible parts of the
hood may become hot when used with
cooking appliances.
For lamp replacement use only lamp type
indicated in the Maintenance/Replacing
lamps section of this manual.
WARNING! Do not connect the
appliance to the mains until the
installation is fully complete.
With regards to the technical and safety
measures to be adopted for fume
discharging it is important to closely follow
the regulations provided by the local
authorities.
The ducting system for this appliance must
not be connected to any existing ventilation
system which is being used for any other
purpose such as discharging exhaust fumes
from appliances burning gas or other fuels.
Do not use or leave the hood without the
lamp correctly mounted due to the possible
risk of electric shocks.
Never use the hood without effectively
mounted grids.
The hood must NEVER be used as
a support surface unless speci cally
indicated.
Use only the xing screws supplied with the
product for installation or, if not supplied,
purchase the correct screws type.
Use the correct length for the screws which
are identi ed in the Installation Guide.
In case of doubt, consult an authorised
service assistance centre or similar
quali ed person.
WARNING! Failure to install the
screws or fixing device in accordance
with these instructions may result in
electrical hazards.
2.USE
The hood serves to aspirate the fumes and
vapors resulting from cooking.
The attached installation manual indicates
the version to be used depending on the
model you have, the suction version with
external evacuation or ltering with
internal recirculation .
3.INSTALLATION
The mains power supply must correspond
to the rating indicated on the plate situated
inside the hood. If provided with a plug
connect the hood to a socket in compliance
with current regulations and positioned in
an accessible area, after installation. If it not
tted with a plug (direct mains connection)
or if the plug is not located in an accessible
area, after installation, apply a double
pole switch in accordance with standards
which assures the complete disconnection
of the mains under conditions relating to
over-current category III in accordance with
installation instructions.
Warning!Before re-connecting the hood
circuit to the mains supply and checking
the efficient function, always check that
the mains cable is correctly assembled.
www.aeg.com
4
4.1 Grease lter - The grease lter must
be cleaned once a month using non
aggressive detergents, either by hand or
in the dishwasher, which must be set to a
low temperature and a short cycle. When
washed in a dishwasher, the grease lter
may discolour slightly, but this does not
affect its ltering capacity.
The minimum distance between the
supporting surface for the cooking
equipment on the hob and the lowest part
of the range hood must be not less than
50cm from electric cookers and 65cm from
gas or mixed cookers. If the instructions for
installation for the gas hob specify a greater
distance, this must be adhered to.
4. MAINTENANCE
ATTENTION! Before performing any
maintenance operation, isolate the
hood from the electrical supply by
switching off at the connector and
removing the connector fuse.
Or if the appliance has been connected
through a plug and socket, then the plug
must be removed from the socket.
The cooker hood should be cleaned
regularly (at least with the same frequency
with which you carry out maintenance of the
fat lters) internally and externally. Clean
using the cloth dampened with neutral liquid
detergent. Do not use abrasive products.
DO NOT USE ALCOHOL!
Warning! Failure to carry out the basic
cleaning recommendations of the
cooker hood and replacement of the
lters may cause re risks. Therefore,
we recommend observing these
instructions.
The manufacturer declines all responsibility
for any damage to the motor or any
re damage linked to inappropriate
maintenance or failure to observe the above
safety recommendations.
5
ENGLISH
4.2 Charcoal filter
Type 20 LONG LIFE - Washable activat-
ed charcoal fi lter
The charcoal fi lter can be washed once every
two months using hot water and a suitable
detergent, or in a dishwasher at 65°C (if
the dishwasher is used, select the full cycle
function and leave dishes out).
Eliminate excess water without damaging the
lter, then remove the mattress located inside
the plastic frame and put it in the oven for 10
minutes at 100° C to dry completely. Replace
the mattress every 3 years and when the cloth
is damaged.
4.3 Type 15 - NON-washable activated
charcoal fi lter
The saturation of the charcoal fi lter occurs
after more or less prolonged use, depending
on the type of cooking and the regularity of
cleaning of the grease fi lter. In any case it is
necessary to replace the cartridge at least
every four mounths.
The charcoal fi lter may NOT be washed or
regenerated.
(1*)
(2*)
(3**)
(4**)
(*) Type 20
(**) Type 15 - Type 20
4.4 Regenerable carbon lter
The carbon lter must be regenerated every
two months (or when the lter saturation indica-
tor - if present - indicates the need for it) and in
accordance with the procedure as shown here
below:
1. Disconnect the electrical appliance from the
mains.
2. Clean the lter’s surface with a damp cloth
to remove grease deposits.
3. Put the lter in an oven at 200 degrees for
45 minutes.
4. Turn off the oven and wait for an hour
before taking out the lter.
Attention! Make sure the lter has cooled
down before touching it.
Type SUPCHARC-E
www.aeg.com
6
5. CONTROLS
The hood is tted with a control panel with
aspiration speed selection control and a
light switch to control cooking area lights.
