19
Stubborn clean up:
If ingredients get stuck to the
NutriBullet® cups or easy-twist
extractor blades, here’s an
easy cleanup solution: fill the
vessel with room temperature
(21°C/70°F or less) water to its
MAX line and add 1-2 drops of
dish soap. Twist on the easy-
twist extractor blade and blend
on the motor base for 20-30
seconds. This should loosen the
debris enough to scrub it away
with soap and water.
How to store:
Store the NutriBullet PRO® 1000
upright. Do not place anything
on top of it. Store remaining
pieces in a safe place where
they will not be damaged and
won’t cause harm.
WARNING: NEVER store the easy-
twist extractor blade on the motor
base without a NutriBullet® cup as
the exposed blades pose a serious
laceration hazard.
reduce buildup of residue. If
food particles get stuck, use
a small brush or sponge to
target and dislodge them.
• Do not remove any
components of the easy-twist
extractor blade; this can result
in permanent damage to the
blade, resulting in leakage
when blending. If, over time,
the easy-twist extractor blade
becomes loose or damaged,
you may order a new easy-
twist extractor blade at
nutribullet.com or contact
Customer Service.
• Dry the easy-twist extractor
blade completely after
every use.
• Regularly check the
condition of the bottom
of the blade for cracking
or breakage. If damaged,
replace easy-twist extractor
blade immediately to prevent
possible personal injury.
NUTRIBULLET® CUPS
& TOGO LIDS:
These items are TOP RACK
dishwasher-safe. We recommend
rinsing and briefly scrubbing
them with a dish brush to remove
any remaining debris before
placing in the dishwasher. NEVER
use the sanitize cycle to wash the
cups — heat this high can warp
the plastic.
Replacement parts.
To order additional parts and
accessories, please visit our
website at nutribullet.com or
feel free to contact Customer
Service.