CS1

iGET CS1 Užívateľská príručka

  • Ahoj! Prečítal som si rýchly návod pre bezpečnostné kamery iGET CS1 Mini, CS6 a CS9. Som pripravený odpovedať na vaše otázky o ich funkciách, nastavení a riešení problémov. Napríklad, viem vám poradiť, ako nastaviť detekciu pohybu, ako nahrávať video na SD kartu alebo ako riešiť problémy s pripojením Wi-Fi.
  • Zariadenie sa nedá správne zobraziť v aplikácii?
    Prečo je kamera po resetovaní stále v zozname zariadení?
    Ako zmením Wi-Fi sieť kamery?
    Zariadenie nerozpoznáva SD kartu?
    Nedostávam upozornenia do telefónu?
1
CS1 / CS6 / CS9
QUICK GUIDE - EN
2
Camera CS1 Mini consult the checklist below for all
components:
Camera Power adapter
USB Cable Manual
Adhesive tape
3
Camera CS6 Consult the checklist below for all
components:
Camera Power adapter
Screw package Manual
Screwdriver
4
Camera CS9 Battery Consult the checklist below for
all components:
Camera Power adapter USB cable
Screw package Bracket (A) Bracket (B)
User manual
5
Power
DC 5V±10%
Status light
Blinking red light: wait for network
connection
Solid blue light on: camera is working
correctly
Solid red light on: camera is
malfunctional
Microphone
Capture sound for your video
SD card slot
Support local microSD card storage
(Max. 128GB)
Reset
Press and hold for 5 seconds with pin
to reset the camera (if you have
modified settings, they will return to
factory defaults
6
Power
DC 12V±10%
Status light
Solid red light on:
The camera is turning on or
malfunctional
Blinking red light:
awaiting Wi-Fi connection
Solid blue light: the camera runs
correctly
Blinking blue light: currently connecting
Microphone
Capture sound for your video
SD card slot
Support local microSD card storage
(Max. 128GB)
Reset
Press and hold for 5 seconds to reset
the camera (if you have modified
settings, they will return to factory
defaults
7
Power
DC 5V±10%
Power on/off
Press the button for 3 seconds to turn
on/off the camera
Status lights
Solid red light on: the camera is turning
on or malfunctional
Blinking red light on: awaiting Wi-Fi
connection (slowly blinking) connecting
the WiFi (quickly blinking)
Blinking blue light: currently connecting
Solid blue light on: the camera runs
correctly
SD card slot
Support local microSD card storage
(Max.128GB)
Reset
Press and hold for 5 seconds to reset
camera
Charging
indicator
- Solid red indicator on: battery is
charging
- Solid blue indicator on: charging
completed
Battery
capacity
9600mAh (two 21700 lithium-ion
batteries)
8
(*) After adjusting your camera angle,
please lock this screw
1) Fix the camera to the wall with screws.
2) Adjust camera angle to a correct view
(as shown in the picture).
9
Download
iGET HOME is available for both iOS and Android
OS. Search the name “iGET HOME”, in App Store or
Google Play, or scan the QR-Code to download the
App.
Google Play IOS Store
Set up router
The router supports the 2.4GHz Wi-Fi (doesn´t
support the 5GHz), and is connected to the Wi-Fi
network. Please set the parameters of the router
before connecting the WiFi network, and record the
SSID and password of your Wi-Fi.
Registration process
10
1) Open the iGET HOME, click “Register”, read the
“Privacy Policy” and click “Agree”.
2) Input a legal and valid Mobile number or Email
address and click “Continue”. Input Verification Code,
then log in the app.
Register Verification Code
11
3) Open the iGET HOME APP click "Armed" >> ”Add
Device” or by clicking on "Device" >> "Add Device".
4) Click "Add Device" or "+", and then select
"Camera" >> choose your model to add camera.
12
5) Power on and reset camera until the status
indicator is flashing quickly or a prompt tone is heard,
and then click "Next". Then input your Wi-Fi's
passwords and click "Next".
Click " " to change network.
Note:
- Camera only supports 2.4GHz Wi-Fi network.
- The number of bits in the SSID and passwords of
the router should not exceed 24 digits.
13
6) In this interface, you should scan the QR code in
your phone with the camera, when the camera comes
out "dong dong". And you can complete the
configuration about 30s.
14
7) When connecting, you should make sure your
router, mobile, and camera are as close as possible.
When camera added successfully, click " "
you could also change the camera's name.
15
In "Security Camera" interface, click " ", you can
set the camera common functions.
16
FAQ Frequently Asked Questions
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can
place the camera close to the router, and if not, it is
recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network
configuration of the camera, but cannot change the
configuration on the App, remove the camera, and
must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and
then configure the device again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power
cut. Confirm whether the SD card is normally
available and the format is FAT32. And the TF card
can’t be identified when the Internet environment is
not good.
Q: Why I can’t get the notifications with my cell phone
App?
A: Please confirm that the App has been running on
the phone, and the relevant reminder function has
been opened; Message notification and authority
confirmation in the mobile phone system have been
opened.
17
Cameras CS1 and CS6:
Video flip
Flip your video stream up or down for maximum
flexibility.
Motion detection
Support smart motion detection. The camera will
detect movements, and then send you push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity
SD storage or Cloud storage.
Day & Night
Never miss a moment, even in complete darkness,
with powerful night-vision technology.
Daytime Night
18
Camera CS9:
Remote wake-up
The camera will be in a sleep mode to save power;
you can have a preview in App.
Full-duplex audio
You can see and hear the vistor in your App from the
camera.
PIR
When the camera detects someone stopping by, it
sends an alarm message to your cell phone.
Low battery alarm
When the battery power is lower than your set, the
App will send a notification to your mobile phone.
Record
Using SD card or opening the Cloud-Storage Service,
to keep recording for every moment.
Day & Night
Powerful night vision means no interruptions, even in
complete darkness
19
VI. Warranty Rules
For household use: The given symbol (crossed-out
wheeled bin) on the product or at accompanying
documents means that used electrical and electronic
products should not disposed of with household waste. To
ensure proper disposal of the product, hand it over to a
designated collection point, where it will be accepted free
of charge. The correct disposal of this product will help to
save valuable natural resources and prevent any potential
negative impacts on the environment and human health,
which could otherwise be caused by inappropriate
disposal of wastes. For more details, please, contact your
local authorities or the nearest collection point. The
improper disposal of this waste can be penalized in
accordance with national regulations. Information for
users to disposal of electrical and electronic devices
(corporate and business use): For proper disposal of
electrical and electronic devices, ask for details from your
dealer or distributor. Information for users to disposal of
electrical and electronic devices in other countries
outside.
EU: The above mentioned symbol (crossed-out
wheeled bin) is valid only in the countries of EU. For
proper disposal of electrical and electronic devices, ask for
details from your authorities or dealer. All is expressed by
the symbol of crossed-out wheeled bin on product,
packaging or in printed materials.
Set up the claim for warranty repair of device at your
dealer. If you have technical questions or problems,
20
contact your dealer. Follow the rules for working with
electrical equipment. The user may not dismantle the
device or replace any part of this. Opening or removing
the covers poses the risk of electric shock. In case of
incorrect reassembly and subsequent connection you are
also exposed to electric shock.
Declaration of Conformity: Company INTELEK.CZ s.r.o.
hereby declares that CS1, CS6, CS9 devices are in
compliance with essential requirements and other
relevant provisions of Directive 2014/53/EU. The full text
of the EU Declaration of Conformity is available on this
website www.iget.eu.
The warranty period of the product is 24 months, unless
stated otherwise.
This device can be used in the following countries bellow.
Italy - The conditions for using the WiFi network are
described in the so-called Electronic Communications
Code
Norway - The 2.4 GHz limitation applies only to the area
20 km from colony of Ny-Ålesund.
RoHS: The components used in the device meet the
requirements on the restriction of hazardous substances
in electrical and electronic devices in accordance with
Directive 2011/65/EU. The RoHS declaration can be
downloaded from www. iget.eu.
Operation of radio equipment:
CZ: This radio equipment can be operated in the Czech
/