Philco PW 96 Návod na obsluhu

Wine cooler

USER'S MANUAL

PW 96

PW 166

PW 166D

Dear customer,

Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read

all the instructions in this user's manual.

EN - 1

08/2013

CONTENTS

PART 1: BEFORE PUTTING INTO OPERATION ................................................................................................. 2

• Safety precautions ..........................................................................................................................................................................2

• Safety instructions for gas R600a ..............................................................................................................................................4

PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 5

• PW 166 (Single Zone Wine Cooler) ...........................................................................................................................................5

• PW 166 D (Dual Zone Wine Cooler) ..........................................................................................................................................6

• PW 96 (Single Zone Wine Cooler) .............................................................................................................................................7

PART 3: INSTALLATION .................................................................................................................................... 8

• Transport and unpacking ............................................................................................................................................................8

• Operating conditions ....................................................................................................................................................................8

• Installation location .......................................................................................................................................................................9

• Built-in installation ...................................................................................................................................................................... 10

• Cleaning before use .................................................................................................................................................................... 11

• Electrical connection ..................................................................................................................................................................11

• Changing the door opening direction .................................................................................................................................11

PART 4: CONTROLS ........................................................................................................................................ 14

• Turning on / o ............................................................................................................................................................................. 14

• Locking / unlocking the control panel .................................................................................................................................14

• Turning the internal lighting on / o ....................................................................................................................................14

• Setting the temperature ........................................................................................................................................................... 15

• Storing wine ..................................................................................................................................................................................16

PART 5: REGULAR MAINTENANCE ................................................................................................................ 17

• Cleaning the appliance ..............................................................................................................................................................17

• Moving the appliance ................................................................................................................................................................ 18

• Energy saving tips........................................................................................................................................................................18

PART 6: WHAT SHOULD I DO WHEN... ........................................................................................................... 19

PART 7: INFORMATION SHEET ...................................................................................................................... 21

EN - 2

08/2013

PART 1: BEFORE PUTTING INTO OPERATION

Safety precautions

Symbols:

General advice for the optimal operation of the appliance

General dangers

Hot surfaces

Before you put the appliance into operation

Important

This appliance is designed exclusively for storing bottles of wine. Do not use the appliance for purposes

other than those for which it was designed.

• Carefully study the user's manual and installation instructions before installing and using the appliance!

This user's manual includes important information regarding the installation, operation and maintenance

of the appliance. Store the user's manual also for future reference, or for other owners of the appliance

if the appliance is sold.

If the appliance is transported in a horizontal position the oil from the compressor may leak into the

cooling circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before

turning it on, so that the oil  ows back into the compressor.

After unpacking the appliance, carefully inspect that it has in not been damaged in any way. Also

check that the power cord is not damaged. If you discover any defects, turn o the appliance

and contact the vendor or in the case of a damaged power cord contact the service centre. If the

appliance and all its parts are in order, install it according to the instructions in the relevant chapter.

• When installing the appliance in its place, or when moving the appliance, the power cord could be

penetrated or damaged. Check that the power cord is not interfering anywhere.

• Before connecting the appliance to the electricity power source, check that the capacity of the system

corresponds to the speci cations on the appliance's rating label.

• Any kinds of home electric wiring necessary for the connection of the appliance must only be carried out

by a quali ed electrician.

If you move the appliance from its usual position, it is necessary to understand, that although you

have disconnected the power cord, the components on the rear side of the appliance may remain

very hot for some time.

This appliance may be built-in. Nonetheless, do not cover or block the air in ow or out ow openings.

Insu cient ventilation will cause poor operation and damage to the appliance.

EN - 3

08/2013

Operating the appliance

• Use the appliance only for the purposes for which it has been designed.

• This appliance is designed only for household use, for storing bottles of wine.

• The temperature inside the wine cooler may rise or fall slightly and so these appliances are not suitable

for storing products (e.g. medicines), which require a stable temperature.

Do not use any other electric appliances (e.g. heating elements, electric ice cream machines, etc.)

inside the appliance. There is a danger of explosion!

Do not place food inside the wine cooler containing  ammable propulsion gases (e.g. sprays) and

no explosives, contaminants or volatile substances. There is a danger of explosion!

• Do not use the base, racks, door of the appliance, etc. as a step or as a support. There is a danger of injury

to persons or damage to the appliance.

• Ensure that the plastic parts of the appliance and the door gasket seals are not soiled with oil or grease. The

plastic parts and the gasket seals would then become porous.

Children in the household

• Never leave packaging and its parts with children. There is a danger of poisoning or su ocation by the

cardboard boxes and plastic sheets!

• This appliance is in no way a toy for children!

• For appliances with door locks: do not leave keys within the reach of children!

• If you will no longer be using the wine cooler, remove the door, gasket seals and store it in a safe place.

In this way you will prevent the danger of children becoming trapped inside the wine cooler.

Maintenance and cleaning

Before you begin with regular or exceptional maintenance, disconnect the appliance's power cord

or turn o the fuse or circuit breaker. Never pull the electric power cord, only pull on the power plug.

Do not clean the appliance using a steam cleaning device! The steam may come into contact with

the electric components inside the appliance, where a short circuit could occur. There is a danger of

electric shock!

General instructions

• This appliance must not be used by persons (including children) with physical, sensory or psychological

impairments or by inexperienced persons, unless properly trained or schooled in the safe use of the

appliance, or unless they have been properly supervised by a person who will be responsible for their

safety. Children should be supervised so as not to play with the appliance.

• This appliance has been tested in accordance with the directives in force in the European Union.

• The tightness of the cooling circuit has been veri ed.

• This appliance conforms to the relevant safety provisions for electrical appliances in force in the European

Union.

Technical safety

The appliance contains a cooling gas, ISOBUTHAN (R600a). Only transport or move the appliance

with the utmost care, prevent excessive impacts and shaking to prevent damaging the appliance.

If the cooling circuit becomes damaged and the cooling gas may be escaping, there is a risk of an

explosion, which may be ignited by a spark or  ame. If the appliance shows signs of damage, it must

not be put into operation. In such a case contact the service centre, ventilate the room where the

appliance is located and prevent the spreading of  ames or other interference with the appliance.

EN - 4

08/2013

Safety instructions for gas R600a

Measures to be taken in the event of an unexpected release

If ventilation is possible, allow the material to evaporate.

Characteristics of the gas

The gas is highly  ammable, it is necessary to completely prevent contact with an open  ame and hot surfaces.

Because the R600a gas is heavier than air, it may become very concentrated at the level of the ground, where

ventilation is poor.

First aid

Inhalation

Take the a ected person from the contaminated area to a warm, well ventilated location. Staying

in a contaminated location for a long time may cause su ocation, or potentially lead to a loss of consciousness.

If necessary, provide mouth-to-mouth resuscitation and in exceptionally serious situations, under expert

medical supervision, give oxygen.

Contact with the skin

Accidental contact with the skin is not hazardous to health. Thoroughly wash the a ected area with water.

The liquid spray or dispersed liquid may cause frost bite, wash the a ected area with large amounts of water

and contact a medical doctor.

Contact with the eyes

If eyes have been a ected, wash out with large amounts of water, while trying to keep the eyes open, and call

a specialised doctor as soon as possible. If contact or inhalation of the R600a gas occurs, contact your medical

doctor.

EN - 5

08/2013

PART 2: DESCRIPTION OF THE APPLIANCE

PW 166 (Single Zone Wine Cooler)

Description of the appliance

1 Exterior surface

2 Handle

3 Levelling feet

4 Top right hinge

5 Control panel

6 Door

7 Long rack

8 Short rack

9 Lock

q; Ventilation grill

1

2

3

4

7

8

5

6

9

q;

Description of the control panel

1 On/O button

2 Internal light button

3 Display

4 Increase temperature button

5 Decrease temperature button

6 Lock / Unlock button

7 °C / °F toggle switch

12 3 45

67

EN - 6

08/2013

PW 166 D (Dual Zone Wine Cooler)

Description of the appliance

1 Exterior surface

2 Handle

3 Levelling feet

4 Top right hinge

5 Door

6 Long rack

7 Control panel

8 Short rack

9 Lock

q; Ventilation grill

1

2

3

4

6

9

5

q;

7

8

Description of the control panel

1 Lock / Unlock button

2 Display for the top zone

3 Increase temperature button

4 Decrease temperature button

5 On/O button

6 Internal light button

7 °C / °F toggle switch

8 Display for the bottom zone

9 Zone selection button

1234

5867 9

EN - 7

08/2013

PW 96 (Single Zone Wine Cooler)

Description of the appliance

1 Exterior surface

2 Handle

3 Levelling feet

4 Top right hinge

5 Control panel

6 Door

7 Long rack

8 Short rack

9 Lock

q; Ventilation openings

1

2

3

4

7

8

5

6

9

q;

Description of the control panel

1 Power On/O button

2 Internal light button

3 Display

4 Increase temperature button

5 Decrease temperature button

6 Lock / Unlock button

7 Switch C/F button

12 3 45

67

EN - 8

08/2013

PART 3: INSTALLATION

Transport and unpacking

If the appliance is transported in a horizontal position the oil from the compressor may leak into the cooling

circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before turning it on, so that

the oil  ows back into the compressor.

Remove the external packaging, remove the protective plastic  lm from the surface of the appliance

(if used) and clean the external parts of the appliance with an agent designed for this purpose. Do

not use steel wool or any coarse agents, which could irreparably damage the surface of the appliance.

Carefully remove all papers and adhesive tape from the appliance, the door and other parts packed

in polystyrene. Remove documents and accessories from inside the appliance.

The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local

regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,

because they present a possible source of danger.

Carefully inspect the appliance. If you discover any defects, stop the installation and contact the vendor.

As a rule the appliance comes with:

- user's manual;

- 15 slide-out racks (14 with a wheel system) on the PW 166 model; 14 slide-out racks (13 with a wheel

system) on the PW 166D model; 9 pull-out racks (7 with a wheel system) on model PW96.

- 2 keys;

- accessories for changing the door opening direction.

Operating conditions

Proper operation of the appliance is guaranteed only if the following conditions are met:

The temperature in the room where the appliance is located conforms to the climate class stated on the

appliance's rating label.

Maximum ambient relative humidity: 90%.

The appliance must be placed at a su cient distance from heat sources (e.g. baking ovens, central heating,

direct sunlight, etc.).

The appliance must be located in such a place that it is protected against the e ects of weather.

Regular maintenance is performed according to the instructions in this user's manual.

The ventilation openings in the cover of the appliance must not be covered by anything.

Correct installation (e.g. levelling, the capacity of the system corresponds to the speci cations on the rating

label of the appliance).

Table – Climatic class

Climatic class Ambient temperature

SN +10°C to +32°C

N +16°C to +32°C

ST +16°C to +38°C

T +16°C to +43°C

EN - 9

08/2013

Installation location

The installation location of the appliance must meet the requirements in the paragraph "Operating conditions"

and must have a stable  oor with a load bearing capacity corresponding to the weight of the appliance.

The appliance may be built-in. For installation it is necessary to provide for and adhere to the dimensions

illustrated below.

Level the appliance using the adjustable feet, ensure there is a gap between the bottom edge of the appliance

and the ground, so that there is su cient circulation of the cooling air; in this way you will ensure the optimal

performance of the cooling circuit.

Check whether any cooling circulation pipes have been damaged during the installation.

• Use the appliance only for the purposes for which it has been designed.

• The appliance must be located on a rigid and even surface.

In this way you will ensure free circulation of the coolant and e ective operation of your appliance.

• If possible, place the appliance into a cool, well ventilated and dry room.

• Do not locate the appliance in direct sunlight, or in a room with a high temperature, in the vicinity of any

sources of direct heat, such as heating, an oven, a stove, etc. – this would mean that the compressor would

need to work a lot harder resulting in a substantially higher power consumption level.

If it is not possible to prevent the installation in the vicinity of a heat source, we recommend the insertion of an

appropriate insulating board (do not use asbestos) between the appliance and the heat source; or at least to

maintain the following minimum distances:

• From a gas or electric stove 3 cm;

• From a heater or oven, etc. 30 cm;

• From another cooling appliance 2 cm.

Do not place any other appliances on the appliance, which release heat on to the appliance, such as microwave

ovens, toasters, etc.

Never cover the ventilation grill. Pull out the power plug by pulling on the plug itself, never pull on the cord

when disconnecting the appliance.

Before turning on the appliance allow it to stand in its  nal location for 12 hours, the coolant circuit

will stabilise in this way and no operating problems will occur. Before connecting the appliance to

the power grid check that it is perfectly dry inside – especially in the corners.

Danger warning

The coolant may be highly  ammable, depending on its composition. The coolant circuit was hermetically

closed and sealed and was tested many times for possible leaks. Any unquali ed tampering with the product

may cause a  re hazard. Check that there is no mechanical interruption or e ect on the coolant circulation,

namely in the accessible parts around the compressor.

Only professionally quali ed persons may work on the cooling system.

NOTE:

The appliance is made with a zero requirement for the opening of the door, meaning no additional space

is needed for the door to open.

EN - 10

08/2013

Built-in

The appliance may be built-in. In such a case it is necessary to adhere to the built-in space requirements

as shown in the provided diagrams. The provided dimensions are the minimum required dimensions.

ı1770

1770

ı730

ı635

595

680

Unit: mm

Models:

PW 166

PW 166 D

PW 96

Unit: mm

EN - 11

08/2013

Cleaning before use

Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the

inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this way

you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive

agents, which could damage the surfaces.

Electrical connection

Before connecting the power plug to the power socket, check that:

• Your hands are completely dry.

• The voltage and frequency shown on the rating label of the appliance corresponds to that in the home

power grid (permitted tolerance from -6% to +6% for nominal voltage, for use with di erent voltages, use

a voltage converter with the corresponding parameters).

• The cord and the plug are not damaged or caught under heavy objects.

• The power cord is not to be excessively tensioned; it is not permitted to use an extension cord.

Do not connect the appliance to a voltage recti er (e.g. solar power plant) or use an extension cord.

The appliance must be connected to a working grounding lead.

If the power socket of the home system is not grounded in accordance with the current legal regulations, only

connect the appliance after consulting with a specialised technician about the grounding lead itself.

The manufacturer takes no responsibility for injuries caused as a result of not following these instructions.

If you do not correctly level the appliance during the installation, the door may not close shut and seal properly,

which may cause problems with the cooling, ice build up or moisture. Levelling the appliance is very important.

Level the appliance using the levelling feet – turn them clockwise to lift the appliance and turn them

anticlockwise to lower the appliance.

Changing the door opening direction

These instructions are for the procedure for changing the opening direction for a door mounted on the right hinges.

To change the door opening direction from the right side to the left side, the following spare parts are

necessary: top left hinge and bottom left hinge. We recommend that you carefully store all removed parts for

the event that the door opening direction may need to be changed.

IMPORTANT INFORMATION

We recommend that you secure the racks in place using adhesive tape to prevent causing damage when

handling the appliance.

EN - 12

08/2013

1. Remove the hinge cover (1) and the hinge cover (2) using a  at-head screwdriver. Screw out the screws of

the mounted hinge (3a) and remove the top hinge. Now carefully take the door (5) o the bottom hinge

and place it to the side in a safe location. It is important that you do not lose the washer (11) of the bottom

hinge and door because you will need it.

2. Remove the lock cover (6) and screws (7) and (8) from the top hinge. Screw out screws (3b) to remove the

support hinge draw bar (9) from the bottom part of the door. Now rotate the door by 180° and mount the

support hinge draw bar (9) to the top corner using screws (3b). Check that the draw bar is installed correctly.

EN - 13

08/2013

3. Use a  at-head screwdriver to remove the bottom hinge cover (12) and screw out the screws (3c) and

(13), including the bottom hinge (10). Move the bottom hinge to the other side and secure in place using

screws (3c) and (8). Place the bottom hinge cover (12) over the place of the initial bottom hinge (10).

4. Place the washer (11) on to the support hinge draw bar (9). Seat the door on to the bottom hinge so that

the support hinge draw bar (9) is  ush with the outer hole of the bottom hinge. Use screws (3a) to install

the top hinge. Install the lock cover (6) and screws (7) and (8) and also attach the hinge cover.

NOTE:

The door handle is permanently attached at the factory. After changing the door opening direction, it is

not necessary to reinstall the handle, as rotating the door by 180° also ensures that the handle is rotated.

EN - 14

08/2013

PART 4: CONTROLS

Turning on / o

The appliance will turn on automatically after the power cord is connected to a power socket.

Press and hold down the On / O button for 10 seconds to turn the appliance on/o .

The On / O button will work even when the lock function is activated on the control panel.

WARNING:

To prevent damaging the compressor, after turning o the appliance wait at least 5 minutes before

turning it on again.

Locking / unlocking the control panel

To unlock the control panel press and hold down the On / O button and the internal lighting button for

3 seconds. A sound will be made.

The control panel will automatically lock itself after 10 seconds of inactivity. A sound will be made indicating

that the lock is activated.

No button will be active in the locked mode, except for On / O .

Turning the internal lighting on / o

With the control panel unlocked, press the internal lighting button to turn the internal lighting on / o .

The internal area will remain lit until you press the internal lighting button.

Display

The display shows the set temperature. If you change the temperature, the temperature inside the appliance

will change after approximately 10 seconds.

If the temperature sensor is out of order, the display will show "HH" or "LL" instead of digits and a sound will be

made. If this occurs the appliance can maintain its temperature using the compressor and fan.

WARNING:

To prevent the stored wine from spoiling, it is necessary to regularly check the appliance and in the

event of a malfunction to contact an authorised service centre. The appliance is not able to maintain

temperature by means of the compressor and fan for an extended period of time.

EN - 15

08/2013

Setting the temperature

PW 166 / PW 96 (Single Zone Wine Cooler)

The temperature may be set in the range 5 – 22 °C.

To set the temperature, repeatedly press the increase or decrease temperature buttons.

When the temperature increase / decrease button is  rst pressed the previously set temperature is recalled.

If the appliance is turned on after an interruption to the power supply, the temperature will be set to the

default temperature of 12 °C.

Press the temperature increase / decrease buttons once to increase or decrease the temperature by 1 °C.

The newly set temperature inside the appliance will be shown on the display approximately 10 seconds after

being set.

PW 166 (Dual Zone Wine Cooler)

The temperature setting range is from 5 to 12 °C in the top zone and 12 to 22 °C in the bottom zone.

To select a zone press the zone selection button. The display of the selected zone together with a symbol will

start  ashing / be lit.

To set the temperature, repeatedly press the increase or decrease temperature buttons.

When the temperature increase / decrease button is  rst pressed the previously set temperature is recalled.

If the appliance is turned on after an interruption to the power supply, the temperature will be set to the

default temperature of 10 °C for the top zone and 16 °C for the bottom zone.

Press the temperature increase / decrease buttons once to increase or decrease the temperature by 1 °C.

The newly set temperature inside the appliance will be shown on the display approximately 10 seconds after

being set.

NOTE:

When it is  rst turned on, or turned on after being o for a long time, it is possible that there will be

a di erence between the set temperature and the temperature shown on the display. This is normal and

this di erence will disappear after several hours.

Switching between °C and °F

PW 166 / PW 96 (Single Zone Wine Cooler)

Press and hold down the temperature increase and temperature decrease buttons for 5 seconds to change the

temperature unit from °C to °F and vice versa.

PW 166 (Dual Zone Wine Cooler)

Directly press the °C / °F toggle button to change the temperature units from °C to °F and vice versa.

NOTE:

The temperature may change depending on whether the internal light is turned on or o , the arrangement

of the bottles and other conditions.

EN - 16

08/2013

Storing wine

The racks are designed for storing wine in Bordeaux type bottles. The maximum number of bottles may di er

depending on the size and dimensions of the actual bottles.

To prevent damaging the gasket seal, check that the door is fully open before sliding out the rack.

Store only originally corked wine bottles.

Do not cover the rack with aluminium foil or any other material in any way that could prevent the free

circulation of air.

Depending on the system, the racks are equipped with a wheel system for easier handling. However, never

slide out more than one rack.

The load bearing capacity of the racks is approximately 20 kg with each providing space for about 11 to

13 bottles.

If you will not be using the appliance for an extended period of time, we recommend that you disconnect the

power cord from the power socket, clean it and leave the door slightly open so that air can circulate freely

avoiding undesirable odours, moisture, etc.

Table of recommended wine storage temperatures

Type of wine Recommended

temperature

Red wine 15 – 18 °C (59 – 64 °F)

Dry / White wine 9 – 14 °C (48 – 57 °F)

Rosé wine 10 – 11 °C (50 – 52 °F)

Sparkling wine 5 – 8 °C (41 – 46 °F)

Door lock

The appliance is supplied with a door lock.

As a rule the keys are located in a plastic bag that comes together with the user's manual.

To lock / unlock the door it is necessary to use the supplied keys.

EN - 17

08/2013

PART 5: REGULAR MAINTENANCE

Cleaning the appliance

Before commencing to clean the refrigerator disconnect it from the power source.

Wipe the internal surface of the appliance with a soft sponge lightly dipped in a table salt solution. Add

2 tablespoons of table salt into 1 litre of warm water.

Wash the racks in warm water with a small amount of kitchen dishwashing liquid, rinse and wipe dry. Allow

the wooden racks (if the wine cooler has them) to dry completely before returning them to the wine cooler.

All parts that you wash with a soft sponge lightly dipped in water must be properly wiped dry.

Wipe the outer surface with a soft sponge lightly dipped in water with a small amount of dishwashing liquid.

Wipe dry using a clean cloth.

WARNING:

Do not use steel wool or sponges with steel wool on stainless steel surfaces. They could damage the

surface.

Do not use cleaning waxes, concentrated cleaning agents, bleaches or cleaning products containing

kerosene to clean the plastic or rubber parts.

Never use paper towels or window cleaners on the plastic parts.

The use of steam cleaning appliances is extremely dangerous and so is strictly forbidden.

Removing the racks

Before removing racks from the appliance it is necessary to remove all the bottles in the given rack.

Pull the rack out as far as it will go. Press the left safety lever downwards and at the same time push the right

safety lever upwards. Now remove the rack.

EN - 18

08/2013

Power outage

Most power outages are recti ed within a few hours and should not have an e ect on the temperature inside

the appliance if you limit its ventilation. However, in the event of an extended power outage it is necessary

to take appropriate steps to prevent the contents inside the appliance from spoiling.

Taking out of operation for an extended period

If you are not going to use the refrigerator for an extended period of time, do the following:

Disconnect the refrigerator from the power source by pulling it out of the power socket. Clean out the inside

and dry it out as described in the part Cleaning the refrigerator. Leave the door open to prevent an unpleasant

odour forming inside.

Moving

Before moving it, it is necessary to remove all contents from the appliance.

Secure freely moving parts inside the wine cooler (racks), e.g. using adhesive tape.

To prevent damage, screw in the levelling feet.

Secure the door, e.g. using adhesive tape.

Ensure that the appliance always remains in a vertical position while being transported. To prevent

the appliance from damage during transport you can cover it with a blanket or another soft textile.

Energy saving tips

Locate the appliance away from sources of heat and out of direct sunlight.

Ensure su cient ventilation. Under no circumstances should you cover the ventilation openings.

Only open the door when necessary. Do not leave the door open for a long time or open / close the door

too often.

Stránka sa načítava ...

Philco PW 96 Návod na obsluhu

Táto príručka je tiež vhodná pre

Philco PW 96 Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty