LG F2WN5S6S0 Užívateľská príručka

www.lg.com

OWNER'S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify

installation and ensure that the product is installed correctly and safely. Leave

these instructions near the product after installation for future reference.

EN ENGLISH

F*WN*

MFL71445731

Rev.00_082919

CZ ČEŠTINA

SK SLOVENČINA

TABLE OF CONTENTS

This manual may contain images or content

different from the model you purchased.

This manual is subject to revision by the

manufacturer.

IMPORTANT SAFETY INSTRUCTIONS ........................................3

READ ALL INSTRUCTIONS BEFORE USE ..................................................... 3

WARNING

.........................................................................................................3

CARING FOR THE ENVIRONMENT

................................................................8

Disposal of Your Old Appliance

.........................................................................8

INSTALLATION ...............................................................................9

Parts and Specifications....................................................................................9

Installation Place Requirements......................................................................10

Unpacking the Appliance.................................................................................12

Levelling the Appliance

...................................................................................12

Connecting the Water Inlet Hose

....................................................................13

Installing the Drain Hose

.................................................................................14

OPERATION .................................................................................15

Operation Overview ........................................................................................15

Preparing the Laundry.....................................................................................15

Adding Detergents and Softeners

...................................................................16

Control Panel

..................................................................................................18

Programme Table

............................................................................................ 19

Consumption Data

..........................................................................................22

Extra Options and Functions

........................................................................... 23

SMART FUNCTIONS ....................................................................25

Using LG SmartThinQ Application ..................................................................25

Using Smart Diagnosis....................................................................................28

MAINTENANCE ............................................................................ 29

Cleaning After Every Wash .............................................................................29

Cleaning the Appliance Periodically

................................................................30

TROUBLESHOOTING .................................................................. 32

Before Calling for Service ...............................................................................32

OPERATING DATA .......................................................................39

Product Fiche ..................................................................................................39

3

EN

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

The following safety guidelines are intended to prevent unforeseen

risks or damage from unsafe or incorrect operation of the

appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as

described below.

Safety Messages

This symbol is displayed to indicate matters and operations

that can cause risk. Read the part with this symbol carefully

and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause

serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the

minor injury or damage to the product.

WARNING

To reduce the risk of explosion, fire, death, electric shock,

injury or scalding to persons when using this product, follow

basic precautions, including the following:

4

EN

Technical Safety

• This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 3 years should be kept away unless continuously

supervised.

• If the power cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a

hazard.

• Ventilation openings must not be obstructed by a carpet.

• This appliance is intended to be used in household only and not in

applications such as;

− Staff kitchen areas in shops, offices and other working environments;

− Farm houses;

− By clients in hotels, motels and other residential type environments; −

Bed and breakfast type environments;

− Areas for communal use in blocks of flats or in launderettes

• Use a new hose or hose-set supplied with the appliance. Reusing old

hoses can cause a water leak and subsequent property damage.

• The water pressure must be between 100 and 1000 kPa.

• The maximum capacity in some cycles for dry clothes to be washed is

6.5 kg.

Installation

• Never attempt to operate the appliance if it is damaged,

malfunctioning, partially disassembled, or has missing or broken

parts, including a damaged cord or plug.

• This appliance should only be transported by two or more people

holding the appliance securely.

5

EN

• Do not install the appliance in a damp and dusty place. Do not install

or store the appliance in any outdoor area, or any area that is subject

to weathering conditions such as direct sunlight, wind, or rain or

temperatures below freezing.

• Tighten the drain hose to avoid separation.

• If the power cord is damaged or the hole of the socket outlet is loose,

do not use the power cord and contact an authorized service centre.

• Do not plug the appliance into multiple outlet sockets, power boards,

or an extension power cable.

• This appliance must not be installed behind a lockable door, a

sliding door or a door with a hinge on the opposite side to that of the

appliance, in such a way that a full opening of the appliance door is

restricted.

• This appliance must be grounded. In the event of malfunction or

breakdown, grounding will reduce the risk of electric shock by

providing a path of least resistance for electric current.

• This appliance is equipped with a power cord having an equipment

grounding conductor and a grounding power plug. The power plug

must be plugged into an appropriate socket outlet that is installed and

grounded in accordance with all local codes and ordinances.

• Improper connection of the equipment-grounding conductor can

result in risk of electric shock. Check with a qualified electrician or

service personnel if you are in doubt as to whether the appliance is

properly grounded.

• Do not modify the power plug provided with the appliance. If it

does not fit the outlet, have a proper outlet installed by a qualified

electrician.

Operation

• Do not attempt to separate any panels or disassemble the appliance.

• Do not apply any sharp objects to the control panel in order to

operate the appliance.

6

EN

• Do not repair or replace any part of the appliance. All repairs

and servicing must be performed by qualified service personnel

unless specifically recommended in this Owner’s Manual. Use only

authorized factory parts.

• Do not put animals, such as pets into the appliance.

• Keep the area underneath and around the appliance free of

combustible materials such as lint, paper, rags, chemicals, etc.

• Do not leave the appliance door open. Children may hang on the

door or crawl inside the appliance, causing damage or injury.

• Use new hose or hose-set supplied with the appliance. Reusing old

hoses can cause a water leak and subsequent property damage.

• Do not put in, wash or dry articles that have been cleaned in, washed

in, soaked in, or spotted with combustible or explosive substances

(such as waxes, wax removers, oil, paint, gasoline, degreasers,

drycleaning solvents, kerosene, petrol, spot removers, turpentine,

vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can

cause fire or explosion.

• Never reach into the appliance while it is operating. Wait until the

drum has completely stopped.

• In case of flood, disconnect the power plug and contact the LG

Electronics customer information centre.

• Do not push down the door excessively, when the appliance door is

open.

• Do not touch the door during a high temperature programme.

• Do not use flammable gas and combustible substances (benzene,

gasoline, thinner, petroleum, alcohol, etc.) near the appliance.

• If the drain hose or inlet hose is frozen during winter, use it only after

thawing.

• Keep all washing detergents, softener and bleach away from children.

• Do not touch the power plug or the appliance controls with wet hands.

• Do not bend the power cable excessively or place a heavy object on

it.

• Do not wash rugs, mats, shoes or pet blankets, or any other items

other than clothes or sheets, in this machine.

7

EN

• This appliance must only be used for domestic household purposes

and should not be used in mobile applications.

• If there is a gas leakage (isobutane, propane, natural gas, etc.),

do not touch the appliance or power plug and ventilate the area

immediately.

Maintenance

• Securely plug the power plug in the socket outlet after completely

removing any moisture and dust.

• Disconnect the appliance from the power supply before cleaning the

appliance. Setting the controls to the OFF or stand by position does

not disconnect this appliance from the power supply.

• Do not spray water inside or outside the appliance to clean it.

• Never unplug the appliance by pulling on the power cable. Always

grip the power plug firmly and pull straight out from the socket outlet.

Disposal

• Before discarding an old appliance, unplug it. Cut off the cable

directly behind the appliance to prevent misuse.

• Dispose of all packaging materials (such as plastic bags and

styrofoam) away from children. The packaging materials can cause

suffocation.

• Remove the door before disposing of or discarding this appliance to

avoid the danger of children or small animals getting trapped inside.

8

EN

CARING FOR THE ENVIRONMENT

Disposal of Your Old Appliance

• This crossed-out wheeled bin symbol indicates that waste electrical and electronic

products (WEEE) should be disposed of separately from the municipal waste

stream.

• Old electrical products can contain hazardous substances so correct disposal

of your old appliance will help prevent potential negative consequences for the

environment and human health. Your old appliance may contain reusable parts that

could be used to repair other products, and other valuable materials that can be

recycled to conserve limited resources.

• You can take your appliance either to the shop where you purchased the product,

or contact your local government waste office for details of your nearest authorised

WEEE collection point. For the most up to date information for your country, please

see www.lg.com/global/recycling.

9

EN

INSTALLATION

Front View

a Control panel

b Detergent dispenser drawer

c Drum

d Door

e Cover cap

f Drain pump filter

g Drain plug

h Adjustable feet

Rear View

a Power plug

b Transit bolts

c Drain hose

Parts and Specifications

NOTE

• Appearance and specifications may change without notice to improve the quality of the appliance.

Accessories

* This feature is only available on some models.

a Cold water inlet hose*

b Spanner

c Caps for covering transit bolt holes*

d Elbow bracket for securing drain hose*

10

EN

Specifications

Model F*WN*

Power Supply 220 - 240 V~, 50 Hz

Dimension

(Width x Depth x Height)

600 mm X 450 mm X 850 mm

Product Weight 63 kg

• No further backflow protection required for connection to the water inlet.

Installation Place

Requirements

Before installing the appliance, check the following

information to make sure that the appliance should

be installed in a correct place.

Installation Location

• Install the appliance on a flat floor. (Allowable

slope under the appliance: 1°)

• Never try to level any uneven floor by putting

pieces of wood, cardboard or similar materials

under the appliance.

• If it is impossible to avoid positioning the

appliance next to a gas cooker or coal burning

stove, an insulation (850 X 600 mm) covered

with aluminium foil on the side facing the cooker

or stove must be inserted between the two

appliances.

• Ensure that when the appliance is installed, it is

easily accessible for an engineer in the event of

a breakdown.

• When installing the appliance, adjust all four feet

using the transit bolt spanner which makes the

appliance stable, and leave approximate 5 mm

for a clearance between the top of the appliance

and the underside of any worktop.

• Additional clearance should have 100 mm for

the wall and 20 mm for rear, right and left side.

100 mm

20 mm

5 mm

20 mm

WARNING

• This appliance must only be used for domestic

household purposes and should not be used in

mobile applications.

NOTE

• If the appliance is installed on a raised platform,

it must be securely fastened in order to eliminate

the risk of falling off.

11

EN

Wooden Floors (Suspended

Floors)

When installing the appliance on wooden floors,

use rubber cups to prevent the appliance from

excessive vibration and unbalance.

• To prevent vibration, we recommend you to

place rubber cups a at least 15 mm thick of the

each foot of the appliance, secured to at least

two floor beams with screws.

• If possible, install the appliance in one of the

corners of the room, where the floor is more

stable.

• Fit the rubber cups to reduce vibration.

CAUTION

• This appliance must only be used for domestic

household purposes and should not be used in

mobile applications.

• If the appliance is installed on the unstable

floor (e.g. wooden floor), the warranty does not

cover any damages and cost occured due to the

installation on the unstable floor.

NOTE

• You can purchase rubber cups (Part No.

4620ER4002B) from the LG Electronics service

centre.

Ventilation

• Make sure that air circulation around the

appliance should not be impeded by carpets,

rugs, etc.

Ambient Temperature

• Do not install the appliance in rooms where

freezing temperatures may occur. Frozen hoses

may burst under pressure. The reliability of

the electronic control unit may be impaired at

temperatures below freezing point.

• If the appliance is delivered in winter and

temperatures are below freezing, place the

appliance at room temperature for a few hours

before putting it into operation.

Electrical Connection

• Do not use an extension cord or double adapter.

• Always unplug the appliance and turn off the

water inlet after use.

• Connect the appliance to an earthed socket in

accordance with current wiring regulations.

• The appliance must be positioned so that the

plug is easily accessible.

• Power outlet must be at least 1 meter of either

side of the appliance.

WARNING

• Repairs to the appliance must only be carried

out by the qualified personnel. Repairs carried

out by inexperienced persons may cause injury

or serious malfunctioning. Contact your LG

Electronics service centre.

• The power plug must be plugged into an

appropriate socket outlet that is installed and

grounded in accordance with all local codes and

ordinances.

12

EN

Unpacking the Appliance

Lifting the Appliance Off the Foam

Base

* This feature is only available on some models.

After removing the carton and shipping material, lift

the appliance off the foam base.

• Make sure the tub support a* comes off with

the base and is not stuck to the bottom of the

appliance.

• If you must lay the appliance down to remove

the carton base b, always protect the side of

the appliance and lay it carefully on its side. Do

not lay the appliance on its front or back.

*

Removing the Bolt Assemblies

1

Starting with the bottom transit bolts a, use

the spanner (included) to fully loosen all transit

bolts by turning them counterclockwise.

2

Remove the bolt assemblies by wiggling them

slightly while pulling them out.

3

Install the hole caps.

• Locate the hole caps b included in the

accessory pack or attached on the back.

Levelling the Appliance

Checking the Level

Levelling the appliance prevents unnecessary

noise and vibration. Check whether the appliance is

perfectly level after installation.

• If the appliance rocks when pushing the top

plate of the appliance diagonally, adjust the feet

again.

Adjusting and Levelling the Feet

When installing the appliance, the appliance should

be aligned and perfectly level.

• If the appliance is not aligned and level properly,

the appliance may be damaged or may not

operate properly.

13

EN

1

Turn the adjustable feet as required if the floor

is uneven.

• Do not insert pieces of wood etc. under the

feet.

• Make sure that all four feet should be stable

and resting on the floor.

