Sony KP-61PS1K Návod na obsluhu

R

4-075-410-31(1)

FD Trinitron

Colour Television

Instruction Manual

KP-61PS1K

KP-53PS1K

KP-48PS1K

GB

Návod k obsluze

CZ

Instrukcja obsługi

PL

Kezelési útmutató

HU

Сборник инструкций

RU

Инструкции за експлоатация

BG

3

GB

Introduction

Thank you for choosing this Sony 100Hz Projection TV.

Before operating the projection TV, please read this manual thoroughly and retain it for future reference.

• Symbols used in the manual:

• Informs you of possible hazards.

• Important information.

• Information on a feature.

• 1,2... Sequence of instructions.

• Shaded buttons on the remote control show the

buttons you have to press to follow the sequence

of instructions.

• Informs you of the result of the instructions.

Safety Information

All TV’s operate on extremely high voltages. To prevent fire or electric shock, please follow the safety guidelines indicated in the

blue sheet supplied.

•After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,

pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors

or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.

•To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed

down from the ceiling.

•Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a

programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.

•Clean the projection TV screen and cabinet with a soft dampened cloth. Do not use any abrasive cleaners. As a safety precaution,

unplug the set before cleaning it.

•Avoid touching the screen, and take care not to scratch the surface with hard objects.

Table of Contents

Introduction ...................................................................................................................................................................................................................... 3

Safety Information............................................................................................................................................................................................................ 3

Overview

Checking the Accessories Supplied.................................................................................................................................................................. 4

Overview of TV Buttons .................................................................................................................................................................................... 4

Overview of Remote Control Buttons.............................................................................................................................................................. 5

Installation

Inserting Batteries into the Remote Control.................................................................................................................................................... 6

Connecting the Aerial and VCR ....................................................................................................................................................................... 6

First Time Operation

Switching on the projection TV and Automatically Tuning......................................................................................................................... 7

Adjusting colour Registration (Convergence)................................................................................................................................................ 9

Menu System

Introducing the Menu System........................................................................................................................................................................... 9

On Screen display Menus Guide.................................................................................................................................................................... 10

Using the Menu System:

Adjusting the Picture..................................................................................................................................................................................... 11

Adjusting the Sound...................................................................................................................................................................................... 12

Using the Features menu............................................................................................................................................................................... 14

Manually Tuning the TV............................................................................................................................................................................... 15

Labelling a channel ........................................................................................................................................................................................ 16

Skipping programme positions.................................................................................................................................................................... 17

Using the “Further Programme Preset” function...................................................................................................................................... 18

Inputting your personal ID........................................................................................................................................................................... 19

Using the Demo Mode................................................................................................................................................................................... 20

Adjusting the picture geometry for an RGB source.................................................................................................................................. 21

Labelling of Input Sources ............................................................................................................................................................................ 22

Using Multi PIP (Picture In Picture)............................................................................................................................................................ 23

Using PAP (Picture And Picture)................................................................................................................................................................. 23

Teletext...................................................................................................................................................................................................................... 24

NexTView................................................................................................................................................................................................................. 26

Optional Connections

Connecting Optional Equipment.................................................................................................................................................................... 28

Using Optional Equipment.............................................................................................................................................................................. 29

Smartlink............................................................................................................................................................................................................ 30

Remote Control of other Sony Equipment.................................................................................................................................................... 30

Additional Information

Optimum Viewing Area .................................................................................................................................................................................. 31

Specifications..................................................................................................................................................................................................... 32

Troubleshooting................................................................................................................................................................................................ 33

MENU

K

4

One Remote Control

(RM-892)

Overview of Projection TV Buttons

(conectores lado izquierdo) (conectores lado derecho)

Checking the Accessories Supplied

Overview

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Two batteries (R6 type)

On/Off Switch

Standby

indicator

Volume control

buttons

Selecting

input source

S Video

Input jack

Video Input

jack

Audio Input

jacks

Auto

Convergence

button

Headphone

jack

(left side connectors)

(right side connectors)

Press on the mark , on

the front of the projection

TV to reveal the front

connectors.

