Sony KV-32FQ70K Návod na obsluhu

Kategória
Televízory LCD
Typ
Návod na obsluhu
R
FD Trinitron
Colour Television
KV-32FQ70K
© 2003 by Sony Corporation
Instruction Manual
GB
Инструкции за експлоатация
BG
Návod k obsluze
Kezelési útmutató
Instrukcja obsługi
Инструкция пo эксплyатации
CZ
HU
PL
RU
4-093-901-71 (1)
00CoverKV28/32FQ70K.fm Page 1 Wednesday, January 15, 2003 7:37 PM
05B.cover.fm Page 1 Tuesday, January 14, 2003 3:21 PM
3
GB
Introduction
Thank you for choosing this Sony FD Trinitron Colour Television.
Before operating the TV, please read this manual thoroughly and retain it for future
reference.
Symbols used in the manual:
Table of Contents
Introduction ..............................................................................................................................................3
Safety Information ...................................................................................................................................4
Overview
Overview of Remote Control Buttons...................................................................................................5
Overview of TV Buttons ........................................................................................................................6
Installation
Inserting Batteries into the Remote Control.........................................................................................6
Connecting the Aerial and VCR ...........................................................................................................6
First Time Operation
Switching On the TV and Automatically Tuning ..............................................................................7
Menu system
Introducing and Using the Menu System ............................................................................................9
Menu Guide:
Picture Adjustment..............................................................................................................................9
Sound Adjustment .............................................................................................................................10
Sleep Timer .........................................................................................................................................11
Auto Format........................................................................................................................................11
AV3 Output.........................................................................................................................................12
PIP Input..............................................................................................................................................12
PIP Position.........................................................................................................................................13
Language.............................................................................................................................................13
Auto Tuning........................................................................................................................................13
Programme Sorting............................................................................................................................14
Programme Labels .............................................................................................................................14
AV Preset.............................................................................................................................................14
Manual Programme Preset ...............................................................................................................15
Picture Rotation..................................................................................................................................16
RGB Centring......................................................................................................................................16
Teletext
...............................................................................................................................................17
NexTView
...........................................................................................................................................18
Additional Information
Connecting Optional Equipment.........................................................................................................20
Using Optional Equipment...................................................................................................................21
Remote Control Configuration for VCR/DVD .................................................................................22
Specifications ..........................................................................................................................................23
Troubleshooting .....................................................................................................................................24
Table of Contents
Important information
Information on a feature.
1,2...
Sequence of instructions.
Shaded buttons on the remote control show
you the buttons you have to press to follow
the sequence of the instructions.
Informs you of the result of instructions.
01GBKV28/32FQ70K.fm Page 3 Wednesday, January 15, 2003 7:38 PM
4
Safety Information
Do not open the cabinet and the rear
cover of the TV. Refer to qualified
service personnel only.
To prevent fire or shock
hazard, do not expose the TV
to rain or moisture.
For your own safety, do not touch
any part of the TV, power lead or
aerial lead during lightning
storms.
Do not cover the ventilation
openings of the TV For
ventilation, leave a space of at
least 10cm all around the set.
Never place the TV in hot, humid
or excessively dusty places. Do
not install the TV where it may be
exposed to mechanical vibrations.
To prevent fire, keep inflammable
objects or naked lights (eg
candles) away from the TV.
Clean the screen and cabinet with a
soft, lightly dampened cloth. Do
not use any type of abrasive pad,
alkaline cleaner, scouring powder
or solvent, such as alcohol or
benzine, or antistatic spray. As a
safety precaution, unplug the TV
before cleaning it.
Pull out the power lead by the
plug. Do not pull on the power
lead itself.
Take care not to place heavy
objects on the power lead as this
could result in damage.
We recommend you wind any
excess lead around the holders
provided on the rear of the TV.
Place the TV on a secure stable
stand. Do not allow children to
climb on to it. Do not place the TV
on its side or face up.
Do not cover the ventilation
openings of the TV with items
such as curtains or newspapers
etc.
