Philco PW 166 D Návod na obsluhu

Kategória
Chladničky
Typ
Návod na obsluhu

Táto príručka je tiež vhodná pre

Wine cooler
USER'S MANUAL
PW 96
PW 166
PW 166D
Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read
all the instructions in this user's manual.
EN - 1
08/2013
Copyright © 2013, Fast ČR, a. s.
CONTENTS
PART 1: BEFORE PUTTING INTO OPERATION ................................................................................................. 2
• Safety precautions ..........................................................................................................................................................................2
Safety instructions for gas R600a ..............................................................................................................................................4
PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 5
PW 166 (Single Zone Wine Cooler) ...........................................................................................................................................5
PW 166 D (Dual Zone Wine Cooler) ..........................................................................................................................................6
PW 96 (Single Zone Wine Cooler) .............................................................................................................................................7
PART 3: INSTALLATION .................................................................................................................................... 8
Transport and unpacking ............................................................................................................................................................8
• Operating conditions ....................................................................................................................................................................8
• Installation location .......................................................................................................................................................................9
• Built-in installation ...................................................................................................................................................................... 10
Cleaning before use .................................................................................................................................................................... 11
• Electrical connection ..................................................................................................................................................................11
Changing the door opening direction .................................................................................................................................11
PART 4: CONTROLS ........................................................................................................................................ 14
Turning on / o ............................................................................................................................................................................. 14
Locking / unlocking the control panel .................................................................................................................................14
Turning the internal lighting on / o ....................................................................................................................................14
Setting the temperature ........................................................................................................................................................... 15
• Storing wine ..................................................................................................................................................................................16
PART 5: REGULAR MAINTENANCE ................................................................................................................ 17
Cleaning the appliance ..............................................................................................................................................................17
Moving the appliance ................................................................................................................................................................ 18
Energy saving tips........................................................................................................................................................................18
PART 6: WHAT SHOULD I DO WHEN... ........................................................................................................... 19
PART 7: INFORMATION SHEET ...................................................................................................................... 21
EN - 2
08/2013
Copyright © 2013, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Safety precautions
Symbols:
General advice for the optimal operation of the appliance
General dangers
Hot surfaces
Before you put the appliance into operation
Important
This appliance is designed exclusively for storing bottles of wine. Do not use the appliance for purposes
other than those for which it was designed.
Carefully study the user's manual and installation instructions before installing and using the appliance!
This user's manual includes important information regarding the installation, operation and maintenance
of the appliance. Store the user's manual also for future reference, or for other owners of the appliance
if the appliance is sold.
If the appliance is transported in a horizontal position the oil from the compressor may leak into the
cooling circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before
turning it on, so that the oil  ows back into the compressor.
After unpacking the appliance, carefully inspect that it has in not been damaged in any way. Also
check that the power cord is not damaged. If you discover any defects, turn o the appliance
and contact the vendor or in the case of a damaged power cord contact the service centre. If the
appliance and all its parts are in order, install it according to the instructions in the relevant chapter.
When installing the appliance in its place, or when moving the appliance, the power cord could be
penetrated or damaged. Check that the power cord is not interfering anywhere.
Before connecting the appliance to the electricity power source, check that the capacity of the system
corresponds to the speci cations on the appliance's rating label.
Any kinds of home electric wiring necessary for the connection of the appliance must only be carried out
by a quali ed electrician.
If you move the appliance from its usual position, it is necessary to understand, that although you
have disconnected the power cord, the components on the rear side of the appliance may remain
very hot for some time.
This appliance may be built-in. Nonetheless, do not cover or block the air in ow or out ow openings.
Insu cient ventilation will cause poor operation and damage to the appliance.
EN - 3
08/2013
Copyright © 2013, Fast ČR, a. s.
Operating the appliance
Use the appliance only for the purposes for which it has been designed.
This appliance is designed only for household use, for storing bottles of wine.
The temperature inside the wine cooler may rise or fall slightly and so these appliances are not suitable
for storing products (e.g. medicines), which require a stable temperature.
Do not use any other electric appliances (e.g. heating elements, electric ice cream machines, etc.)
inside the appliance. There is a danger of explosion!