Programme up

or down buttons

(selects TV channels)

Overview

s

5

GB

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

VIDEO TV

VTR 1 2 3 4 DVD

CH

Overview

Overview of Remote Control Buttons

Resetting to factory set levels

Press not only to return picture and sound

settings to factory-set levels, but also to re-

install the projection TV as the first time it

was switched on.

After the "Language/Country" menu

appeared on the screen, proceed in the same

way as described in the section "Switching on

the Projection TV and automatically Tuning"

of this instruction manual.

VCR on/off

Press to switch your VCR on or off.

Muting the Sound

Press to mute TV sound.

Press again to restore the sound.

Selecting TV mode

Press to switch off Teletext or video input.

PAP (Picture And Picture)

For more details, please refer to the section

"Using PAP (Picture And Picture)".

Selecting Teletext

Press to switch on Teletext.

Displaying EPG

Press to display the Electronic Programme

Guide (EPG). Press again to switch off EPG.

Freezing the picture

Press to freeze the picture. Press again to

return to the normal picture.

Selecting channels

Press to select channels.

For double-digit programme numbers, e.g.

23, press -/-- first, then the buttons 2 and 3.

If you enter an incorrect first digit, this

should be corrected by entering another digit

(0-9) and then selecting -/-- button again to

enter the programme number of your choice.

Selecting Sound mode

Press repeatedly to change the sound mode.

Selecting Picture mode

Press repeatedly to change the picture mode.

Adjusting TV Volume

Press to adjust the volume of the TV.

Displaying the time

Press to switch the time on or off

(available only when teletext is

broadcast).

VCR operation

For more details, please refer to the

section "Remote Control of other

Sony Equipment".

To Temporarily Switch Off projection TV

Press to temporarily switch off TV (the standby

indicator

on projection TV lights up). Press

again to switch on TV from standby mode.

To save energy we recommend switching off completely

when TV is not in use.

After 15-30 minutes without a signal and

without any button being pressed, the

projection TV switches automatically into

standby mode.

Displaying On Screen Information

Press to display all on-screen indications.

Press again to cancel.

Selecting Input source

Press repeatedly until the desired input symbol of

the source appears on the screen.

Back to the channel last watched

Press to watch the last channel selected (watched for

at least 5 seconds).

Selecting Screen format

Press repeteadly to change the format of the screen

4:3 for a conventional 4:3 picture or 16:9 for a

imitation of wide screen effect. 16:9 picture is

available only if you have selected Digital Mode DRC

100 (PAL mode) in the Picture Adjustment menu.

Displaying Multi PIP (Picture In Picture)

Press to display Multi PIP mode. Press again to

cancel.

Joystick for menu selection

• When MENU is switched on:

4 Scroll Up

$ Scroll Down

Z Previous menu or selection

z Next menu or selection

OK Confirms your selection

• When MENU is switched off:

Z Return to the last menu screen.

OK Shows a channel overview

Selecting channels

Press to select the next or previous channel.

Displaying the menu system

Press to display the menu on the screen. Press again

to remove the menu display from the screen.

Besides TV functions, all coloured buttons as well as green

symbols are also used for Teletext operation. For more details,

please refer to the "Teletext" section of this instruction manual.

Overview

6

Installation

Make sure you insert the batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Inserting Batteries into the Remote Control

Connecting cables are not supplied.

Connecting the Aerial and VCR

or

OUT IN

VCR

The Scart lead is optional.

If you use this optional connection

it can improve picture and sound quality

when using a VCR.

If you do not use a SCART lead, after

automatically tuning the projection TV

refer to the "Manually Tuning the TV"

section of this instruction manual, to tune

in the projection TV to the output of your

VCR. Also refer to your VCR instruction

manual to find out how to find the output

channel of your VCR.

