Philco PEI 12715 Návod na obsluhu

Kategória
Odsávače pár
Typ
Návod na obsluhu

Táto príručka je tiež vhodná pre

RANGE HOOD
USER'S MANUAL
PEI 12715
PEM 14
PEM 8
Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user's manual.
EN - 1
04/2012Copyright © 2012, Fast ČR, a. s.
CONTENTS
PART 1: IMPORTANT SAFETY INSTRUCTIONS ................................................................................................ 2
PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 4
PART 3: INSTALLATION .................................................................................................................................... 5
Unpacking ..................................................................................................................................................................................................5
Dimensions of the appliance ..............................................................................................................................................................5
Placement ..................................................................................................................................................................................................5
Assembly and installation ....................................................................................................................................................................6
Carbon  lter...............................................................................................................................................................................................8
Ventilation ..................................................................................................................................................................................................8
PART 4: INSTALLATION OF THE EXTERNAL MOTOR UNIT ............................................................................. 9
PEM 14 External motor unit .................................................................................................................................................................9
PEM 8 External motor unit ................................................................................................................................................................ 11
PART 5: OPERATION ...................................................................................................................................... 14
Operating tips ........................................................................................................................................................................................14
PART 6: MAINTENANCE AND CLEANING ...................................................................................................... 15
Changing a light bulb ......................................................................................................................................................................... 15
Cleaning ...................................................................................................................................................................................................15
PART 7: BEFORE YOU CALL THE SERVICE CENTRE ....................................................................................... 17
PART 8: TECHNICAL SPECIFICATIONS ........................................................................................................... 18
EN - 2
04/2012Copyright © 2012, Fast ČR, a. s.
PART 1: IMPORTANT SAFETY INSTRUCTIONS
Recommendation:
Carefully read these instructions before installing and operating this range hood.
Write down the serial number found on the rating label of the range hood in the space below. It is essential that
you store this user's manual in a safe place so that you can use it in the future. If you intend to sell the appliance,
give it to another owner, or if you move, always make sure that the user's manual is attached to the appliance,
so that the new owner can also learn about the operation of the appliance and the relevant warnings.
SERIAL NUMBER:
Important safety instructions
 This appliance is designed for household use only.
 Before connecting the power cord plug, make sure the voltage stated on the rating label of the appliance
corresponds to the voltage in your wall socket. Connect the power cord plug to a power socket with
a voltage of 220 – 240 V ~ 50 Hz.
 Only use a properly grounded power socket. The appliance may only be connected to a properly grounded
power socket.
 All electrical connections must be performed by a quali ed electrician.
 Installation performed by an unquali ed person may cause incorrect operation, damage to the appliance,
create a  re hazard or cause injury to persons.
 Neither the manufacturer nor the vendor take responsibility for damages caused by incorrect or
unprofessional installation, connection or operation. Tampering with the appliance by an unquali ed
person will void the customer's right to a warranty repair.
 Do not expose the power cord to excessive pressure or loads, do not place heavy objects on it, it must
not be tangled and it must not be stepped on. Do not locate the power cord in or on heat sources such
as stoves, heating or other generators of heat. Otherwise this may damage the power cord or create a  re
hazard.
 Only connect the power cord plug to a power socket after the entire installation is completed.
 The power plug serves as a disconnection device and for this reason the power socket must remain easily
accessible for the event of a dangerous situation, unless it is connected into a terminal box.
 Do not touch the lights if the appliance has been running for some time. Lights heat up during operation
and may cause burns.
 This appliance is designed for fume extraction during standard domestic use. Do not use the appliance
for purposes other than those for which it was designed. Otherwise you expose yourself to the risk
of a dangerous situation and voiding the warranty.
 Follow the instructions for installation and ventilation (with the exception of when a  re stove is used).
 Do not use the  ambé cooking method under the range hood.
 Regularly replace the  lters in the range hood. Otherwise this presents a  re hazard.
 Only use  lters suitable for use with the range hood. The manufacturer or distributor will recommend the
suitable  lter type.
 Do not use the appliance without the aluminium  lter inserted. Do not take out the  lters while the
appliance is on.
 Regularly clean the appliance to prevent a dangerous situation from occurring.
 Before cleaning, replacing  lters, moving or any other maintenance, turn o the appliance and pull out the
power plug from the power socket, or turn o the respective circuit breaker.
 If you are using another gas or natural gas appliance in the room at the same time, the fumes from this
appliance must be spatially isolated.
EN - 3
04/2012Copyright © 2012, Fast ČR, a. s.
 If a chimney is connected to the exhaust of the range hood, use pipes with a diameter of 150 or 120 mm.
The pipe connection should be as short as possible.
 Keep packaging materials out of children's reach. They could su er injury or su ocation.
 Children must be supervised to ensure that they do not play with the appliance. If the power cord is
damaged stop using the appliance. Have the power cord replaced at an authorised service centre or by
another quali ed person. Under no circumstances should you replace the power cord yourself.
To ensure safety, use a fuse with a maximum rating of 6 A.
WARNING!
This appliance must not be used by persons (including children) with physical or mental
impairments or by inexperienced persons, unless properly trained or schooled in the safe use
of the appliance, or unless they have been properly supervised by a quali ed person who will be
responsible for their safety.
Attention when transporting or carrying
The packaging materials are from recyclable materials, so dispose of them in an environmentally conscientious
manner according to regulations in force.
During transport adhere to the symbols of the cardboard box.
When carrying the appliance, hold it by the respective handles.
NOTE:
We recommend that you keep the original packaging at least for the duration of the warranty period for
the event of repair or refund and transport to the authorised service centre. Adhere to the symbols on
the cardboard box.
If you do not have the original cardboard box, adhere to the following instructions:
a) Do not place any items on the appliance that could damage the appliance during transport.
b) Protect the appliance against impacts, falls, etc.
c) Wrap the appliance, e.g. in bubble wrap which will protect the appliance from damage.
NOTE:
The carbon  lter is not included.
NOTE:
If the building is equipped with a heat recovery system system, it is necessary to setup the appliance for
internal air circulation (without an exhaust). In that case, it is necessary to purchase the carbon  lter.
EN - 4
04/2012Copyright © 2012, Fast ČR, a. s.
PART 2: DESCRIPTION OF THE APPLIANCE
1. Power cord 4. Function indicator lights
2. Lighting 5. Aluminium lter
3. Protective cover
1.
2.
3.
4.
5.
Remote control
a)
b)
d)
c)
a) Turn the appliance on / o
b) Increase the exhaust power
c) Decrease the exhaust power
d) Turn the lights on / o
EN - 5
04/2012Copyright © 2012, Fast ČR, a. s.
PART 3: INSTALLATION
Unpacking
 After unpacking remove all packaging and advertising labels from the appliance.
 Check that the appliance has not been damaged and that the package includes all the items described in
this user's manual.
 If the appliance was damaged during transport, contact authorised service centre.
 Do not use a damaged appliance under any circumstances.
IMPORTANT:
Ensure that children do not play with the packaging material.
Dimensions of the appliance
Supplied accessories (depending on the model)
A non-return exhaust  ap must be installed into the air outlet of the range hood (unless one is already factory
installed).
Placement
Install the range hood at a height of at least 65 cm above an electric cooktop or at a height of 75 cm above
a gas cooktop.
EN - 6
04/2012Copyright © 2012, Fast ČR, a. s.
Assembly and installation of the appliance
Before assembling and installing the appliance carefully read these instructions and adhere to them.
NOTE:
Dowels, screws and the hanging plate are supplied together with the range hood.
IMPORTANT:
Before installing or using the appliance, please  rst read all instructions and check that the voltage and
frequency values on the rating label correspond to the voltage and frequency in your electricity grid.
We recommend that the appliance be connected by a service technician or another quali ed person in
compliance with local codes and regulations.
Before starting the installation
 Check that the purchased appliance has the correct dimensions corresponding to the chosen installation
location. Furthermore ensure that there is an electrical power socket available that will remain accessible
even after the range hood is installed.
 Before installing the range hood, check that all necessary masonry work is complete.
 Have all electrical connections performed by a quali ed person.
 We recommend that you remove the aluminium  lters before installing the range hood.
 Check that there are no packaging materials or other materials, e.g. user's manual, warranty card or bags
with screws, inside the appliance. These need to be taken out and kept for possible use in the future.
 We recommend that you disconnect and move to the side freely standing or built in stoves so that you
have easier access to the rear wall or ceiling. If this is not possible place protective material on to the work
area, cooktop or stove. This will prevent damaging these surfaces.
 Select an even surface for the necessary assembly of the range hood. Cover the surface with a protective
material and place all parts of the range hood and fastening elements on to it.
 It is necessary that a quali ed technician inspects the suitability of the supplied fastening material and
other components for the speci c wall / ceiling type. The wall / ceiling must be su ciently strong to hold
the weight of the range hood.
 Do not attach this range hood to a wall or cabinet furniture by tiling, plastering and do not glue it on using
silicone glue. The appliance is designed to only be installed on a wall / ceiling.
 We recommend that always two people perform the installation of the appliance.
If your range hood is designed to be mounted to the ceiling, adhere to the following instructions.
1) The range hood must only be suspended on ceiling beams or on load bearing ceiling beam connections.
2) Do not suspend the range hood on false ceilings.
3) The ceiling must have a load bearing capacity of at least 40 kg.
4) The ceiling thickness must be at least 30 mm.
IMPORTANT:
THE RANGE HOOD MAY ONLY BE CONNECTED TO THE ELECTRICAL GRID AFTER THE ENTIRE INSTALLATION
IS COMPLETE.
IMPORTANT:
The range hood can also be used with an external motor unit PEM 14 or PEM 8. You will  nd the
installation instructions in a further part of the user’s manual.
EN - 7
04/2012Copyright © 2012, Fast ČR, a. s.
Installation procedure
1. Open the protective covers and remove the aluminium  lters.
2. Pull out the cable leading from the external ventilation unit and lead it about 30 cm above the range hood.
Cable leading from the external ventilation unit
3. Place the range hood against the ceiling and secure it in place using screws.
4. Attach one end of the aluminium pipe to the range hood  ange and the other end to the air outlet. Check
that both ends are  rmly attached and secured in place. Bends and deviations in the aluminium  ue pipe
reduce the exhaust performance, so it is essential that the pipe is bent as little as possible.
EN - 8
04/2012Copyright © 2012, Fast ČR, a. s.
Right Wrong
Carbon  lter
If you are using the range hood without an air exhaust, it is necessary to use a carbon  lter. The carbon  lter is
not included. Contact your vendor or an authorised service centre to purchase this  lter.
 Before installing or replacing the carbon  lter, check that the appliance is turned o and disconnected
from the power socket or that the respective circuit breaker is turned o .
 It is necessary to replace the carbon  lter regularly every 3 – 5 months depending on how much the
appliance is used.
 Never wash the carbon  lter in water unless the manufacturer states otherwise.
 Aluminium  lters must always be installed even when the carbon  lter is not installed. Do not use the
appliance without the aluminium  lter installed.
Replacing the carbon  lter
1. For the correct operation of the appliance it is necessary to install a carbon  lter. The number and type
depends on the model.
2. Place the carbon  lter on the motor outlets and turn it in the clockwise direction.
3. To remove the carbon  lter turn it in the anticlockwise direction.
Ventilation
To ensure proper ventilation, leave windows closed while the appliance is turned on.
WARNING!
Pay increased attention if you are using the appliance together with another appliance that uses
air or fuel for its operation (e.g. heating fan, fan, etc.) or that uses gas, coal or wood, as its operation
may negatively a ect the performance of the range hood because it expels air out of the room.
This warning does not apply if you installed the appliance without an exhaust out of the room.
EN - 9
04/2012Copyright © 2012, Fast ČR, a. s.
PART 4: INSTALLATION OF THE EXTERNAL MOTOR UNIT
PEM 14 External motor unit
1. Installation of hanging brackets
To hang the external motor unit it is necessary to  rst install 2 L-shaped hanging brackets, which are
supplied together with the screws. Screw M5x40 screws into the M5 thread on the motor unit base.
2. Drilling mounting holes
Drill 8mm holes (A, B) in the installation location of the external motor unit and insert ø10mm dowels into
them.
3. Inserting screws
Into the holes with the dowels (A, B) screw in screws 5.5 x 60. Leave a gap of 5 mm between the screw
heads and the wall.
Install the non-return exhaust  ap on to the top part of the motor unit using 3.5 x 9.5 screws.
EN - 10
04/2012Copyright © 2012, Fast ČR, a. s.
4. Hanging the external motor unit
Hang the motor unit using the hanging brackets on to the screws in holes A and B.
Installation of aluminium tubes
1. Connecting the range hood to the external motor unit
Connect the  exible aluminium tube to the air outlet in the top part of the range hood.
Insert the other end into the air inlet of the external motor unit.
2. Connecting the external motor unit to a chimney
Place one end of the aluminium tube on to the air outlet of the external motor unit.
Place the other end of this tube on to the outlet in the respective part of the chimney.
NOTE:
To prevent the aluminium tube from coming loose when at the maximum exhaust power level, you can
use supports to strengthen the tube structure.
EN - 11
04/2012Copyright © 2012, Fast ČR, a. s.
Cable connection
After completing the entire installation and connecting the tubes you can connect the cables of the external
motor unit to the range hood. Connect the cables according to the pictures below.
Cable of the
range hood
Cable of the external
motor unit
PEM 8 External motor unit
1. Installation of hanging brackets
To hang the external motor unit it is necessary to  rst install 2 L-shaped hanging brackets, which are
supplied together with the screws. Screw M5x40 screws into the M5 thread on the motor unit base.
2. Drilling mounting holes
Drill 8mm holes (A, B) in the installation location of the external motor unit and insert ø10mm dowels into
them.
3. Inserting screws
Into the holes with the dowels (A, B) screw in screws 5.5 x 60. Leave a gap of 5 mm between the screw
heads and the wall.
EN - 12
04/2012Copyright © 2012, Fast ČR, a. s.
Install the non-return exhaust  ap on to the top part of the motor unit using 3.5 x 9.5 screws.
4. Hanging the external motor unit
Hang the motor unit using the hanging brackets on to the screws in holes A and B.
Installation of aluminium tubes
1. Connecting the range hood to the external motor unit
Connect the  exible aluminium tube to the air outlet in the top part of the range hood.
Insert the other end into the air inlet of the external motor unit.
2. Connecting the external motor unit to a chimney
Place one end of the aluminium tube on to the air outlet of the external motor unit.
Place the other end of this tube on to the outlet in the respective part of the chimney.
EN - 13
04/2012Copyright © 2012, Fast ČR, a. s.
NOTE:
To prevent the aluminium tube from coming loose when at the maximum exhaust power level, you can
use supports to strengthen the tube structure.
Cable connection
After completing the entire installation and connecting the tubes you can connect the cables of the external
motor unit to the range hood. Connect the cables according to the pictures below.
Cable of the
range hood
Cable of the external
motor unit
Simpli ed connection diagram
EN - 14
04/2012Copyright © 2012, Fast ČR, a. s.
PART 5: OPERATION
Remove the protective foil from the control panel.
The range hood is controlled only by means of a remote control.
buttonThis button serves to turn the range hood on / o . When it is pressed the range hood motor starts
running at 1 (lowest power). An LED indicator light (on the far left side) will light up on the range hood. If you
increase the exhaust power level to 2 then two LED indicators will be lit, etc.
– button - This button serves to reduce the exhaust power level. Each time it is pressed the exhaust power level
will decrease by 1 level. The lowest level is 1.
+ button - This button serves to increase the exhaust power level. Each time it is pressed the exhaust power
level will increase by 1 level. The highest level is 4.
Timer
Press and hold the – button for at least 2 seconds and the timer function will be turned on for a period
of 15 minutes. The LED indicator light on the far right will be lit. The motor will automatically turn o after
15 minutes or if you change the exhaust power level.
NOTE:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend to
leave the range hood running a few minutes longer than the stove to ensure that all odours are extracted.
Lighting
The range hood is equipped with 3 groups lights.
1. Group: press the
button, while the lights are o and the 2 middle lights will turn on.
2. Group: press the button again, the 2 middle lights will turn o and 4 lights on the sides will turn on.
3. Group: press the button once more and all the lights will turn on.
If you press the button again the lights will turn o .
NOTE:
If you do not perform any operation within 4 hours, the range hood will turn o automatically.
Operating tips
1. Regularly clean the aluminium  lters and regularly replace the carbon  lters.
2. Use the medium exhaust power level. Only use the highest power level when necessary.
3. To ensure proper ventilation, leave windows closed while the appliance is turned on.
EN - 15
04/2012Copyright © 2012, Fast ČR, a. s.
PART 6: MAINTENANCE AND CLEANING
WARNING!
Before cleaning, regular or other maintenance, installation or removal, check that the appliance is
turned o and disconnected from the power socket or that the respective circuit breaker is turned
o .
Changing a light bulb
 Turn o the appliance.
 Take out the aluminium  lter.
 If the light bulb broke during operation wait until it cools down.
 To remove the halogen light bulb (50 W), press the light bulb holder downwards and gently turn
it anticlockwise. Remove the light bulb.
 Install a light bulb with the same parameters in reverse sequence.
Cleaning
 Aluminium  lters capture dust and fat from the extracted air.
 It is necessary to regularly wash these  lters, ideally once a month, depending on the level of use. Wash the
lters in water with dishwashing detergent, or you may place the  lters in a dishwasher and wash them
using a gentle program (max. 60°C).
 Take out the aluminium  lters by pressing the clip.
 After cleaning allow the aluminium  lters to dry thoroughly before reinstalling them.
 Wipe the outer surface of the range hood with a clean damp wiping cloth lightly dipped in water with
a small amount of dishwashing detergent. Then wipe dry.
 Avoid electrical parts coming into contact with water or another liquid.
EN - 16
04/2012Copyright © 2012, Fast ČR, a. s.
WARNING!
For cleaning do not use petrol, benzene, thinners or any other solvents, coarse cleaning agents,
steel wool or any sponges with steel wool.
WARNING!
You may put the aluminium  lters in a dishwasher. The colour of the aluminium  lters may change
after several washes. This is a normal event.
EN - 17
04/2012Copyright © 2012, Fast ČR, a. s.
PART 7: BEFORE YOU CALL THE SERVICE CENTRE
If the appliance is not working as it should check the following recommendations for resolving the most
common problems.
If the problem persists or it is not included in the table below, turn o the appliance and disconnect it from the
power socket and contact an authorised service centre.
Problem Solution
The range hood is not working. Check that the power plug is properly inserted in a properly
grounded power socket with the parameters 220 – 240 V ~ 50 Hz.
Check if you have pressed the
button.
The lights are not working. Check that the power plug is properly inserted in a properly
grounded power socket with the parameters 220 – 240 V ~ 50 Hz.
Check if you have pressed the
button.
Check whether the light bulb or  uorescent tube is broken.
Exhaust power is weak. Check whether the aluminium  lters are dirty.
Check the air outlet, it should be open.
Check whether the carbon  lter is not too dirty.
The range hood does not extract the
air directly out (for models without
an exhaust).
Check whether the aluminium  lters are dirty.
Check whether the carbon  lter is not too dirty.
Attention:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend to leave
the range hood running a few minutes longer than the stove to ensure that all odours are extracted.
EN - 18
04/2012Copyright © 2012, Fast ČR, a. s.
PART 8: TECHNICAL SPECIFICATIONS
Input voltage 220 V ~ 50 Hz
Air outlet diameter 120 mm
NOTE:
All the here mentioned data is subject to change.
1 / 1

Philco PEI 12715 Návod na obsluhu

Kategória
Odsávače pár
Typ
Návod na obsluhu
Táto príručka je tiež vhodná pre

V iných jazykoch