Safety Information
Never push objects of any kind into
the set as this could result in a fire
or electric shock. Never spill liquid
of any kind on the set. If any liquid
or solid object does fall into the
cabinet, do not operate the TV.
Have it checked immediately by
qualified personnel.
For environmental and safety
reasons, it is recommended that
the TV set is not left in standby
mode when not in use. Disconnect
from the mains.
This set is to operate on a 220-
240V AC supply only. Take care
not to connect too many
appliances to the same power
socket as this could result in fire
or electric shock.
Unplug the power lead before
moving the TV. Avoid uneven
surfaces, quick steps or excessive
force. If the set has been dropped
or damaged, have it checked
immediately by qualified service
personnel.
01GBKV28/32FQ70K.fm Page 4 Wednesday, January 15, 2003 7:38 PM
5
GB
1
To Temporarily Switch Off TV:
Press this button to temporarily switch off TV (the standby indicator on
the TV lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being
pressed, the TV switches automatically into standby mode.
2
VCR or DVD on/off:
Press this button to switch your VCR or DVD on or off.
3
Media Selector:
With this remote control you can operate not only this TV but also the main
functions of your VCR or DVD. Switch on the device you want to operate and
next press this button repeatedly to select the VCR, TV or DVD. A green
light will be momentarily lit to indicate the chosen function.
Before the first time you want to control a DVD or VCR by using this
remote control, you have to set it up depending on the brand of the
device to be used. For more details, refer to chapter “Remote Control
Configuration for VCR or DVD” on page 22.
4
Selecting input source:
Press this button repeatedly until the desired
input symbol of the source appears on the TV screen.
5
Selecting channels:
If Media Selector is switched to TV or VCR, press this button to select
channels.
For double-digit programme numbers, enter the second digit within 2.5
seconds.
6
a) If Media Selector is switched to TV:
Press this button to watch the last channel selected (the last channel
watched for at least 5 seconds).
b) If Media Selector is switched to VCR:
For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- -
first and then the buttons 2 and 3.
Overview of Remote Control Buttons
Overview
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operation. For more details, please refer to “Teletext” section on page 17.
1
!™
2
3
4
5
6
7
8
9
!∞
@™
!•
7
Selecting screen format:
Press this button
repeatedly to change the format of the screen. For
more details refer to chapter “Auto Format” on
page 11.
8
This button only works in Teletext mode.
9
Selecting Teletext:
Press this button to switch
on teletext.
Joystick:
a) If Media Selector is switched to TV:
When MENU is switched on, use these buttons
to operate the menu system. For details refer to
“Introducing and Using the Menu System” on
page 9.
When MENU is switched off, press OK to
show a channel overview. Then press or
to select the channel and then press again
the OK button to watch the selected channel.
b)If Media Selector is switched to VCR or
DVD:
Using these buttons you can control the main
functions of your VCR or DVD.
Displaying the menu system:
Press this
button to display the menu on the TV screen.
Press again to remove the menu display from the
TV screen.
!™
Selecting channels:
Press these buttons to
select the next or previous broadcast channel.
NexTView:
For more details refer to chapter
“NexTView” on page 18.
Adjusting TV volume:
Press these buttons to
adjust the volume of the TV.
!∞
Recording button:
If Media Selector is
switched to VCR, press this button to record
programmes.
Selecting TV mode:
Press this button to switch
off PIP, teletext or video input.
Selecting Picture mode:
Press this button
repeatedly to change the picture mode.
!•
Selecting Sound effect:
Press this button
repeatedly to change the sound effect.
Displaying on Screen information:
Press
this button to display all on-screen indications.
Press again to cancel.
Freezing the picture:
Press this button to
freeze the picture. The screen is divided into two
screens. On the left with the normal picture, on
the right the picture is freezed. Press this button
again to return to the normal picture.
Swapping screens:
Whilst you are in “PIP”
mode, press this button to swap the two screens.
@™
PIP (Picture in Picture):
Press this button to
watch another source in a small picture (PIP)
within the main TV picture. Press again to cancel.
To select the source you want to watch, refer to
the chapter “PIP Input” on page 12.
Muting the Sound:
Press this button to mute
TV sound. Press again to restore the sound.
01GBKV28/32FQ70K.fm Page 5 Wednesday, January 15, 2003 7:38 PM
6
Overview of TV Buttons
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Connecting the Aerial and VCR
Overview-Installation
Connecting cables are not supplied.
Audio Input
jacks
Selecting
Input source
Video Input jack
Auto Start Up Button
Volume
control
buttons
Programme
Up or Down
Buttons
(Selects TV
channels)
S video
Input jack
Standby indicator
On/Off Switch
Headphones
jack
Press on the mark .
or
VCR
OUT IN
For more details of VCR connection, please refer to the section “Connecting Optional
Equipment” of this instruction manual (see page 20).
Scart lead is optional.
01GBKV28/32FQ70K.fm Page 6 Wednesday, January 15, 2003 7:38 PM
7
GB
Language
English
Norge
Français
Italiano
Nederlands
Select Language: Confirm: OK
Country
Sverige
Norge
-
Italia
Schweiz/Suisse/Svizzera
Select Language: Confirm: OK
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
Select: Confirm: OK
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV
enabling you to: 1) choose the language of the menu screen, 2) choose the country in which
you wish to operate the TV, 3) adjust the picture slant, 4) search and store all available
channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast)
appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by
selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up
Button on the TV set.
First Time Operation
1
Connect the TV plug to the mains socket (220-240V AC,
50Hz)
The first time that the TV set is connected, it is usually
turned on. If the TV is off, press the on/off button on
the TV set to turn on the TV.
The first time you switch on the TV, a
Language
menu
displays automatically on the TV screen.
2
Press the or button on the remote control to select
the language, then press the
OK
button to confirm your
selection. From now on all the menus will appear in the
selected language.
3
The
Country
menu appears automatically on the TV
screen. Press the or button to select the country in
which you will operate the TV set, then press the
OK
button to confirm your selection.
• If the country in which you want to use the TV set
does not appear in the list, select “-” instead of a
country.
• To avoid wrong teletext characters for cyrillic
languages we recommend selecting Russia
country if your own country does not appear in
the list.
4
Because of the earth’s magnetism, the picture might slant.
The
Picture Rotation
menu allows you to correct the
picture slant if it is necessary.
a)
If it is not necessary, press
OK
to select
Not necessary
.
b)
If it is necessary, press or to select
Adjust now
,
then press
OK
and correct any slant of the picture be-
tween –5 and +5 by pressing or . Finally press
OK
to store.
continued...
01GBKV28/32FQ70K.fm Page 7 Wednesday, January 15, 2003 7:38 PM
8
Programme:
Channel:
System
Searching...
1
C 01
B/G
Auto Tuning
Do you want to start
automatic tuning?
Yes
No
No channel found
Please connect aerial
Confirm
Programme Sorting
Programme:
01 TVE2 41 TVE
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select new position Move: OK
MENU
Programme Sorting
Programme:
01 TVE2
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select Channel Confirm:
First Time Operation
5 The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
6The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please be
patient and do not press any buttons, otherwise
automatic tuning will not be completed.
In some countries the TV Broadcaster installs the
channels automatically (ACI system). In this case,
the TV Broadcaster sends a menu in which you can
select your city by pressing the or button and
OK to store the channels.
If no channels were found during the auto tuning
process then a new menu appears automatically on
the screen asking you to connect the aerial. Please
connect the aerial (see page 6) and press OK. The
auto tuning process will start again.
7 After all available channels are captured and stored,
the Programme Sorting menu automatically appears
on the screen enabling you to change the order in
which the channels appear on the screen.
a) If you wish to keep the broadcast channels in the
tuned order, go to step 8.
b) If you wish to store the channels in a different order:
1 Press the or button to select the programme
number with the channel (TV Broadcast) you wish
to rearrange, then press the button.
2 Press the or button to select the new
programme number position for your selected
channel (TV Broadcast), then press OK.
3 Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
8 Press the MENU button to remove the menu from the
screen.
Your TV is now ready for use
01GBKV28/32FQ70K.fm Page 8 Wednesday, January 15, 2003 7:38 PM
9
GB
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the
following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on
2 • To highlight the desired menu or option, press or .
• To enter the selected menu or option, press .
• To return to the last menu or option, press .
• To alter the settings of your selected option, press //or.
• To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen.
continued...
Menu Guide
PICTURE ADJUSTMENT
The “Picture Adjustment” menu allows you to
alter the picture adjustments.
To do this: after selecting the item you want to
alter press , then press / / or
repeatedly to adjust it and finally press OK to
store the new adjustment.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Picture Adjustment
Select: Enter:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
This menu also allows you to customise the picture mode based on the programme you are watching:
Picture Mode Live (for live broadcast programmes, DVD and Digital Set Top Box
receivers).
Personal (for individual settings).
Movie (for films).
Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.
Hue is only available for NTSC colour signal (e.g: USA video tapes).
Select Reset and press OK to reset the picture to the factory preset levels.
The Noise Reduction option is set to AUTO to automatically reduce the picture noise visible in
the broadcast signal. To cancel this function, select “Off” instead of “AUTO”.
MENU
MENU
Menu System
01GBKV28/32FQ70K.fm Page 9 Wednesday, January 15, 2003 7:38 PM
10
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Sound Adjustment
Select: Enter Menu:
Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Natural
Off
Stereo
On
Sound Adjustment
Select: Enter:
Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Natural
Off
Stereo
On
SOUND ADJUSTMENT
The “Sound Adjustment” menu allows you to
alter the sound adjustments.
To do this: after selecting the item you want to
alter, press . Then press / / or
repeatedly to adjust it and finally press OK to
store the new adjustment.
Level 1 Level 2 Level 3 / Function
Effect Natural: Enhances clarity, detail and presence of sound by using
“BBE High Definition Sound system”*.
Dynamic: “BBE High Definition Sound system”* intensifies clarity
and presence of sound for better intelligibility
and musical realism.
Dolby
**V: Dolby Virtual, simulates the sound effect of “Dolby
Surround Pro Logic”.
Off: Flat response.
Treble Less More
Bass Less More
Balance Left Right
Reset Resets the sound to the factory preset levels.
Dual Sound For a stereo broadcast:
Mono.
Stereo.
For a bilingual broadcast:
Mono (for mono channel if available).
A (for channel 1).
B (for channel 2).
Auto Volume Off: volume level changes according to the broadcast signal.
On: volume level of the channels will stay the same, independent of
the broadcast signal (e.g. in the case of advertisements).
TV Speakers On: to listen to the TV from the set speakers.
Off: to listen to the TV from an external amplifier connected to the
audio outputs on the rear of the TV set.
If you are listening to the TV through headphones, the “Effect” option will automatically be
switched to “Off”.
If you select “Dolby Virtual” on the “Effect” option, the “Auto Volume” option will
automatically be switched to “Off” and vice versa.
* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license
from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word
“BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
**This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound
of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded.
The sound effect can also be improved by connecting a suitable external amplifier (for details refer
to “Connecting to external audio Equipment” on page 21).
**Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D
symbol are trademarks of Dolby Laboratories.
K
continued...
Menu System
01GBKV28/32FQ70K.fm Page 10 Wednesday, January 15, 2003 7:38 PM
11
GB
SLEEP TIMER
The “Sleep Timer” option in the “Features”
menu allows you to select a time period for the
TV to switch itself automatically into the
standby mode.
To do this: after selecting the option press ,
then press or to set the time period delay
(max. of 4 hours).
While watching the TV, you can press the button on the remote control to display the time
remaining.
One minute before the TV switches itself into standby mode, the time remaining is displayed on
the TV screen automatically.
AUTO FORMAT
The “Auto Format” option in the “Features”
menu allows you to automatically change the
aspect ratio of the screen.
To do this: after selecting the option, press .
Then press or to select On (if you wish
the TV set to automatically switch the screen
format according to the broadcast signal) or Off
(if you wish to keep your preference). Finally
press OK to store.
Even if you have selected “On” or “Off” in the “Auto Format” option,
you can always modify the format of the screen by pressing
repeatedly on the remote control to select one of the following formats:
Smart: Imitation of wide screen effect for 4:3 broadcast.
4:3: Conventional 4:3 picture size, full picture information.
14:9: Compromise between 4:3 and 16:9 picture size.
Zoom: Widescreen format for letterbox movies.
Wide: For 16:9 broadcast. Full picture information.
In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of
the screen are cut off. Press or to adjust the position of the
image on the screen (e.g. to read subtitles).
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Select: Enter Menu:
Off
On
AUTO
AV1
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Select: Enter:
Off
On
AUTO
AV1
continued...
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Select: Enter Menu:
Off
On
AUTO
AV1
Select: Enter:
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Off
On
AUTO
AV1
4:3
Zoom
14:9
Wide
Smart
Menu System
01GBKV28/32FQ70K.fm Page 11 Wednesday, January 15, 2003 7:38 PM
12
AV3 OUTPUT
The “AV3 Output” option in the “Features”
menu allows you to select the source to be
output from the Scart connector 3/ 3 so
that you can record from this Scart any signal
coming from the TV or from an external
equipment connected to the Scart connectors
1/ 1 or 2/ 2 or front
connectors 4 or 4 and 4.
If your VCR supports SmartLink, this
procedure is not necessary.
To do this: after selecting the option, press .
Then press or to select the desired
output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
If you select “AUTO”, the output signal will always be the same one that is displayed on
the screen.
If you have connected a decoder to the Scart 3/ 3 or to a VCR connected to this
Scart, please remember to change back the “AV3 Output” to “AUTO” or “TV” for correct
unscrambling.
PIP INPUT
The “PIP Input” option in the “Features” menu
allows you to select the source you want to
watch in the “PIP” screen.
To do this: after selecting the option, press .
Then press repeatedly or to select the
desired source AV1, AV2, AV3, AV4 or TV.
Finally press OK to store.
S
S
S
Level 1 Level 2 Level 3 / Function
continued...
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Select: Enter Menu:
Off
On
AUTO
AV1
Select: Enter:
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Off
On
AUTO
AV1
B
A
A
BB
B
A
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Select: Enter Menu:
Off
On
AUTO
AV1
Select: Enter:
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Off
On
AUTO
AV1
To watch the “PIP” screen with the selected
source, press the button on the remote control.
You can swap the screens by pressing the
button on the remote control.
Menu System
01GBKV28/32FQ70K.fm Page 12 Wednesday, January 15, 2003 7:38 PM
13
GB
continued...
PIP POSITION
The “PIP Position” option in the “Features”
menu allows you to change the position of the
“PIP” screen within the main screen.
To do this: after selecting the option press , ,
or to select the desired position. Finally
press OK to store.
LANGUAGE/COUNTRY
The “Language/Country” option in the “Set
Up” menu allows you to select the language
that the menus are displayed in. It also allows
you to select the country in which you wish to
operate the TV set.
To do this: after selecting the option, press
and then proceed in the same way as in steps 2
and 3 of the section “Switching On the TV and
Automatically Tuning” on page 7.
AUTO TUNING
The “Auto Tuning” option in the “Set Up”
menu allows you to automatically search for
and store all available TV channels.
To do this: after selecting the option, press
and then proceed in the same way as in the
steps 5 and 6 of the section “Switching On the
TV and Automatically Tuning” on page 8.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Select: Enter Menu:
Off
On
AUTO
AV1
Select: Enter:
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
Off
On
AUTO
AV1
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Enter:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Start Auto Tuning:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Menu System
01GBKV28/32FQ70K.fm Page 13 Wednesday, January 15, 2003 7:38 PM
14
continued...
PROGRAMME SORTING
The “Programme Sorting” option in the “Set
Up” menu allows you to change the order in
which the channels (TV Broadcast) appear on
the screen.
To do this: after selecting the option, press
and then proceed in the same way as in step 7 b)
of the section “Switching On the TV and
Automatically Tuning” on page 8.
PROGRAMME LABELS
The “Programme Labels” option in the “Set
Up” menu allows you to name a channel using
up to five characters (letters or numbers).
To do this:
1 After selecting the option, press , then
press or to select the programme
number with the channel you wish to name.
2 Press . With the first element of the Label
column highlighted, press or to select
a letter or number (select “-“ for a blank), then
press to confirm this character. Select the
other four characters in the same way. Finally
press OK to store.
AV PRESET
The “AV Preset” option in the “Set Up” menu
allows you to designate a name to the external
equipment you have connected to the input
sockets of this TV.
To do this:
1 After selecting the option, press , then
press or to select the input source you
wish to name (AV1, AV2 and AV3 are for the
rear Scarts and AV4 for side connectors).
Then press .
2 A label automatically appears in the label
column:
a) If you want to use one of the 6 predefined
label (CABLE, GAME, CAM, DVD,
VIDEO or SAT), press or to select
the desired label and finally press OK to
store.
b) If you want to set a different label, select
Edit and press . Then with the first
element highlighted, press or to
select a letter, number or “-“ for a blank,
then press to confirm this character.
Select the other four characters in the same
way and finally press OK to store.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Enter:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Enter:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Enter:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Menu System
01GBKV28/32FQ70K.fm Page 14 Wednesday, January 15, 2003 7:38 PM
15
GB
continued...
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a) Preset channels or the VCR channel one by
one to the programme order of your choice.
To do this:
1 After selecting the ”Manual Programme
Preset” option, press then with
Programme option highlighted press .
Press or to select which programme
number you want to preset the channel on
(for VCR, select programme number “0”).
Then press .
2 The following option is only available depending on the country you have selected
in the “Language/Country” menu.
After selecting the System option, press .
Then press or to select the TV Broadcast system (B/G for western European
countries or D/K for eastern European countries). Then press .
3 After selecting the Channel option, press . Then press the number buttons to enter
directly the channel number of the TV Broadcast or the channel of the VCR signal. If you
do not know the channel number, press or to search for it. When you have tuned
the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press . Next press or to
select a letter, number or “-“ for a blank. Press to confirm this character. Select the other
four characters in the same way. After selecting all the characters, press OK twice to store.
c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the
best possible picture, however you can manually fine tune the TV to obtain a better picture
reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press . Next press or to adjust the fine tuning between -15 and +15.
Finally press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/-
buttons.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number you want to skip. When the programme you want to skip
appears on the screen, select the Skip option and press . Next press or to select
Yes. Finally press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e) View and record scrambled channels when using a decoder connected to Scart
3/ 3 directly or through a VCR.
This option is only available depending on the country you have selected in the
“Language/Country” menu.
To do this: select the Decoder option and press . Next press or to select On. Finally
press OK twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
S
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Enter:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Menu System
01GBKV28/32FQ70K.fm Page 15 Wednesday, January 15, 2003 7:38 PM
16
PICTURE ROTATION
Because of the earth’s magnetism, the picture
may slant. If this is the case, you can correct the
pictures slant by using the “Picture
Rotation” option in the “Detail Set Up” menu.
To do this: after selecting the option, press .
Then press or to correct any slant of the
picture between -5 and +5.
RGB CENTRING
When connecting an RGB source, such as a
“PlayStation”, you may need to readjust the
horizontal position of the picture. If this is the
case, you can adjust it through the “RGB
Centring” option in the “Detail Set Up”.
To do this: while watching an RGB source select
the “RGB Centring” option and press . Then
press or to adjust the centre of the
picture between –10 and +10. Finally press OK
to confirm and store.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Enter:
Detail Set Up
Select:
Picture Rotation
RGB Centring
0
0
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Select:
Enter Menu:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Enter:
Detail Set Up
Select:
Picture Rotation
RGB Centring
0
0
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Select:
Enter Menu:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Menu System
01GBKV28/32FQ70K.fm Page 16 Wednesday, January 15, 2003 7:38 PM
17
GB
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the
teletext service (usually page 100) gives you information on how to use the service. To
operate teletext, use the remote control buttons as indicated below.
Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
To switch on Teletext :
After selecting the TV channel which carries the teletext service you wish
to view, press .
To select a Teletext page:
Input 3 digits for the page number, using the numbered buttons.
If you make a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because the page is not available. If this is the
case, input another page number
To access the next or preceding page:
Press PROG + ( ) or PROG - ().
To superimpose teletext on to the TV:
Whilst you are viewing teletext, press . Press it again to cancel teletext mode.
To freeze a teletext page:
Press / . Press it again to cancel the freeze.
To reveal concealed information (e.g: answer to a quiz):
Press / . Press it again to conceal the information.
To select a sub page:
A teletext page may consist of several sub pages. In this case the page number that appears
on the upper left corner will change from white to green and one or more arrows will appear
next to the page number. Repeatedly press the or buttons on the remote control to
watch the desired sub page.
To Switch Off Teletext:
Press .
Fastext
Fastext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
the bottom of the teletext page. Press the appropriate coloured button (red, green, yellow
or blue) to access the page corresponding to your menu choice.
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
Teletext
01GBKV28/32FQ70K.fm Page 17 Wednesday, January 15, 2003 7:38 PM
18
NexTView*
*(depending on availability of service).
NexTView is an on-screen electronic programme guide, providing you with programme
information for different broadcasters.
When looking for information you can search by theme (sports, art, etc...) or date.
If wrong characters appear when viewing NexTView, use the menu system to enter the
“Language/Country” menu (see page 13) and select the same language as the NexTView
is broadcasted.
Displaying NexTView
1 Select a broadcast channel providing a NexTView service. In this case the indication
“NexTView” is displayed as soon as data is available.
2 To see NexTView service you have two different types of NexTView interface. These depend
on the % of available data:
a) “Programme List” interface:
Whilst you are watching TV, and after the indication “NexTView” (coloured white)
is displayed on the screen, press the button on the remote control to watch the
“Programme List” interface (see fig. 1).
b) “Overview” interface:
Whilst you are watching TV, and after more than 50% of NexTView data is available
(100% data may not be available depending on the area) the indication “NexTView”
(coloured black) is displayed on the screen. Press the button on the remote
control to watch the “Overview” interface (see fig. 2).
As soon as you enter the NexTView service the % of NexTView data available will be
shown in the bottom left corner of the screen. Once you have entered the service, the %
of data will not increase.
3 To navigate through NexTView:
• moving right or left press or .
• moving upwards or downwards, press or .
• to confirm a selection, press OK.
4 To switch NexTView off, press the button on the remote control.
continued...
NexTView
01GBKV28/32FQ70K.fm Page 18 Wednesday, January 15, 2003 7:38 PM
19
GB
NexTView
“Programme List” interface (fig. 1): “Overview” interface (fig. 2):
Icons’ key:
1 Icons for different themes
(see the “Icons’ key”
below)
4 Record*
This function only works if you have connected
a VCR which supports SmartLink and Timer
Programming feature.
If you wish to record the selected programme,
press the red button on the remote control.
2 Date
3 Programme list
5 Remind*
If you wish to be reminded when the selected
programme is broadcast, press the green button on the
remote control. At the time that programme should be
broadcast a reminder message is displayed on the TV.
* “Record” and “Remind” options will be shown on the screen as soon as a programme
have been selected, but they will not be shown if you are watching the NexTView service
on a TV channel which is not a NexTView provider.
* “Record” and “Remind” will not be available if the programme that you have selected
has already started.
full selection list:
All the programme information is
listed by time and broadcast
channels order.
entertainment
children
arts
sports
news
movies
music
channel selection:
If the NexTView provider sends
information of more than 8
broadcast channels, you can select 8
of them to create your personal list.
After you have created your
personal list, the default list can be
restored. To restore it, select “Auto
(” by pressing button on the
remote control.
remind list:
Shows you the list with all the
programmes (maximum 5
programmes) that you have selected
to be reminded about.
01
Mon
TV1
TV2
TV3
TV4
TV5
TV6
TV7
TV8
00 : 30
01 : 30
05 : 30
06 : 30
07 : 30
08 : 30
09 : 30
10 : 30
Songs from the shows
Weather forecast informat i
A1 news magazine
Arts show
Oclock news
Weather forecast informat i
A1 news magazine
Arts show
02
Tu e
03
Wed
04
Thu
05
Fri
06
Sat
07
Sun 7 : 07 : 01
Songs from the shows
TV1 00:30 - 01:30 Thursday 04
Programme descriptio n
Record Remind
4
5
1
2
3
01
Mon
TV1
TV2
TV3
TV4
TV5
TV6
TV7
TV8
02
Tu e
03
Wed
04
Thu
05
Fri
06
Sat
07
Sun 9 : 15 : 03
9 : 00 9 : 30 10 : 00
Magazine
|
Songs from the shows
Weather Forecast
|
Mike's show
Euronews
|
Fantasy film
|
Star Wars
Home Shopping Europe
|
Euro Sports
News | Arts show
|
Magazine
Larry King's live |
Euro Sports
Euro magazine |
Euro Sports
Home Shopping Europe |
Euronews
Songs from the shows
TV1 00:30 - 01:30 Thursday 04
Programme descriptio n
Record Remind
1
2
3
4
5
01GBKV28/32FQ70K.fm Page 19 Wednesday, January 15, 2003 7:38 PM
20
Connecting Optional Equipment
Using the following instructions you can connect a wide range of optional equipment to
your TV set. (Connecting cables are not supplied).
To avoid picture distortion, do not connect external equipment to connectors A and B
at the same time.
Do not connect a Decoder to the Scart F.
Games that use a “GUN” attachment to point at the screen do not work correctly due to
100Hz technology used in this television.
Connecting a VCR:
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction
manual. We recommend you connect your VCR using a scart lead. If you do not have a scart
lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual
Programme Preset” option. (for details of how to manually programme these presets, see page
15, step a).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Connecting a VCR that supports SmartLink:
SmartLink is a direct link between the TV set and the VCR. For more information on
SmartLink, please refer to the instruction manual of your VCR.
If you use a VCR that supports SmartLink, please connect the VCR to the TV using a Scart
lead to the Scart
3/ 3 G.
If you have connected a decoder to the Scart 3/ 3 G or through a
VCR connected to this Scart:
Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the
“Decoder**” option, select “On” (by using or ). Repeat this option for each scrambled
signal.
**This option is only available depending on the country you have selected in the
“Language/Country” menu.
S
S
continued...
1
2
Decoder
Decoder
Hi-fi
E
F
D
When you connect
the headphones,
the TV speakers
will automatically
be muted.
G
DVD
“PlayStation”*
*
“PlayStation” is a
product of Sony
Computer
Entertainment, Inc.
* “PlayStation” is a
trademark of Sony
Computer
Entertainment, Inc.
A
C
B
S VHS/
Hi8/DVC
camcorder
8mm/
Hi8/DVC
camcorder
VCR
Additional Information
01GBKV28/32FQ70K.fm Page 20 Wednesday, January 15, 2003 7:38 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146

Sony KV-32FQ70K Návod na obsluhu

Kategória
Televízory LCD
Typ
Návod na obsluhu

V iných jazykoch