Installation

7

GB

First Time Operation

The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to 1) choose the language

of the menu screen, 2) choose the country in which you wish to operate the projection TV, 3) search and stores all available

channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen.

However, if you need to change the language menu, change the country, change or repeat the tuning (e.g. when you move

house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in

the (Set Up)

.

Switching on the Projection TV and Automatically Tuning

1 Connect the Projection TV plug to the mains socket (220-240V AC,

50 Hz). Press the on/off button on your projection TV set to

switch on. The first time you press this button the Language/

Country menu displays automatically on the screen.

2 Push the joystick on the remote control to $ or 4 to select the

language, then press OK to confirm your selection. From now on all

the menus will appear in the selected language.

3 Push the joystick to $ or 4 to select the country in which you will

operate the projection TV set, then press OK to confirm your

selection.

Select "Off" instead of a country if you do not want your

channels (TV Broadcasts) stored in a given channel sequence

starting from programme position 1.

4 The Auto Tuning menu appears on the screen in the selected

language, then press the OK button on the remote control to select

YES.

5 A new menu appears automatically on the screen asking you to

check that the aerial is connected. Confirm that the aerial is connected

and then press the OK button to start the automatic tuning.

The TV starts to automatically search and store all available

channels (TV Broadcast) for you.

This procedure could take some minutes. Please, be patient and

do not press any button. Otherwise the automatic tuning will

not be completed.

continued...

First Time Operation

Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français

Español

English

Deutsch

Dansk

Čeština

Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français

Español

English

Deutsch

Dansk

Čeština

Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français

Español

English

Deutsch

Dansk

Čeština

Language/Country

Language

Country

Select Country:

Confirm: OK

4

Finland

Denmark

Czech Rep.

Bulgaria

Belgium

Austria

Off

Do you want to start

automatic tuning?

Yes: OK No:

Please confirm that

aerial is connected!

Yes: OK No:

1

2

3

4

5

CO2

CO3

CO4

CO7

CO8

Searching...

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

8

First Time Operation

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Programme Sorting

Select Prog: Confirm:

PROG CH LABEL

1

2

3

4

5

6

7

8

9

10

11

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

Programme Sorting

Select Position: Move: OK

C03 TV 5

PROG CH LABEL

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

1

2

3

4

5

6

7

8

9

10

11

6 After all available channels are captured and stored, the

Programme Sorting menu appears automatically on the screen

enabling you to change the order in which the channels appear

on the screen.

a) If you do not wish to change the channel order, go to step 7.

b) If you wish to change the channel order:

1Push the joystick on the remote control to $ or 4 to select the

programme number with the channel (TV Broadcast) you wish to

rearrange, then push to z.

2 Push the joystick to $ or 4 to select the new programme number

position for your selected channel (TV Broadcast), then press OK.

The selected channel now moves to its new programme

position and the other channels move accordingly.

3Repeat steps b1) and b2) if you wish to change the order of the

other channels.

7 Press the MENU button to exit and return to the normal TV screen.

Your projection TV is now ready for use.

First Time Operation

9

GB

Auto converge the Red, Green, and

Blue Lines

1 Press on the mark , on the front of the projection TV to reveal the

front connectors.

2 Press button placed on the right side of front connectors.

The Auto Convergence function works for about 10 seconds. When the white

cross disappears from the screen, your projection TV is ready for use.

Notes:

The Auto Convergence function does not work when:

• no signal is input.

• the input signal is weak.

• the screen is exposed to spotlights or direct sunlight.

• you watch the teletext broadcast.

• you watch NexTView.

First Time Operation - Menu System

Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the images.

In that case, proceed as follows.

Adjusting Colour Registration (Convergence)

1 Press the MENU button to switch the first level menu on.

2 •To higlight the desired menu or option, push the joystick to

4 or $.

•To enter to the selected menu or option, push to z

•To return to the last menu or option, push to Z.

•To alter settings of your selected option, push to $/4/Z or z.

•To confirm and store your selection, press OK.

3 Press the MENU button to remove the menu from the screen.

Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote

Control to operate the menu system:

Introducing the Menu system

OK

push to $/4/Z or z

press OK

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

First Time Operation - Menu System

Joystick:

10

Picture Adjustment

Select: Enter:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Audio Adjustment

Equaliser Mode

Equaliser

Adjustment

Balance

Loudness

Space

Auto Vol. Control

Dual Sound

Volume

Dual Sound

Personal

Mono

Off

Mono

Select: Enter:

0

.

0

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Do you want to start

automatic tuning?

Yes: OK No:

Programme Sorting

Select Prog: Confirm:

PROG CH LABEL

1

2

3

4

5

6

7

8

9

10

11

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Teletext

Top / Bottom / Full

Text Clear

Reveal

Time Page

Page Overview

Select: Enter:

Menu System

On Screen display Menus Guide

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Audio Adjustment

Equaliser Mode

Equaliser

Adjustment

Balance

Loudness

Space

Auto Vol. Control

Dual Sound

Volume

Dual Sound

Mono

Off

Mono

Select: Enter Menu:

0

.

0

Personal

Features

Sleep Timer

Parental Lock

AV2 Output

Off

TV

Select: Enter Menu:

Speaker

Main

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

- - - - - - -

Features

Sleep Timer

Parental Lock

AV2 Output

Off

TV

Select: Enter:

Speaker

Main

Refer to the section

"Adjusting the Picture”

Refer to the section

"Adjusting the Sound”

Refer to the section

"Using the features

menu”

Refer to the section

"Switching on the

projection TV and

Automatically Tuning"

Refer to the section

"Switching on the

projection TV and

Automatically Tuning"

Refer to the

section

“NexTView”

Refer to the

section

"Labelling of

Input Sources”

Refer to the

section "Teletext"

Menu System

Refer to the section

"Switching on the

projection TV and

Automatically Tuning"

Refer to the sections

"Manually Tuning the

TV", "Labelling a

channel" and "Skipping

programme positions"

Refer to the section

"Using the Further

Programme Preset

function"

Refer to the section

"Adjusting the picture

geometry for an RGB

source"

Refer to the section

"Inputting your

personal ID"

Refer to the section

"Using the Demo

Mode"

11

GB

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to z to enter the Picture Adjustment menu.

3 Push the joystick to $ or 4 to select the item you wish to change,

then push to z.

Refer to the table below to chose the item and for the effect of

each control:

Picture Mode $ Live (for live broadcast programmes)

Personal (for individual settings)

Movie (for films)

4 Game (for computer games)

Contrast Z Less z More

Brightness

* Z Darker z Brighter

Colour* Z Less z More

Sharpness* Z Softer z Sharper

Hue** Z Reddish z Greenish

Reset Resets picture to the factory preset levels.

AI (Artificial 4 Off: Normal

Intelligence) $ On: Automatic optimization of contrast level

according to the TV signal

Noise 4 Off: Normal

Detection $ On: Reduces picture noise in the case of a

weak/noisy broadcast signal.

Digital Mode 4 DRC 50: improves picture resolution and is optimal

for viewing scrolling characters.

$ DRC 100: improves picture resolution creating

flicker-free pictures.

* Can only be altered if Personal Picture Mode is selected.

** Only avalaible for NTSC colour signal (e.g: USA video tapes).

4 Push the joystick to 4, $, Z or z to alter the selected item, then

press the OK button to store the new adjustment.

5 Repeat steps 3 and 4 to alter the other items.

6 Press the MENU button to exit and return to the normal TV screen.

Changing the Picture Mode Quickly

You can quickly change the Picture Mode without entering the

Picture Control menu screen.

1 Press the button on the remote control repeatedly to directly

access and select your desired picture mode (Live, Personal, Movie,

or Game).

2 Press the OK button to remove the display from the screen.

Menu System

Although the picture is adjusted at the factory, you can modify it to suit your own taste.

Adjusting the Picture

Digital Mode

DRC 50

DRC 100

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Picture Adjustment

Select: Enter:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Picture Mode

Live

Personal

Movie

Game

Contrast

AI

On

Off

Noise Detection

On

Off

Picture Mode

Live

Personal

Movie

Game

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

K

Menu System

12

Menu System

Although the sound is adjusted at the factory, you can modify it to suit your own taste.

Adjusting the Sound

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter to the Audio Adjustment menu.

3 Push the joystick to $ or 4 to select the item you wish to change,

then push to z.

Refer to the table below to chose the item and for the effect of

each control:

Equaliser Mode $ Personal (for individual settings)

Vocal

Jazz

Rock

Pop

4 Flat (fixed setting, cannot be adjusted)

*Equaliser Push to

z or Z to select the frequency band you

Adjustment want to alter and push to $ or 4 to adjust. Finally,

press the OK button to store the new adjustment.

Balance Z Left z Right

Loudness $ Off: normal

4 On: for music broadcasts

Space $ Off: normal

4 On: acoustic sound effect

Auto Vol. $ Off: volume level changes according to the

Control broadcast signal

4 On: volume level of the channels will stay the same

independent of the broadcast signal (e.g. in

case of advertisement)

Dual Sound • For a stereo broadcast:

$ Mono

4 Stereo

• For a bilingual broadcast:

$ Mono (for mono channel if available)

A (for channel 1)

4 B (for channel 2)

Headphones:

l

Volume Z Less z More

l

Dual Sound • For a stereo broadcast:

$ Mono

4 Stereo

• For a bilingual broadcast:

$ Mono (for mono channel if available)

A (for channel 1)

B (for channel 2)

4 PAP (only when PAP is switched on)

* Can only be permanently stored if Personal Equaliser Mode is selected,

the other modes (Vocal, Jazz, Rock or Pop) store until the next mode

change.

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Audio Adjustment

Equaliser Mode

Equaliser

Adjustment

Balance

Loudness

Space

Auto Vol. Control

Dual Sound

Volume

Dual Sound

Personal

Mono

Off

Mono

Select: Enter:

0

.

0

Audio Adjustment

Equaliser Mode

Equaliser

Adjustment

Balance

Loudness

Space

Auto Vol. Control

Dual Sound

Volume

Dual Sound

Personal

Mono

Off

Mono

Personal

Vocal

Jazz

Rock

Pop

Flat

Select Mode: Confirm: OK

0

.

0

Equaliser Adjustment

Sel: Adjust: Confirm:OK

(Personal)

+

0

–

120 500 1,5K 5 K 10 K

Balance

.

Loudness

Off

On

Space

Off

On

Auto Vol. Control

Off

On

Dual Sound

Mono

A

B

Volume

Dual Sound

B

A

continued...

13

GB

Menu System

4 Push the joystick to $, 4, Z or z to alter the selected item, then

press the OK button to store the new adjustment.

5 Repeat steps 3 and 4 to alter the other items.

6 Press the MENU button to exit and return to the normal TV screen.

Changing Sound Mode Quickly

You can quickly change Sound mode without entering the Sound

Control menu screen.

1 Press the button on the remote control repeatedly to directly

access and select your desired sound mode (Personal, Vocal, Jazz,

Rock, Pop or Flat).

2 Press the OK button to remove the display from the screen.

Menu System

Equaliser Mode

Personal

Vocal

Jazz

Rock

Pop

Flat

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

14

Menu System

Using the Features menu you can:

a) Select if you want to listen to the sound from the projection TV directly or through an external amplifier.

b) Select a time period after which the projection TV switches itself into standby mode.

c) Lock the buttons on the projection TV set. In this way, the projection TV only works by using the remote control buttons.

d) Select the source to be output from the Scart connector :2/q2 (SMARTLINK). In this way you can record from this scart

connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.

Using the Features Menu

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter to the Features menu.

3 Push the joystick to $ or 4 to select the desired menu item, then

push to z (see the table below for the effect of each menu item).

4 Push to $ or 4 to select the desired setting and press the OK button

to store.

5 Press the MENU button to exit and return to the normal TV screen.

Features Effect / Operation

Speaker $ Main (sound from projection TV set)

4 Centre In (sound from external amplifier)

Sleep Timer

4 Off

10 min.

20 min.

...

$ 90 min.

• One minute before the projection TV switches

into standby mode, the time remaining is

displayed on the screen automatically.

• When watching the TV, press the button on

the remote control to display the time remaining.

• To return to normal operation from standby

mode, press the TV button on the remote

control.

Parental lock $ Off (Normal mode)

4 On (The projection TV can only be switched on

using the remote control, the buttons on the

TV do not work)

AV2 Output $ TV (audio/video signal from the aerial)

AV1

(audio/video signal from the Scart

connector :1/ ).

AV2 (audio/video signal from the Scart

connector

:

2/q2 (SMARTLINK).

AV3 (audio/video signal from the Scart

connector

:

3/q3).

4 AV4 (audio/video signal from the connector … 4

placed in the front of the Projection TV).

If you have connected a decoder, please remember

to change back the AV2 Output to "TV" for correct

unscrambling.

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Features

Sleep Timer

Parental Lock

AV2 Output

Off

TV

Select: Enter:

Speaker

Main

Speaker

Main

Centre In

10 min

Sleep Timer

Parental Lock

Off

On

AV2 Output

TV

AV1

AV2

AV3

AV4

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

15

GB

1 Press the MENU button on the remote control to display the

menu on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter the Set Up menu.

3 Push the joystick to $ or 4 to select Manual Set Up, then push

to z.

4 Push the joystick to $ or 4 to select Manual Programme Preset,

then push to z.

5 Push the joystick to $ or 4 to select on which programme number

you want to preset a channel (for VCR select programme number

"0"), then push twice to z. The column SYS is highlighted.

6 Push the joystick to $ or 4 to select the system for TV Broadcast

and VCR channel (B/G for western european countries, L for

France, I for Great Britain or D/K for eastern european countries)

or a external input source (EXT), then push to z. The column CH

is highlighted.

7 Push the joystick to $ or 4 to select the channel tuning, "C" for

terrestrial channels (for TV Broadcast or VCR channel), "S" for

cable channels or F for, direct frequency input then push to z.

8 a) If you know the channel number of the TV Broadcast, the VCR

test signal channel or the frequency, press the number buttons

to enter directly the channel number. Then press the OK button

to store.

b) If you do not know the channel number, push the joystyck to $

to select SEARCH and the projection TV starts automatically

to search for the next available TV Broadcast channel or the

channel of the VCR signal. Then press the OK button to store

or press $ to continue searching the desired channel.

c) For external input sources (EXT), push to $ to select the input

source where you have connected your equipment (AV1, AV2,

AV3 or AV4). Then press the OK button to store.

9 Repeat steps 4 to 8 a), b) or c) if you wish to store more channels.

10 Press the MENU button to exit and return to the normal TV screen.

Your projection TV is now ready for use.

Menu System

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Programme Preset

Select: Enter:

PROG CHSYSSKIP LABEL

C09

C10

ARD

BBC

B/G

Off

1

2

3

4

5

6

7

8

9

10

11

PROG CHSYS

Off

SKIP LABEL

1

B/G

L

I

D/K

EXT

PROG SYS

Off

SKIP LABEL

1 B/G

CH

C

S

F

- -

PROG SYS

Off

SKIP LABEL

1 B/G

CH

03

SEARCH

C

PROG CHSYS

Off

SKIP LABEL

3 EXT

AV1

AV2

AV3

AV4

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Menu System

Use this function to preset channels (TV Broadcast) or a video input source one by one to the programme order of your choice.