Do not place food inside the wine cooler containing  ammable propulsion gases (e.g. sprays) and
no explosives, contaminants or volatile substances. There is a danger of explosion!
Do not use the base, racks, door of the appliance, etc. as a step or as a support. There is a danger of injury
to persons or damage to the appliance.
Ensure that the plastic parts of the appliance and the door gasket seals are not soiled with oil or grease. The
plastic parts and the gasket seals would then become porous.
Children in the household
Never leave packaging and its parts with children. There is a danger of poisoning or su ocation by the
cardboard boxes and plastic sheets!
This appliance is in no way a toy for children!
For appliances with door locks: do not leave keys within the reach of children!
If you will no longer be using the wine cooler, remove the door, gasket seals and store it in a safe place.
In this way you will prevent the danger of children becoming trapped inside the wine cooler.
Maintenance and cleaning
Before you begin with regular or exceptional maintenance, disconnect the appliance's power cord
or turn o the fuse or circuit breaker. Never pull the electric power cord, only pull on the power plug.
Do not clean the appliance using a steam cleaning device! The steam may come into contact with
the electric components inside the appliance, where a short circuit could occur. There is a danger of
electric shock!
General instructions
This appliance must not be used by persons (including children) with physical, sensory or psychological
impairments or by inexperienced persons, unless properly trained or schooled in the safe use of the
appliance, or unless they have been properly supervised by a person who will be responsible for their
safety. Children should be supervised so as not to play with the appliance.
This appliance has been tested in accordance with the directives in force in the European Union.
The tightness of the cooling circuit has been veri ed.
This appliance conforms to the relevant safety provisions for electrical appliances in force in the European
Union.
Technical safety
The appliance contains a cooling gas, ISOBUTHAN (R600a). Only transport or move the appliance
with the utmost care, prevent excessive impacts and shaking to prevent damaging the appliance.
If the cooling circuit becomes damaged and the cooling gas may be escaping, there is a risk of an
explosion, which may be ignited by a spark or  ame. If the appliance shows signs of damage, it must
not be put into operation. In such a case contact the service centre, ventilate the room where the
appliance is located and prevent the spreading of  ames or other interference with the appliance.
EN - 4
08/2013
Copyright © 2013, Fast ČR, a. s.
Safety instructions for gas R600a
Measures to be taken in the event of an unexpected release
If ventilation is possible, allow the material to evaporate.
Characteristics of the gas
The gas is highly  ammable, it is necessary to completely prevent contact with an open  ame and hot surfaces.
Because the R600a gas is heavier than air, it may become very concentrated at the level of the ground, where
ventilation is poor.
First aid
Inhalation
Take the a ected person from the contaminated area to a warm, well ventilated location. Staying
in a contaminated location for a long time may cause su ocation, or potentially lead to a loss of consciousness.
If necessary, provide mouth-to-mouth resuscitation and in exceptionally serious situations, under expert
medical supervision, give oxygen.
Contact with the skin
Accidental contact with the skin is not hazardous to health. Thoroughly wash the a ected area with water.
The liquid spray or dispersed liquid may cause frost bite, wash the a ected area with large amounts of water
and contact a medical doctor.
Contact with the eyes
If eyes have been a ected, wash out with large amounts of water, while trying to keep the eyes open, and call
a specialised doctor as soon as possible. If contact or inhalation of the R600a gas occurs, contact your medical
doctor.
EN - 5
08/2013
Copyright © 2013, Fast ČR, a. s.
PART 2: DESCRIPTION OF THE APPLIANCE
PW 166 (Single Zone Wine Cooler)
Description of the appliance
1 Exterior surface
2 Handle
3 Levelling feet
4 Top right hinge
5 Control panel
6 Door
7 Long rack
8 Short rack
9 Lock
q; Ventilation grill
1
2
3
4
7
8
5
6
9
q;
Description of the control panel
1 On/O button
2 Internal light button
3 Display
4 Increase temperature button
5 Decrease temperature button
6 Lock / Unlock button
7 °C / °F toggle switch
12 3 45
67
EN - 6
08/2013
Copyright © 2013, Fast ČR, a. s.
PW 166 D (Dual Zone Wine Cooler)
Description of the appliance
1 Exterior surface
2 Handle
3 Levelling feet
4 Top right hinge
5 Door
6 Long rack
7 Control panel
8 Short rack
9 Lock
q; Ventilation grill
1
2
3
4
6
9
5
q;
7
8
Description of the control panel
1 Lock / Unlock button
2 Display for the top zone
3 Increase temperature button
4 Decrease temperature button
5 On/O button
6 Internal light button
7 °C / °F toggle switch
8 Display for the bottom zone
9 Zone selection button
1234
5867 9
EN - 7
08/2013
Copyright © 2013, Fast ČR, a. s.
PW 96 (Single Zone Wine Cooler)
Description of the appliance
1 Exterior surface
2 Handle
3 Levelling feet
4 Top right hinge
5 Control panel
6 Door
7 Long rack
8 Short rack
9 Lock
q; Ventilation openings
1
2
3
4
7
8
5
6
9
q;
Description of the control panel
1 Power On/O button
2 Internal light button
3 Display
4 Increase temperature button
5 Decrease temperature button
6 Lock / Unlock button
7 Switch C/F button
12 3 45
67
EN - 8
08/2013
Copyright © 2013, Fast ČR, a. s.
PART 3: INSTALLATION
Transport and unpacking
If the appliance is transported in a horizontal position the oil from the compressor may leak into the cooling
circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before turning it on, so that
the oil  ows back into the compressor.
Remove the external packaging, remove the protective plastic  lm from the surface of the appliance
(if used) and clean the external parts of the appliance with an agent designed for this purpose. Do
not use steel wool or any coarse agents, which could irreparably damage the surface of the appliance.
Carefully remove all papers and adhesive tape from the appliance, the door and other parts packed
in polystyrene. Remove documents and accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,
because they present a possible source of danger.
Carefully inspect the appliance. If you discover any defects, stop the installation and contact the vendor.
As a rule the appliance comes with:
- user's manual;
- 15 slide-out racks (14 with a wheel system) on the PW 166 model; 14 slide-out racks (13 with a wheel
system) on the PW 166D model; 9 pull-out racks (7 with a wheel system) on model PW96.
- 2 keys;
- accessories for changing the door opening direction.
Operating conditions
Proper operation of the appliance is guaranteed only if the following conditions are met:
The temperature in the room where the appliance is located conforms to the climate class stated on the
appliance's rating label.
Maximum ambient relative humidity: 90%.
The appliance must be placed at a su cient distance from heat sources (e.g. baking ovens, central heating,
direct sunlight, etc.).
The appliance must be located in such a place that it is protected against the e ects of weather.
Regular maintenance is performed according to the instructions in this user's manual.
The ventilation openings in the cover of the appliance must not be covered by anything.
Correct installation (e.g. levelling, the capacity of the system corresponds to the speci cations on the rating
label of the appliance).
Table – Climatic class
Climatic class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
EN - 9
08/2013
Copyright © 2013, Fast ČR, a. s.
Installation location
The installation location of the appliance must meet the requirements in the paragraph "Operating conditions"
and must have a stable  oor with a load bearing capacity corresponding to the weight of the appliance.
The appliance may be built-in. For installation it is necessary to provide for and adhere to the dimensions
illustrated below.
Level the appliance using the adjustable feet, ensure there is a gap between the bottom edge of the appliance
and the ground, so that there is su cient circulation of the cooling air; in this way you will ensure the optimal
performance of the cooling circuit.
Check whether any cooling circulation pipes have been damaged during the installation.
Use the appliance only for the purposes for which it has been designed.
The appliance must be located on a rigid and even surface.
In this way you will ensure free circulation of the coolant and e ective operation of your appliance.
If possible, place the appliance into a cool, well ventilated and dry room.
Do not locate the appliance in direct sunlight, or in a room with a high temperature, in the vicinity of any
sources of direct heat, such as heating, an oven, a stove, etc. – this would mean that the compressor would
need to work a lot harder resulting in a substantially higher power consumption level.
If it is not possible to prevent the installation in the vicinity of a heat source, we recommend the insertion of an
appropriate insulating board (do not use asbestos) between the appliance and the heat source; or at least to
maintain the following minimum distances:
From a gas or electric stove 3 cm;
From a heater or oven, etc. 30 cm;
From another cooling appliance 2 cm.
Do not place any other appliances on the appliance, which release heat on to the appliance, such as microwave
ovens, toasters, etc.
Never cover the ventilation grill. Pull out the power plug by pulling on the plug itself, never pull on the cord
when disconnecting the appliance.
Before turning on the appliance allow it to stand in its  nal location for 12 hours, the coolant circuit
will stabilise in this way and no operating problems will occur. Before connecting the appliance to
the power grid check that it is perfectly dry inside – especially in the corners.
Danger warning
The coolant may be highly  ammable, depending on its composition. The coolant circuit was hermetically
closed and sealed and was tested many times for possible leaks. Any unquali ed tampering with the product
may cause a  re hazard. Check that there is no mechanical interruption or e ect on the coolant circulation,
namely in the accessible parts around the compressor.
Only professionally quali ed persons may work on the cooling system.
NOTE:
The appliance is made with a zero requirement for the opening of the door, meaning no additional space
is needed for the door to open.
EN - 10
08/2013
Copyright © 2013, Fast ČR, a. s.
Built-in
The appliance may be built-in. In such a case it is necessary to adhere to the built-in space requirements
as shown in the provided diagrams. The provided dimensions are the minimum required dimensions.
ı1770
1770
ı730
ı635
595
680
Unit: mm
Models:
PW 166
PW 166 D
PW 96
Unit: mm
EN - 11
08/2013
Copyright © 2013, Fast ČR, a. s.
Cleaning before use
Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the
inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this way
you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive
agents, which could damage the surfaces.
Electrical connection
Before connecting the power plug to the power socket, check that:
Your hands are completely dry.
The voltage and frequency shown on the rating label of the appliance corresponds to that in the home
power grid (permitted tolerance from -6% to +6% for nominal voltage, for use with di erent voltages, use
a voltage converter with the corresponding parameters).
The cord and the plug are not damaged or caught under heavy objects.
The power cord is not to be excessively tensioned; it is not permitted to use an extension cord.
Do not connect the appliance to a voltage recti er (e.g. solar power plant) or use an extension cord.
The appliance must be connected to a working grounding lead.
If the power socket of the home system is not grounded in accordance with the current legal regulations, only
connect the appliance after consulting with a specialised technician about the grounding lead itself.
The manufacturer takes no responsibility for injuries caused as a result of not following these instructions.
If you do not correctly level the appliance during the installation, the door may not close shut and seal properly,
which may cause problems with the cooling, ice build up or moisture. Levelling the appliance is very important.
Level the appliance using the levelling feet – turn them clockwise to lift the appliance and turn them
anticlockwise to lower the appliance.
Changing the door opening direction
These instructions are for the procedure for changing the opening direction for a door mounted on the right hinges.
To change the door opening direction from the right side to the left side, the following spare parts are
necessary: top left hinge and bottom left hinge. We recommend that you carefully store all removed parts for
the event that the door opening direction may need to be changed.
IMPORTANT INFORMATION
We recommend that you secure the racks in place using adhesive tape to prevent causing damage when
handling the appliance.
EN - 12
08/2013
Copyright © 2013, Fast ČR, a. s.
1. Remove the hinge cover (1) and the hinge cover (2) using a  at-head screwdriver. Screw out the screws of
the mounted hinge (3a) and remove the top hinge. Now carefully take the door (5) o the bottom hinge
and place it to the side in a safe location. It is important that you do not lose the washer (11) of the bottom
hinge and door because you will need it.
2. Remove the lock cover (6) and screws (7) and (8) from the top hinge. Screw out screws (3b) to remove the
support hinge draw bar (9) from the bottom part of the door. Now rotate the door by 180° and mount the
support hinge draw bar (9) to the top corner using screws (3b). Check that the draw bar is installed correctly.
EN - 13
08/2013
Copyright © 2013, Fast ČR, a. s.
3. Use a  at-head screwdriver to remove the bottom hinge cover (12) and screw out the screws (3c) and
(13), including the bottom hinge (10). Move the bottom hinge to the other side and secure in place using
screws (3c) and (8). Place the bottom hinge cover (12) over the place of the initial bottom hinge (10).
4. Place the washer (11) on to the support hinge draw bar (9). Seat the door on to the bottom hinge so that
the support hinge draw bar (9) is  ush with the outer hole of the bottom hinge. Use screws (3a) to install
the top hinge. Install the lock cover (6) and screws (7) and (8) and also attach the hinge cover.
NOTE:
The door handle is permanently attached at the factory. After changing the door opening direction, it is
not necessary to reinstall the handle, as rotating the door by 180° also ensures that the handle is rotated.
EN - 14
08/2013
Copyright © 2013, Fast ČR, a. s.
PART 4: CONTROLS
Turning on / o
The appliance will turn on automatically after the power cord is connected to a power socket.
Press and hold down the On / O button for 10 seconds to turn the appliance on/o .
The On / O button will work even when the lock function is activated on the control panel.
WARNING:
To prevent damaging the compressor, after turning o the appliance wait at least 5 minutes before
turning it on again.
Locking / unlocking the control panel
To unlock the control panel press and hold down the On / O button and the internal lighting button for
3 seconds. A sound will be made.
The control panel will automatically lock itself after 10 seconds of inactivity. A sound will be made indicating
that the lock is activated.
No button will be active in the locked mode, except for On / O .
Turning the internal lighting on / o
With the control panel unlocked, press the internal lighting button to turn the internal lighting on / o .
The internal area will remain lit until you press the internal lighting button.
Display
The display shows the set temperature. If you change the temperature, the temperature inside the appliance
will change after approximately 10 seconds.
If the temperature sensor is out of order, the display will show "HH" or "LL" instead of digits and a sound will be
made. If this occurs the appliance can maintain its temperature using the compressor and fan.
WARNING:
To prevent the stored wine from spoiling, it is necessary to regularly check the appliance and in the
event of a malfunction to contact an authorised service centre. The appliance is not able to maintain
temperature by means of the compressor and fan for an extended period of time.
EN - 15
08/2013
Copyright © 2013, Fast ČR, a. s.
Setting the temperature
PW 166 / PW 96 (Single Zone Wine Cooler)
The temperature may be set in the range 5 – 22 °C.
To set the temperature, repeatedly press the increase or decrease temperature buttons.
When the temperature increase / decrease button is  rst pressed the previously set temperature is recalled.
If the appliance is turned on after an interruption to the power supply, the temperature will be set to the
default temperature of 12 °C.
Press the temperature increase / decrease buttons once to increase or decrease the temperature by 1 °C.
The newly set temperature inside the appliance will be shown on the display approximately 10 seconds after
being set.
PW 166 (Dual Zone Wine Cooler)
The temperature setting range is from 5 to 12 °C in the top zone and 12 to 22 °C in the bottom zone.
To select a zone press the zone selection button. The display of the selected zone together with a symbol will
start  ashing / be lit.
To set the temperature, repeatedly press the increase or decrease temperature buttons.
When the temperature increase / decrease button is  rst pressed the previously set temperature is recalled.
If the appliance is turned on after an interruption to the power supply, the temperature will be set to the
default temperature of 10 °C for the top zone and 16 °C for the bottom zone.
Press the temperature increase / decrease buttons once to increase or decrease the temperature by 1 °C.
The newly set temperature inside the appliance will be shown on the display approximately 10 seconds after
being set.
NOTE:
When it is  rst turned on, or turned on after being o for a long time, it is possible that there will be
a di erence between the set temperature and the temperature shown on the display. This is normal and
this di erence will disappear after several hours.
Switching between °C and °F
PW 166 / PW 96 (Single Zone Wine Cooler)
Press and hold down the temperature increase and temperature decrease buttons for 5 seconds to change the
temperature unit from °C to °F and vice versa.
PW 166 (Dual Zone Wine Cooler)
Directly press the °C / °F toggle button to change the temperature units from °C to °F and vice versa.
NOTE:
The temperature may change depending on whether the internal light is turned on or o , the arrangement
of the bottles and other conditions.
EN - 16
08/2013
Copyright © 2013, Fast ČR, a. s.
Storing wine
The racks are designed for storing wine in Bordeaux type bottles. The maximum number of bottles may di er
depending on the size and dimensions of the actual bottles.
To prevent damaging the gasket seal, check that the door is fully open before sliding out the rack.
Store only originally corked wine bottles.
Do not cover the rack with aluminium foil or any other material in any way that could prevent the free
circulation of air.
Depending on the system, the racks are equipped with a wheel system for easier handling. However, never
slide out more than one rack.
The load bearing capacity of the racks is approximately 20 kg with each providing space for about 11 to
13 bottles.
If you will not be using the appliance for an extended period of time, we recommend that you disconnect the
power cord from the power socket, clean it and leave the door slightly open so that air can circulate freely
avoiding undesirable odours, moisture, etc.
Table of recommended wine storage temperatures
Type of wine Recommended
temperature
Red wine 15 – 18 °C (59 – 64 °F)
Dry / White wine 9 – 14 °C (48 – 57 °F)
Rosé wine 10 – 11 °C (50 – 52 °F)
Sparkling wine 5 – 8 °C (41 – 46 °F)
Door lock
The appliance is supplied with a door lock.
As a rule the keys are located in a plastic bag that comes together with the user's manual.
To lock / unlock the door it is necessary to use the supplied keys.
EN - 17
08/2013
Copyright © 2013, Fast ČR, a. s.
PART 5: REGULAR MAINTENANCE
Cleaning the appliance
Before commencing to clean the refrigerator disconnect it from the power source.
Wipe the internal surface of the appliance with a soft sponge lightly dipped in a table salt solution. Add
2 tablespoons of table salt into 1 litre of warm water.
Wash the racks in warm water with a small amount of kitchen dishwashing liquid, rinse and wipe dry. Allow
the wooden racks (if the wine cooler has them) to dry completely before returning them to the wine cooler.
All parts that you wash with a soft sponge lightly dipped in water must be properly wiped dry.
Wipe the outer surface with a soft sponge lightly dipped in water with a small amount of dishwashing liquid.
Wipe dry using a clean cloth.
WARNING:
Do not use steel wool or sponges with steel wool on stainless steel surfaces. They could damage the
surface.
Do not use cleaning waxes, concentrated cleaning agents, bleaches or cleaning products containing
kerosene to clean the plastic or rubber parts.
Never use paper towels or window cleaners on the plastic parts.
The use of steam cleaning appliances is extremely dangerous and so is strictly forbidden.
Removing the racks
Before removing racks from the appliance it is necessary to remove all the bottles in the given rack.
Pull the rack out as far as it will go. Press the left safety lever downwards and at the same time push the right
safety lever upwards. Now remove the rack.
EN - 18
08/2013
Copyright © 2013, Fast ČR, a. s.
Power outage
Most power outages are recti ed within a few hours and should not have an e ect on the temperature inside
the appliance if you limit its ventilation. However, in the event of an extended power outage it is necessary
to take appropriate steps to prevent the contents inside the appliance from spoiling.
Taking out of operation for an extended period
If you are not going to use the refrigerator for an extended period of time, do the following:
Disconnect the refrigerator from the power source by pulling it out of the power socket. Clean out the inside
and dry it out as described in the part Cleaning the refrigerator. Leave the door open to prevent an unpleasant
odour forming inside.
Moving
Before moving it, it is necessary to remove all contents from the appliance.
Secure freely moving parts inside the wine cooler (racks), e.g. using adhesive tape.
To prevent damage, screw in the levelling feet.
Secure the door, e.g. using adhesive tape.
Ensure that the appliance always remains in a vertical position while being transported. To prevent
the appliance from damage during transport you can cover it with a blanket or another soft textile.
Energy saving tips
Locate the appliance away from sources of heat and out of direct sunlight.
Ensure su cient ventilation. Under no circumstances should you cover the ventilation openings.
Only open the door when necessary. Do not leave the door open for a long time or open / close the door
too often.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Philco PW 166 D Návod na obsluhu

Kategória
Chladničky
Typ
Návod na obsluhu
Táto príručka je tiež vhodná pre

V iných jazykoch