Use the high suction speed in cases
of concentrated kitchen vapours. It is
recommended that the cooker hood suction
is switched on for 5 minutes prior to cooking
and to leave in operation during cooking
and for another 15 minutes approximately
after terminating cooking.
The control switches are located on the
unit’s front panel:
T6
1 T2 T3 T4 T5 T6 T7 T8 T9
2 3 4 5 6 7 8 9
1 Speed ON/OFF button
Control panel on/off key
2 Suction speed (power) key 1:
3 Suction speed (power) key 2:
4 Suction speed (power) key 3:
5 Suction speed (power) key 4:
Note: suction speed (power) key 4 has
a limited duration of 5 minutes, after
which the previous suction speed is
reactivated.
6 "Breeze" function key
(Room ventilation)
The hood switches on at low suction
speed (power) for 60 minutes, after
which it switches off.
7 Filter saturation control and
activation/deactivation key
8 Hob2
H
ood function indicator
9 Lights ON/OFF key
Control panel on/off function
With the hood in standby, press key 1 , all
led lights will switch off: the control panel
is off.
Press key 1 again, all led lights will turn
on: the control panel is active.
Carbon lter saturation control activation/
deactivation function
With the hood in standby, press key 5 for
longer than 3 seconds
Key 7 will ash to indicate that the carbon
saturation lter has been activated.
Key 7 will remain lit to indicate that
the carbon saturation lter has been
deactivated.
Filter saturation control and reset
function
At regular intervals and depending on
the hood temperature, key 7 lights
up to indicate that the lters need to
be maintained in accordance with the
instructions in the relative paragraphs.
Key 7 on with a xed light: maintenance is
required on the grease lters
Key 7 on and ashing: maintenance is
required on the carbon lter.
Filter saturation indicator reset
With the hood in standby, press key 7 for
longer than 3 seconds.
Repeat the operation if necessary.
7
ENGLISH
5.1 Hob
2
Hood
The hood is equipped with a function for
wireless connection with the cooktop for
automatic adjustment of the most suitable
speed. Refer to the instruction manual of
the cooktop to verify the presence and
compatibility of this function.
In the case of rst connection to the mains
or abrupt disconnection from power supply
(blackout), wait 1 minute to allow the hood
to restore the connection with the cooktop.
When the hood is working in Hob
2
Hood
mode, key 8 is lit.
6. LIGHTING
The hood is equipped with a lighting system
based on LED technology.
The LEDs guarantee an optimum lighting,
a duration up to 10 times as long as the
traditional lamps and allow to save 90%
electrical energy.
Caution! Do not look directly into the
LED light.
To replace lights, contact authorised spare
part center.
www.aeg.com
8
FÜR PERFEKTE ERGEBNISSE
Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen,
damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen
Technologien, die Ihnen das Leben erleichtern, pro tieren können. Es ist mit Funktionen
ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar
Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
Besuchen Sie uns auf unserer Website, um:
Anwendungshinweise, Prospekte, Fehlerbehebungs- und Service-Informationen zu
erhalten:
www.aeg.com
Ihr erworbenes Produkt zu registrieren, um den besten Service dafür zu
gewährleisten:
www.aeg.com/productregistration
Zubehör, Verbrauchsmaterial und Original-Ersatzteile für Ihr Gerät zu erwerben:
www.aeg.com/shop
UMWELTTIPPS
Recyclen Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den
entsprechenden Recyclingbehältern.
Recyclen Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte.
Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das
Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
REPARATUR- UND KUNDENDIENST
Bitte verwenden Sie ausschließlich Original-Ersatzteile für Ihre Produkte.
Halten Sie folgende Angaben bereit, wenn Sie sich an den Kundendienst wenden
(diese Informationen nden Sie auf dem Typenschild): Modell, Produktnummer (PNC),
Seriennummer.
Warnungs-/ Sicherheitshinweise.
Änderungen vorbehalten.
SICHERHEITSHINWEISE
Vor jeglicher Reinigung bzw. Wartung, muss das Gerät vom Stromnetz
getrennt werden, indem man den Stecker auszieht bzw. den Hauptschalter
ausschaltet.
Alle Installations-und Wartungarbeiten sind mit Arbeitshandschuhen
durchzuführen.
Das Gerät kann von Kindern ab 8 Jahren, sowie von Menschen mit
verringerten physischen, sinnlichen oder psychischen Fähigkeiten (oder
ohne Erfahrung und Kenntnisse) benutzt werden, sofern sie entsprechend
überwacht werden bzw. in die Benutzung des Geräts sicher eingewiesen
worden und sich den damit verbundenen Gefahren bewusst sind.
Darauf achten, dass Kinder mit dem Gerät nicht spielen. Die Reinigungs-
und -Wartungsarbeiten müssen von unüberwachten Kindern nicht
durchgeführt werden.
DE GEBRAUCHSANLEITUNG
9
DEUTSCH
Der Raum muss ausreichend belüftet sein, wenn die Dunstabzugshaube
zusammen mit anderen Gas-bzw. Brennstoffgeräten verwendet wird.
Die Dunstabzugshaube ist regelmäßig innen und außen zu reinigen: bei
der Reinigung ist auf die Wartungshinweise des vorliegenden Handbuchs
zu achten.
Das Nichtbeachten der Reiningungshinweise und des Ersatzes bzw.
Reinigung der Filter kann zur Brandgefahr führen.
Es ist streng verboten, Speisen auf der Flamme unter der
Dunstabzugshaube zu kochen.
1.
SICHERHEITSHINWEISE
Die Verwendung von offener Flamme
schadet den Filtern und kann zu
Brandgefahr führen, daher ist die in jedem
Fall zu vermeiden.
Das Frittieren muss mit Vorsicht
durchgeführt werden, um zu vermeiden,
dass das überhitzte Öl Feuer fängt.
ACHTUNG: Ist das Kochfeld in
Betrieb, können zugängliche Teile der
Dunstabzugshaube heiß werden.
Für den Lampenersatz verwenden Sie
nur den Lampentyp, der in dem Absatz
Lampenwartung / Ersatz des vorliegenden
Handbuchs angegeben wird.
Achtung! Das Gerät nicht an das
Stromnetz anschließen, bis die
Installation vollständig abgeschlossen
ist.
Für das Ableiten der Küchengerüche, sich
streng an die Voschriften der örtlichen
Behörde halten.
Bei gleichzeitigem Betrieb der
Dunstabzugshaube im Abluftbetrieb
und gas- oder brennstoffbetriebenen
Geräten darf im Aufstellraum gas- oder
brennstoffbetriebenen Geräten der
Unterdruck nicht größer als 4 Pa (4 x 10-5
bar) sein.
Die Abzugsluft darf nicht in eine Ableitung
der Rauch-bzw.Brennstoffgase geleitet
werden.
Die Dunstabzugshaube ohne richtig
installierte Lampen nicht verwenden
bzw. lassen, um Stromschlaggefahr zu
vermeiden.
Die Dunstabzugshaube niemals ohne
richtig installiertes Gitter verwenden!
Die Dunstabzugshaube darf NIEMALS als
Au age äche verwendet werden, sofern es
nicht ausdrücklich angegeben ist.
Verwenden Sie nur die mit dem Produkt für
die Installation mitgelieferten Schrauben,
oder, falls nicht im Lieferumfang enthalten,
kaufen Sie den richtigen Schraubentyp. Die
Länge für die Schrauben verwenden, die im
Installationshandbuch angegeben wird. Im
Zweifelsfall, fragen Sie Ihren autorisierten
Kundendienst oder ein ähnliches
Fachpersonal.
ACHTUNG! Schrauben und
Befestigungselemente, die nicht in
Übereinstimmung mit diesen Hinweisen
sind, können zur elektrischen
Gefährdung führen.
2.BEDIENUNG
Der Dunstabzug dient zum Absaugen der
beim Kochen entstehenden Dämpfe.
In dem mitgelieferten Montagehandbuch ist
angegeben, ob Sie Ihre Haube als Abluft-
oder Umluftversion betreiben.
3.BEFESTIGUNG
Die Netzspannung muss der
Spannung entsprechen, die auf dem
Betriebsdatenschild im Innern der Haube
angegeben ist. Sofern die Haube einen
Netzstecker hat, ist dieser an zugänglicher
Stelle an eine den geltenden Vorschriften
entsprechende Steckdose auch nach der
Montage anzuschließen. Bei einer Haube
ohne Stecker (direkter Netzanschluss) oder
falls der Stecker nicht zugänglich ist, ist ein
normgerechter zweipoliger Schalter auch
nach der Montage anzubringen, der unter
Umständen der Überspannung Kategorie
III entsprechend den Installationsregeln ein
vollständiges Trennen vom Netz garantiert.
Hinweis!Vor der Inbetriebnahme
muss sichergestellt sein, dass
die Netzversorgung (Steckdose)
ordnungsgemäß montiert wurde.
www.aeg.com
10
4.1 Fett lter
Der Metallfett lter muss einmal monatlich
gewaschen werden. Das kann mit
einem milden Waschmittel von Hand,
oder in der Spülmaschine bei niedriger
Temperatur und Kurzspülgang erfolgen.
Der Metallfett lter kann bei der Reinigung
in der Spülmaschine abfärben, was seine
Filtermerkmale jedoch in keiner Weise
beeinträchtigt.
Der Abstand zwischen der Abstell äche
auf dem Kochfeld und der Unterseite
der Dunstabzugshaube darf 50cm im
Fall von elektrischen Kochfeldern und
65cm im Fall von Gas- oder kombinierten
Herden nicht unterschreiten.Wenn
die Installationsanweisungen des
Gaskochgeräts einen größeren Abstand
vorgeben, ist dieser zu berücksichtigen.
4. WARTUNG
Hinweis! Vor jeder Reinigung und
P ege ist die Dunstabzugshaube
durch Ziehen des Netzsteckers oder
Ausschalten der Sicherung stromlos zu
machen.
Die Dunstabzugshaube muss sowohl innen
als auch außen häu g gereinigt werden
(etwa in denselben Intervallen, wie die
Wartung der Fett lter). Zur Reinigung ein
mit üssigem Neutralreiniger getränktes
Tuch verwenden. Keine Produkte
verwenden, die Scheuermittel enthalten.
KEINEN ALKOHOL VERWENDEN!
Hinweis! Nichtbeachtung dieser
Anweisungen zur Reinigung des
Gerätes und zum Wechsel bzw. zur
Reinigung der Filter kann zum Brand
führen. Diese Anweisungen sind
unbedingt zu beachten!
Der Hersteller übernimmt keine Haftung
für irgendwelche Schäden am Motor oder
Brandschäden, die auf eine unsachgemäße
Wartung oder Nichteinhaltung der oben
angeführten Sicherheitsvorschriften
zurückzuführen sind.
11
DEUTSCH
4.2 Aktivkohle lter - Type 20 LONG LIFE
- Der waschbare Aktivkohle lter
Der Aktivkohle lter wird alle zwei Monate
in warmem Wasser und geeigneten
Waschmitteln oder in der Spülmaschine
bei 65°C gewaschen (in diesem Fall
den ollständigen Spülzyklus – ohne
zusätzliches Geschirr im Inneren der
Geschirrspülmaschine - einschalten).
Das überschüssige Wasser entfernen, ohne
dabei den Filter zu beschädigen; danach
das Vlies aus dem Plastikrahmen entfernen
und dieses bei 100° für 10 Minuten in den
Ofen legen, um es vollständig zu trocknen.
Das Vlies muss alle 3 Jahre ausgewechselt
werden und weiterhin jedes Mal dann, wenn
es beschädigt ist.
4.3 Type 15 - Der NICHT waschbare
Aktivkohle lter
Je nach der Benetzungsdauer des Herdes
und der Häu gkeit der Reinigung des
Fett lters tritt nach einer mehr oder weniger
langen Benutzungsdauer die Sättigung des
Aktivkohle lters auf. Auf jeden Fall muß
der Filtereinsatz mindestens alle 4 Monate
ausgewechselt werden.
Er kann NICHT gereinigt oder erneut
aktiviert werden.
(1*)
(2*)
(3**)
(4**)
(*) Type 20
(**) Type 15 - Type 20
4.4 Regenerierbarer Aktivkohle lter
Der Kohle lter muss alle zwei Monate (bzw.
wenn das System zur Anzeige der Filtersätt-
igung - soweit am entsprechenden Modell
vorhanden - dies anzeigt) regeneriert werden,
dabei ist der im Folgenden angeführte Vorgang
zu befolgen:
1. Das Haushaltsgerät vom Stromnetz tren-
nen.
2. Die Filterober äche mit einem feuchten
Tuch reinigen, um die Fettablagerungen an
der Ober äche zu beseitigen.
3. Den Filter bei 200 Grad 45 Minuten lang in
den Ofen legen.
4. Den Ofen ausschalten und eine Stunde
abwarten, dann den Filter entnehmen.
Achtung! Vor Berühren des Filters sicherstel-
len, dass er abgekühlt ist.
Type SUPCHARC-E
www.aeg.com
12
5. BEDIENELEMENTE
Die Dunstabzugshaube ist mit einer
Bedienungsblende ausgestattet, die mit
einer Steuerung für die Ansaugstärke bzw.
-geschwindigkeit, sowie einer Steuerung
zur Einstellung der Arbeitsplatzbeleuchtung
versehen ist. Bei starker Dampfentwicklung
die höchste Betriebsstufe einschalten. Es
wird empfohlen, die Dunstabzugshaube
schon fünf Minuten vor Beginn des
Kochvorganges einzuschalten und sie nach
dessen Beendigung noch ungefähr 15
Minuten weiterlaufen zu lassen.
Auf der Vorderseite des Gerätes be nden
sich die Schalter:
T6
1 T2 T3 T4 T5 T6 T7 T8 T9
2 3 4 5 6 7 8 9
1 ON/OFF-Taste für Geschwindigkeit
Ein/Aus-Taste für Bedientafel
2 Taste Geschwindigkeitsstufe
(Leistung) 1
3 Taste Geschwindigkeitsstufe
(Leistung) 2
4 Taste Geschwindigkeitsstufe
(Leistung) 3
5 Taste Geschwindigkeitsstufe
(Leistung) 4
Hinweis: Die Geschwindigkeitsstufe
4 bleibt für 5 Minuten eingeschaltet,
danach schaltet das Gebläse
automatisch auf die vorherige
Geschwindigkeitsstufe
6 Funktionstaste "Breeze"
(Raumlüftung)
Die Dunstabzugshaube schaltet
sich ein und läuft mit der niedrigen
Geschwindigkeitsstufe (Leistung) für 60
Minuten, danach schaltet sie sich ab.
7 Kontroll- und Ein/Aus-Taste für die
Filtersättigung
8 Funktionsanzeige Hob
2
Hood
9 ON/OFF-Taste für Licht
Funktion Aktivierung - Deaktivierung
Bedienfeld
Bei Dunstabzugshaube im Standby 1 , alle
LEDS schalten sich aus, die Bedientafel ist
deaktiviert.
Bei Dunstabzugshaube im Standby 1 , alle
LEDS schalten sich aus, die Bedientafel ist
deaktiviert.
Funktion Aktivierung - Deaktivierung
Filtersättigungskontrolle
Bei Dunstabzugshaube in Standby die
Taste 5 für mindestens 4 Sekunden
drücken
Taste 7 beginnt zu blinken, um
anzuzeigen, dass die Sättigungskontrolle
des Aktivkohle lters eingeschaltet ist.
Taste 7 beginnt zu leuchten, um
anzuzeigen, dass die Sättigungskontrolle
des Aktivkohle lters deaktiviert ist.
Funktion Kontrolle und Reset
Filtersättigung
In regelmäßigen Abständen je nach dem,
wie häu g die Dunstabzugshaube läuft,
leuchtet die Taste 7 , um anzuzeigen,
dass die Filter gemäß den Anweisungen in
den entsprechenden Abschnitten gewartet
werden müssen.
Taste 7 leuchtet: Die Fett lter müssen
gewartet werden.
Taste 7 blinkt: Die Aktivkohle lter müssen
gewartet werden.
Reset Filtersättigungsanzeige
Bei Dunstabzugshaube in Standby die
Taste 7 für mindestens 4 Sekunden
drücken.
Nötigenfalls den Vorgang wiederholen.
13
DEUTSCH
5.1 Hob
2
Hood
Die Haube ist mit einer Link-Funktion
“ohne Kabel” (wireless/drahtlos) mit einem
Kochfeld für die automatische Anpassung
der am besten geeigneten Geschwindigkeit
ausgestattet. Konsultieren Sie die
Bedienungsanleitung des Kochfelds, um
die Präsenz und die Kompatibilität dieser
Funktion zu überprüfen. Im Falle einer
allersten Verbindung mit dem Stromnetz
oder eines plötzlichen Stromausfalls
(Blackout), warten Sie 1 Minute, damit
die Haube den Anschluss an das
Kochfeld wieder herstellen kann. Sobald
die Dunstabzugshaube in der Funktion
Hob
2
Hood läuft, leuchtet die Taste 8 .
6. BELEUCHTUNG
Die Haube ist mit einem auf der
Leuchtdiodentechnologie basierten
Beleuchtungssystem ausgestattet.
Die LEDs ermöglichen eine optimale
Beleuchtung der Koch äche. Sie haben
eine zehnfache Lebensdauer
gegenüber traditionellen Leuchten und
bieten eine Energieersparnis bis zu 90%.
Achtung! Nicht direkt in das LED Licht
schauen.
Für den Wechsel der Lampen kontaktieren
Sie das zuständige Zentrum für den
Austausch.
www.aeg.com
14
POUR DES RÉSULTATS PARFAITS
Merci d’avoir choisi ce produit AEG. Nous l’avons conçu pour qu’il vous offre des
performances irréprochables pour longtemps, en intégrant des technologies innovantes qui
vous simpli ent la vie grâce à des caractéristiques que vous ne trouverez pas forcément
sur des appareils ordinaires. Veuillez prendre quelques instants pour lire cette notice a n
d’utiliser au mieux votre appareil.
Visitez notre site Internet pour :
Obtenir des conseils d’utilisation, des brochures, de l’aide, des informations :
www.aeg.com
Enregistrer votre produit pour obtenir un meilleur service :
www.aeg.com/productregistration
Acheter des accessoires, consommables et pièces de rechange d’origine pour
votre appareil :
www.aeg.com/shop
EN MATIÈRE DE PROTECTION DE L’ENVIRONNEMENT
Recyclez les matériaux portant le symbole . Déposez les emballages dans les
conteneurs prévus à cet effet. Contribuez à la protection de l’environnement et à votre
sécurité, recyclez vos produits électriques et électroniques. Ne jetez pas les appareils
portant le symbole avec les ordures ménagères. Emmenez un tel produit dans votre
centre local de recyclage ou contactez vos services municipaux.
SERVICE APRÈS-VENTE
N’utilisez que des pièces de rechange d’origine.
Avant de contacter le service, assurez-vous de disposer des informations suivantes :
Vous trouverez ces informations sur la plaque signalétique. Modèle, PNC, numéro de série.
Avertissement/Attention : consignes de sécurité.
Sous réserve de modi cations.
INFORMATION DE SÉCURITÉ
Avant toute opération de nettoyage ou d’entretien, débranchez
l’alimentation électrique en retirant la che ou en coupant l’interrupteur
général. Utilisez de gants de travail pour toute opération de nettoyage
ou d’entretien. L’appareil peut être utilisé par les enfants âgés pas moins
de 8 ans et les personnes ayant des capacités réduites physiques,
sensorielles ou mentales, ou sans l’expérience ou les connaissances
nécessaires, uniquement sous surveillance ou après ils ont reçu des
instructions relatives à l’utilisation en sécurité de l’appareil et ont compris
les dangers inhérents. Les enfants doivent être surveillés pour s’assurer
qu’ils ne jouent pas avec l’appareil. Le nettoyage et l’entretien ne doivent
pas être effectués par des enfants sans surveillance. La pièce doit avoir
une aération suf sante lorsque la hotte est utilisée conjointement avec
d’autres appareils fonctionnant au gaz ou autres combustibles.
FR MANUEL D’UTILISATION
15
FRANÇAIS
La hotte doit être régulièrement nettoyée à la fois à l’intérieur et à
l’extérieur (AU MOINS UNE FOIS PAR MOIS); cela devrait se faire en
conformité avec les instructions d’entretien dans ce manuel. Le non
respect des instructions expressément fournies dans ce mode d’emploi
concernant le nettoyage de la hotte et des ltres peut provoquer des
risques d’incendie.
Il est strictement interdit de amber les aliments sous la hotte.
1.
CONSIGNES DE SÉCURITÉ
L’utilisation d’une amme nue est
dommageable pour les ltres et peut causer
un incendie, par conséquent, elles doivent
être évitées de toute façon.
La friture doit être faite avec soin a n de
s’assurer que l’huile surchauffée ne prend
pas feu.
AVERTISSEMENT: Lorsque la table
de cuisson est en fonctionnement, les
parties accessibles de la hotte peuvent
devenir très chaudes.
Pour le remplacement de la lampe, utilisez
uniquement le type de lampe spéci é dans
la section remplacement/maintenance
lampe dans ce manuel.
Attention! Ne pas brancher l’appareil
au réseau électrique avant que
l’installation est complètement
terminée.
En ce qui concerne les mesures techniques
et de sécurité à prendre pour l’évacuation
des fumées, respectez strictement les
dispositions des règlements locales.
L’air d’évacuation ne doit pas être envoyé
dans un conduit utilisé pour évacuer
les fumées produites par les appareils
de combustion de gaz ou d’autres
combustibles.
Ne pas utiliser ou laisser la hotte sans
les lampes correctement montées, car
un éventuel risque de choc électrique est
possible.
N’utilisez jamais la hotte sans la grille
montée correctement!
La hotte ne doit JAMAIS être utilisée
comme une surface d’appui, sauf indication
expresse.
Utilisez uniquement les vis de xation
fournies avec le produit pour l’installation,
ou, si non fournies, acheter le type correct
de vis.
Utilisez la longueur correcte pour les vis qui
sont identi ées dans le Guide d’installation.
En cas de doute, consultez votre centre de
service agréé ou du personnel quali é.
ATTENTION! Le défaut d’installer
les vis et les dispositifs de fixation
conformément à ces instructions peut
entraîner des risques électriques.
2.UTILISATION
La hotte est utilisée pour aspirer les fumées
et les vapeurs causés par la cuisine.
Le manuel d’installation attaché indique la
version d’utiliser pour votre modèle, soit
la version avec aspiration et évacuation
externe ou la version avec ltration et
recirculation interne .
3.INSTALLATION
La tension électrique doit correspondre à la
tension reportée sur la plaque signalétique
située à l’intérieur de la hotte. Si une prise
est présente, branchez la hotte dans une
prise murale conforme aux normes en
vigueur et placée dans une zone accessible
également après l’installation. Si aucune
prise n’est présente (raccordement direct
au circuit électrique), ou si la prise ne
se trouve pas dans une zone accessible
également après l’installation, appliquez
un disjoncteur normalisé pour assurer
de débrancher complètement la hotte
du circuit électrique en conditions de
catégorie surtension III, conformément aux
règlementations de montage.
Avant de rebrancher le circuit de
la hotte à l’alimentation électrique
et d’en vérifier le fonctionnement
correct, contrôlez toujours que le câble
d’alimentation soit monté correctement.
www.aeg.com
16
La distance minimum entre la super cie
de support des récipients sur le dispositif
de cuisson et la partie la plus basse de la
hotte de cuisine ne doit pas être inférieure à
50cm dans le cas de cuisinières électriques
et de 65cm dans le cas de cuisinières à gaz
ou mixtes.
Si les instructions d’installation du dispositif
de cuisson au gaz spéci ent une plus
grande distance, il faut en tenir compte.
4. ENTRETIEN
Attention! Avant toute opération de
nettoyage ou d’entretien, débrancher la
hotte du circuit électrique en enlevant
la prise ou en coupant l’interrupteur
général de l’habitation.
La hotte doit être régulièrement nettoyée
à l’intérieur et à l’extérieur (au moins à la
même fréquence que pour l’entretien des
ltres à graisse). Pour le nettoyage, utiliser
un chiffon humidi é avec un détergent
liquide neutre. Ne pas utiliser de produit
contenant des abrasifs. NE PAS UTILISER
D’ALCOOL!
Attention! Il y a risque d’incendie si
vous ne respectez pas les instructions
concernant le nettoyage de l’appareil
et le remplacement ou le nettoyage du
ltre.
La responsabilité du constructeur ne
peut en aucun cas être engagée dans le
cas d’un endommagement du moteur ou
d’incendie liés à un entretien négligé ou
au non respect des consignes de sécurité
précédemment mentionnées.
4.1 Filtre anti-graisse - Le ltre anti-
graisse doit être nettoyé une fois par mois
avec des détergents non agressifs, à la
main ou dans le lave-vaisselle à faibles
températures et cycle rapide. Le lavage
du ltre anti-graisse au lave-vaisselle peut
en provoquer la décoloration. Toutefois,
les caractéristiques de ltrage ne seront en
aucun cas modi ées.
17
FRANÇAIS
4.2 Filtre à charbon actif - Type 20 LONG
LIFE - Filtre à charbon actif lavable
Le ltre à charbon peut être nettoyé tous
les deux mois avec de l’eau chaude et au
moyen de détergents appropriés ou dans le
lave-vaisselle à 65°C (dans le cas de lavage
dans le lave-vaisselle suivre un cycle de
lavage complet sans vaisselle à l’intérieur).
Enlever l’eau qui excède en faisant attention
de ne pas abîmer le ltre, ensuite enlever
le coussinet posé à l’intérieur du châssis
en plastique et le mettre dans le four
pendant 10 minutes à 100°C pour le sécher
nitivement. Remplacer le coussinet tous
les 3 ans et chaque fois que le ltre sera
abîmé.
4.3 Type 15 - Filtre à charbon actif NON
lavable
La saturation du charbon actif se constate
aprés un emploi plus ou mois long, selon
la fréquence d’utilisation et la régularité du
nettoyage du ltre à graisses. En tout cas, il
est nécessaire de changer le ltre aprés, au
maximum, quatre mois.
IL NE PEUT PAS être nettoyé ou régénéré.
(1*)
(2*)
(3**)
(4**)
(*) Type 20
(**) Type 15 - Type 20
4.4 Filtre à charbon régénérable
Le ltre au carbone doit être régénéré tous les
deux mois (ou quand le système d’indication
de saturation des ltres - si prévu sur le modèle
acquis - l’exige) et en respectant la procédure
indiquée à la suite :
1. Débrancher l’appareil ménager du secteur
2. Nettoyer la surface du ltre avec un chiffon
humide a n de retirer le dépôt de graisse
super ciel.
3. Mettre le ltre au four à 200 degrés pendant
45 minutes.
4. Éteindre le four et attendre une heure avant
d’extraire le ltre.
Attention ! Avant de toucher le ltre, s’assurer
qu’il est froid.
Type SUPCHARC-E
www.aeg.com
18
5. COMMANDES
La hotte est équipée d’un panneau de
contrôle doté d’une commande de vitesse
d’aspiration et d’une commande d’éclairage
du plan de cuisson.
Utiliser la puissance d’aspiration maximum
en cas de concentration très importante
des vapeurs de cuisson. Nous conseillons
d’allumer la hotte 5 minutes avant de
commencer la cuisson et de la faire
fonctionner encore pendant 15 minutes
environ après avoir terminé la cuisson.
Le bandeau de commandes de la hotte se
trouve sur l’avant de l’appareil:
T6
1 T2 T3 T4 T5 T6 T7 T8 T9
2 3 4 5 6 7 8 9
1 Touche ON/OFF vitesse
Touche activation-désactivation du
panneau de contrôle
2 Touche vitesse (puissance)
d'aspiration 1
3 Touche vitesse (puissance)
d'aspiration 2
4 Touche vitesse (puissance)
d'aspiration 3
5 Touche vitesse (puissance)
d'aspiration 4
Remarque : la vitesse (puissance)
d'aspiration 4 reste activée pendant
5 minutes, puis revient à la
programmation précédente.
6 Touche Fonction "Breeze"
(Ventilation ambiante)
La hotte s’allume à basse vitesse
(puissance) d’aspiration pendant 60
minutes puis s’éteint.
7 Touche de contrôle et activation-
désactivation saturation des ltres
8 Indicateur Fonction Hob
2
Hood
9 Touches ON/OFF éclairage
Touche Activation-Désactivation du
panneau de contrôle
Quand la hotte est en mode veille,
appuyer sur la touche 1 , toutes les LEDS
s'éteignent : le panneau de contrôle est
désactivé.
Appuyer à nouveau sur la touche 1 ,
toutes les LEDS s'éclairent : le panneau de
contrôle est activé.
Fonction Activation-Désactivation du
contrôle de saturation du ltre à charbon
Quand la hotte est en mode veille, appuyer
sur la touche 5 plus de 3 secondes
La touche 7 clignote pour indiquer que la
fonction de contrôle de la saturation du ltre
à charbon a été activée.
La touche 7 s'éclaire en mode xe pour
indiquer que la fonction de contrôle de
la saturation du ltre à charbon a été
désactivée.
Fonction de contrôle et de réinitialisation
de la saturation des ltres
À intervalles réguliers, en fonction du temps
d'utilisation de la hotte la touche 7 s'éclaire
pour signaler l'exigence de changer les
ltres en suivant les instructions des
paragraphes respectifs.
Touche 7 éclairée en mode xe : effectuer
l'entretien du ltre à graisses
Touche 7 clignotante : effectuer l'entretien
du ltre à charbon.
19
FRANÇAIS
Réinitialisation du voyant de saturation
des ltres
Quand la hotte est en mode veille, appuyer
sur la touche 7 plus de 3 secondes.
Répéter l'opération si nécessaire.
5.1 Hob
2
Hood
La hotte est équipée d’une fonction de
connexion sans l avec la plaque de
cuisson pour le réglage automatique de
la vitesse la plus appropriée. Reportez-
vous au manuel d’instructions de la plaque
de cuisson pour véri er la présence et la
compatibilité de cette fonction
Dans le cas de la première connexion au
réseau d’alimentation ou d’une interruption
brusque du courant électrique (panne
généralisée), attendre 1 minute pour
permettre à la hotte de rétablir la connexion
avec la plaque de cuisson. Quand la hotte
fonctionne en mode Hob
2
Hood la touche 8
s'éclaire.
6. ÉCLAIRAGE
La hotte est dotée d’un système d’éclairage
basé sur la technologie LED.
Les LEDS garantissent un éclairage
optimal, une durée jusqu’à 10 fois
supérieures aux ampoules traditionnelles et
permettent une épargne de 90% en énergie
électrique.
Attention! Ne regardez pas
directement la lumière provenant des
LED.
Pour remplacer les lampes, contactez
le centre service agréé pour pièces de
rechange.
www.aeg.com20
VOOR PERFECTE RESULTATEN
Bedankt dat u voor dit AEG product heeft gekozen. Dit apparaat is ontworpen om vele jaren
uitstekend te presteren, met innovatieve technologieën die het leven gemakkelijker helpen
maken – functies die gewone apparaten wellicht niet hebben. Neem een paar minuten de
tijd om het door te lezen zodat u er optimaal van kunt pro teren.
Ga naar onze website voor:
Advies over gebruik, brochures, het oplossen van problemen en
onderhoudsinformatie:
www.aeg.com
Registreer uw product voor een betere service:
www.aeg.com/productregistration
Koop accessoires, verbruiksartikelen en originele reserveonderdelen voor uw
apparaat:
www.aeg.com/shop
MILIEUBESCHERMING
Recycle de materialen met het symbool . Gooi de verpakking in een geschikte
verzamelcontainer om het te recyclen. Help om het milieu en de volksgezondheid te
beschermen en recycle het afval van elektrische en elektronische apparaten. Gooi
apparaten gemarkeerd met het symbool niet weg met het huishoudelijk afval. Breng het
product naar het milieustation bij u in de buurt of neem contact op met de gemeente.
KLANTENSERVICE
Wij raden altijd het gebruik van originele onderdelen aan.
Zorg er als u contact opneemt met de klantenservice voor dat u de volgende gegevens bij
de hand hebt.
De informatie staat op het typeplaatje. Model, productnummer, serienummer.
Waarschuwing - Belangrijke veiligheidsinformatie.
Wijzigingen voorbehouden.
VEILIGHEIDSINFORMATIE
Alvorens reinigings- of onderhoudswerkzaamheden uit te voeren, de
kap ontkoppellen van de elektrische voeding door het verwijderen van
de stekker of door het loskoppelen van de algemene schakelaar van
de woning. Draag bij alle installatie- en onderhoudswerkzaamheden
werkhandschoenen. Deze apparatuur kan worden gebruikt door kinderen
vanaf de leeftijd van 8 jaar en door mensen met beperkte lichamelijke,
zintuiglijke of verstandelijke vermogens of met gebrek aan ervaring en
behoefte kennis, mits ze onder juist toezicht zijn of instructies hebben
gekregen over hoe het apparaat veilig te gebruiken en zich bewust zijn van
de verwante gevaren. Kinderen moeten in de gaten gehouden worden,
om te voorkomen dat ze met het apparaat gaan spelen.
Schoonmaak en onderhoud mag niet worden uitgevoerd door kinderen
zonder toezicht. De ruimte moet voldoende geventileerd worden,
wanneer de afzuigkap wordt gebruikt samen met andere apparaten die
NL GEBRUIKSAANWIJZING
1 / 1

AEG DBB 5660 HM Používateľská príručka

Kategória
Odsávače pár
Typ
Používateľská príručka

V iných jazykoch