Manually Tuning the TV

16

Menu System

Names for channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however name a channel or

an input video source using up to five characters (letters or numbers). Using this function, you can easily identify which channel

(TV Broadcasts) or video source you are watching.

Labelling a channel

1Press the MENU button on the remote control to display the

menu on the screen.

2Push the joystick to $ to select the symbol, then push to z to

enter the Set Up menu.

3Push the joystick to $ or 4 to select Manual Set Up, then push

to z.

4Push the joystick to $ or 4 to select Manual Programme Preset,

then push to z.

5Push the joystick to $ or 4 to select the programme number with

the channel you wish to name.

6Push the joystick to z repeatedly until the first element of the

LABEL column is highlighted.

7Push the joystick to $ or 4 to select a letter, number, "+" or a

blank, then push to z to confirm this character. Select the other

four characters in the same way.

8After selecting all the characters, press the OK button.

9Repeat steps 5 to 8 if you wish to label other channels.

10Press the MENU button to exit and return to the normal TV

screen.

When you select a named channel, the name appears for a few seconds

on the screen.

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Programme Preset

Select: Enter:

PROG CHSYSSKIP LABEL

C09

C10

ARD

BBC

B/G

Off

1

2

3

4

5

6

7

8

9

10

11

PROG SYS

Off

SKIP LABEL

1 B/G

CH

C 03

A

17

GB

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter the Set Up menu.

3 Push the joystick to $ or 4 to select Manual Set Up, then push

to z.

4 Push the joystick to $ or 4 to select Manual Programme Preset,

then push to z.

5 Push the joystick to $ or 4 to select the programme position you

want to skip, then push to z to enter the SKIP column.

6 Push the joystick to $ to select On, then press the OK button to

store.

7 Repeat steps 5 and 6 to skip other unused programme positions.

8 Press the MENU button to exit and return to the normal TV screen.

When changing channels (TV Broadcasts) with the PROGR +/- buttons,

the skipped programme positions do not appear. You can, however, still

select them using the number buttons.

Menu System

You can programme this projection TV to skip any unwanted programme numbers when they are selected with the PROGR +/-

buttons. To cancel this function afterwards, proceed in the same way as described below by selecting Off instead of On in step 6.

Skipping Programme positions

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

PROG SYSSKIP LABEL

1 B/G

CH

C 09

ARD

Off

On

Manual Programme Preset

Select: Enter:

PROG CHSYSSKIP LABEL

C09

C10

ARD

BBC

B/G

Off

1

2

3

4

5

6

7

8

9

10

11

18

Menu System

With this feature you can:

a) Individually attenuate the strength of a channel signal in case of a strong local aerial signal (striped picture).

b) Individually adjust the volume level of each channel.

c) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a better picture

reception if the picture is distorted.

d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a

connected VCR records the unscrambled signal.

Using the "Further Programme Preset" function

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter the Set Up menu.

3 Push the joystick to $ or 4 to select Manual Set Up then push to z

to enter.

4 Push the joystick to $ or 4 to select Further Programme Preset,

then push to z.

5 Push the joystick to $ or 4 to select the relevant programme

number, then push to z repeatedly to select:

a) ATT (RF attenuator)

b) VOL (Volume Offset)

c) AFT (Automatic Fine Tuning) or

d) DECODER

The selected item changes colour.

6 a) ATT

Push the joystick to $ to select On, then press the OK button.

Repeat steps 5 and 6 a) to attenuate other channels.

b) VOL

Push the joystick to $ or 4 to adjust the volume level of the channel

over a range of -7 to +7, then press the OK button. Repeat steps 5

and 6b) to adjust the volume level of the other channels.

c) AFT

Push the joystick to $ or 4 to fine tune the channel frequency over

a range of -15 to +15, then press the OK button. Repeat steps 5 and

6c) if you wish to fine tune other channels.

d) DECODER

Push the joystick to $ or 4 to select AV1 (for a decoder connected

to the Scart :1/ ) or AV2 (for a decoder connected to the Scart

:2/q 2 (SMARTLINK)), then press the OK button.

Repeat steps 5 and 6d) to select the AV1 or AV2 output for other

programme positions.

The picture from the decoder connected to the Scart connector

:1/ or :2/q 2 (SMARTLINK) on the back of the

projection TV will appear on this programme number.

7 Press the MENU button to exit and return to the normal TV screen.

Your projection TV is now ready for use.

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Further Programme Preset

Select: Enter:

PROG AFTVOLATT DECODER

On

Off

0

Off

1

2

3

4

5

6

7

8

9

10

11

PROG AFTVOLATT DECODER

1

Off

On

PROG AFTVOLATT DECODER

1 On -5

2

PROG AFTVOLATT DECODER

1 On -5 2

Off

AV1

AV2

PROG AFTVOLATT DECODER

1On

- 5

19

GB

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter the Set Up menu.

3 Push the joystick to $ or 4 to select Manual Set Up, then push to z.

4 Push to $ or 4 to select Personal ID, then push to z.

5 Push the joystick to $ or 4 to select a letter, number, + or a blank;

then push to z to confirm this character. Select the other ten

characters in the same way.

6 After selecting all the characters, press the OK button. A new menu

appears automatically on the screen asking you to be sure that you

want to save this ID.

7 a) If you do not wish to store this ID, push the joystick to Z and

repeat steps 4 to 6 to enter a new ID.

b) If you wish to store this ID, press the OK button.

Remember that this code can only be input once.

8 Press the MENU button to return to the normal TV screen.

When you enter the Manual Set Up menu, in the "Personal ID" option the

code you entered above will be displayed. You will not be able to select and

change this option.

Menu System

You can programme this projection TV with a personal code, using up to eleven characters (letters and numbers). Then using this

fuction it will be possible to identify your projection TV if it was ever stolen.

This code can only be input once!

Make sure to write it down in this instruction manual.

Inputting Your Personal ID

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Manual Set Up

Select A-Z, 0-9: Store: OK

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

A----------

Are you sure?

Save: OK Cancel:

20

Menu System

This function provides an overview of some of the features available on your projection TV.

Using the Demo Mode

Menu System

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter the Set Up menu.

3 Push the joystick to $ or 4 to select Manual Set Up, then push to z.

4 Push to $ or 4 to select Demo, then push to z to enter and start

the demonstration.

The projection TV starts the demonstration and shows most of the

available picture functions.

Note:

Press the button on the remote control to stop the Demo mode

and return to the normal TV screen.

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

21

GB

1 Press the … button repeatedly on the remote control until the

symbol …1 appears on the screen.

2 Push the MENU button to display the menu on the screen.

3 Push the joystick to $ to select the symbol, then push to z to

enter the Set Up menu.

4 Push to $ or 4 to select Manual Set Up then push to z to enter.

5 Push the joystick to $ or 4 to select RGB Set Up then push to z.

6 Push the joystick to z to enter H Centre, then push to $ or 4 to

adjust the centre of the picture over a range of -10 to +10. Press

the OK button to store.

7 Press the MENU button to exit and return to the normal TV screen.

Menu System

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Menu System

When connecting an RGB source, such as a DVD player, to the Scart connector :1/ you may need to readjust the geometry

of the picture.

Adjusting the picture geometry for an RGB source

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

AI

Noise Detection

Digital Mode

Personal

On

DRC 50

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

RGB Set Up

Adjust Position: Confirm: OK

H Centre

O

… 1

Stránka sa načítava ...

Sony KP-61PS1K Návod na obsluhu

Táto príručka je tiež vhodná pre

Sony KP-61PS1K Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty