Philips HP6495/00 Používateľská príručka

Satinelle Ice

Limited Edition

HP6496, HP6495

2

3

1

4

HP6496, HP6495

ENGLISH 6

 17

 30

 41

 52

 63

 74

 87

6

Introduction

With your new Satinelle ICE you can remove unwanted hairs quickly,

easily and effectively. The combination of the new ceramic epilating system

with the contour-following skin cooler and the massaging system

constitutes a revolution in epilation. Thanks to the natural numbing effect

of ice and massaging, the new Satinelle ICE makes epilation more

comfortable and less painful than ever. The result is a silky-smooth skin

and a hair growth reduction of up to 50%, assuming you use the

appliance regularly (every 4 weeks).

The Satinelle ICE is suitable for all body parts. Type HP6496 also comes

with a skin cooler specially developed for epilating sensitive areas

(underarms, bikini line). These areas can be particularly sensitive to pain,

which this special skin cooler helps to diminish.

The rapidly rotating epilating discs catch even the shortest hairs (down to

0.5 millimetre!) and pull them out by the roots. As a result, your skin stays

smooth for up to four weeks and regrowth is soft and downy.

General description (Fig. 1)

A Insulating sleeve for skin cooler

B Leg skin cooler with pivoting cooling head

C Skin cooler for underarms and bikini line (HP6496 only)

D Shaving head (HP6496 only)

E Protective cap of shaving head (HP6496 only)

F Massaging element

G Epilating head

H Appliance

I Adapter

J Cleaning brush

K Exfoliating body puff

Important

Read these instructions for use carefully before you use the appliance and

save them for future reference.

Check if the voltage indicated on the adapter corresponds to the

local mains voltage before you connect the appliance.

,

ENGLISH

Only use the appliance in combination with the adapter supplied.

Do not use the appliance if the adapter or the appliance itself is

damaged.

If the adapter is damaged, always have it replaced by one of the

original type in order to avoid a hazard.

The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

Keep the appliance and the adapter dry.

Keep the appliance out of the reach of children.

Do not expose the appliance to temperatures lower than 5°C or

higher than 35°C.

To prevent damage and injuries, keep the running appliance away

from your scalp hair, eyebrows, eyelashes, clothes, threads, cords,

brushes etc.

Do not use the epilating head on irritated skin or skin with

varicose veins, rashes, spots, moles (with hairs) or wounds without

consulting your doctor rst. People with a reduced immune

response or people who suffer from diabetes mellitus, Raynaud’s

disease or immunodeciency should contact their doctor rst.

Noise level: Lc = 75.8dB [A]



This Philips appliance complies with all standards regarding

electromagnetic elds (EMF). If handled properly and in accordance with

the instructions in this instruction manual, the appliance is safe to use

according to scientic evidence available today.

Preparing for use

Freezing the skin cooler

1 Put the skin cooler WITHOUT the insulating sleeve in the freezer

or freezing compartment (***) at least 4 hours before you start

epilating. When the uid has turned completely blue, the skin

cooler is ready for use.

Make sure the outside of the skin cooler is completely dry before you

freeze it.

,

ENGLISH 7

Tip:You can store the skin cooler in the freezer permanently.



General information about epilation

Epilation is easier just after a bath or shower. Make sure your skin

is completely dry when you start to epilate.

When you use the appliance for the rst time, we advise you to try

it out on an area with only light hair growth. This helps you get

accustomed to the epilation process.

Before you epilate longer hairs on sensitive skin areas, shorten

them with a trimmer or a pair of scissors.

Your skin may become a little red and irritated the rst few times

you use the epilator. This phenomenon is absolutely normal

and quickly disappears. As you use the appliance more often, your

skin gets used to epilation, skin irritation decreases and

regrowth becomes thinner and softer. If the irritation has not

disappeared within three days, we advise you to consult a doctor.

We advise you to epilate before you go to bed at night, as

this allows any skin irritation that may develop to diminish

overnight.

Epilating with the leg skin cooler

Make sure your skin is clean, entirely dry and free from grease. Do not

use any cream before you start to epilate.

1 Slide the insulating sleeve onto the skin cooler. (Fig. 2)

The insulating sleeve prevents an unpleasant sensation of coldness in your

hand while you use the appliance. It also keeps the skin cooler cold as

long as possible.

Sometimes the pivoting cooling head freezes onto the skin cooler and

does not move when you take the skin cooler from the freezer. The

pivoting cooling head starts to pivot again after you have passed it over

your leg a few times.

2 Snap the appliance onto the skin cooler. (Fig. 3)

,

ENGLISH8

3 Insert the appliance plug into the bottom of the appliance and put

the adapter in the wall socket.

4 Select the desired speed to switch on the appliance. (Fig. 4)

Select speed I for areas with little hair growth and for areas where bones

are located directly beneath the skin, such as knees and ankles.

Select speed II for larger areas with stronger hair growth.

5 Stretch your skin with your free hand to make the hairs stand

upright.

6 Place the appliance perpendicularly onto the skin with the epilating

head pointing forward. Move the appliance against the direction of

hair growth at a moderate speed. (Fig. 5)

Make sure both the epilating discs and the skin cooler are in proper

contact with the skin.

Press the appliance lightly onto the skin.

If you are not completely satised with the epilation result, try

moving the epilator more slowly over your skin.

7 Use the tab on the bottom end of the appliance to remove the

appliance from the skin cooler. (Fig. 6)

Epilating with the skin cooler for underarms and bikini line

(HP6496 only).

The special skin cooler for the underarms and the bikini line reduces the

number of active epilating discs. Combined with the large cooling surface,

this skin cooler makes epilating sensitive areas less painful. You get the best

results when the hairs are not too long (max. 1cm).

1 Slide the insulating sleeve onto the skin cooler. (Fig. 7)

2 Snap the appliance onto the skin cooler. (Fig. 8)

3 Switch on the appliance by selecting the desired speed. (Fig. 4)

We advise you to use speed I.

4 To epilate the underarm area, place one arm behind your head to

stretch the skin. Then place the appliance perpendicularly onto the

skin with the hand of the other arm. (Fig. 9)

,

ENGLISH 9

5 To epilate the bikini line, stretch the skin with your free hand and

place the appliance perpendicularly onto your skin. Do not exert

any pressure. (Fig. 10)

6 Move the appliance slowly across the skin against the direction of

hair growth.

7 Use the tab on the bottom end of the appliance to remove the

appliance from the skin cooler for underarms and bikini line

(HP6496 only). (Fig. 6)

Epilating without skin cooler

If you do not want to use the skin cooler, for instance because you

have grown accustomed to the sensation of epilation, you can also

use the appliance without the skin cooler.

Make sure that you place the epilator perpendicularly onto your

skin and that you move it against the direction of hair growth.



Use the exfoliating body puff in the shower.

Regular massages with the puff may help to prevent ingrown hairs. Do

not use the puff immediately before or after epilation.

Shaving (HP6496 only)

You can use the shaving head to shave sensitive body parts, such as your

underarms and bikini line. With the shaving head, you obtain a smooth

result in a comfortable and gentle way.

1 Make sure the appliance is switched off.

2 Remove the skin cooler

3 Remove the epilating head. (Fig. 11)

Press the release button (1) and move the epilating head in the direction

of the arrow (2).

4 Place the shaving head on the appliance and press it onto the

appliance until it snaps home (‘click’). (Fig. 12)

5 Switch on the appliance by selecting speed II.

,

ENGLISH10

6 Place the shaving head onto your skin and move the appliance

slowly and smoothly against the direction of hair growth. Press the

appliance lightly. (Fig. 13)

Cleaning and maintenance

Never rinse the adapter or the appliance itself with water.

Do not use any corrosive detergents, scouring pads or cloths, petrol,

acetone etc. to clean the appliance.

1 Make sure the appliance is switched off and unplugged.

2 Remove the skin cooler from the appliance and slide the insulating

sleeve off the skin cooler.

3 Clean the pivoting cooling head of the leg skin cooler with the

brush supplied or with a moist cloth after each use.

Make sure the outside of the skin cooler is completely dry before

you freeze it again.

Cleaning the epilating head

1 Remove the epilating head. (Fig. 11)

Press the release button (1) and move the epilating head in the direction

of the arrow (2).

2 Clean all accessible parts and the epilating discs with the brush. (Fig.

14)

3 For thorough cleaning, remove the massaging element. (Fig. 15)

4 To clean the epilating head (not the appliance!) more thoroughly,

rinse it under the tap. (Fig. 16)

Never try to detach the epilating discs from the epilating head.

5 Place the epilating head on the appliance and press it onto the

appliance until it snaps home (‘click’). (Fig. 17)

The epilating head only ts onto the appliance in one way.

ENGLISH 11

Cleaning the shaving head (HP6496 only)

Clean the shaving head after every use.

1 Make sure the appliance is switched off and unplugged.

2 Pull the shaving unit out of the shaving head. (Fig. 18)

3 Brush the hairs off the shaving unit and the shaving head. Make sure

that you also brush away any hairs that have collected under the

trimmers. (Fig. 19)

4 You can also rinse the shaving unit (not the appliance!) under the

tap. (Fig. 20)

5 Put the shaving unit back into the shaving head and snap the shaving

head back onto the appliance (‘click’). (Fig. 21)

Do not exert pressure on the shaving foil to avoid damage.

6 Rub a drop of sewing machine oil onto the trimmers and shaving

foil of the shaving unit twice a year.

Storage

1

Put the protective cap on the shaving head (‘click’). (Fig. 22)

2 Store the appliance and the accessories in the pouch.

Replacement (HP6496 only)

If you use the shaving head several times a week, replace the shaving unit

(type HP6193) after one or two years of use or if these parts are

damaged.

Environment

Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an ofcial collection point for

recycling. By doing this, you help to preserve the environment.

(Fig. 23)

,

ENGLISH12

Guarantee & service

If you need information or if you have a problem, please visit the Philips

website at www.philips.com or contact the Philips Customer Care

Centre in your country (you nd its phone number in the worldwide

guarantee leaet). If there is no Customer Care Centre in your country,

turn to your local Philips dealer or contact the Service Department of

Philips Domestic Appliances and Personal Care BV.



Problem Possible cause Solution

Reduced

epilating

performance.

You moved the

epilator in the

wrong

direction.

Move the appliance against the

direction of hair growth.

You placed the

epilating

head on the

skin at the

wrong angle.

Make sure you place the appliance

perpendicularly onto the skin.

The epilating

head did not

touch the skin.

Make sure both the epilating head

and the skin cooler are in proper

contact with your skin during

epilation.

You moistened

your skin with

water or a

cream or other

skincare

product prior

to epilation.

Make sure your skin is entirely dry

and free from grease. Do not put

any cream, body milk or other

skincare product on your skin

before you start to epilate.

ENGLISH 13

Problem Possible cause Solution

The skin cooler

for underarms

and bikini line

was on the

appliance when

you epilated

your legs.

Only use the leg skin cooler to

epilate your legs.

The appliance

does not work.

The socket to

which the

appliance is

connected is

not live.

Make sure the socket you use is

live. If you use a socket in a

bathroom cabinet, you may need

to switch on the light to activate

the socket.

The appliance

is not switched

on.

Make sure that the appliance is

plugged in and switched on.

You did not

attach the

epilating

head correctly.

Place the epilating head on the

appliance and press it onto the

appliance until it snaps home

(‘click’).

Skin irritation

occurs.

You used the

epilator for the

rst time or

after a long

period of

disuse.

Some skin irritation may occur the

rst few times you use the

appliance. This is absolutely normal

and usually disappears quickly. For

tips to reduce skin irritation, see

the rst section of chapter ‘Using

the appliance’. Also make sure you

keep the epilating head clean.

ENGLISH14

Problem Possible cause Solution

The skin cooler

is not cold

enough.

You did not

freeze the skin

cooler long

enough.

Put the skin cooler without the

insulating sleeve in the freezer or

freezing compartment (***) for at

least 4 hours. When the colour of

the uid has changed from white

to completely blue, the skin cooler

is ready for use.

You dit not put

the skin

cooler in the

freezer or

freezing

compartment.

Put the skin cooler without the

insulating sleeve in the freezer or

freezing compartment (***) for at

least 4 hours. Do not store the

skin cooler in the refrigerator.

The skin cooler

did not touch

the skin.

Make sure the skin cooler is always

in proper contact with your skin

during epilation.

The pivoting

cooling head of

the leg skin

cooler does

not move.

The pivoting

cooling head is

frozen.

Pass the skin cooler over your leg

a few times to make it pivot again.

Always make sure the outside of

the skin cooler is completely dry

before you freeze it.

It is not

possible to

remove the

epilating head.

You did not

move the

epilating head

in the right

direction.

Press the release button and move

the epilating head in the direction

of the arrow (g. 11) to remove it.

It is not

possible to

remove the

shaving head

(HP6496 only).

You did move

the shaving

head in the

right direction.

Press the release button and move

the shaving head in the direction of

the arrow (g. 11) to remove it.

ENGLISH 15

Problem Possible cause Solution

Reduced

shaving

performance

(HP6496 only).

The shaving

head is dirty.

Switch off the appliance, unplug it

and remove the shaving unit. Then

clean the shaving unit with the

cleaning brush supplied. Remove

any hairs that are stuck under the

trimmers.

Stronger skin

irritation than

usual after

shaving

(HP6496 only).

The shaving foil

is damaged or

worn.

Replace the shaving unit.

ENGLISH16

17



С новия Satinelle ICE можете да отстранявате нежеланите косми

бързо, лесно и ефикасно. Съчетанието от новата керамична

епилираща система със следващия контура охладител за кожа и

масажиращата система представлява революция в епилацията.

Благодарение на естествения замразяващ ефект на леда и на

масажирането, новият Satinelle ICE прави епилацията по-удобна и по-

малко болезнена от когато и да било. Резултатът е копринено гладка

кожа и намаляване на растежа на космите до 50%, ако използвате

уреда редовно (на всеки 4 седмици).

Satinelle ICE е подходящ за всички части на тялото. Модел HP6496 се

предлага също така с охладител за кожа, който е разработен

специално за епилация на чувствителни места (подмишниците,

бикини линията). Тези зони са особено чувствителни на болка, която

се облекчава с помощта на тази специална охлаждаща приставка.

Бързо въртящите се епилиращи дискове улавят дори и най-късите

косъмчета (до половин милиметър!) и ги изтръгват от корен. В

резултат на това кожата ви остава гладка до четири седмици, а

наново поникналите косми са меки и мъхообразни.



A Изолиращ капак за охлаждащата приставка.

B Охлаждаща приставка за кожата на краката с подвижна

охлаждаща глава

C Охлаждаща приставка за подмишниците и бикини линията (само

за HP6496)

D Бръснеща глава (само за HP6496)

E Предпазно капаче на бръснещата глава (само за HP6496)

F Масажиращ елемент

G Епилираща глава

H Уред

I Адаптер

J Четка за почистване

K Ексфолиращо пухче за тяло





Преди да използвате уреда, прочетете внимателно това

ръководство за експлоатация и го запазете за справка в бъдеще.

Преди да свържете уреда, проверете дали напрежението,

посочено върху адаптера, отговаря на това на местната

електрическа мрежа.

Използвайте уреда само в съчетание с приложения към него

адаптер.

Не използвайте уреда, ако са повредени адаптерът или самият

уред.

С оглед на предотвратяване на злополука, винаги заменяйте

повредения адаптер само с оригинален такъв.

В адаптера има трансформатор. Не отрязвайте адаптера, за да

го замените с друг щепсел, тъй като това носи опасност.

Пазете уреда и адаптера от влага.

Дръжте уреда извън обсега на деца.

Не излагайте уреда на температури, по-ниски от 5°C или по-

високи от 35°C.

За да избегнете повреди и наранявания, дръжте работещия

уред далече от косата си, веждите, миглите, от дрехи, влакна,

конци, четки и др.

Не използвайте епилиращата глава върху възпалена кожа или

кожа с разширени вени, обриви, петна, бенки (с косми) или

рани без предварителна консултация с лекар. Лица с отслабен

имунитет или страдащи от захарен диабет, хемофилия или

имунна недостатъчност също трябва предварително да се

консултират с лекар.

Ниво на шума: Lc = 75,8 dB [A]



Този уред Philips е в съответствие с всички стандарти по отношение

на електромагнитните излъчвания (EMF). Ако се употребява

правилно и съобразно напътствията в Ръководството, уредът е

безопасен за използване според наличните досега научни факти.

,

18





1 Поставете охладителя за кожа БЕЗ изолиращия капак във

фризера или отделението за замразяване (***) поне за 4 часа,

преди да започнете епилацията. Когато течността стане

напълно синя, охладителят за кожа е готов за използване.

Преди да го замразите, проверете дали външната страна на

охладителя за кожа е съвсем суха.

Съвет:Можете да държите охлаждащата приставка постоянно във

фризера.





Епилацията се прави по-лесно непосредствено след като сте

взели вана или душ. Кожата ви трябва да е напълно суха, преди

да започнете епилацията.

Когато използвате уреда за пръв път, съветваме ви да опитате

върху област със слабо окосмяване. Това ще ви помогне да

свикнете с процеса на епилация.

Преди да епилирате по-дълги косми или чувствителни области

на кожата, подкъсете космите с машинка за подстригване или

ножици.

При първите няколко използвания на епилатора кожата ви

може малко да се зачерви и възпали. Това явление е абсолютно

нормално и бързо ще изчезне. Като използвате уреда по-често,

кожата ви ще свикне с епилацията, възпалението ще намалее, а

наново поникналите косми ще станат по-тънки и по-меки. Ако

възпалението не изчезне до три дни, съветваме ви да се

консултирате с лекар.

Съветваме ви да правите епилацията вечер преди лягане, тъй

като това ще позволи евентуалното възпаление на кожата да

намалее до другия ден.

,

 19



Кожата ви трябва да е чиста, съвсем суха и неомазнена. Не

използвайте никакъв крем, преди да започнете епилацията.

1 Затворете с приплъзване изолиращия капак на охладителя за

кожа. (фиг. 2)

Изолиращият капак предотвратява неприятното усещане на студ в

ръката ви, когато използвате уреда. Същевременно това запазва

охлаждащата приставка за кожа студена колкото е възможно по-

дълго време.

Понякога подвижната охлаждаща глава може да замръзне върху

охладителя за кожа и да не се движи, когато извадите охладителя от

фризера. Подвижната глава ще започне отново да се върти, след

като я прекарате няколко пъти по крака.

2 Поставете с щракване уреда върху охладителя за кожа. (фиг. 3)

3 Поставете щекера в гнездото отдолу на уреда и включете

адаптера в мрежов контакт.

4 Включете уреда, като изберете желаната скорост. (фиг. 4)

Изберете скорост І за области със слабо окосмяване и области, в

които костите са непосредствено под кожата, например колена и

глезени.

Изберете скорост ІІ за по-големи области с повече окосмяване.

5 Опънете кожата с една ръка, за да се изправят космите.

6 Поставете уреда перпендикулярно върху кожата, като

епилиращата глава сочи напред. Движете го срещу посоката на

растежа на космите при умерена скорост. (фиг. 5)

Погрижете се както епилиращите дискове, така и охладителят за

кожа да са в добър контакт с кожата.

Леко притиснете уреда към кожата.

Ако не сте напълно доволни от резултата от епилацията,

опитайте да движите епилатора по-бавно върху кожата.

7 Използвайте бутона отдолу на уреда, за да извадите уреда от

охладителя за кожа. (фиг. 6)

,

20

Stránka sa načítava ...

Philips HP6495/00 Používateľská príručka

Táto príručka je tiež vhodná pre

Philips HP6495/00 Používateľská príručka

V iných jazykoch

Súvisiace články