Sony KV-34FQ75K Návod na obsluhu

Instruction Manual

KV-34FQ75 K

4-205-685-93

R

Trinitron Colour

Television

Instrukcja obsługi

Návod k obsluze

Kezelési útmutató

Инструкции за употреба

Инструкция по зксплуатации

GB

PL

CZ

HU

BG

RU

420568593

Sony Manufacturing Company UK

Pencoed Technology Park

Pencoed

Mid Glamorgan

UK CF35 5HZ Printed in UK

Сони Мзнъюфзкчоринг Компани ЮК

Технологический Парк Пенкоед,

Пенкоед,

Мид Глзморган,

СФ35 5Х3, ВеликоБритания Отпечатано в ВеликоБритании

GB

Safety Information

For your safety

This set is to operate on a 220-240V AC supply

only. Take care not to connect too many

appliances to the same power socket as this could

result in fire or electric shock.

For environmental and safety reasons, it is

recommended that the TV set is not left in

standby mode when not in use. Disconnect

from the mains.

Never push objects of any kind into the set as

this could result in a fire or electric shock. Never

spill liquid of any kind on the set. If any liquid or

solid object does fall through, do not operate the

TV. Have it checked immediately by qualified

personnel.

Do not open the cabinet and the rear cover of the

TV. Refer to qualified service personnel only.

To prevent fire or shock hazard, do not expose

the TV to rain or moisture.

For your own safety, do not touch any part of the

TV, power lead or aerial lead during lightning

storms.

Do not cover the ventilation openings of the TV

For ventilation, leave a space of at least 10cm all

around the set.

Never place the TV in hot, humid or excessively

dusty places. Do not install the TV where it may

be exposed to mechanical vibrations.

To prevent fire, keep inflammable objects or

naked lights (eg candles) away from the TV.

Clean the TV with a soft, lightly dampened cloth.

Do not use benzine, thinner or any other

chemicals to clean the TV. Do not scratch the TV

screen. As a safety precaution, unplug the TV

before cleaning it.

Pull out the power lead by the plug. Do not pull

on the power lead itself.

Take care not to place heavy objects on the power

lead as this could result in damage.

We recommend you wind any excess lead around

the holders provided on the rear of the TV.

Place the TV on a secure stable stand. Do not

allow children to climb on to it. Do not place the

TV on its side or face up.

Unplug the power lead before moving the TV.

Avoid uneven surfaces, quick steps or excessive

force. If the set has been dropped or damaged,

have it checked immediately by qualified

service personnel.

Do not cover the ventilation openings of the TV

with items such as curtains or newspapers etc.

1

Safety Information

Always use TV stands that are strong and stable enough to support the weight and size of this TV. Due to the unique floating

design of this TV, Sony highly recommend you use their designated stand, SU-34FQ1. If this recommended option is not taken,

it is vitally important to ensure that any cabinet or table has a large enough surface area to accommodate all three legs of the TV

without any overlap.

Safety Information

Table of Contents

Installation

1. Checking the accessories supplied

2. Inserting batteries into the remote control

3. Connecting the TV

4. Switching on the TV

5. Using the joystick

6. Tuning your TV

7. Finding your video channel

2

3

4

5

Operation

Overview of the TV set buttons

Overview of the remote control buttons

NexTView

Teletext

Using Multi PIP

Operating PAP (Picture and Picture)

Using the TV menu system

Adjusting the picture and sound

Using the Features menu

Changing the screen size

Re-arranging the TV channels

Manually tuning the TV

Naming a channel

Skipping programme positions

Using the ‘Further Programme Preset’ feature

Selecting the ‘Demo’ feature

Adjusting the picture rotation

Adjusting the picture geometry for an RGB source

Inputting your personal ID

Presetting and naming input signals

6

7

8

10

12

13

15

16

17

18

19

20

Additional Equipment

Connecting additional equipment to the TV

Additional information when connecting equipment

Smartlink

Remote control of other Sony equipment

21

22

Additional Information

Specifications

Channel Display Table

Troubleshooting

23

24

2

Follow steps 1-7 to install the TV and

view TV programmes.

Installation

1. Checking the accessories supplied

2. Inserting batteries into the remote control

Batteries

Always observe the correct polarity when inserting batteries.

Always remember to dispose of used batteries in an environmentally friendly way.

-

+

-

Remote control

+

-

+

3

Installation

3. Connecting the TV

OUT

IN

AERIAL

ANTENNA

AC IN

The scart lead is

optional. If it can be

used however, this

additional

connection can

improve picture and

sound quality when

in play mode.

1. Connect your existing aerial lead to the socket marked on the rear of the TV set.

Connecting an aerial to your TV

Connecting an aerial and VCR to your TV

1. Connect your existing aerial lead to the RF IN socket on your VCR as shown.

2. Connect the VCR aerial lead from the RF OUT socket on the back of the VCR to the aerial

socket on the back of the TV as shown.

3. Connect the scart lead (if used) to the AV2 socket on the rear of the TV set.

4. Connect the VCR set to the mains and switch on.

5. Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables the TV

set to locate and store the video channel during the ‘Tuning your TV’ procedure on page 5.

If you are not connecting

your TV to a VCR,

please connect the aerial

lead (as shown left) and

proceed to section

‘4.Switching on the TV’.

If you are connecting

your TV to a VCR please

refer to the section

below.

existing aerial lead

scart lead

(not supplied)

4

Installation

1. Connect the TV plug to the mains socket (220-240V AC, 50Hz).

2. Push in the on/off button on the front of the TV.

If the standby mode indicator on the front of the TV is lit, press the TV button on

the remote control to switch on the TV set. Please be patient as the picture may take a

few moments to appear on the TV screen.

4. Switching on the TV

5. Using the joystick

/

To select an item in a menu press

the OK button down in the middle.

To move around the menus press

the relevant arrow button.

Moving the joystick Pressing the joystick

5

Installation

Before you tune your TV, you will be asked to set your language and country.

6. Tuning your TV

:

Language/Country

Language

Country

Select Country:

Confirm: OK

Greece

Great Britain

Germany

France

Finland

Denmark

Czech Rep.

Language/Country

Language

Country

Select Language:

Confirm: OK

Italiano

Français

Español

English

Deutsch

Dansk

Čeština

1. The Language/Country menu appears on the TV screen with the

word ‘English’ highlighted.

2. Press the v or V buttons on the remote control to select your

chosen language then press the OK button to confirm.

3. Press v or V to select the country in which you wish to operate

the TV then press the OK button to confirm your choice. Select

‘OFF’ if you do not want your channels stored in a given channel

sequence starting from programme position 1.

4. The ‘autotune’ menu appears on the TV screen in your selected

language. Press the OK button to confirm.

5. Ensure the aerial is connected as instructed, then press the OK

button to confirm. The TV starts to automatically search and store

all available channels for you. This may take a few minutes -

please be patient and do not press any buttons.

6. Once the TV has tuned all available channels the ‘Programme

Sorting’ menu appears on the TV screen enabling you to change

the order of the channels on your TV. If you wish to change the

channel order, press the v or V buttons to select the channel you

want to move, then press B. Press the v or V buttons to select the

new programme number position for your selected channel then

press the OK button to confirm. The selected channel now moves

to its new programme position and the other channels move

accordingly. Repeat this procedure if you wish to sort the order of

other channels on your TV.

7. Press the MENU button to remove the menu from the TV screen.

8. Press the PROGR+/- or the numbered buttons to view the TV

channels.

Note: If you would like to stop the autotune process at any stage,

press the OK button.

If you have connected a VCR to your TV, you now need to find your video channel.

1. Press the PROGR+/- buttons on the TV remote control until your video picture appears on the TV screen.

Note: If you wish to move your video channel to a different programme position, refer to the ‘Re-arranging the TV channels’

section of this instruction manual.

7. Finding your video channel

Programme Sorting

Select Prog: Confirm:

PROG CH LABEL

Programme Sorting

Select Position: Move: OK

C03 TV 5

PROG CH LABEL

1

2

3

4

5

6

7

8

9

10

11

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

1

2

3

4

5

6

7

8

9

10

11

1

2

3

6

5

4

7 8

9

0

6

Operation

Overview of the TV set buttons

Volume control buttons.

Press to increase (+) /decrease

(-) volume.

Video input button.

Press to select the input

signals from VCR etc.

Programme Up (+) or

Down (-) buttons.

Press to select TV

channels.

Master Reset button.

Press to return the picture and sound

levels to factory settings. The Sony logo

will appear on the screen followed by the

‘Autotune’ screen. If you do not wish to

retune your TV, press the b button on

your remote control.

Push up on the control panel (as shown)

to access the front input sockets and TV

buttons.

The control panel drops down.

7

Operation

Overview of the remote control buttons

To temporarily switch off TV

Press to temporarily switch off TV. Press again to switch on

from standby mode. To save energy, we recommend

switching off completely when TV is not in use.

NOTE: After 15-30 minutes without a TV signal and without

any button being pressed, the TV switches automatically into

standby mode.

To reveal on screen information

Press to reveal all on-screen indications. Press again to

cancel. In Teletext mode, press to reveal the index page

(normally page 100).

To select input signal or freeze teletext

Press to select inputs from the TV sockets (see Using

Optional Equipment section). In Teletext mode, press to

freeze the displayed page. Press once again to cancel.

Please refer to the ‘Operating PAP’ section of this

instruction manual for details.

To return to previous channel

Press to return to the previous channel you were watching.

Note: This can be done only after watching the present

channel for 5 seconds.

Press to switch Multi PIP mode on and off.

To change screen format

Press repeatedly to select 4:3 mode or 16:9 mode (imitation

of wide screen format).

Fastext keys

See Teletext section of manual for details.

To select menu items

Use the OK button and arrow keys to select the options

available in the menu system of this TV.

To select channels

Press to select channels.

To display the menu

Press if you wish to use the TV menu system. Press again to

remove the menu from the TV screen.

To mute sound

Press to mute TV sound. Press again to restore the

sound.

To return to TV mode

Press to return to the normal operation from teletext

mode or standby mode.

To select Teletext

Press to switch Teletext on and off.

To select Electronic Programme Guide

(EPG)

Press to switch EPG on and off.

To freeze the picture

Press if you wish to make a note of some

information on the TV screen eg a telephone

number. Press again to return to normal TV mode.

To select channels

Press the numbered buttons to select channels.

For double digit programme numbers, e.g.23, press

-/-- first, then the buttons 2 and 3.

To display picture menu

Press to change the picture settings. Press the OK

button to remove the display.

To display sound menu

Press to change the sound settings. Press the OK

button to remove the display.

To display the Channel Table

Press the OK button. Press v or V to select the

desired channel then press B to confirm.

To adjust TV volume

Press to adjust the volume of the TV.

To reset to factory set levels.

Open the remote control lid and press to return

picture and sound settings to factory-set levels.

After the ‘Installation’ menu has appeared on

the TV screen, refer to the ‘Selecting Language

and Country’ section of the instruction manual

to change your choice of language and country

if desired.

To display the time.

Open the remote control lid and press to display the

time on screen. Press again to cancel.

To operate video equipment

Open the remote control lid and press these buttons to

operate your video equipment (please refer to your

VCR manual).

To operate other Sony equipment.

Open the remote control lid and set the selector VTR 1234

DVD according to the equipment you want to control:

VTR 1: Beta VCR

VTR 2: 8mm VCR

VTR 3: VHS VCR

VTR 4: Digital Video (e.g.DCR-VX 1000/9000E, VHR-1000)

DVD: Digital Video Disk player

Use the buttons on the remote control to operate the

equipment.

8

Operation

NexTView is an on-screen electronic programme guide, providing you with programme information for different

broadcasters.

NexTView*

Selecting your NexTView provider

Your TV set automatically selects the best NexTView provider for you. This provider is available about 30 minutes after the

channel tuning. You can however change this selection of provider if you wish.

1. Press the MENU button on the remote control to display the menu on the TV screen.

2. Press the v or V buttons to select the symbol on the menu screen then press B to enter the ‘Set Up’ menu.

3. Press v or V to highlight ‘Select NexTView’ then press B to confirm. A list is displayed containing all available

NexTView providers.

4. Press v or V to select the desired NexTView provider then press the OK button to store.

5. Press the MENU button to remove the menu from the TV screen.

7

Tu e

07 Tue

12:38

8

Wed

10

Fri

11

Sat

12

Sun

13

Mon

9

Thu

12

SWISS

Star Wars

Super RTL

Fantasy film, USA, 1996

Werner - Beinhart

Pro 7

Flui grüsst den Rest der Welt

Kabel 1

Once upon a time in the West

Euronews

International News

RTL Plus

10:35 - 12:45

10:20 - 12:00

10:45 - 10:50

11:00 - 11:20

11:45 - 12:50

TXT TPS / RINGIER

Tue 07. 04 .98

Displaying NexTView

1. Press the button repeatedly on the remote control to switch NexTView on and off.

* In some cases, you may also need to press the b button to display the Sony electronic programme guide.

2. Press the v, V, b or B buttons to move the cursor around the screen.

3. Press the OK button to confirm a selection.

a. If you press the OK button in the date, time or icon (themes) columns, you change the programme list according to the

selection.

b. If you press the OK button in the programme list, you directly display the channel if the broadcast is currently running,

or, you display the ‘Long Info’ menu if the broadcast is running at some future time.

Index

full selection list

personal selection

news broadcasts

movies

sports

entertainment

children

return to last menu

Using the ‘Individual Setting’ menu

You can make a personal list of the types of programmes you wish to view on the

programme guide.

1. Press the v or V buttons to select the icon then press B to display the ‘Individual

Setting’ menu.

2. Press v or V to select your chosen item on the screen then press the OK button to

confirm your choice.

3. Repeat step 2 for all the items you wish to have in your list.

4. When you have finished the list, press

B to select on the menu screen.

5. Press the OK button to return to the previous menu.

6. Press the v or V buttons to select the icon then press the OK button again to

activate your ‘Individual Setting’ filter.

Movie

Individual Setting

Comedy

Adult

News

Interview

Entertainment

* depending on availability of service

9

Using the ‘Long Info’ menu

With this ‘Long Info’ menu screen, you can set timers or record selected programmes.

1. Press v or V to select a future programme in the programme list column.

2. Press the OK button to display the ‘Long Info’ menu on the TV screen.

To set the timer

Press the b or B buttons to highlight the icon then press the OK button repeatedly to ‘set the timer’ or ‘cancel the timer’. If

you choose to set the timer, the programme is marked with a clock symbol and a message appears on the screen shortly before

the programme is due to start asking whether you wish to still view this programme.

To view the timer table

Press the b or B buttons to highlight the icon then press the OK button repeatedly to switch on/off the timer table. This table

shows the programmes on which you have already set a timer. (You can set a timer on up to 5 programmes).

Operation

NexTView

07 Tue

12:38

Address Mapping

The position of the addresses in the

OSDA is shown in the following diagram.

The position values of the DPW are set

to '0'.

If other values are set, the complete

combination will be scrolled.

Example:

if the DPWC is set to '63', the char-

Speed

Timer Prog

VPS/PDC

SP

VCR1

On

This channel has been set for a timer

First nextTView/EPG-Providers in Europe

SWISS TXT TPS / RINGIER nexTView

Tue 07. 04 .98

To record programmes*

* (only with Smartlink VCRs)

1. Connect your Smartlink VCR to the AV2 socket on your TV.

2. Press b or B to select then press the OK button to download the information to your VCR.

3. To set up the VCR:

VPS/PDC

Press b to select VPS/PDC then press the OK button repeatedly to select ‘On’ or ‘Off’. With this setting on you have the

guaranteed recording of the whole broadcast should there be a change in the TV programme. This only works if the selected

channel broadcasts a VPS/PDC signal.

Speed

Press V to select ‘Speed’ then press the OK button repeatedly to select between ‘SP’ for standard play or ‘LP’ for longplay.

With longplay you can record twice as much on a videotape. The picture quality however may suffer.

VCR Setup

Press V to select ‘VCR Setup’ then press the OK button repeatedly to select which VCR you wish to programme, namely

‘VCR1’ or ‘VCR2’.

4. Finally, press B to select the icon then press the OK button to remove the menu from the TV screen.

10

Operation

Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives

you information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext

errors.

Teletext

Switching Teletext on and off

1. Select the TV channel which carries the teletext service you want to view.

2. Press the button once for Picture and Teletext (P&T). The screen is divided in two,

with the TV channel in the right corner and the Teletext display on the left.

In P&T mode press then press PROGR+/- to change the channel of the TV

screen. Press b or B to change the size of the TV screen then press again

to resume normal teletext reception.

3. Press twice to get Teletext only.

4. Press three times for Mix mode.

5. Press a fourth time to switch off Teletext.

To exit Teletext mode at any time, press the button on the remote control.

Selecting a Teletext page

Input three digits for the page number using the numbered buttons on the remote control. If

you make a mistake, type in any three digits then re-enter the correct page number.

Using Other Teletext Functions

Selecting the next or preceding page

Press the or buttons on the remote control to select the previous or next page.

Selecting a sub page

A teletext page may consist of several sub pages. In this case an information line is displayed,

showing the number of subpages. Select the sub page by pressing v or V.

To freeze a Teletext page

Press the button to freeze the page. Press again to cancel the freeze.

Revealing the index page

Press the button to reveal the index page (normally page 100).

Using colour buttons to access pages (Fastext)

(only available if the TV station broadcasts Fastext signals)

When the colour coded menu appears at the bottom of a page, press a coloured button on the

remote control (green, red, yellow or blue) to access the corresponding page.

Using the feature ‘Page Catching’

1. Press the numbered buttons on the remote control to select a teletext page which has

several page numbers on it (eg the index page).

2. Press the OK button.

3. Press v or V to select the desired page number then press the OK button. The requested

page is displayed after some seconds.

Index

TELETEXT

Programme

News

Sport

Weather

25

153

101

98

Index

TELETEXT

Programme

News

Sport

Weather

25

153

101

98

Index

TELETEXT

Programme

News

Sport

Weather

25

153

101

98

m

216-02

01 03 04 05 06 07 0802

11

Operation

Teletext

Using the Teletext menu

1. With Teletext switched on, press the MENU button on the remote control to display the menu

on the TV screen.

2. Press v or V to select your chosen item on the screen then press B to display the relevant sub

menu.

3. To remove the Teletext menu from the screen, press the MENU button.

Top/Bottom/Full

The Top/Bottom/Full sub menu allows you to enlarge different sections of the Teletext page.

Press v to enlarge the upper half of the screen, Press V to enlarge the lower half. Press the OK

button to restore the page to normal size. Press b to return to the Teletext menu screen.

Text Clear*

*available on Teletext Only and Mix modes (Refer to ‘Switching Teletext on and off’)

Text Clear is a function that displays a TV channel while a Teletext page is being searched for.

Reveal

Some Teletext pages contain hidden information (eg for a quiz), which can be revealed.

Time Page*

*depending on availability of service,Time Page is available on Teletext Only and Mix modes.

Time Page allows a time-coded Teletext page (such as an alarm page), to be displayed at a set

time.

Top: Bottom: Full: OK

Teletext

Top / Bottom / Full

Text Clear

Reveal

Time Page

Page Overview

Select: Enter Menu:

1. Press the button on the remote control twice to select full screen text.

2. Press the MENU button to display the ‘Teletext’ menu.

3. Press v or V to highlight ‘Text Clear’ and press B to select.

4. The current TV channel is displayed. Once the text page has been found a blue symbol

will appear in the top left hand corner of the screen.

5. Press the button on the remote control to view the page.

1. In text mode press the MENU button on the remote control to access the ‘Teletext’ menu.

2. Press v or V to highlight ‘Reveal’ and press B to select. The hidden information is displayed

on the screen.

1. In Text mode press the MENU button on the remote control to access the ‘Teletext’ menu.

2. Press v or V to highlight ‘Time Page’ and press B to select. The ‘Time Page’ sub menu is

displayed.

3. Enter the desired page number using the numbered buttons on the remote control.

4. Enter the desired time using the remote control.

5. Press OK to confirm the settings. The TV will exit Teletext mode and the time will be

displayed in the top left hand corner of the screen. At the requested time the desired page is

displayed.

Time Page

PAGE TIME

Select Page: 0-9 Next:

- - : - -– – –

Page Overview*

*only available if TOP-Text is transmitted by the TV station.

In this menu the TOP-Text pages are divided into two columns, the first column showing ‘blocks’

of pages and the second showing ‘groups’ of pages.

1. Press b or B to select the first or second column.

2. Press v or V to select the relevant ‘group’ or ‘block’ of pages.

3. Press the OK button to display the chosen pages.

12

Operation

Using Multi PIP

Multi PIP (picture in picture) mode displays a succession of 12 still pictures and a 13th that is live. You can manually

select which channel you wish to watch, either full-screen or in the PIP mode.

Operating PAP (Picture and Picture)

This PAP feature divides the screen into two for watching two channels simultaneously (with a video source on one if

you want). The sound of the left screen comes through the TV loudspeakers, the sound of the right screen is selectable

via headphones.

1. Press the button on the remote control to select Multi PIP mode. 13 programme

positions appear on the screen with the current channel in the centre.

2. Press the PROGR+/- buttons repeatedly to select the next or preceding 12 programme

positions.

3. Press the v, V, b or B buttons to move within the 13 displayed channels.

4. Press the OK button to select the framed channel. This channel now moves to the centre.

5. Press the OK button again to display the selected channel or press to remove Multi PIP

mode from the TV screen.

Switching PAP on and off

Press once to display the screens and twice to switch PAP off.

Selecting sound for the headphones

With PAP switched on, refer to the ‘Adjusting the picture and sound’ section of this manual and

set ‘i Dual Sound’ to ‘PAP’.

Selecting a PAP source

Press M. The symbol M appears in the right screen. Select the desired source using the numbered

buttons (for a TV channel) or (for a video source).

Swapping screens

Press to swap the two screens.

Zooming the screens

Press the b or B buttons to change the size of the two screens.

03 05

01 06

11 09 08

02

10

07

13

12

04

13

Operation

The TV consists of a menu system which is based on a series of user friendly on-screen displays and menus. These displays will

help you get the most from your TV, helping you to change picture and sound settings, to alter the size of the TV picture and to

rearrange the TV channels etc.

Adjusting the picture and sound

The picture and sound are preset at the factory. You can however adjust them to suit your own taste.

Using the TV menu system

AI

On

Off

Picture Mode

Live

Personal

Movie

Game

Digital Mode

Normal

DRC 50

DRC 100

Contrast

Picture Adjustment

Select: Enter:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Reduction

Digital Mode

Colour Tone

Personal

On

DRC 100

Normal

Noise Reduction

High

Mid

Low

Auto

Off

1. Press the MENU button on the remote control to display the menu on the TV screen.

2. Press the v or V buttons to select for picture settings or for sound settings then press

B to enter either the ‘Picture Adjustment’ menu or the ‘Audio Adjustment’ menu.

3. Press the v or V buttons to select the item on the screen you wish to adjust then press B to

confirm. For a description of the menu items and their effects, see the table below.

4. Press the v, V, B or b buttons to adjust your selected item.

5. As soon as you have adjusted the item, press the OK button to store the new setting.

6. Repeat steps 3-5 if you wish to adjust any of the other items.

7. Press the MENU button to remove the menu from the TV screen.

Picture Control

Item Effect/Operation

Picture Mode V Live (for live broadcasts)

Personal (for individual settings)

Movie (for movie broadcasts)

v Game (for computer games)

Contrast Less bB More

Brightness* Darker bB Brighter

Colour* Less bB More

Hue** Reddish bB Greenish

Sharpness* Softer bB Sharper

*Only available if ’Personal’ is selected in ‘Picture Mode’

**Only available for NTSC colour signal (eg. US video tapes)

Reset Resets picture to the factory preset levels

AI V Off: Normal.

(Artificial Intelligence) v On: Automatic optimization of contrast level

according to the TV signal.

Noise Reduction V High: High noise reduction.

Mid: Medium noise reduction.

Low: Low noise reduction.

Auto: Optimum noise reduction automatically selected.

v Off: No noise reduction.

Digital Mode V Normal: Basic 100Hz picture quality.

DRC 50: Improved picture resolution for viewing

scrolling characters.

v DRC 100: Optimum picture resolution creating

flicker-free pictures.

Colour Tone V Warm: Gives a warm tint to the picture.

Normal: Normal.

v Cool: Gives a cool tint to the picture.

Colour Tone

Normal

Cool

Warm

14

Using the TV menu system:

Equaliser Adjustment

Sel: Adjust: Confirm:OK

(Personal)

+

0

–

120 500 1,5K 5 K 10 K

Auto Vol. Control

Off

On

Dual Sound

Mono

Stereo

NICAM

Volume

Dual Sound

PA P

Stereo

NICAM

Audio Adjustment

Equaliser Mode

Equaliser

Adjustment

Balance

Loudness

Space

Auto Vol. Control

Dual Sound

Volume

Dual Sound

Stereo

Off

Stereo

Select Mode :

Off

Confirm: OK

Personal

Vocal

Jazz

Rock

0

NICAM

Balance

0

Loudness

Off

On

Space

Off

On

Sound Control

Item Effect/Operation

Equaliser Mode V Personal

Vocal

Jazz

Rock

Pop

v Flat (fixed setting, cannot be adjusted)

Equaliser adjustment You can adjust the mode selected in Equaliser mode by

cutting and boosting the 5 selected frequency bands.

Press b or B to select the frequency band then V or v to

adjust the frequency. Finally, press the OK button to store

the new adjustment.

If you want to store the new setting, you need to set the Equaliser mode to

‘Personal’. Personal mode permanently stores the setting, all other modes

(Vocal, Jazz, Rock, Pop) store only until the next mode change.

Balance b More left

B More right

Loudness V Off: Normal

v On: For music broadcasts

Space V Off: Normal

v On: Spatial acoustic effect

Auto Vol. Control V Off: Volume level changes according to the broadcast

signal.

v On: Volume level of the channels will stay the same

independent of the broadcast signal (eg in the case of

advertisements).

Dual Sound For a bilingual broadcast:

V A for channel 1

v B for channel 2

For a stereo broadcast:

V Mono

v Stereo

When NICAM stereo is being broadcast, the indication NICAM appears briefly

on the screen.

Headphones

i Volume Adjusts headphone volume.

Can also adjust the volume level of additional equipment

connected to the RCA sockets on the rear of the TV.

i Dual Sound Only available when PAP feature is selected:

V Stereo: The sound of one screen comes through both

the TV loudspeakers and the headphones.

v PAP: The sound of the left screen comes through

the TV loudspeakers, the sound of the right

screen is selectable via headphones.

For more detail on PAP, refer to the ‘Operating PAP’ section of this manual.

15

Using the TV menu system:

Using the Features menu

1. Press the MENU button on the remote control to display the menu on the TV screen.

2. Press the v or V buttons to select for the ‘Features’ menu then press B to enter the ‘Features’

menu.

3. Press the v or V buttons to select the desired menu item then press B to confirm. For a description

of the menu items and their effects, see the table below.

4. Press the v, V, B or b buttons to select the desired setting.

5. Press the OK button to confirm your choice of setting.

6. Repeat steps 3-5 if you wish to select any of the other items.

7. Press the MENU button to remove the menu from the TV screen.

Item Effect/Operation

Sleep Timer You can select a time after which the TV switches itself into

standby mode.

V Off

v 90 min

Parental Lock V Off: No parental lock.

v On: This feature disables the TV buttons when the set is in standby mode.

It is only possible to switch the set back on by pressing a button on

the remote control.

AV2 Output V TV audio/video signal from the aerial

AV1 audio/video signal from scart 1

AV2 audio/video signal from scart 2

AV3 audio/video signal from scart 3

v AV4 audio/video signal from connectors on front of the TV

Features

Select: Enter:

Sleep Timer

Parental Lock

AV 2 Output

Off

TV

10 min

Sleep Timer

Changing the screen size

This feature allows you to change the size of the TV picture.

Press the button on the remote control repeatedly or use the v or V buttons to select one of the

following formats then press the OK button to confirm your selection:

4:3 conventional 4:3 picture size, full picture information.

16:9 for 16:9 broadcasts.

4:3

16:9

Parental Look

Off

On

AV 2 Output

TV

AV 1

AV 2

AV 3

AV 4

16

Using the TV menu system:

Re-arranging the TV channels

After tuning the TV, you can use this feature to change the order of the channels on the TV.

1. Press the MENU button on the remote control to display the menu on the TV screen.

2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set Up’

menu.

3. Press the V button to select ‘Programme Sorting’ then press B to enter the ‘Programme Sorting’

menu.

4. Press the v or V buttons to select the channel you want to move then press B to confirm.

5. Press the v or V buttons to select the new programme position (eg PROG 4) for your selected

channel then press the OK button to confirm. The selected channel now moves to its new

programme position and the other channels move accordingly.

6. Repeat steps 4 and 5 if you wish to sort the other channels.

7. Press the MENU button to remove the menu from the TV screen.

Programme Sorting

Select Prog: Confirm:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select: Enter :

PROG CH LABEL

Programme Sorting

Select Position: Move: OK

C03 TV 5

PROG CH LABEL

1

2

3

4

5

6

7

8

9

10

11

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

1

2

3

4

5

6

7

8

9

10

11

- - - - -

Manually tuning the TV

You have already tuned the TV automatically using the instructions at the start of this manual. You can however carry

out this operation manually, adding channels to the TV, one at a time.

1. Press the MENU button on the remote control to display the menu on the TV screen.

2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set Up’

menu.

3. Press the V button to select ‘Manual Set Up’ on the menu screen then press B to enter the ‘Manual

Set Up’ menu.

4. Press the V button to select ‘Manual Programme Preset’ on the menu screen then press B to enter

the ‘Manual Programme Preset’ menu.

5. Press the v or V buttons to select a programme number for your channel (eg PROGR 1 for BBC1)

then press B to highlight the ‘SKIP’ column.

6. Press v to select ‘OFF’ then press B to highlight the ‘SYS’ column.

7. Press the v or V buttons to select the TV broadcast system or ‘EXT’ for a video input source

(AV1, AV2, ...) then press B to confirm.

8. Press the v or V buttons to select ‘C’ for terrestrial channels, ‘S’ for cable channels, or ‘F’ for

direct frequency inputs then press B to confirm.

9. Select the first number digit of ‘CH’ (channel) then the second number digit of ‘CH’ with the

number buttons on the remote control or Press the V button to search for the next available

channel.

10. If you do not wish to store this channel on the programme number you selected, press the v or V

buttons to continue searching for the desired channel.

11. If this is the channel you wish to store, press the OK button.

12. Repeat steps 5-11 if you wish to store more channels then press the MENU button to remove the

menu from the TV screen.

PROG SYS

Off

SKIP LABEL

1 I

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Picture Rotation

Personal ID

Demo

O

- - - - - - -

Set Up

Auto Tuning

Programme Sorting

Select Next View

AV Preset

Manual Set Up

Select: Enter:

Manual Programme Preset

Select: Enter:

PROG CHSYSSKIP LABEL

Off

1

2

3

4

5

6

7

8

9

10

11

PROG CHSYS

Off

SKIP LABEL

1

B/G

L

I

D/K

EXT

CH

C

S

F

PROG SYS

Off

SKIP LABEL

1 I

CH

03

SEARCH

PROG CHSYS

Off

SKIP LABEL

0 EXT

AV1

AV2

AV3

AV1

ARD

BBC

C03

C05

C07

C08

C09

C11

C12

C13

C14

B/G

C09

C10

B/G

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

B/G

- - - - -

Stránka sa načítava ...

Sony KV-34FQ75K Návod na obsluhu

Sony KV-34FQ75K Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty