ESAB ESABMig 300i Používateľská príručka

ESABMig 300i
ESAB
Značka
ESAB
Model
ESABMig 300i
Typ
Používateľská príručka

Tento návod je vhodný aj pre

Nižšie nájdete stručné informácie o zariadení ESABMig 300i. Tento zvárací zdroj je vhodný pre MIG/MAG a MMA zváranie. Ponúka vysoký zvárací prúd, rôzne režimy zvárania a jednoduché ovládanie. Vďaka robustnej konštrukcii je vhodný pre profesionálne použitie.

Nižšie nájdete stručné informácie o zariadení ESABMig 300i. Tento zvárací zdroj je vhodný pre MIG/MAG a MMA zváranie. Ponúka vysoký zvárací prúd, rôzne režimy zvárania a jednoduché ovládanie. Vďaka robustnej konštrukcii je vhodný pre profesionálne použitie.

GR
Valid for serial no. 535--xxx--xxxx0459 827 001 GR 051018
ESABMig 300i
Ïäçãßåò ÷ñÞóåùò
-- 2 --
TOCy
Äéáôçñåßôáé ôï äéêáßùìá ôñïðïðïßçóçò ðñïäéáãñáöþí ×ùñßò ðñïåéäïðïßçóç.
1ÏÄÇÃÉÁ 3...........................................................
2 ÁÓÖÁËÅÉÁ 3........................................................
3 ÅÉÓÁÃÙÃÇ 5.........................................................
3.1 Åîïðëéóìüò 5...............................................................
4 ÔÅ×ÍÉÊÁ ÓÔÏÉ×ÅÉÁ 5...............................................
5 ÅÃÊÁÔÁÓÔÁÓÇ 7....................................................
5.1 ÈÝóç 7....................................................................
5.2 Ðáñï÷Þ ñåýìáôïò äéêôýïõ 7.................................................
6 ËÅÉÔÏÕÑÃÉÁ 8......................................................
6.1 ÓõíäÝóåéò êáé äéáôÜîåéò åëÝã÷ïõ 8...........................................
6.2 ¸ëåã÷ïò áíåìéóôÞñá 8......................................................
6.3 Ðñïóôáóßá áðü õðåñèÝñìáíóç 8.............................................
7 ÓÕÍÔÇÑÇÓÇ 8......................................................
7.1 Åðéèåþñçóç êáé êáèáñéóìüò 9...............................................
8 ÅÍÔÏÐÉÓÌÏÓ ÓÖÁËÌÁÔÙÍ 9.......................................
9 ÐÁÑÁÃÃÅËÉÁ ÁÍÔÁËËÁÊÔÉÊÙÍ 10...................................
Ó×ÇÌÁ ÓÕÍÄÅÓÇÓ 12.................................................
ÁÑÉÈÌ¼Ò ÐÁÑÁÃÃÅË¿ÁÒ 14............................................
ÁÎÅÓÏÕÁÑ 15..........................................................
-- 3 --
ba40d1ya
1ÏÄÇÃÉÁ
ÄÇËÙÓÇ ÓÕÌÌÏÑÖÙÓÇÓ
ÇåôáéñåßáESAB AB, Welding Equipment, SE--695 81 Laxå, Óïõçäßá, äçëþíåé üôé ïé ðçãÝò
ñåýìáôïò óõãêüëëçóçò ESABMig 300i áðü ôïí áñ éèìü óåéñÜò 535 êáé Ýðåéôá, óõììïñöþíïíôáé
ìå ôï ðñüôõðá IEC/EN 60974--1 óýìöùíá ìå ôéò áðáéôÞóåéò ôçò ï äçãßáò (73/23/EEG) êáé ôïõ
ðáñáñôÞìáôïò (93/68/EEG) êáé ôï ðñüôõðï IEC/EN 60974--10 óýìöùíá ìå ôéò áðáéôÞóåéò ôçò
ïäçãßáò (89/336/EEG) êáé ôïõ ðáñáñôÞìáôïò (93/68/EEG).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Denis Sharp
Technical Director
ESAB AB, Welding Equipment
SE--695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924
L
axå 2005--10--17
2 ÁÓÖÁËÅÉÁ
Ïé ÷ñÞóôåò áõôüìáôïõ åîïðëéóìïý óõãêüëëçóçò ESAB Ý÷ïõí ôçí ôåëéêÞ åõèýíç íá åîáòöáëßóïõí üôé
ïéïóäÞðïôå åñãÜæåôáé ìå Þ êïíôÜ óôïí åîïðëéóìü ëáìâÜíåé üëá ôá ó÷åôéêá ìÝôñá áóöáëåßáò. Ôá ìÝôñá
áóöÜëåéáò ðñÝðåé íá ðëçñïýí ôéò áðáéôÞóåéò ðïõ ôßèåíôáé ãé’ áõôüí ôïí ôýðï åîïðëéóìïý óõãêïëëçôÞ. Ïé
áêüëïõèåò óõóôÜóåùí ìðïñåß íá èåùñçèåß ùò óõìðëçñùìáôéêü ôùí êáíïíéêþí ðñïäéáãñáöþí ðïõ éó÷ýïõí
ãéá ôïí ôüðï åñãáóßáò.
¼ëåò ïé åñãáóßåò ðñÝðåé íá äéåîÜãïíôáé áðü åêðáéäåõìÝíï ðñïóùðéêü, ðëÞñùò åîïéêåéùìÝíï ìå ôç
ëåéôïõñãßá ôïõ åîïðëéóìïý óõãêïëëçóçò. ¸íáò ëáíèáóìÝíïò ÷åéñéóìüò åíäÝ÷åôáé íá ïäçãÞóåé óå
åðéêßíäõíåò êáôáóôÜóåéò, ïé ïðïßåò ìðïñåß íá ðñïêáëÝóïõí ôñáõìáôé óìü ôïõ ÷åéñéóôÞ êáé æçìéÜ óôïí
åîïðëéóìü.
1. ÊÜèå ðñïóùðéêü, ðïõ ÷ñçóéìïðïéåß ôïí åîïðëéóìü óõãêïëëçôÞ, èá ðñÝðåé íá ãíùñßæåé êáëÜ:
S ôï ÷åéñéóìü ôïõ
S ðïý âñßóêåôáé ï äéáêüðôçò êéíäýíïõ
S ôç ëåéôïõñãßá ôïõ äéáêüðôç
S ôéò éó÷ýïõóåò ðñïäéáãñáöÝò áóöÜëåéáò
S óõãêüëëçóç
2. Ï ÷åéñéóôÞò ðñÝðåé íá åðéâåâáéþíåé üôé:
S êáíÝíá ìç åîïõóéïäïôçìÝíï Üôïìï äåí âñßóêåôáé óôï ÷þñï åñãáóßáò üôáí ôßèåôáé óå ëåéôïõñãßá ï
åîïðëéóìüò.
S êáíÝíá Üôïìï äåí åßíáé áðñïöýëá÷ôï êáôÜ ôç óôéãìÞ ðïõ áíÜâåé ôï öùôåéíü ôüîï.
3. Ï ôüðïò åñãáóßáò ðñÝðåé:
S íá åßíáé êáôÜëëçëïò ãéá ôçí åñãáóßá áõôÞ
S íá ìçí åßíáé åêôåèåéìÝíïò óå ñåýìáôá áÝñá.
4. Ðñïóùðéêüò ðñïóôáôåõôéêüò åîïðëéóìüò.
S ×ñçóéìïðïéåßôå ðÜíôïôå ôïí óõíéóôþìåíï áôïìé êü ðñïóôáôåõôéêü åîïðëéóìü, üðùò ð÷.
ðñïóôáôåõôéêÜ ãõáëéÜ, ðõñßìá÷ï ñïõ÷éóìü, ðñïóôáôåõôéêÜ ãÜíôéá.
S Ìç öïñÜôå ÷áëáñÜ áí ô éêåßìåíá, üðùò ìáíôÞëéá, âñá÷é üëéá, äá÷ôõëßäéá ê.ëð., ôá ïðïßá ìðïñïýí íá
óêáëþóïõí íá ðñïêáëÝóïõí åãêáýìáôá.
5. ÃåíéêÝò ðñïöõëÜîåéò
S Âåâáéùèåßôå üôé ôï êáëþäéï åðéóôñïöÞò åßíáé óõíäåìÝíåò êáëÜ.
S ÅðåìâÜóåéò óå åîïðëéóìü õøçëÞò ôÜóò ðñÝðåé íá ãßíïíôáé ìüíï áðü åéäéêåõìÝíï çëåê ôñïëüãï.
S Ï êáôÜëëçëïò ðõñïóâåóôéêüò åîïðëéóìüò èá ðñÝðåé íá åßíáé óáöþò åðéóçìáóìÝíïò êáé åýêïëá
ðñïóéôüò.
S Ç ëßðáíóç êáé óõíôÞñçóç ôïõ åîïðëéóìïý äåí ðñÝðåé íá äéåîÜãïíôáé åíüóù âñßóêåôáé óå ëåéôïõñãßá.
Ç ESAB ìðïñåß íá óáò åöïäéÜóåé ìå üëá ôá áíáãêáßá ìÝóá ðñïóôáóßáò êáé
åîáñôÞìáôá óõãêüëëçóçò.
-- 4 --
ba40d1ya
ÐÑÏÓÔÁÔÅÕÅÔÅ ÔÏÍ ÅÁÕÔÏ ÓÁÓ ÊÁÉ ÔÏÕÓ ÁËËÏÕÓ !
ÐÑÏÅÉÄÏÐÏÉÇÓÇ
ÓÕÃÊÏËËÇÓÇ ÊÁÉ ÊÏÐÇ ÌÅ ÇËÅÊÔÑÉÊÏ ÔÏÎÏ ÌÐÏÑÅÉ ÍÁ ÐÑÏÊÁËÅÓÏÕÍ
ÔÑÁÕÌÁÔÉÓÌÏ ÓÅ ÁËËÁ ÁÔÏÌÁ. ÍÁ ÅÉÓÔÅ ÐÑÏÓÅ×ÔÉÊÏÉ ÏÔÁÍ ÅÊÔÅËÅÉÔÅ
ÓÕÃÊÏËËÇÓÇ. ÆÇÔÇÓÔÅ ÁÐÏ ÔÏÍ ÅÑÃÏËÏÔÇ ÓÁÓ ÏÇÃÉÅÓ ÁÓÖÁËÏÕÓ ÅÑÃÁÓÉÁÓ, ÏÉ
ÏðÏÉÅÓ ÈÁ ÐÑÅÐÅÉ ÍÁ ÂÁÓÉÆÏÍÔÁÉ ÓÔÏ ÅÃ×ÅÉÑÉÄÉÏ ÁÐÏÖÕÃÇÓ ÊÉÍÄÕÍÙÍ ÔÏÕ
ÊÁÔÁÓÊÅÕÁÓÔÇ.
ÇËÅÊ Ô ÑÏÐ Ë ÇÎÉÁ - Ì ðïñåß íá åß íáé Èáíáôçø üñá.
S ÅãêáôáïôÞóôå êáé ãåéùïôå ôç óõóêåõÞ óõãêüëëçóçò óýìöùíá ìå ôá áíôßóôïé÷á õðïäåßãìáôá.
S Ìçí áããßæåôå çëåêôñïöüñá ìÝñç Þ çëåêôñüäéá ìå óêÜëõðôç åðéäåñìßäá, õãñÜ ãÜíôéá Þ õãñü
ñïõ÷éóìü.
S Ìïíþóôå ôï óþìá óáò áðü ôç ãåßùóç êáé ôï ôåìÜ÷éï åñãáóßáò.
S Âåâáéùèåßôå üôé ï ôüðïò åñãáóßáò óáò åßíáé áóöáëÞò.
ÁÍÁÈÕÌÉÁÓ ÅÉÓ Ê ÁÉ Á ÅÑÉÁ - Ì ðïñåß íá åßíáé åðéêßíäõíá ãéá ôç í õãåßá óáò.
S Å÷åôå ôï ðñüóùðü óáò ìáêñéÜ áðü ôéò áíáèõìéÜóåéò óõãêüëëçóçò.
S Åîáóöáëßóôå êáëü åîáåñéóìü êáé áðïññüöçóç áíáèõìéÜóåùí óõãêüëëçóçò êáé áåñßùí, ô üóï
óôïí ôüðï åñãáóßáò óáò üóï êáé ôùí Üëëùí.
ÁÊ Ô ÉÍÏÂÏË É Á Ô ÏÎÏÕ - Ì ðïñåß í á ôñáõ ìáôßó å é ôá ìÜôéá ê áé í á ðñïêáë Ýó åé äåñìáô éê Ü
åãêáýìáôá.
S ÐñïóôáôÝøôå ôá ìÜôéá êáé ôï óþìá óáò. ×ñçóéìïðïéåßôå êáôÜëëçëï êñÜíïò óõãêüëëçóçò êáé
öáêïýò ìå ößëôñï, êáé öïñÜôå ðñïóôáô åõôßêü ñïõ÷óìü.
S Ðñïóôáôåýåôå ôñßôá ðñüóùðá ìå êáôÜëëçëá äéáöñÜãìáôá Þ ðåôÜóìáôá.
ÊÉÍÄÕÍÏÓ ÐÕÑÊÁÃÉÁÓ
S Ïé óðßèåò óõãêüëëçóçò ìðïñåß íá ðñïêáëÝóïõí ðõñêáãéÜ. Óõíåþò âåâáùèåßôå üôé äåí õðÜ÷ïõí
ðëçóßïí óáò åýöëåêôá õëéêÜ.
ÈÏÑÕÂÏÓ - Õðå ñâ ïë éê üò èüñõâ ïò ìðïñåß í á â ë Ü ø åé ôçí áêïÞ
S Ðñïóôáôåýåôå ôá áõôéÜ óáò. ×ñçóéìïðïéåßôå ùôáóðßäåò Þ Üëëï ìÝóï ðñïóôáóßáò ôçò áêïÞò.
S Ðñïåéäïðïéåßóôå ôïõò ðáñåõñéóêüìåíïõò ãéá ôïõò êéíäýíïõò.
ÄÕÓËÅÉÔÏÕÑÃÉÁ - Óå ðåñßðôùóç äõóëåéôïõñãßáò æçôÞóôå â ïÞèåéá áðü åéäéêü.
ÄÉÁÂÁÓÔÅ ÊÁÉ ÊÁÔÁÍÏÇÓÔÅ ÔÉÓ ÏÄÇÃÉÅÓ ÔÏÕ ÅÃ×ÅÉÑÉÄÉÏÕ ÐÑÉÍ ÁÐÏ ÔÇÍ
ÅÃÊÁÔÁÓÔÁÓÇ ¹ ×ÑÇÓÉÌÏÐÏÉÇÓÇ.
ÐÑÏÅÉÄÏÐÏÉÇÓÇ!
ÄéáâÜóôå êáé êáôáíïÞóôå ôéò ïäçãßåò ôïõ åã÷åéñéäßïõ
ðñéí áðü ôçí åãêáôÜóôáóç Þ ÷ñçóéìïðïßçóç.
Ìçí ÷ñçóéìïðïéåßôå ôçí ðçãÞ ñåýìáôïò ãéá îåðÜãùìá ðáãùìÝíùí óùëÞíùí
ÐÑÏÅÉÄÏÐÏÉÇÓÇ!
Áõôü ôï ðñïúüí ðñïïñßæåôáé áðïêëåéóôéêÜ ãéá óõãêüëëçóç ôüîïõ.
-- 5 --
ba40d1ya
Ìçí áðïññßðôåôå åßäç çëåêôñéêïý åîïðëéóìïý ìáæß ìå êïéíÜ áðïññßììáôá!
Ôçñþíôáò ôçí ÅõñùðáÚêÞ ïäçãßá 2002/96/EK ó÷åôéêÜ ìå ôá áðüâëçôá åéäþí
çëåêôñéêïý êáé çëåêôñïíéêïý åîïðëéóìïý êáé ôçí åöáñìïãÞ ôçò óýìöùíá ìå ôçí
åèíéêÞ íïìïèåóßá, ôá åßäç çëåêôñéêïý åîïðëéóìïý ðïõ Ý÷ïõí ïëïêëçñþóåé ôïí êýêëï
ôçò æùÞò ôïõò ðñÝðåé íá óõëëÝãïíôáé ÷ùñéóôÜ êáé íá åðéóôñÝöïíôáé óå
ðåñéâáëëïíôéêÜ óõìâáôÞ åãêáôÜóôáóç áíáêýêëùóçò. Ùò éäéïêôÞôçò ôïõ åîïðëéóìïý,
èá ðñÝðåé íá åíçìåñþíåóôå áðü ôïí ôïðéêü áíôéðñüóùðü ìáò ôó åãêåêñéìÝíá
óõóôÞìáôá óõëëïãÞò.
Ìå ôçí åöáñìïãÞ áõôÞò ôçò ÅõñùðáúêÞò ïäçãßáò âåëôþíåôáé ôï ðåñéâÜëëïí êáé ç
õãåßá ôïõ áíèñþðïõ!
3ÅÉÓÁÃÙÃÇ
Ôï ESABMig 300i åßíáé ðçãÞ ñåýìáôïò óõãêüëëçóçò MIG/MAG, ðïõ ìðïñåß íá
÷ñçóéìïðïéçèåß åðßóçò ãéá óõãêüëëçóç MMA. Ç ðçãÞ ñåýìáôïò ÷ñçóéìïðïéåßôáé
óå óõíäõáóìü ìå ôç ìïíÜäá ôñïöïäüôçóçò óýñìáôïò ESABFeed 30L--4i.
¼ëåò ïé ñõèìßóåéò ãßíïíôáé áðü ôç ìïíÜäá ôñïöïäüôçóçò óýñìáôïò.
ÂëÝðå óåëßäá 15 ãéá ëåðôïìÝñåéåò ôùí åîáñôçìÜôùí ÅSAB ãéá ôï ðñïúüí.
3.1 Åîïðëéóìüò
ÇðçãÞñåýìáôïòESABMig 300i ðáñáäßäåôáé ìå êáëþäéï åðéóôñïöÞò ìÞêïõ ò 5 m
êáé åã÷åéñßäéï ïäçãéþí.
4 ÔÅ×ÍÉÊÁ ÓÔÏÉ×ÅÉÁ
ESABMig 300i
ÔÜóç äéêôýïõ 400 V, ±10%, 3∼ 50/60 Hz
Ðñùôåýïí ñåýìá
I
ìÝã
MIG/MAG
I
ìÝã
MMA
21 A
23 A
ÆÞôçóç éó÷ýïò åí êåíþ óå ëåéôïõñãßá ìå
åîïéêïíüìçóç åíÝñãåéáò, 6,5 min ìåôÜ ôç
óõãêüëëçóç
30 W
Ðåñéï÷Þ ñýèìéóçò
MIG/MAG
MMA
8-48 V / 16-300 A
16-300 A
Åðéôñåðüìåíï öïñôßï ìå MIG/MAG
êýêëïò åñãáóßáò 35%
êýêëïò åñãáóßáò 60%
êýêëïò åñãáóßáò 100%
300 A / 29 V
240 A / 26 V
200 A / 24 V
Åðéôñåðüìåíï öïñôßï ìå MMA
êýêëïò åñãáóßáò 30%
êýêëïò åñãáóßáò 60%
êýêëïò åñãáóßáò 100%
300 A / 32 V
230 A / 29,2 V
190 A / 27,6 V
ÓõíôåëåóôÞò éó÷ýïò ìå ìÝãéóôï ñåýìá
MIG/MAG
MMA
0,70
0,73
Âáèìüò áðüäïóçò ìå ìÝãéóôï ñåýìá
MIG/MAG
MMA
84 %
83 %
-- 6 --
ba40d1ya
ESABMig 300i
ÔÜóç áíïé÷ ôïý êõêëþìáôïò
MIG/MAG
MMA
70 - 80 V
57 - 67 V
Èåñìïêñáóßá ëåéôïõñãßáò -10 Ýùò +40˚C
Óõíå÷Þò Á-óôáèìéóìÝíç ç÷çôéêÞ ðßåóç <70dB
ÄéáóôÜóåéò ìÞêïò x ðëÜôïò x ýøïò 652 x 249 x 423 mm
ÂÜñïò 26,5 kg
Êáôçãïñßá ìüíùóçò ìåôáó÷çìáôéóôÞò H
ÊëÜóç ðåñéâëÞìáôïò ðñïóôáóßáò IP23C
ÊëÜóç åöáñìïãÞò
Êýêëïò åñãáó
ß
áò
Ï óõíôåëåóôÞò äéáëåßðïõóáò ëåéôïõñãßáò ðñïóäéïñßæåé ôïí ÷ñüíï ùò åêáôïóôéáßï ðïóïóôü ÷ñïíé
ê
äéáóôÞìáôïò äÝêá ëåðôþí êáôÜ ôç äéÜñêåéá ôïõ ïðïßïõ ìðïñåßôå íá óõãêïëëÞóåôå ìå óõãêåêñéìÝ
í
öïñôßï
ÊëÜóç ðåñéâëÞìáôïò ðñïóôáóßáò
ÏêþäéêáòÉÑ äåß÷íåé ôçí êëÜóç ðåñéâëÞìáôïò ðñïóôáóßáò, äçëáäÞ ôï âáèìü ðñïóôáóßáò áðü
äéåßóäõóç óôåñåí õëéêþí Þ íåñý . Ìéá óõóêåõÞ ðïõ öÝñåé ôï óýìâïëï IP23 åßíáé ó÷åäéáóìÝíç
ãéá ÷ñÞóç óå åóùôåñéêü êáé åîùôåñéêü ÷þñï.
ÊëÜóç åöáñìïãÞò
Ôï óýìâïëï óçìáßíåé üôé ç ðçãÞ ñåýìáôïò åßíáé êáôáóêåõáóìÝíç ãéá ÷ñÞóç óå ÷þñïõò ìå
õøçëü ðïóïóôü çëåêôñéêïý êéíäýíïõ.
-- 7 --
ba40d1ya
5 ÅÃÊÁÔÁÓÔÁÓÇ
Ç åãêáôÜóôáóç ðñÝðåé íá åêðåëåßôáé áðü åðáããåëìáôßá.
ÐÑÏÅÉÄÏÐÏÉÇÓÇ!
Áõôü ôï ðñïúüí ðñïïñéæìÝíï ãéá âéïìç÷áíéêÞ ÷ñÞóç. Óå ïéêéáêü ðåñéâÜëëïí ôï ðñïúüí ìðïñåß
íá ðñïêáëÝóåé ñáäéïðáñÜóéôá. Ï ÷ñÞóôçò Ý÷åé áðïêëåéóôéêÞ åíèýíç ãéá ôç ëÞøç åðáñêþí
ðñïëçðôéêþí ìÝôñùí.
5.1 ÈÝóç
ÔïðïèåôÞóôå ôçí ðçãÞ ñåýìáôïò óõãêüëëçóçò Ýôóé þóôå íá ìç öñÜæïíôáé ïé
åßóïäïé êáé Ýîïäïé ôïõ áÝñá øýîçò.
5.2 Ðáñï÷Þ ñåýìáôïò äéêôýïõ
ÅëÝãîôå áí ç ðçãÞ ñåýìáôïò óõãêüëëçóçò åßíáé
óõíäåäåìÝíç ìå ôç óùóôÞ ôÜóç ðáñï÷Þò ñåýìáôïò äéêôýïõ
êáé áí ðñïóôáôåýåôáé ìå ôï óùóôü ìÝãåèïò áóöÜëåéáò.
ÐñÝðåé íá ãßíåôáé óýíäåóç ãåßùóçò ðñïóôáóßáò óýìöùíá ìå
ôïõò êáíïíéóìïýò.
Ðéíáêßäá ïíïìáóôéêþí ÷áñáêôçñéóôéêþí ìå óôïé÷åßá óýíäåóçò ðáñï÷Þò
Óõíéóôþìåíá ìåãÝèç áóöÜëåéáò êáé åëÜ÷éóôç äéáôïìÞ êáëùäßïõ
ESABMig 300i
MIG/MAG MMA
ÔÜóç äéêôýïõ 400 V 3µ 50 Hz 400 V 3µ 50 Hz
ÄéáôïìÞ êáëùäßïõ äéêôýïõ óå mm
2
4G2,5 4G2,5
Ñåýìá öÜóçò, IRMS 13 A 14 A
ÁóöÜëåéá
Ðñïóôáóßáò áðü õðÝñôáóç
Ôýðïõ C MCB
16 A
20 A
16 A
20 A
Óçìåßùóç! Ïé äéáôïìÝò ôïõ êáëùäßïõ äéêôýïõ êáé ôá ìåãÝèç áóöáëåéþí ðïõ áíáöÝñïíôáé
ðáñáðÜíù åßíáé óýìöùíá ìå ôïõò óïõçäéêïýò êáíïíéóìïýò. ×ñçóéìïðïéÞóôå ôçí ðçãÞ ñåýìáôïò
óõãêüëëçóçò óýìöùíá ìå ôïõò ó÷åôéêïýò åèíéêïýò êáíïíéóìïýò.
Óçìåßùóç! ÁõôÞ ç ðçãÞ ñåýìáôïò óõãêüëëçóçò åßíáé ó÷åäéáóìÝíç ãéá óýíäåóç
óå óýóôçìá ôåóóÜñùí áãùãþí ìå ôÜóç 230/400 Volt.
ÅÜí ç ðçãÞ ñåýìáôïò ðñüêåéôáé íá ÷ñçóéìïðïéçèåß óå ÷þñá ìå õøçëüôåñç ôÜóç
äéêôýïõ, ç óýíäåóç ôçò ðçãÞò ñåýìáôïò ðñÝðåé íá ãßíåôáé ìÝóù ìåôáó÷çìáôéóôÞ
áóöáëåßáò.
-- 8 --
ba40d1ya
6ËÅÉÔÏÕÑÃÉÁ
ÃåíéêÝò ïäç ãßåò áóöáëåßáò üóïí áöïñÜ ôï ÷åéñéóìü ôïõ åîïðëéóìïý
õðÜñ÷ïõí óôç óåëßäá 3. ÄéáâÜóôå ôéò ðñéí áñ÷ßóåôå íá ÷ñçóéìïðïéÞóåôå
ôïí åîïðëéóìü.
6.1 ÓõíäÝóåéò êáé äéáôÜîåéò åëÝã÷ïõ
1 Óýíäåóç ãéá ìïíÜäá øýîçò, ìïíÜäá
ôñïöïäüôçóçò óýñìáôïò Þ ìïíÜäá
ôçëååëÝã÷ïõ
3 Óýíäåóç ãéá êáëþäéï ñåýìáôïò
óõãêüëëçóçò (+)
(óõãêüëëçóç MMA)
2 Óýíäåóç ãéá êáëþäéï åðéóôñïöÞò (-) 4 Äéáêüðôçò ôÜóçò äéêôýïõ 1 / 0
6.2 ¸ëåã÷ïò áíåìéóôÞñá
Ç ðçãÞ ñåýìáôïò äéáèÝôåé ÷ñïíïäéáêüðôç ï ïðïßïò èÝôåé åêôüò ëåéôïõñãßáò ôïõò
áíåìéóôÞñåò 6,5 ëåðôÜ ìåôÜ ôç äéáêïðÞ ôçò óõãêüëëçóçò, ïðüôå ç ìïíÜäá
ìåôáöÝñåôáé óå ëåéôïõñãßá åîïéêïíüìçóçò åíÝñãåéáò. Ïé á íåìéóôÞñåò îåêéíïýí
ðÜëé üôáí áñ÷ßæåé åê íÝïõ ç óõãêüëëçóç.
Ïé áíåìéóôÞñåò ëåéôïõñãïýí ìå ìåéùìÝíç ôá÷ýôçôá ãéá ñåýìáôá óõãêüëëçóçò
Ýùò 110 A êáé ìå ðëÞñç ôá÷ýôçôá ãéá õøçëüôåñá ñåýìáôá.
6.3 Ðñïóôáóßá áðü õðåñèÝñìáíóç
Ç ðçãÞ ñåýìáôïò óõãêüëëçóçò Ý÷åé ðñïóôáóßá áðü õðåñèÝñìáíóç, ç ïðïßá
ëåéôïõñãåß åÜí ç èåñìïêñáóßá ãßíåé ðïëý õøçëÞ. ¼ôáí óõìâáßíåé áõôü, ôï ñåýìá
óõãêüëëçóçò äéáêüðôåôáé êáé óôïí ðßíáêá åëÝã÷ïõ åìöáíßæåôáé êùäéêüò
óöÜëìáôïò ãéá ôç ìïíÜäá ôñïöïäüôçóçò óýñìáôïò.
Ç ðñïóôáóßá áðü õðåñèÝñìáíóç åðáíáöÝñåôáé áõôïìÜôùò üôáí ðÝóåé ç
èåñìïêñáóßá.
7 ÓÕÍÔÇÑÇÓÇ
Ç ôáêôéêÞ óõíôÞñçóç åßíáé óçìáíôéêÞ ãéá áóöáëÞ, áîéüðéóôç ëåéôïõñãßá.
Ç óõíôÞñçóç ðñÝðåé íá ãßíåôáé áðü åðáããåëìáôßá.
Ìüíï ôá Üôïìá ðïõ Ý÷ïõí êáôÜëëçëåò çëåêôñéêÝò ãíþóåéò (åîïõóéïäïôçìÝíï
ðñïóùðéêü) åðéôñÝðåôáé íá áöáéñïýí ôéò ðéíáêßäåò áóöáëåßáò.
-- 9 --
ba40d1ya
Óçìåßùóç!
¼ëåò ïé åããõÞóåéò ðïõ áíáëáìâÜíïíôáé áðü ôïí ðñïìçèåõôÞ ðáýïõí íá éó÷ýïõí
åÜí ï ðåëÜôçò ï ßäéïò åðé÷åéñåß ïðïéáäÞðïôå åñãáóßá óôï ðñïúüí êáôÜ ôï
÷ñïíéêü äéÜóôçìá ôçò åããýçóçò ãéá íá åðéóêåõÜóåé ïðïéáäÞðïôå óöÜëìáôá.
7.1 Åðéèåþñçóç êáé êáèáñéóìüò
ÅëÝã÷åôå ôáêôéêÜ üôé ç ðçãÞ ñåýìáôïò óõãêüëëçóçò äåí åßíáé öñáãìÝíç ìå
ñýðïõò.
Ç óõ÷íüôçôá êáé ïé ìÝèïäïé êáèáñéóìïý ðïõ åöáñìüæïíôáé åîáñôþíôáé áðü: ôç
äéåñãáóßá óõãêüëëçóçò, ôïõò ÷ñüíïõò ôüîïõ, ôç èÝóç êáé ôï ðåñéâÜëëïí.
ÓõíÞèùò åßíáé áñêåôü íá áðïìáêñýíåôáé ç óêüíç áðü ôçí ðçãÞ ñåýìáôïò ìå
öýóçìá ìå ÷ñÞóç îçñïý ðåðéåóìÝíïõ áÝñá (ìåéùìÝíç ðßåóç) ìßá öïñÜ ôï ÷ñüíï.
Áëëéþò, ïé ìðëïêáñéóìÝíåò Þ öñáãìÝíåò åßóïäïé êáé Ýîïäïé ðñïêáëïýí
õðåñèÝñìáíóç.
8 ÅÍÔÏÐÉÓÌÏÓ ÓÖÁËÌÁÔÙÍ
ÄïêéìÜóôå áõôïýò ôïõò óõíéóôþìåíïõò åëÝã÷ïõò êáé åðéèåùñÞóåéò ðñïôïý
êáëÝóåôå åîïõóéïäïôçìÝíï ôå÷íéêü óÝñâéò.
Ôýðïò óöÜëìáôïò ÅíÝñãåéá
Äåí äçìéïõñãåßôáé ôüîï. S ÅëÝãîôå áí ï äéáêüðôçò ðáñï÷Þò ñåýìáôïò äéêôýïõ åßíáé
åíôüò.
S ÅëÝãîôå áí ôá êáëþäéá ðáñï÷Þò êáé åðéóôñïöÞò
ñåýìáôïò óõãêüëëçóçò åßíáé óùóôÜ óõíäåäåìÝíá.
S ÅëÝãîôå áí Ý÷åé ñõèìéóôåß ç óùóôÞ ôéìÞ ñåýìáôïò.
Ôï ñåýìá óõãêüëëçóçò
äéáêüðôåôáé êáôÜ ôç
óõãêüëëçóç.
S ÅëÝãîôå áí ëåéôïýñãçóå ç ðñïóôáóßá áðü õðåñèÝñìáíóç
(óôïí ðßíáêá åëÝã÷ïõ åìöáíßæåôáé êùäéêüò óöÜëìáôïò
E6).
S ÅëÝãîôå ôéò áóöÜëåéåò ôçò ðáñï÷Þò ñåýìáôïò äéêôýïõ.
Ç ðñïóôáóßá áðü
õðåñèÝñìáíóç êÜíåé óõ÷íÜ
äéáêïðÝò.
S Âåâáéùèåßôå üôé äåí õðåñâáßíåôå ôéò ïíïìáóôéêÝò ôéìÝò
ôçò ðçãÞò ñåýìáôïò óõãêüëëçóçò (äçëáäÞ üôé ç ìïíÜäá
äåí õðåñöïñôßæåôáé).
ÊáêÞ åðßäïóç óõãêüëëçóçò. S ÅëÝãîôå áí ôá êáëþäéá ðáñï÷Þò êáé åðéóôñïöÞò
ñåýìáôïò óõãêüëëçóçò åßíáé óùóôÜ óõíäåäåìÝíá.
S ÅëÝãîôå áí Ý÷åé ñõèìéóôåß ç óùóôÞ ôéìÞ ñåýìáôïò.
S ÅëÝãîôå áí ÷ñçóéìïðïéåßôáé ôï óùóôü óýñìá.
S ÅëÝãîôå ôéò áóöÜëåéåò ôçò ðáñï÷Þò ñåýìáôïò äéêôýïõ.
-- 1 0 --
ba40d1ya
9 ÐÁÑÁÃÃÅËÉÁ ÁÍÔÁËËÁÊÔÉÊÙÍ
Tá ESABMig 300i åßíáé êáôáóêåõáóìÝíá êáé äéêìáóìÝíá óýìöùíá ìå ôá äéåèíÞ
êáé åíñùðá ÚêÜ óôÜíôáñ ÉÅC/ÅÍ 60974--1 êáé ÅN 60974--10) Aöïý ãßíåé óõíôÞñçóç
Þ åðéóêåõÞ õðÜñ÷åé õðï÷ñÝùóç åê ìÝñïõò ôïõ óõíôçñçôÞ íá âåâáéùèåß üôé ôï
ðñïúüí äåí ðáñåêëßíåé áðü ôéò ðáñáðÜíù áíáöåñüìåíåò óôáèåñÝò.
Ç åðéóêåõÞ êáé ç åñãáóßá óôï çëåêôñéêü ìÝñïò èá ðñÝðåé íá ãßíïíôáé áðü
åîïõóéïäïôçìÝíï ôå÷íéêü óÝñâéò ôçò ESAB.
×ñçóéìïðïéåßôå ìüíï ãíÞóéá áíôáëëáêôéêÜ êáé öèåéñüìåíá ìÝñç ôçò ESAB.
ÁíôáëëáêôéêÜ ìðïñïýí íá ðáñáããÝëëïíôáé ìÝóù ôïõ ðëçóéÝóôåñïõ ó’ åóÜò
áíôéðñïóþðïõ ôçò ESAB, âëÝðå ôçí ôåëåõôáßá óåëßäá áõôÞò ôçò äçìïóßåõóçò.
-- 1 1 --
p
Edition 051018
Ó÷Þìá óýíäåóçò Ó×Ç ÌÁ ÓÕ ÍÄÅÓÇ Ó
-- 1 2 --
ba40e
Edition 051018
-- 1 3 --
ba40e
ESABMig 300i
Edition 051018
Áñéèìüò ðáñáããåëßáò ÁÑÉÈÌ¼Ò ÐÁÑÁÃÃÅË¿ÁÒ
-- 1 4 --
ba40oesab
Ordering no. Denomination Type
0459 740 880 Welding power source ESABMig 300i
0459 827 990 Spare parts list ESABMig 300i
The spare parts list is available on the Internet at www .esab.com
Under ”Products” and ”Welding & cutting equipment”, you will find a link to the page where you can
both search for and download instruction manuals and spare parts lists.
ESABMig 300i
Edition 051018
Aîåóïõáñ ÁÎÅÓÏÕÁÑ
-- 1 5 --
ba40a
Cooling unit 0459 800 880
Return cable 5m70mm
2
................. 0156 743 907
Connection set 50mm
2
1.7m ....................................
5m......................................
10m.....................................
15m.....................................
Connection set water 50mm
2
1.7m ....................................
5m......................................
10m.....................................
15m.....................................
0456 528 580
0456 528 581
0456 528 582
0456 528 583
0456 528 590
0456 528 591
0456 528 592
0456 528 593
Remote control adapter RA12 12pole .....
For analogue remote controls to CAN based
equipment.
0459 491 910
RemotecontrolunitMTA1CAN ...........
MIG/MAG: wire feed speed and voltage MMA:
current and arc force
TIG: current, pulse and background current
0459 491 880
RemotecontrolunitM110ProgCAN.......
Choice of on of 10 programs
MIG/MAG: voltage deviation
TIG and MMA: current deviation
0459 491 882
RemotecontrolunitAT1CAN .............
MMA and TIG: current
0459 491 883
ESABMig 300i
Edition 051018
-- 1 6 --
ba40a
RemotecontrolunitAT1CFCAN ..........
MMA and TIG: rough and fine setting of
current.
0459 491 884
Remote control cable 12 pole -- 4 pole
5m......................................
10m.....................................
15m.....................................
25m ....................................
0.25m ..................................
0459 554 880
0459 554 881
0459 554 882
0459 554 883
0459 554 884
Welding torch
Ordering no. Max welding current
W
i
Type
Hose length Shielding gas
Wire
d
i
m
e
n
s
i
o
n
s
y
p
3m 4.5 m CO
2
Mix Ar
d
i
m
e
n
s
i
o
n
s
PSF 250 0368 100 882 0368 100 883 250A 60% 225A 60% 0.6 -- 1.0
PSF 250 C 0468 410 882 0468 410 883 250A 60% 225A 60% 0.6 -- 1.0
PSF 305 0458 401 880 0458 401 881 315A 60% 285A 60% 0.8 -- 1.2
PSF 315 CLD 0468 410 885 0468 410 886 315A 60% 285A 60% 0.8 -- 1.2
PSF 405 0458 401 882 0458 401 883 380A 60% 325A 60% 0.8 -- 1.6
PSF 405 C 0458 499 882 0458 499 883 380A 60% 325A 60% 1.0 -- 1.6
PSF 405 RS3 0458 401 892 0458 401 893 380A 60% 325A 60% 0.8 -- 1.6
PSF 405 C RS3 -- 0458 499 889 380A 60% 325A 60% 1.0 -- 1.6
PSF 410 CW 0458 450 880 0458 450 881 380A 100% 325A 100% 0.8 -- 1.6
PSF 410 W 0458 400 882 0458 400 883 400A 100% 350A 100% 0.8 -- 1.6
PSF 410 CW RS3 0458 450 884 0458 450 885 380A 100% 325A 100% 0.8 -- 1.6
PSF 410 W RS3 0458 400 898 0458 400 899 400A 100% 350A 100% 0.8 -- 1.6
= Self cooled
C = Smoke exhausters, Centrovac
LD = Smaller, Light duty
W = Water cooled
RS3 = 3--step program switch for selecting preset programs.
-- 1 7 --
p
-- 1 8 --
p
-- 1 9 --
p
ESAB AB
SE--695 81 LAXÅ
SWEDEN
Phone +46 584 81 000
www.esab.co m
041227
ESAB subsidiaries and representative offices
Europe
AUSTRIA
ESAB Ges.m.b.H
Vienna--Liesing
Tel: +43 1 888 25 11
Fax: +43 1 888 25 11 85
BELGIUM
S.A. ESAB N.V.
Brussels
Tel: +32 2 745 11 00
Fax: +32 2 745 11 28
THE CZECH REPUBLIC
ESAB V AMBERK s.r .o.
Prague
Tel: +420 2 819 40 885
Fax: +420 2 819 40 120
DENMARK
Aktieselskabet ESAB
Copenhagen--Valby
Tel:+4536300111
Fax:+4536304003
FINLAND
ESAB Oy
Helsinki
Tel: +358 9 547 761
Fax: +358 9 547 77 71
FRANCE
ESAB France S.A.
Cergy Pontoise
Tel:+33130755500
Fax:+33130755524
GERMANY
ESAB GmbH
Solingen
Tel: +49 212 298 0
Fax: +49 212 298 218
GREAT BRITAIN
ESAB Group (UK) Ltd
Waltham Cross
Tel: +44 1992 76 85 15
Fax: +44 1992 71 58 03
ESAB Automation Ltd
Andover
Tel: +44 1264 33 22 33
Fax: +44 1264 33 20 74
HUNGARY
ESAB Kft
Budapest
Tel:+3612044182
Fax:+3612044186
ITALY
ESAB Saldatura S.p.A.
Mesero (Mi)
Tel:+3902979681
Fax:+390297289181
THE NETHERLANDS
ESAB Nederland B.V.
Utrecht
Tel: +31 30 2485 377
Fax: +31 30 2485 260
NORWAY
AS ESAB
Larvik
Tel:+4733121000
Fax:+4733115203
POLAND
ESAB Sp.zo.o.
Katowice
Tel: +48 32 351 11 00
Fax: +48 32 351 11 20
PORTUGAL
ESAB Lda
Lisbon
Tel: +351 8 310 960
Fax: +351 1 859 1277
SLOVAKIA
ESAB Slovakia s.r.o.
Bratislava
Tel:+421744882426
Fax:+421744888741
SPAIN
ESAB Ibérica S.A.
Alcalá de Henares (MADRID)
Tel: +34 91 878 3600
Fax: +34 91 802 3461
SWEDEN
ESAB Sverige AB
Gothenburg
Tel:+4631509500
Fax:+4631509222
ESAB International AB
Gothenburg
Tel:+4631509000
Fax:+4631509360
SWITZERLAND
ESAB AG
Dietikon
Tel: +41 1 741 25 25
Fax: +41 1 740 30 55
North and South America
ARGENTINA
CONARCO
Buenos Aires
Tel: +54 11 4 753 4039
Fax: +54 11 4 753 6313
BRAZIL
ESAB S.A.
Contagem--MG
Tel: +55 31 2191 4333
Fax: +55 31 2191 4440
CANADA
ESAB Group Canada Inc.
Missisauga, Ontario
Tel: +1 905 670 02 20
Fax: +1 905 670 48 79
MEXICO
ESAB Mexico S.A.
Monterrey
Tel: +52 8 350 5959
Fax: +52 8 350 7554
USA
ESAB Welding & Cutting Products
Florence, SC
Tel: +1 843 669 44 11
Fax: +1 843 664 57 48
Asia/Pacific
CHINA
Shanghai ESAB A/P
Shanghai
Tel: +86 21 5308 9922
Fax: +86 21 6566 6622
INDIA
ESAB India Ltd
Calcutta
Tel: +91 33 478 45 17
Fax: +91 33 468 18 80
INDONESIA
P.T. ESABindo Pratama
Jakarta
Tel: +62 21 460 0188
Fax: +62 21 461 2929
JAPAN
ESAB Japan
Tokyo
Tel: +81 3 5296 7371
Fax: +81 3 5296 8080
MALAYSIA
ESAB (Malaysia) Snd Bhd
Shah Alam Selangor
Tel: +60 3 5511 3615
Fax: +60 3 5512 3552
SINGAPORE
ESAB Asia/Pacific Pte Ltd
Singapore
Tel:+6568614322
Fax: +65 6861 31 95
SOUTH KOREA
ESAB SeAH Corporation
Kyungnam
Tel: +82 55 269 8170
Fax: +82 55 289 8864
UNITED ARAB EMIRATES
ESAB Middle East FZE
Dubai
Tel: +971 4 887 21 11
Fax: +971 4 887 22 63
Representative offices
BULGARIA
ESAB Representative Office
Sofia
Tel/Fax: +359 2 974 42 88
EGYPT
ESAB Egypt
Dokki--Cairo
Tel: +20 2 390 96 69
Fax: +20 2 393 32 13
ROMANIA
ESAB Representative Office
Bucharest
Tel/Fax: +40 1 322 36 74
RUSSIA--CIS
ESAB Representative Office
Moscow
Tel:+70959379820
Fax: +7 095 937 95 80
ESAB Representative Office
St Petersburg
Tel:+78123254362
Fax: +7 812 325 66 85
Distributors
For addresses and phone
numbers to our distributors in
other countries, please visit our
home page
www.esab.co m
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

ESAB ESABMig 300i Používateľská príručka

ESABMig 300i
ESAB
Značka
ESAB
Model
ESABMig 300i
Typ
Používateľská príručka
Tento návod je vhodný aj pre

Nižšie nájdete stručné informácie o zariadení ESABMig 300i. Tento zvárací zdroj je vhodný pre MIG/MAG a MMA zváranie. Ponúka vysoký zvárací prúd, rôzne režimy zvárania a jednoduché ovládanie. Vďaka robustnej konštrukcii je vhodný pre profesionálne použitie.

Stiahnite si PDF
správa

Súvisiace články