2

Check if the appliance is perfectly level using a

spirit level a.

3

Secure the adjusting feet with the lock nuts b

by turning counterclockwise against the bottom

of the appliance.

4

Check if all lock nuts at the bottom of the

appliance are secured properly.

NOTE

• Proper placement and levelling of the appliance

will ensure long, regular, and reliable operation.

• The appliance must be level and stand firmly in

position.

• It must not ‘Seesaw’ across corners under the

load.

• Do not let the feet of the appliance get wet.

Failure to do so may cause vibration or noise.

Connecting the Water Inlet

Hose

Note for Connection

• Water pressure must be between 100 kPa

and 1000 kPa (1.0 - 10.0 kgf/cm²). If the

water pressure is more than 1000 kPa, a

decompression device should be installed.

• Do not overtighten the water inlet hose to all

valves.

• Periodically check the condition of the hose and

replace the hose if necessary.

Checking the Rubber Seal on the

Water Inlet Hose

Two rubber seals a are supplied with the water

inlet hoses. They are used to prevent water leaks.

Make sure that the connection to taps should be

sufficiently tight.

14

EN

Connecting Hose to Water Tap

Screw - Type Hose to Tap with Thread

Screw the hose connector to the water supply,

which has ¾” threaded union.

NOTE

• Before connecting the inlet hose to the water

tap, turn on the water tap to flush out foreign

substances (dirt, sand, sawdust, and etc.) in the

water lines. Let the water drain into a bucket,

and check the water temperature.

Connecting Hose to the Appliance

Screw the water line to the water supply on the

back of the appliance.

NOTE

• After completing connection, if water leaks from

the hose, repeat the same steps. Use the most

conventional type of tap for the water supply. If

the tap is square or too big, remove the guide

plate before inserting the tap into the adaptor.

• Make sure that the hose should not be kinked or

trapped.

Installing the Drain Hose

For Model with Drain Pump

The drain hose should not be placed higher than

100 cm above the floor. Water in the appliance may

not drain or may drain slowly.

• Securing the drain hose correctly will protect the

floor from damage due to water leakage.

_DN

• If the drain hose is too long, do not force it back

into the appliance. This will cause abnormal

noise.

• When installing the drain hose to a sink, secure

it tightly with string.

15

EN

OPERATION

Operation Overview

Using the Appliance

Before the first wash, select the Cotton wash

programme and add a half amount of the detergent.

Start the appliance without laundry. This will remove

possible residues and water from the drum that may

have been left during manufacturing.

1

Sort laundry and load items.

• Sort laundry by fabric type, soil level, colour

and load size as needed. Open the door and

load items into the appliance.

2

Add detergent or softener.

• Add the proper amount of detergent to the

detergent dispenser drawer. If desired, add

bleach or fabric softener to the appropriate

areas of the dispenser.

3

Turn on the appliance.

• Press the Power button to turn on the

appliance.

4

Choose the desired cycle.

• Press the cycle button repeatedly or turn the

cycle selector knob until the desired cycle is

selected.

• Now select a wash temperature and spin

speed. Pay attention to a fabric care label of

your clothes.

5

Begin cycle.

• Press the Start/Pause button to begin the

cycle. The appliance will agitate briefly

without water to measure the weight of the

load. If the Start/Pause button is not pressed

within 15 minutes, the appliance will shut off

and all settings will be lost.

6

End of cycle.

• When the cycle is finished, a melody will

sound. Immediately remove your clothing

from the appliance to reduce wrinkling.

Check around the door seal when removing

the load for small items that may be caught

in the seal.

Preparing the Laundry

Sort laundry for best washing results, and then

prepare laundry according to the symbols on the

care labels.

Sorting the Clothes

• For best washing results, sort your clothes

according to a care label stating fabric type and

washing temperature. Adjust the spin speed to

wash them.

• Soil level (Heavy, Normal, Light): Separate

clothes according to soil level. If possible, do

not wash heavily soiled items with lightly soiled

ones.

• Colour (White, Lights, Darks): Wash separately

dark or dyed clothes from whites or light colours.

Mixing dyed clothes with light clothes can

result in dye transfer or discolouration of lighter

clothes.

• Lint (Lint producers, Collectors): Wash

separately lint producing fabrics from lint

collecting fabrics. Lint producers can result in

pilling and linting on the lint collectors.

Checking the Fabric Care Label

Symbols on the care labels

The symbols tell you about the fabric content of

your clothes and how it should be washed.

Symbol Wash / Fabric type

• Normal Wash

• Cotton, Mixed Fabrics

• Easy Care

• Synthetic, Mixed Fabrics

• Special Delicate Wash

• Delicates

• Hand Wash Only

• Wool, Silk

• Do not wash

NOTE

• The dashes under the symbol give you

information about the type of fabric and the

maximum allowance of mechanical stress.

16

EN

Checking the Clothes before

Loading

• Combine large and small items in a load. Load

large items first. Large items should not be more

than half of total load.

• Do not wash single small items. Add 1-2 similar

items to the load to prevent an out-of-balance

load.

• Make sure to empty all pockets. Items such as

nails, hair clips, matches, pens, coins and keys

can damage both your appliance and clothes.

• Wash delicates (stockings, underwired bras) in

a wash net.

• Close zippers, hooks and strings to make sure

that these items do not snag other clothes.

• Pre-treat dirt and stains by saturating the

dirt and stains with dissolved detergent and

brushing them in order to remove dirt.

• Check the folds of the flexible gasket (gray) and

remove any small items.

CAUTION

• Check if the laundry gets stuck between the

door and the seal, otherwise the laundry may

get damaged while washing.

• Remove items from the flexible gasket to prevent

clothing and door seal damage.

Adding Detergents and

Softeners

Detergent Dosage

• Detergent should be used according to the

instruction of the detergent manufacturer and

selected according to type, colour, soiling of the

fabric and the washing temperature.

• Reduce the amount of detergent if too many

suds are formed.

• Too much detergent results in excessive suds

which cause poor washing.

• When you use liquid detergent, follow

the guidelines provided by the detergent

manufacturer.

• You can pour liquid detergent directly into the

main detergent drawer if you are starting the

wash cycle immediately.

• Do not use liquid detergent if you are using

Delay End function, or if you have selected

Pre Wash option, as the liquid may harden.

• Detergent usage may need to be adjusted for

water temperature, water hardness, size and

soil level of the laundry. For best results, avoid

oversudsing.

• Refer to the label of the clothes, before choosing

the detergent and water temperature.

• Use only suitable detergents for the respective

type of clothing:

− Liquid detergent is often designed for special

applications, e.g. for coloured fabric, wool,

delicate or dark laundry.

− Powdered detergent is suitable for all types

of fabric.

− For better washing results of white and pale

clothes, use powdered detergent with bleach.

− Detergent is dispensed from the dispenser at

the beginning of the wash cycle.

17

EN

NOTE

• Do not let the detergent harden. Doing so may

lead to blockages, poor rinse performance or

odour.

• Full load: According to manufacturer’s

recommendation

• Part load: ¾ of the normal amount

• Minimum load: ½ of full load

Adding Detergent

• Detergent for main wash a only ~ J

• Detergent for pre wash b and main wash a ~

d # J

NOTE

• Use the appropriate amount of detergent. Too

much detergent, bleach or softener may cause

an overflow.

• When selecting Pre Wash, divide the dosage

into ⅓ for pre wash and ⅔ for main wash.

Adding Detergent Tablet

Detergent tablet is also available when washing

laundry.

1

Open the door and put detergent tablets into

the drum.

2

Load the laundry into the drum and close the

door.

NOTE

• Do not put tablets into the drawer.

Adding Fabric Softener

• Add a fabric softener to the maximum fill line.

• Close the dispenser drawer gently.

• Do not leave the fabric softener in the detergent

drawer for more than 2 days. Fabric softener

may harden.

• Softener will automatically be added during the

last rinse cycle.

• Do not open the drawer when water is being

supplied.

• Solvents (e.g. benzene, etc.) must not be used.

NOTE

• Pouring excessive fabric softener over the

maximum fill line can cause it to dispense too

early, which may stain clothes.

• Do not pour fabric softener directly onto the

laundry, which may stain the laundry.

Adding Water Softener

A water softener, such as anti-limescale can be

used to cut down on the use of detergent in areas

with high water hardness level.

• First add detergent, and then the water softener.

Dispense according to the amount specified on

the packaging.

18

EN

Control Panel

Control Panel Features

a Power Button

• Press the Power button to turn on or off the appliance.

b Programme Knob

• Programmes are available according to the laundry type.

• The lamp will light up to indicate the selected programme.

c Start/Pause Button

• Press the Start/Pause button to start or pause a wash cycle.

• Press the Start/Pause button to stop a wash cycle temporarily.

d Extra Options and Functions

• You can use the extra options and functions to customize the programmes.

• To use the extra functions, press and hold the corresponding button for 3 seconds. The

corresponding symbol lights up in the display.

• In order to use the Dálkový štart (Remote Start) function, refer to SMART FUNCTIONS.

• This allows you to select an additional programmes and will light when selected.

− f : This icon turns on when the appliance is connected to Wi-Fi network at home.

e Display

• The display shows the settings, remaining estimated time, options, and status messages. When the

appliance is turned on, the default settings in the display will light up.

− 18:88: When a programme is selected, the default time for that programme is displayed. The default

time can be changed according to the selected option.

− k : When the laundry is being washed, this icon is illuminated.

− l : When the laundry is being rinsed after completion of washing programme, this icon is

illuminated.

− p : When the laundry is spun to remove the water in the laundry, this icon is illuminated.

− H : When this icon is illuminated, the door cannot be opened.

19

EN

a AI DD

• AI DD M provides the desired washing and spinning.

• M is activated when Bavlna (Cotton), Smíšené prádlo (Mixed Fabric) and Syntetika (Easy Care)

programmes are selected and operated.

Programme Table

Washing Programme

Programme Bavlna (Cotton) Max. Load Rating

Description Provides better performance by combining various drum motions.

Use for coloured fast items (shirts, nightdresses, pajamas, etc.) and normally

soiled cotton load (underwear).

Proper Temperature 40 °C (Cold to 95 °C)

Max. Spin Speed 1200 rpm

Programme Bavlna+ (Cotton+) Max. Load Rating

Description Provides optimised washing performance for large amount of laundry with less

energy consumption.

Use for coloured fast items (shirts, nightdresses, pajamas, etc.) and normally

soiled cotton items (underwear).

Proper Temperature 60 °C (Cold to 60 °C)

Max. Spin Speed 1200 rpm

Programme Smíšené prádlo (Mixed Fabric) Max. Load 3 kg

Description Enables various fabrics to be washed simultaneously.

Use for various kind of fabrics except special items (silk/delicate, sports wear,

dark clothes, wool, duvet/curtains).

Proper Temperature 40 °C (Cold to 60 °C)

Max. Spin Speed 1200 rpm

Programme Syntetika (Easy Care) Max. Load 3 kg

Description Suitable for casual shirts that do not need ironing after washing.

Use for Polyamide, acrylic, polyester.

Proper Temperature 40 °C (cold to 60 °C)

Max. Spin Speed 1200 rpm

20

EN

Programme Tiché praní (Silent Wash) Max. Load 3.0 kg

Description Provides less noise and vibration and saves money by using overnight electricity.

Use for coloured fast garments (shirts, nightdresses, pajamas, etc.) and lightly

soiled white cotton (underwear).

Proper Temperature 40 °C (Cold to 60 °C)

Max. Spin Speed 1000 rpm

Programme Pro alergiky (Allergy Care) Max. Load 3.0 kg

Description Helps to remove allergens such as house mites, pollen and fur.

Proper Temperature 60 °C

Max. Spin Speed 1200 rpm

Programme

Dětská parní péče (Baby Steam Care)

Max. Load 3.0 kg

Description Provides clothes care with gentle motion and better performance by steam.

Proper Temperature 60 °C

Max. Spin Speed 1000 rpm

Programme Jemné prádlo (Delicates) Max. Load 2 kg

Description Suitable for delicate clothes such as underwear, blouse, etc

Proper Temperature 20 °C (Cold to 40 °C)

Max. Spin Speed 800 rpm

Programme Ruční praní/Vlna (Hand/Wool) Max. Load 1.5 kg

Description For hand and machine washable delicate clothes such as washable wool,

lingerie, dresses etc. (Use detergent for machine washable woolens).Use for

Wool, Silk, hand washable clothes, delicate, easily damaged laundry.

Proper Temperature 30 °C (Cold to 40 °C)

Max. Spin Speed 800 rpm

Programme Sportovní oblečení (Sportswear) Max. Load 2 kg

Description Suitable for special items like sports and outdoor wear.

Use for Coolmax, gore-tex, fleece and sympatex.

Proper Temperature 40 °C (Cold to 40 °C)

Max. Spin Speed 800 rpm

Stránka sa načítava...

LG F2WN5S6S0 Užívateľská príručka

Tento návod je vhodný aj pre

LG F2WN5S6S0 Užívateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty