Hama 00139917 Návod na obsluhu

Typ
Návod na obsluhu

Táto príručka je tiež vhodná pre

Spot-Pointer 8in1Wireless Laser Presenter
Wireless Laser Presenter
E
CZ
F
D
GB
I
P
NL
RO
H
PL
SK
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Instrucciones de uso
Istruzioni per l‘uso
Gebruiksaanwijzing
Instrukcja obsługi
Használati útmutató
Návod kpoužití
Návod na použitie
Manual de instruções
Manual de utilizare
00
139917
Pic. 2
Pic. 1
1
2
3
4
5
8
7
6
9
2
G Operating instruction
Controls
1. "Back" button,when the button is held: black
screen
2. "Next" button,when the button is held: Play /
Exit the PowerPoint
3. Button :Activation of hyperlinks -when the
button is held: Size change
Double-click: change of the function types, see
"5. Function types".
4. Display: Timer display -Remaining presentation time
5. USB connection
6. Timer button:activate and display the preset timer -
when the button is held: Timer display
Double-click: Start timer
7. On/Off switch
8. Storage compartment for receiver (dongle)
9. Micro-SD cardslot
Thank you for choosing aHama product. Take your time
and read the following instructions and information
completely.Please keep these instructions in asafe place
for futurereference. If you sell the device, please pass
these operating instructions on to the new owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2. Package contents
•"Spot-Pointer 8in1" Wireless Digital Presenter
•USB receiver
•Micro-SD cardwith software
•USB charging cable
•Transport bag
•These operating instructions
3. Safety instructions
•The product is intended for private, non-commercial
use only.
•Donot use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
•Aswith all electrical products, this device should be
kept out of the reach of children.
•Donot drop the product and do not expose it to any
major shocks.
•Donot operate the product outside the power limits
specied in the technical data.
•Donot use the product in areas in which electronic
products arenot permitted.
•Donot open the device or continue to operate it if it
becomes damaged.
•The battery is permanently installed and cannot
be removed; dispose of the product as awhole in
accordance with the statutory regulations.
•Keep the packaging material out of the reach of
children due to the risk of suffocation.
•Dispose of packaging material immediately in
accordance with the locally applicable regulations.
•Donot modify the product in any way.Doing so voids
the warranty.
•Donot incinerate the battery or the product.
•Donot tamper with or damage/heat/disassemble the
batteries/rechargeable batteries.
3
4. Operation
4.1 Charge the Spotlight Presenter
If the following symbol appears on the display:
the battery status is low.Connect the supplied USB
charging cable to the micro-USB port (5). Connect the
free plug on the USB charging cable to asuitable USB
charger.
Acomplete charging cycle takes about 2hours.
Warning –rechargeable battery
Only use suitable charging devices or USB connections to
charge the product.
Do not use defective chargers or USB ports and do not
attempt to repair them.
Avoid storing, charging and using in extreme temperatures
and at extremely low atmospheric pressures (such as at
high altitudes).
Charge regularly (at least quarterly) during periods of
prolonged storage.
4.2 Quick start
1. Plug the receiver into an available USB port on your
device.
2. After automatic driver installation, the removable data
medium opens
TF cardDongle
3. Install the required Spot-Pointer software
4. Switch the Presenter on following successful
installation (7).
The following symbol now appears in the task bar:
Note
If the Presenter is switched off,orifthe receiver is not
connected to the computer,this will be indicated by a
colourless symbol.
5. Function types
1. Spot illumination mode
2. Magnifying glass function
3. Digital laser pointer
•Pressing the obutton (3) twice allows you to toggle
between the function types
•Bypressing and holding the obutton (3), you
can change the size of the laser pointer,spot and
magnifying glass with the two function keys (1) and (2)
4
6. Software functions
1. Selection to set the function type
2. Individual setting of the background shading when
spot illumination mode is active
3. Setting of the background transparency when spot
illumination mode is active
4. Individual setting of the colour of the digital pointer
5. Setting of the transparency of the digital pointer
6. Setting of the size of the modes used
7. Setting of the magnifying glass's zoom function
8. Timer: Beforethe meeting, set atime for the
vibration alarm (maximum alarm time: 199 minutes).
The display allows you to keep an eye on the
presentation time.
TACTILE FEEDBACK
Receive asilent alarm when using the timer and
when the battery level is low.
9. Software-language selection
1
2
4
6
8
9
7
5
3
5
7. Care and Maintenance
Clean this product only using alint-free, slightly damp
cloth and do not use any harsh cleaners. Take careto
ensurethat no water enters the product.
8. Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failuretoobserve the operating instructions and/
or safety notes.
9. Technical data
Connection
Wireless, 2.4 GHz
connection
Function range <20m*
Battery
Li-Ion 3.7V 250mAh /
0.925Wh
Battery Use Time
(rechargeable): 3months*
Connection
Micro-USB as acharging
function
Power supply 5V
300mA
Size 130 x22x35 mm
Weight approx. 40g
System
requirements
Windows 10 /8/7
Mac OS X10orhigher
Restricted functionality (no
software): Chrome OS™,
Linux
®
,Android™
*Depending on the conditions of use
10. Declaration of Conformity
Hereby,Hama GmbH &CoKGdeclares that
the radio equipment type [00139917] is in
compliance with Directive 2014/53/EU.The full
text of the EU declaration of conformity is available at the
following internet address:
www.hama.com ->00139917->Downloads.
Frequency band(s) 2402 –2480 MHz
Maximum radio-frequency
power transmitted
-1.8 dBm e.i.r.p.
6
D Bedienungsanleitung
Bedienelemente
1. „Zurück“ Taste,beim Halten der Taste:
schwarzer Bildschirm
2. „Weiter“ Taste,beim Halten der Taste:
Abspielen/Verlassen der Power-Point
3. Taste :Aktivieren der Hyperlinks -Halten der
Taste: Größenveränderung
Doppelklick: Wechsel der Funktionarten, siehe
"5. Funktionsarten".
4. Display: Timer Anzeige -Verbleibende
Präsentationszeit
5. USB-Anschluss
6. Timer –Taste:Aktivieren und Anzeigen des
voreingestellten Timers –Halten der Taste: Timer
Anzeige
Doppelklick: Timer Starten
7. Ein -/Ausschalter
8. Staufach für Receiver (Dongle)
9. Micro-SD Kartenslot
Vielen Dank, dass Sie sich für ein Hama Produkt
entschieden haben! Nehmen Sie sich Zeit und lesen Sie
die folgenden Anweisungen und Hinweise zunächst
ganz durch. Bewahren Sie diese Bedienungsanleitung
anschließend an einem sicheren Ort auf,umbei Bedarf
darin nachschlagen zu können. Sollten Sie das Gerät
veräußern, geben Sie diese Bedienungsanleitung an den
neuen Eigentümer weiter.
1. Erklärung von Warnsymbolen und Hinweisen
Warnung
Wirdverwendet, um Sicherheitshinweise zu kennzeichnen
oder um Aufmerksamkeit auf besondereGefahren und Risiken
zu lenken.
Hinweis
Wirdverwendet, um zusätzlich Informationen oder
wichtige Hinweise zu kennzeichnen.
2. Packungsinhalt
•Wireless-Digital-Presenter „Spot-Pointer 8in1”
•USB Receiver
•Micro-SD Karte mit Software
•USB-Ladekabel
•Transporttasche
•diese Bedienungsanleitung
3. Sicherheitshinweise
•Das Produkt ist für den privaten, nicht-gewerblichen
Haushaltsgebrauch vorgesehen.
•Betreiben Sie das Produkt nicht in unmittelbarer Nähe
der Heizung, anderer Hitzequellen oder in direkter
Sonneneinstrahlung.
•Dieses Produkt gehört, wie alle elektrischen Produkte,
nicht in Kinderhände!
•Lassen Sie das Produkt nicht fallen und setzen Sie es
keinen heftigen Erschütterungen aus.
•Betreiben Sie das Produkt nicht außerhalb
seiner in den technischen Daten angegebenen
Leistungsgrenzen.
•Benutzen Sie das Produkt nicht in Bereichen, in denen
elektronische Produkte nicht erlaubt sind.
•Öffnen Sie das Produkt nicht und betreiben Sie es bei
Beschädigungen nicht weiter.
•Der Akku ist fest eingebaut und kann nicht entfernt
werden, entsorgen Sie das Produkt als Ganzes gemäß
den gesetzlichen Bestimmungen.
•Halten Sie Kinder unbedingt von dem
Verpackungsmaterial fern, es besteht
Erstickungsgefahr.
•Entsorgen Sie das Verpackungsmaterial sofort gemäß
den örtlich gültigen Entsorgungsvorschriften.
•Nehmen Sie keine Veränderungen am
Produkt vor.Dadurch verlieren Sie jegliche
Gewährleistungsansprüche.
•Werfen Sie den Akku bzw.das Produkt nicht ins Feuer.
•Verändern und/oder deformieren/erhitzen/zerlegen Sie
Akkus/Batterien nicht.
7
4. Betrieb
4.1 Spotlight Präsenter laden
Wirdfolgendes Symbol am Display angezeigt :
Ist der Batteriestatus niedrig. Schließen Sie das
mitgelieferten USB –Ladekabel am Micro-USB Anschluss
(5) an. Schließen sie den freien Stecker des USB-
Ladekabels an ein geeignetes USB-Ladegerät an.
Ein kompletter Ladevorgang dauert ca. 2Std.
Warnung –Akku
Verwenden Sie nur geeignete Ladegeräte mit USB
Anschlüssen zum Aufladen.
Verwenden Sie defekte Ladegeräte oder USB Anschlüsse
generell nicht mehr und versuchen Sie nicht, diese zu
reparieren.
Vermeiden Sie Lagerung, Laden und Benutzung bei
extremen Temperaturen und extrem niedrigem Luftdruck
(wie z.B. in großen Höhen).
Laden Sie bei längerer Lagerung regelmäßig (mind.
vierteljährig) nach.
4.2 Schnellstart
1. Stecken Sie den Receiver in einen freien USB-Anschluss
ihres Gerätes.
2. Nach der automatischen Treiberinstallation, öffnet sich
der Wechseldatenträger
TF cardDongle
3. Installieren Sie die erforderliche Spot-Pointer Software
4. Schalten Sie den Präsenter nach erfolgreicher
Installation ein (7).
In der Taskleiste erscheint nun folgendes Symbol:
Hinweis
Ist der Präsenter ausgeschalten, oder der Receiver
nicht am Computer angeschlossen, wirdesals
farblosen Symbol signalisiert.
5. Funktionsarten
1. Spot-Illumination –Modus
2. Lupen –Funktion
3. Digitaler Laserpointer
•Durch 2x drücken der Taste o(3) schalten sie zwischen
den Funktionsarten durch
•Indem Sie die Taste o(3) gedrückt halten, könnten
Sie mithilfe der beiden Funktionstasten (1) und (2)
die Größe vom Laserpointer sowie dem Spot und der
Lupe verändern
8
6. Softwarefunktionen
1. Auswahl zum Einstellen der Funktionsart
2. Individuelle Einstellung der Hintergrund-Schattierung
bei aktivem Spot-Illumination-Modus
3. Einstellung der Hintergrund-Transparenz bei aktivem
Spot-Illumination-Modus
4. Individuelle Einstellung der Farbe des digitalen
Pointers
5. Einstellung der Transparenz des digitalen Pointers
6. Einstellung der Größe des verwendeten Modi
7. Einstellung der Zoom-Funktion der Lupe
8. Timer: Stellen Sie vor der Besprechung eine Zeit
für den Vibrationsalarm ein (maximale Alarmzeit:
199 Minuten). Mit dem Display behalten Sie die
Präsentationszeit im Blick.
HAPTISCHES FEEDBACK
Erhalten Sie einen stillen Vibrationsalarm beim
Verwenden des Timers und bei niedrigem Akkustand.
9. Software–Sprachauswahl
1
2
4
6
8
9
7
5
3
9
7. Wartung und Pflege
Reinigen Sie dieses Produkt nur mit einem fusselfreien,
leicht feuchten Tuch und verwenden Sie keine
aggressiven Reiniger.Achten Sie darauf,dass kein
Wasser in das Produkt eindringt.
8. Haftungsausschluss
Die Hama GmbH &CoKbernimmt keinerlei
Haftung oder Gewährleistung für Schäden, die
aus unsachgemäßer Installation, Montage und
unsachgemäßem Gebrauch des Produktes oder einer
Nichtbeachtung der Bedienungsanleitung und/oder der
Sicherheitshinweise resultieren.
9. Technische Daten
Verbindung
kabellose 2,4-GHz-
Verbindung
Funktionsreichweite <20m*
Batterie
Li-Ion 3.7V 250mAh /
0.925Wh
Akkulaufzeit
(wiederauadbar): 3
Monate*
Anschluss
Micro–USB als
Ladefunktion
Stromversorgung 5V
300mA
Größe 130 x22x35 mm
Gewicht ca. 40g
System-
voraussetzungen
Windows 10 /8/7
Mac OS X10oder höher
Eingeschränkter
Funktionsumfang (keine
Software): Chrome OS™,
Linux
®
,Android™
*abhängig von Nutzungs- und Umgebungsbedingungen
10. Konformitätserklärung
Hiermit erklärt die Hama GmbH &CoKG,
dass der Funkanlagentyp [00139917] der
Richtlinie 2014/53/EU entspricht. Der
vollständige Text der EU-Konformitätserklärung ist unter
der folgenden Internetadresse verfügbar:
www.hama.com->00139917 -> Downloads.
Frequenzband/Frequenzbänder 2402 –2480 MHz
Abgestrahlte maximale
Sendeleistung
-1.8 dBm e.i.r.p.
10
F Mode d‘emploi
Éléments de commande
1. Touche "Précédent",enmaintenant la pression
la touche cran noir
2. Touche "Suivant",enmaintenant la pression
sur la touche :lire/quitter le Power-point
3. Touche :activer les liens hypertextes -maintien
de la pression sur la touche :changement de la taille
Double-clic :changement des modes
de fonctionnement, voir "5. Modes de
fonctionnement".
4. Écran :achage du minuteur -Durée de présentation
restante
5. Port USB
6. Touche du minuteur :activer et acher le minuteur
préréglé –Maintien de la pression sur la touche :
achage du minuteur
Double-clic :lancer le minuteur
7. Interrupteur marche/arrêt
8. Compartiment de rangement du récepteur (dongle)
9. Emplacement pour carte micro-SD
Nous vous remercions d’avoir choisi un produit Hama
!Veuillezprendreletemps de lirel’ensemble des
remarques et consignes suivantes. Veuillez conserver
ce mode d’emploi àportée de main andepouvoir le
consulter en cas de besoin. Transmettez-le au nouveau
propriétaireavec l’appareil le cas échéant.
1. Explication des symboles d’avertissement et
des remarques
Avertissement
Ce symbole est utilisé pour indiquer des consignes de sécurité
ou pour attirer votreattention sur des dangers et risques
particuliers.
Remarque
Ce symbole est utilisé pour indiquer des informations
supplémentaires ou des remarques importantes.
2. Contenu de l’emballage
•Présentateur numérique sans l"Spot-Pointer 8in1"
•Récepteur USB
•Carte micro-SD avec logiciel
•Câble de charge USB
•Étui de transport
•Leprésent mode d’emploi
3. Consignes de sécurité
•Ceproduit est destiné àune utilisation domestique
non commerciale.
•N’utilisez pas le produit àproximité immédiate d’un
chauffage, d’autres sources de chaleur ou àlalumière
directe du soleil.
•Cet appareil, comme tout appareil électrique, doit être
gardé hors de portée des enfants !
•Protégez le produit des secousses violentes et évitez
tout choc ou toute chute.
•N’utilisez pas le produit en dehors des limites
de puissance indiquées dans les caractéristiques
techniques.
•N’utilisez pas le produit dans des zones les produits
électroniques ne sont pas autorisés.
•Netentez pas d’ouvrir le produit en cas de
détérioration et cessez de l’utiliser.
•Labatterie est installée de manièrepermanente et ne
peut pas êtreretirée;éliminer l’ensemble du produit
conformément aux dispositions légales.
•Tenez les emballages d’appareils hors de portée des
enfants, risque d’étouffement.
•Recyclez les matériaux d’emballage conformément aux
prescriptions locales en vigueur.
•N’apportez aucune modication au produit. Des
modications vous feraient perdrevos droits de
garantie.
•Nejetez pas la batterie ou le produit au feu.
•Nemodiez pas et/ou ne déformez/chauffez/démontez
pas les batteries/piles.
11
4. Fonctionnement
4.1 Charger le présentateur
Le symbole suivant est aché sur l’écran :
il indique que l’autonomie de la batterie est faible.
Raccordez le câble de charge USB fourni au port micro-
USB (5). Branchez la che libreducâble de charge USB à
un chargeur USB approprié.
Un processus de charge complet prend environ 2heures.
Avertissement -Batterie
Utilisez exclusivement des chargeurs appropriés ou des
connexions USB pour la recharge.
N’utilisez plus de chargeurs ou de ports USB défectueux et
n’essayez pas de les réparer.
Évitez le stockage, le chargement et l’utilisation du
produit àdes températures extrêmes et àdes pressions
atmosphériques extrêmement basses (comme en haute
altitude par exemple).
Rechargez régulièrement (au moins tous les trois mois) si
l’appareil est entreposé pendant une période prolongée.
4.2 Démarrage rapide
1. Branchez le récepteur dans un port USB libredevotre
appareil.
2. Une fois l’installation automatique du pilote terminée,
le support de données amovible s’ouvre
Carte TF Dongle
3. Installez le logiciel Spot-Pointer requis.
4. Une fois l’installation réussie, mettez le présentateur
en marche (7).
Dans la barredes tâches, le symbole suivant apparaît
désormais :
Remarque
Si le présentateur est éteint ou si le récepteur n’est
pas raccordé àl’ordinateur,lesymbole ne comporte
pas de couleurs.
5. Modes de fonctionnement
1. Mode d’éclairage ciblé
2. Fonction loupe
3. Pointeur laser numérique
•Appuyez 2fois sur la touche o(3) pour passer d’un
mode de fonctionnement àl’autre.
•Enmaintenant la pression sur la touche o(3), vous
pouvez, àl’aide des deux touches de fonction (1) et
(2), modier la taille du pointeur laser ainsi que de
l’éclairage ciblé et de la loupe.
12
6. Fonctions logicielles
1. Sélection du réglage du mode de fonctionnement
2. Réglage individuel de la couleur du fond lorsque le
mode d’éclairage ciblé est activé
3. Réglage de la transparence du fond lorsque le mode
d’éclairage ciblé est activé
4. Réglage individuel de la couleur du pointeur
numérique
5. Réglage de la transparence du pointeur numérique
6. Réglage de la taille du mode utilisé
7. Réglage de la fonction zoom de la loupe
8. Minuteur :réglez une durée pour l’alarme vibrante
avant la réunion (durée d’alarme maximale :199
minutes). L’écran vous permet de garder un œil sur la
durée de la présentation.
SIGNAL TACTILE
Recevez une alarme vibrante silencieuse lors de
l’utilisation du minuteur ou si l’autonomie de la
batterie est faible.
9. Logiciel –Choix de la langue
1
2
4
6
8
9
7
5
3
13
7. Soins et entretien
Nettoyez le produit uniquement àl’aide d’un chiffon non
pelucheux légèrement humide vitez tout détergent
agressif.Veillez àcequ’aucun liquide ne pénètredans
le produit.
8. Exclusion de garantie
La société Hama GmbH &CoKGdécline toute
responsabilité en cas de dommages provoqués par
une installation, un montage ou une utilisation non
conformes du produit ou encoreprovoqués par le
non-respect des consignes du mode d’emploi et/ou des
consignes de sécurité.
9. Caractéristiques techniques
Connexion Connexion sans l2,4 GHz
Portée de
fonctionnement
<20m*
Batterie
Li-Ion 3,7 V250
mAh/0,925 Wh
Autonomie de la batterie
(rechargeable) :3mois*
Connexion
Micro-USB pour la fonction
de charge
Alimentation en
électricité
5V
300 mA
Dimensions 130 x22x35 mm
Poids environ 40g
Conguration
système
requise :
Windows 10/8/7
Mac OS X10ou version
ultérieure
Étendue des fonctions
limitées (aucun logiciel)
:Chrome OS™, Linux
®
,
Android™
*en fonction des conditions d’utilisation et de
l’environnement
10. Déclaration de conformité
Le soussigné, Hama GmbH &CoKG, déclare
que l’équipement radioélectrique du type
[00139917] est conforme àladirective
2014/53/UE. Le texte complet de la déclaration UE de
conformité est disponible àl’adresse internet suivante :
www.hama.com ->00139917 -> Downloads.
Bandes de fréquences 2402 –2480 MHz
Puissance de radiofréquence
maximale
-1.8 dBm e.i.r.p.
14
E Instrucciones de uso
Controles
1. Botón "Atrás".Mientras se mantiene pulsado el
botón: pantalla negra
2. Botón "Siguiente"..Mantenga pulsado el
botón parareproducir/pasar la diapositiva
3. Botón :activar hipervínculos. Mantenga pulsado
el botón paracambio de tamaño
Doble clic: cambio del tipo de funcionamiento, ver
"5. Tipos de funcionamiento".
4. Pantalla: visualización del temporizador -Tiempo de
presentación restante
5. Puerto USB
6. Botón del temporizador:paraactivar ymostrar el
temporizador preestablecido. Mantenga pulsado el
botón paravisualizar el temporizador
Doble clic: iniciar el temporizador
7. Interruptor on/off
8. Compartimiento paraelreceptor (Dongle)
9. Ranuraparatarjeta Micro-SD
Le agradecemos que se haya decidido por un producto
de Hama. Tómese tiempo ylea primerolas siguientes
instrucciones eindicaciones. Después, guarde estas
instrucciones de manejo en un lugar seguroparapoder
consultarlas cuando sea necesario. Si vende el aparato,
entregue estas instrucciones de manejo al nuevo
propietario.
1. Explicación de los símbolos de aviso ydelas
indicaciones
Aviso
Se utiliza paraindicar indicaciones de seguridad oparallamar la
atención sobrepeligros yriesgos especiales.
Nota
Se utiliza paraindicar información adicional o
indicaciones importantes.
2. Contenido del paquete
•Presentador de diapositivas digital inalámbrico "Spot-
Pointer 8in1"
•Receptor USB
•Tarjeta Micro-SD con software
•Cable de carga USB
•Bolsa de transporte
•Este manual de instrucciones
3. Indicaciones de seguridad
•Este producto está previsto parausarlo en el ámbito
privado ynocomercial del hogar.
•Noutilice el producto junto asistemas de calefacción,
otras fuentes de calor ni expuesto alaluz solar directa.
•Este producto, como todos los productos eléctricos, no
debe estar en manos de los niños.
•Nodeje caer el producto ni lo someta asacudidas
fuertes.
•Noutilice el producto fueradelos límites de potencia
indicados en los datos técnicos.
•Noutilice el producto en áreas donde no se permitan
aparatos electrónicos.
•Noabraelproducto ni siga utilizándolo en caso de
presentar daños.
•Labatería está instalada de manerapermanente y
no puede retirarse; deseche el producto de manera
íntegradeconformidad con las disposiciones legales
vigentes.
•Mantenga el material de embalaje fueradel alcance
de los niños, ya que existe peligrodeasxia.
•Deseche el material de embalaje de conformidad
con las normativas locales vigentes en materia de
eliminación de desechos.
•Norealice cambios en el producto. Esto conllevaría la
pérdida de todos los derechos de la garantía.
•Noeche la batería oelproducto al fuego.
•Nomodique ni deforme/caliente/desensamble las
pilas recargables/baterías.
15
4. Funcionamiento
4.1 Cargar el presentador Spotlight
Si en la pantalla aparece el siguiente símbolo :
el estado de la batería es bajo. Conecte el cable de carga
USB suministrado al conector Micro-USB (5). Conecte el
conector libredel cable de carga USB auncargador con
USB adecuado.
El proceso completo de carga duraaproximadamente
2horas.
Aviso: batería
Utilice únicamente cargadores adecuados con puertos USB.
No utilice cargadores ni conexiones USB defectuosos;
asimismo, no intente repararlos.
Evite almacenar,cargar ousar las pilas en condiciones
de temperaturaextrema odepresión atmosférica
extremadamente baja como, por ejemplo, agrandes alturas.
Recárguelo con regularidad (al menos cada tres meses) si va
aestar almacenado durante mucho tiempo.
4.2 Inicio rápido
1. Conecte el receptor en un puerto USB libredesu
dispositivo.
2. Después de la instalación automática del controlador,
se abreeldispositivo de almacenamiento extraíble
Tarjeta TF Dongle
3. Instalar el softwarerequerido de Spot-Pointer
4. Encienda el presentador después de instalar el
softwarecon éxito (7).
El siguiente símbolo aparecerá en la barradetareas:
Nota
Si el presentador está apagado oelreceptor no está
conectado al ordenador,elsímbolo aparecerá sin
color.
5. Tipos de funcionamiento
1. Modo de iluminación de puntos
2. Función de lupa
3. Puntero láser digital
•Presione el botón o(3) dos veces paraalternar entre
los modos de función
•Paracambiar el tamaño del punteroláser,elpunto y
la lupa, mantenga pulsado el botón o(3) yuse los dos
botones de función (1) y(2)
16
6. Funciones del software
1. Selección del tipo de función
2. Ajuste individual del sombreado del fondo con el
modo de iluminación de puntos activo
3. Ajustar la transparencia del fondo cuando el modo
de iluminación de puntos está activo
4. Ajuste individual del color del punterodigital
5. Ajuste de la transparencia del punterodigital
6. Ajuste del tamaño del modo utilizado
7. Ajuste de la función de zoom de la lupa
8. Temporizador: Antes de la presentación, puede
establecer un intervalo de tiempo paralaalarma
vibratoria (máximo: 199 minutos) Puede comprobar
el intervalo de la presentación en la pantalla.
RESPUESTA TÁCTIL
Cuando se usa el temporizador ycuando el nivel
de carga de la batería es bajo, la alarma vibratoria
silenciosa le avisa de ello.
9. Software–Selección de idioma
1
2
4
6
8
9
7
5
3
17
7. Mantenimiento ycuidado
Limpie este producto sólo con un paño ligeramente
húmedo sin pelusa ynoutilice ningún producto de
limpieza agresivo, tenga además cuidado de que no
penetreagua en el dispositivo.
8. Exclusión de responsabilidad
La empresa Hama GmbH &CoKGnoseresponsabiliza
ni concede garantía alguna por los daños que se deriven
de una instalación, montaje omanejo incorrectos del
producto opor la inobservancia de las instrucciones de
uso odelas indicaciones de seguridad.
9. Datos técnicos
Conexión
Conexión inalámbrica de
2,4 GHz
Alcance <20m*
Batería
Li-Ion 3.7V 250mAh /
0.925Wh
Duración de la batería
(recargable): 3meses*
Conexión
Micro-USB parafunción
de carga
Alimentación de
corriente
5V
300mA
Tamaño 130 x22x35 mm
Peso aprox. 40g
Requisitos del
sistema
Windows 10 /8/7
Mac OS X10osuperior
Rango limitado de
funciones (sin software):
Chrome OS™, Linux
®
,
Android™
*dependiendo del uso ylas condiciones ambientales
10. Declaración de conformidad
Porlapresente, Hama GmbH &CoKGdeclara
que el tipo de equipo radioeléctrico
[00139917] es conforme con la Directiva
2014/53/UE. El texto completo de la declaración UE de
conformidad está disponible en la siguiente dirección de
Internet:
www.hama.com ->00139917 -> Downloads.
Banda obandas de frecuencia 2402 –2480 MHz
Potencia máxima de
radiofrecuencia
-1.8 dBm e.i.r.p.
18
I Istruzioni per l‘uso
Elementi di comando
1. Tasto “Indietro”,tenendolo premuto: oscura
lo schermo
2. Tasto “Avanti”,tenendolo premuto: riproduce/
chiude la presentazione in PowerPoint
3. Tasto :attiva icollegamenti ipertestuali -
tenendolo premuto: modica la grandezza
Doppio clic: passa da una modalità all’altra, vedereil
paragrafo "5. Modalità”.
4. Display: indicatoredel timer -tempo della
presentazione restante
5. Presa USB
6. Tasto timer:attiva emostrailtimer preimpostato
tenendolo premuto: mostrailtimer
Doppio clic: avvia il timer
7. InterruttoreOn/Off
8. Scomparto per il ricevitore(dongle)
9. Slot per la scheda micro-SD
Grazie per avereacquistato un prodotto Hama! Prima
di iniziareautilizzareilprodotto, si prega di prendersi
il tempo necessario per leggereleistruzioni ele
informazioni descritte di seguito. Custodirequindi il
presente libretto in un luogo sicuroeconsultarlo qualora
si renda necessario. In caso di cessione del l’apparecchio,
consegnareanche il presente libretto al nuovo
proprietario.
1. Spiegazione dei simboli di avvertenza edelle
istruzioni
Attenzione
Contraddistingue le istruzioni di sicurezza orichiama l’attenzione
su particolari rischi epericoli.
Nota
Contraddistingue informazioni supplementari o
indicazioni importanti.
2. Contenuto della confezione
•Presentatoredigitale wireless “Spot-Pointer 8in1”
•RicevitoreUSB
•Scheda micro-SD con software
•Cavo di carica USB
•Custodia per il trasporto
•Ilpresente libretto di istruzioni
3. Istruzioni di sicurezza
•Ilprodotto èprevisto per uso personale, non
commerciale.
•Non collocareilprodotto nelle immediate vicinanze
del riscaldamento, di fonti di caloreoalla luce diretta
del sole.
•Come tutte le apparecchiatureelettriche, tenereil
prodotto fuori dalla portata dei bambini!
•Non far cadereilprodotto enon esporlo aurti.
•Non utilizzareilprodotto oltreilimiti di potenza
indicati nei dati tecnici.
•Non utilizzareilprodotto in ambienti dove non è
consentito l’uso di strumenti elettronici.
•Non aprireilprodotto ecessarne l’utilizzo se presenta
danneggiamenti.
•Labatteria èinstallata ssa enon può essererimossa.
Smaltireilprodotto completo in conformità alle
normative in vigore.
•Tenerel’imballaggio assolutamente fuori dalla portata
dei bambini: pericolo di soffocamento.
•Smaltireimmediatamente il materiale d’imballaggio in
conformità alle prescrizioni locali vigenti.
•Non apportaremodiche al prodotto. In tal caso
decade ogni diritto di garanzia.
•Non gettarelabatteria oilprodotto nel fuoco.
•Non modicaree/o deformare/riscaldare/scomporre
le batterie/pile.
19
4. Funzionamento
4.1 Caricare il presentatore Spotlight
La visualizzazione adisplay del seguente simbolo:
indica che il livello di carica della batteria èbasso.
Collegareilcavo di ricarica USB in dotazione alla presa
micro-USB (5). Collegareilconnettoreliberodel cavo di
ricarica micro-USB auncaricabatteria USB compatibile.
Un processo di ricarica completo richiede circa 2ore.
Nota –batteria
Utilizzaresoltanto caricabatteria oprese USB compatibili.
Non utilizzarecaricabatteria oporte USB guasti enon
effettuaretentativi di riparazione.
Evitarelacustodia, la ricarica el’uso del prodotto
atemperatureestreme eapressioni atmosferiche
estremamente basse (ad esempio ad alte quote).
In caso di inutilizzo prolungato effettuarelaricarica a
intervalli regolari (per lo meno ogni tremesi).
4.2 Avvio rapido
1. Collegareilricevitoreauna presa USB liberadel
proprio dispositivo.
2. Al termine dell’installazione automatica dei driver si
aprel’unità rimovibile
TF cardDongle
3. Installareilsoftwaredello Spot-Pointer
4. Dopo l’installazione, accendereilpresentatore(7).
Nella barradelle applicazioni apparelaseguente
icona:
Nota
Se il presentatorspento oilricevitorenon è
connesso al computer,appareun’icona priva di colore.
5. Modalità
1. Modalità Spot-Illumination
2. Funzione Lente
3. Puntatore laser digitale
•Premendo 2volte il tasto o(3) si passa da una
modalità all’altra
•Tenendo premuto il tasto o(3), tramite idue tasti
funzione (1) e(2) èpossibile modicarelagrandezza
del puntatorelaser,dello spot edella lente
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

Hama 00139917 Návod na obsluhu

Typ
Návod na obsluhu
Táto príručka je tiež vhodná pre