Electrolux EWF1645 Používateľská príručka

Značka: Electrolux

Model: EWF1645

Kategória: Práčky

Typ: Používateľská príručka

132 991 680

EWF 1045

EWF 1245

EWF 1445

WASHING MACHINE

PRALKA AUTOMATYCZNA

AUTOMATICKÁ PRACKA

AUTOMATICKÁ PRÁCKA

AUTOMATA MOSÓGÉP

132991680 copertina 28-10-2003 8:47 Pagina 1

Washing hints 14

Sorting the laundry 14

Temperatures 14

Before loading the laundry 14

Maximum loads 14

Laundry weights 14

Removing stains 14

Detergents and additives 15

International wash code symbols 16

Operating sequence 17-19

Washing programmes 20-21

Maintenance 22

Door seal 22

Bodywork 22

Detergent dispenser drawer 22

Drain pump 22

Water inlet filter 23

Emergency emptying out 23

Frost precautions 23

Something not working? 24-25

Warnings 3-4

Disposal 4

Tips for environmental protection 4

Technical specifications 4

Installation 5

Unpacking 5

Positioning 5

Water inlet 5

Water drainage 6

Electrical connection 6

Your new washing machine 7

Description of the appliance 7

Detergent dispenser drawer 7

Use 8

Control panel 8

Controls 8-13

Programme information 13

Dear customer,

Please read these operating instructions carefully

and pay particular attention to the safety notes

indicated in the first pages. We recommend that you

keep this instruction booklet for future reference and

pass it on to any future owners.

Transport damages

When unpacking the appliance, check that it is not

damaged. If in doubt, do not use it and contact the

Service Centre.

The symbols you will see on some paragraphs of this booklet have the following meaning:

The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is

particularly important for your safety or correct functioning of the appliance.

The information marked with this symbol provides additional instructions and practical tips on the use

of the appliance.

Tips and information about economical and ecological use of the machine are marked with this symbol.

Our contribution to the protection of the

environment: we use environmentally

friendly paper.

Contents

132991680 GB.qxd 28/10/2003 13:49 Pagina 2

ENGLISH

Installation

• All internal packing must be removed before using

the appliance. Serious damage may be caused to

the machine or adjacent furniture if the protective

transit devices are not removed or are not

completely removed. Refer to the relevant

paragraph in the instruction book.

• Any electrical work required to install this

appliance must be carried out by a qualified

electrician.

• Any plumbing work required to install this appliance

must be carried out by a qualified plumber.

• After having installed the machine, check that it is

not standing on its electrical supply cable.

• If the appliance is placed on a carpeted floor,

ensure that air can circulate freely between the

feet and the floor.

Use

• This appliance is designed for domestic use. It

must not be used for purposes other than those

for which it was designed.

• Only wash fabrics which are designed to be

machine washed. Follow the instructions on each

garment label.

• Do not overload the appliance. Follow the

instructions in the instruction book.

• Make sure that all pockets are empty. Objects

such as coins, safety pins, pins and screws can

cause extensive damage.

• Do not machine wash garments saturated with

petroleum, methylated spirits, trichlorethylene, etc.

If such fluids have been used to remove stains

prior to washing, wait until they have completely

evaporated from the fabric before placing

garments in the appliance.

• Place small items such as socks, belts, etc. in a

cloth bag or pillowcase to prevent them getting

trapped between the drum and the tub.

• Use only the recommended quantities of fabric

softener. An excessive amount could damage the

laundry.

• Leave the porthole door slightly ajar when the

appliance is not in use. This preserves the door

seal and prevents the formation of musty smells.

• Always check that water has emptied out before

opening the door. If not, drain the water following

the instructions in the instruction book.

• Always unplug the appliance and shut the water

tap after use.

General safety

• Repairs to the machine must be carried out only

by qualified personnel. Repairs carried out by

inexperienced persons could cause serious

danger. Contact your local Service Centre.

• Never pull the power supply cable to remove the

plug from the socket; always take hold of the plug

itself.

• During high temperature wash programmes the

door glass may get hot. Do not touch it!

Child safety

• Children are often not aware of how dangerous

electrical appliances can be. When the machine is

working, children should be carefully supervised

and not be allowed to play with the appliance.

• The packaging components (e.g. plastic film,

polystyrene) can be dangerous to children -

danger of suffocation! Keep them out of children’s

reach.

• Keep all detergents in a safe place out of

children’s reach.

• When the appliance is to be scrapped, cut off the

electrical supply cable and destroy the plug with

the remaining cable. Disable the door catch in

order to prevent children from becoming trapped

inside while playing.

Warnings

The following warnings are provided in the interests of overall safety. You must read them carefully before

installing or using the appliance.

132991680 GB.qxd 28/10/2003 13:49 Pagina 3

Disposal

Tips for environmental protection

Packaging materials

The materials marked with the symbol are

recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing

of them properly in appropriate collection

containers.

Machine

Use authorised disposal sites for your old appliance.

Help to keep your country tidy!

To save water, energy and to help protect the

environment, we recommend that you follow these

tips:

• Normally soiled laundry may be washed without

prewashing in order to save detergent, water and

time (the environment is protected too!).

• The machine works more economically if it is fully

loaded.

• With adequate pre-treatment, stains and limited

soiling can be removed; the laundry can then be

washed at a lower temperature.

• Measure out detergent according to the water

hardness, the degree of soiling and the quantity of

laundry being washed.

EWF 1045 EWF 1245 EWF 1445

DIMENSIONS Height 85 cm 85 cm 85 cm

Width 60 cm 60 cm 60 cm

Depth 59 cm 59 cm 59 cm

MAXIMUM LOAD Cotton 5 kg 5 kg 6 kg

Synthetics 2.5 kg 2.5 kg 3 kg

Delicates 2.5 kg 2.5 kg 3 kg

Woollens 2 kg 2kg 2 kg

Hand wash 2 kg 2 kg 2 kg

Silk 1 kg 1 kg 1 kg

SPIN SPEED 1000 rpm max. 1200 rpm max. 1400 rpm max

POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz 220-230 V/50 Hz 220-230 V/50 Hz

TOTAL POWER ABSORBED 2200 W 2200 W 2200 W

MINIMUM FUSE PROTECTION 10 A 10 A 10 A

WATER PRESSURE Minimum 500 kPa 500 kPa 500 kPa

Maximum 800 kPa 800 kPa 800 kPa

This appliance complies with the following EEC Directives:

73/23/EEC of 19/02/73 relating to low voltage

89/336/EEC of 03/05/89 relating to electromagnetic compatibility.

Technical specifications

132991680 GB.qxd 28/10/2003 13:49 Pagina 4

ENGLISH

Installation

Unpacking

All transit bolts and packing must be

removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

Using a spanner unscrew and remove the two rear

bottom screws. Slide out the two plastic pins.

Lay the machine gently on its back, making sure

that the hoses are not squashed.

Remove the polystyrene block from the bottom of

the machine and release the two plastic bags.

Very carefully slide out the left polythene bag,

removing it towards the right and then downwards.

Repeat the operation for the right polythene bag,

removing it towards the left and then upwards.

P1127

P1126

P1124

P0001

P1129

Remove the polystyrene base.

Set the machine upright and unscrew the remaining

rear screw. Slide out the relevant pin.

Fill all the holes with the plastic plugs supplied with

the instruction booklet.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

Water inlet

Connect the water inlet hose to a tap with a 3/4"

thread.

The other end of the inlet hose which connects to

the machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks

P0021

P1088

P1051

P0002

P1128

132991680 GB.qxd 28/10/2003 13:49 Pagina 5

The inlet hose must not be lengthened. If it is too

short and you do not wish to move the tap, you will

have to purchase a new, longer hose specially

designed for this type of use.

Water drainage

The end of the drain hose can be positioned in three

ways:

Hooked over the edge of a sink using the plastic

hose guide supplied with the machine. In this

case, make sure the end cannot come unhooked

when the machine is emptying.

This could be done by tying it to the tap with a piece

of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be

above the trap so that the bend is at least 60 cm

above the ground.

Directly into a drain pipe at a height of not less

than 60 cm and not more than 90 cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the drain pipe

must be larger than the outside diameter of the drain

hose.

The drain hose must not be kinked. Run it along the

floor; only the part near the drainage point must be

raised.

P0023

P0022

Electrical connection

This machine is designed to operate on a 220-230

V, single-phase, 50 Hz supply.

Check that your domestic electrical installation can

take the maximum load required (2.2 kW), also

taking into account any other appliances in use.

Connect the machine to an earthed socket.

The manufacturer declines any responsibility

for damage or injury through failure to comply

with the above safety precaution.

Should the appliance power supply cable

need to be replaced, this should be carried

out by our Service Centre.

The power supply cable must be easily

accessible after installing the machine.

132991680 GB.qxd 28/10/2003 13:49 Pagina 6

ENGLISH

Your new washing machine

This new washing machine, which is fitted with the Jet system, patented Electrolux, meets all modern needs

for effective treatment of laundry with low water, energy and detergent consumption.

Further savings are achieved by washing small loads of laundry, since water and electricity consumption is

proportional to the quantity and type of laundry being washed.

• The programme progress display shows the programme steps selected and the programme phase which

is running.

• The special wool programme with its new delicate wash system treats your woollens with extreme care.

• Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces

thermal shock to fabrics, helping to prevent creasing.

• The balance control device ensures the machine is stable during the spin.

• The programme selector dial combines the possibility of selecting between different fabrics, special cycles

and memories, making it easier to set the programmes.

1 Detergent dispenser drawer

2 Control panel

3 Door handle

4 Drain pump

5 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener, starch

Description of the appliance

FUNCTION

PROGRAM

Change

Options

Exit

START/PAUSE

EWF 1445

Temp. Spin

P1190

132991680 GB.qxd 03/11/2003 16:11 Pagina 7

Use

Control panel

only a few control elements (1 programme selector

dial and 6 buttons). This simple control method is

made easy thanks to the interactive display.

Interactive means that the washing machine display

changes to reflect each step you have entered. This

ensures that only those settings that make sense are

made. You are able to see the current settings at any

time in the information panel and in the option row.

1. Information panel shows the current settings

2. Real time clock

3. End cycle time

4. Selection shows temperature, spin speed,

options and extras.

4 Temperature button “Temp.”

Press this button repeatedly to increase or decrease

the temperature, if you want your laundry to be

washed at a temperature different from the one

proposed by the washing machine.

Maximum temperatures are 95°C for cotton, 60°C

for synthetic fabrics, 40°C for delicate fabrics, wool

and fabrics to be hand-washed, 30°C for silk and

«Miniprogramme», while «0» corresponds to cold

wash.

By depressing Temperature “Temp.” button, the

relevant message will appear on the second row of

the display (instead of «cycle end at»). In the corner

of the third row appears the indication of the

selected temperature.

Change

Options

Exit

Cotton

Cycle and at

08.30

10.55

95°C 1400

1 23

Temp. Spin

1 Programme chart

A programme chart in English is in the interior part

of the detergent dispenser drawer.

A programme chart in other languages is provided

with the instruction booklet.

2 Programme selector dial

The selector dial is divided into 4 sections:

• Cotton, synthetics and delicates (blue section)

• Handwash, wool, silk and mini-programme

(green section)

• Rinses, drain, spin and delicate spin (grey

section)

• Memory 1, memory 2, memory 3 (green section)

The selector dial can be turned either clockwise or

anticlockwise.

Position E corresponds to the ENERGY SAVING

programme for cotton and position O to Reset

programme/Switching OFF of the machine.

At the end of the programme the selector dial must

be turned to position O, to switch the machine OFF.

Attention!

If you turn the programme selector dial to another

programme when the machine is working, a

warning message appears for 4 seconds on the

display while the buzzer sounds for 3 times .

3 Display

The DISPLAY is used for setting a large number of

functions and combine them with each other using

PROGRAM

Change

Options

Exit

START/PAUSE

1234567

EWF 1445

TIMELINE

Temp. Spin

FUNCTION

132991680 GB.qxd 28/10/2003 13:49 Pagina 8

ENGLISH

5 Spin Speed button “Spin”

Press this button repeatedly to change the spin

speed, if you want your laundry to be spun at a

speed different from the one proposed by the

washing machine.

Maximum speeds are:

• for cotton: 1000 rpm for model EWF 1045;

1200 rpm for model EWF 1245;

1400 rpm for model EWF 1445;

• for synthetic, wool, and fabrics to be handwashed:

0900 rpm;

• for delicate, silk fabrics, miniprogramme:

0700 rpm;

Change

Options

Exit

COTTON

MAX 1400

08.30

10.55

1400

Temp. Spin

Change

Options

Exit

COTTON

MAX 95°C

08.30

10.55

60°C

Temp. Spin

By depressing the Spin speed button you can also

choose No Spin option «0», Rinse Hold option

and Night cycle option .

No spin «0» option eliminates all the spin phases

and increases the rinses number for cottons and

synthetics.

Rinse hold position : when you choose this

option, the machine will not drain the water of the

last rinse, so as not to wrinkle the laundry.

Night cycle position : when you choose this

option, the machine will not drain the water of the

last rinse, so as not to wrinkle the laundry.

As all spinning phases are suppressed, this washing

cycle is very noiseless and it can be selectionned at

night or in times with a more economical power rate.

On cotton and synthetic programmes the rinses will

be performed with more water.

To complete the cycle, choose one of the following

programmes:

Drain

To drain the water select Drain programme by

means of the selector dial, then press the START

button.

Spin

To spin the laundry choose spin or delicate spin

programme by means of the

selector dial; select spin speed by means of button

“Spin” and then press the START/PAUSE button.

Important!

Before choosing the programme (Drain),

(Spin) or (Delicate Spin) the selector dial has to

be positioned on «O» (OFF).

6 «Options», «Change» and «Exit»

buttons

Options button allows you to move through the

option icons.

Change

Options

Exit

Extra Rinse

No 10.55

Temp. Spin

132991680 GB.qxd 28/10/2003 13:49 Pagina 9

Change button allows you to select/change the

status of the different icons.

Exit button allows you to return to the previous

selection.

Depending on the program, different functions can be

combined. These must be selected after choosing the

desired program and before depressing the

START/PAUSE button.

By depressing the "Options" button, all the symbol

icons, allowed for the selected programme will

appear in the display (allowed for the selected

programme).

The first option will start flashing. Its name and

status will appear in the display.

If you want to change the option status, press

"Change" button. There will appear a line below the

selected icon, indicating that the option is set.

To select the other options press again the «Options»

button and proceed as before.

Once you have completed the selection of the

options, pressing the «Exit» button, the selected

icons will remain fixed in the display.

Note: To modify the already chosen option

selections, repeat the previous procedure.

Important! While selecting the option, if you press

the temperature “Temp.”, “Spin” , or Start/Pause

button, the relative function will be executed.

EXTRA RINSE: this option can be selected with

all programmes, except the wool/handwash

programs and miniprogramme.The machine will add

2 rinses for cottons and 1 rinse for synthetics,

delicates and silk.

This option is recommended for people who are

allergic to detergents, and in areas where the water is

very soft.

Change

Options

Exit

COTTON

CYCLE END AT

08.30

10.55

60°C 1400

Temp. Spin

Change

Options

Exit

Extra Rinse

Yes 10.55

Temp. Spin

TIME SAVING: this option can be used for lightly

soiled cotton, synthetic or delicates items in order to

obtain a good washing program in a short time. The

washing time will be reduced according to the type of

fabric and the selected temperature. Selecting this

option «Short» or «Very Short» will be shown in the

display.

DELAY START: this option makes it possible to

delay the starting of the washing program by 30 min -

60 min - 90 min, 2 hours and then by 1 hour till 20

hours. The delay you have selected is indicated in the

display.

You must select this option after you have set the

program and before you press the START/PAUSE

button.

You can cancel the delay time at any moment, before

you press the START/PAUSE button. If you have

already pressed the START/PAUSE button and you

wish to cancel the Delay time proceed as follows:

1. set the washing machine to PAUSE by pressing

the START/PAUSE button;

2. deselect the Delay start option, changing the

status;

3. press the START/PAUSE button to start the

program.

Important!

The selected delay can be changed only after

selecting the washing program again.

The door will locked throughout the delay time.

If you need to open the door, you must first set the

washing machine to PAUSE by pressing the

START/PAUSE button. After you have closed the

door, press the START/PAUSE button again.

The Delay Start cannot be selected with SPIN and

DRAIN programmes.

PREWASH: select this option if you wish your

laundry to be prewashed before the main wash (not

available for wool and handwash cycle, miniprogram

and silk).

The Prewash ends with a short spin at 650 rpm in

programmes for cotton and synthetic fabrics,

whereas in the program for delicate fabrics the water

is only drained.

Change

Options

Exit

Delay Start

Start in 30 min 11.25

Temp. Spin

Change

Options

Exit

Delay Start

No 10.55

Temp. Spin

132991680 GB.qxd 28/10/2003 13:49 Pagina 10

ENGLISH

INTENSIVE: for heavy soiled laundry.

This option can be selected only for cottons and

synthetics.

The washing time will be prolonged according to the

cycle temperature and the fabric type.

EASY IRON: selecting this button the laundry is

gently washed and spun to avoid any creasing. In

this way ironing is easier. Furthermore the machine

will perform 6 rinses instead of 3 for cotton and 4

rinses instead of 3 for synthetics. This function can

be used for cotton and synthetic fabrics. If this

option is selected for cotton programmes, the spin

speed automaticaly will reduce to 1000 rpm.

ECONOMY: this option can be selected only for

synthetics lightly or normally soiled with a

temperature of 40°C or higher. The washing time will

be prolonged. If you select 60°C-50°C-40°C, the

washing temperature will be reduced to 42°C.

MENU:

Menu option is used for selecting various basic

settings without affecting the particular wash

programme. These basic settings will remain active

until they are deselected/modified.

To move through the different Menu settings use the

«Options» button.

To change/confirm the selected setting use the

«Change» button.

MEMORY

Programme settings that are frequently used can be

saved (e.g. cotton, 95°C, 1200 rpm, with time saving).

There are 3 memory spaces available for this

purpose. The saved programme can be selected in

the same way as any other wash programme by

means of the selector dial.

Example: Cotton , 95°C, 1200 rpm, with Time saving.

1. Select the cycle and programme settings.

Change

Options

Exit

Cotton

Cycle end at

08.30

10.55

60°C 1400

Temp. Spin

2. Enter the Menu option and select one of the

memory positions. A «Store programme?»

message will appear in the display.

3. To memorise the selected programme press the

«Change» button. «Stored» message will appear

in the display.

To change the memorized programme setting repeat

the procedure from the beginning.

SOUND

The sound setting permits you to modify the volume

of the sound emitter. You can choose between

different levels: low, no sound and normal.

Example:

1. Enter the Menu option and select the sound

setting.

2. Use the «Change» button to select the desired

level.

Change

Options

Exit

Sound

Low or No Sound

Temp. Spin

Change

Options

Exit

Sound

Normal

Temp. Spin

Change

Options

Exit

Programme Stored

Temp. Spin

Change

Options

Exit

Memory 1

Store programme?

Temp. Spin

Change

Options

Exit

Setup

Temp. Spin

132991680 GB.qxd 28/10/2003 13:49 Pagina 11

RINSE +

The washing machine is set such that its water

consumption is extremely economical. For people

with allergies and in areas where the water is very

soft, it can however be helpful to use more water

when rinsing. When you select RINSE +, 2 additional

rinses will be carried out for cottons and 1 additional

rinse for synthetics, delicates and silk items. If RINSE

+ has been selected, will appear in the option

row.

LANGUAGE

You can change the language setting if you would like

the indicators in the display to appear in a different

language.

Example:

1. Enter the Menu option and select the Language

setting.

2. Press the «Change» button to select the desired

Language.

CLOCK

The clock setting permits you to modify/set up the

current time. It is important to keep it updated as the

current END Cycle Time depends on it.

Change

Options

Exit

Einstellungen

Temp. Spin

Change

Options

Exit

Sprache

DEUTCH

Temp. Spin

Change

Options

Exit

Language

ENGLISH

Temp. Spin

Change

Options

Exit

Extra Rinse

Yes 10.55

Temp. Spin

Change

Options

Exit

Extra Rinse

No 10.55

Temp. Spin

Example:

1. Enter the Menu option and select the Clock

setting.

2. With a short/single time pressure of the

«Change» button, the time varies minute by

minute. With a continue pressure of the

«Change» button, the time varies 10 minutes by

10 minutes.

CONTRAST

The Contrast setting allows you to modify the

optical characteristic of the display.

Example:

1. Enter the Menu option and select the Contrast

setting.

2. Use the «Change» button to set up the desired

contrast level.

BRIGHTNESS

The Brightness setting allows you to modify the

backlight intensity of the display.

Example:

1. Enter the Menu option and select the

Brightness setting.

2. Use the "Change"button to set up the desired

brightness level.

Note:

At the end of the programme if no button is pressed

for approximately 10 minutes the backlight intensity

goes off.

Change

Options

Exit

Brightness

Temp. Spin

Change

Options

Exit

Brightness

Temp. Spin

Change

Options

Exit

Contrast

Temp. Spin

Change

Options

Exit

Contrast

Temp. Spin

Change

Options

Exit

Clock

Set Time

14.46

Temp. Spin

Change

Options

Exit

Clock

Set Time

14.45

Temp. Spin

132991680 GB.qxd 28/10/2003 13:49 Pagina 12

ENGLISH

7 START/PAUSE button

This button has 2 functions:

● Start: after you have selected the desired

programme and options, press this button to

start the washing machine. The light close to the

button will stop flashing and remain lit.

If you have selected a delay time option, the

countdown will begin and will be shown on the

display.

● Pause: when you press this button again, the

programme in progress is interrupted. The light

close to the button will start flashing. To restart

the programme, press the button again.

When you PAUSE the cycle, it becomes possible to

open the door if:

● The washing machine is not in the heating

phase;

● The level of the water is not high;

● The drum is not turning.

Important! You must set the washing machine to

PAUSE before you make any change in the

programme in progress.

Programme information

Washing programme for machine washable wool as

well as for hand washable woollens and delicate

fabrics with the “hand washing” care symbol.

With this programme it is possible to rinse and spin

garments which have been washed by hand.

The machine performs 3 rinses, followed by a final

spin at maximum speed.

The spin speed can be reduced by depressing

button

Spin

. The final spin is foreseen only for

cotton items as in the spin programme.

Rinses

Wool

START/PAUSE

For emptying out the water of the last rinse in

programmes with the Rinse hold or Night cycle

option .

Turn first the programme selector dial to O, then select

programme and depress the START/PAUSE button.

Separate spin at max.700 rpm for hand washed

garments. It has to be used for cotton items. You can

reduce the speed by means of button Spin to adapt

it to the fabrics to be spun.

Separate spin at the maximum speed for hand

washed garments. It has to be used for synthetic,

delicate, wool/handwashed, silk items. You can

reduce the speed by means of button Spin to adapt

it to the fabrics to be spun.

This is a complete programme that can be

combined with the following options: spin speed

reduction, no spin, rinse hold or night cycle, delayed

start.

To be used for laundry which is lightly soiled or

which needs freshening up.

Max load 3 kg (EWF 1445);

2.5 kg (EWF 1045, EWF 1245).

Washing temperature 30°C

Programme duration 30 minutes

Final spin speed 700 r.p.m.

To reset a programme and to switch off the machine

turn the selector dial to O. Now can a new

programme be selected.

O = Cancelling/OFF

Mini programme

Delicate Spin

Spin

Drain

132991680 GB.qxd 28/10/2003 13:49 Pagina 13

Washing hints

Sorting the laundry

Follow the wash code symbols on each garment

label and the manufacturer’s washing instructions.

Sort the laundry as follows:

whites, coloureds, synthetics, delicates, woollens.

Temperatures

95°

for normally soiled white cottons and linen

(e.g. tea cloths, towels, tablecloths,

sheets...)

50°-60° for normally soiled, colour fast garments

(e.g. shirts, night dresses, pyjamas....) in

linen, cotton or synthetic fibres and for

lightly soiled white cotton (e.g.

underwear).

O (cold) for delicate items (e.g. net curtains), mixed

30°-40° laundry including synthetic fibres and

woollens.

Before loading the laundry

Never wash whites and coloureds together. Whites

may lose their “whiteness” in the wash.

New coloured items may run in the first wash; they

should therefore be washed separately the first time.

Make sure that no metal objects are left in the

laundry (e.g. hair clips, safety pins, pins).

Button up pillowcases, close zip fasteners, hooks

and poppers. Tie any belts or long tapes.

Remove persistent stains before washing. Rub

particularly soiled areas with a special detergent or

detergent paste.

Treat curtains with special care. Remove hooks or

tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the

programme charts.

General rules:

Cotton, linen: drum full but not too tightly packed;

Synthetics: drum no more than half full;

Delicate fabrics and woollens: drum no more than

one third full.

Washing a maximum load makes the most efficient

use of water and energy.

For heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

napkin 100 g

quilt cover 700 g

sheet 500 g

pillow case 200 g

tablecloth 250 g

towelling towel 200 g

tea cloth 100 g

night dress 200 g

ladies’ briefs 100 g

man’s work shirt 600 g

man’s shirt 200 g

man’s pyjamas 500 g

blouse 100 g

men’s underpants 100 g

Removing stains

Stubborn stains may not be removed by just water

and detergent. It is therefore advisable to treat them

prior to washing.

Blood: treat fresh stains with cold water. For dried

stains, soak overnight in water with a special

detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and dab the

stain; treat several times.

Dried grease stains: moisten with turpentine, lay

the garment on a soft surface and dab the stain with

the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust

removing product used cold. Be careful with rust

stains which are not recent since the cellulose

structure will already have been damaged and the

fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites

and fast coloureds only).

Grass: soap lightly and treat with bleach (whites and

fast coloureds only).

Ball point pen and glue: moisten with acetone (*),

lay the garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat

stains with methylated spirits. Remove any residual

marks from white fabrics with bleach.

Red wine: soak in water and detergent, rinse and

treat with acetic or citric acid, then rinse. Treat any

residual marks with bleach.

132991680 GB.qxd 28/10/2003 13:49 Pagina 14

ENGLISH

Quantity of detergent to be used

The type and quantity of detergent will depend on

the type of fabric, load size, degree of soiling and

hardness of the water used.

Water hardness is classified in so-called “degrees”

of hardness. Information on hardness of the water in

your area can be obtained from the relevant water

supply company, or from your local authority.

Follow the product manufacturers’ instructions on

quantities to use.

Use less detergent if:

– you are washing a small load,

– the laundry is lightly soiled,

– large amounts of foam form during washing.

Ink: depending on the type of ink, moisten the fabric

first with acetone (*), then with acetic acid; treat any

residual marks on white fabrics with bleach and then

rinse thoroughly.

Tar stains: first treat with stain remover, methylated

spirits or benzine, then rub with detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the choice of

detergent and use of the correct quantities to avoid

waste and protect the environment. Although

biodegradable, detergents contain substances

which, in large quantities, can upset the delicate

balance of nature.

The choice of detergent will depend on the type of

fabric (delicates, woollens, cottons, etc.), the colour,

washing temperature and degree of soiling.

All commonly available washing machine detergents

may be used in this appliance:

– powder detergents for all types of fabric,

– powder detergents for delicate fabrics (60°C max)

and woollens,

– liquid detergents, preferably for low temperature

wash programmes (60°C max) for all types of

fabric, or special for woollens only.

The detergent and any additives must be placed in

the appropriate compartments of the dispenser

drawer before starting the wash programme.

If using concentrated powder or liquid detergents, a

programme without prewash must be selected.

The washing machine incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Pour liquid detergent into the dispenser drawer

compartment marked just before starting the

programme.

Any fabric softener or starching additives must be

poured into the compartment marked before

starting the wash programme.

Follow the product manufacturer’s

recommendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer.

132991680 GB.qxd 28/10/2003 13:49 Pagina 15

International wash code symbols

These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.

Energetic wash

Delicate wash

Max. wash

temperature

95°C

Max. wash

temperature

60°C

Max. wash

temperature

40°C

Max. wash

temperature

30°C

Hand wash Do not

wash

at all

Bleaching Bleach in cold water Do not bleach

Ironing Hot iron

max 200°C

Warm iron

max 150°C

Lukewarm iron

max 110°C

Do not iron

Dry cleaning Dry cleaning

in all solvents

Dry cleaning in

perchlorethylene,

petrol, pure alcohol,

R 111 & R 113

Dry cleaning

in petrol,

pure alcohol

and R 113

Do not

dry clean

Drying Flat On the line On clothes

hanger

Tumble dry

high

temperature

low

temperature

Do not

tumble dry

132991680 GB.qxd 28/10/2003 13:50 Pagina 16

ENGLISH

4. Switch the machine ON and OFF

Turn the selector dial to the desired programme to

switch the appliance on.

To switch the appliance off turn it to «O».

Switching the appliance for the first time.

LANGUAGE

When switching on the appliance for the first time

you must set the language in which you want the

indicators in the display to appear.

Important!

If the display is not showing any language, the

appliance has already been switched on once. In

such case, go to the chapter «Change language» if

you would like to change the language setting.

Example:

1.Press the «Change» button until the desired

language appears in the display.

2.Press the EXIT button to confirm the selection.

All indicators in the display will appear in this

language from now on.

When the appliance is switched on again all

indicators in the display will appear in this language.

Note:

If the undesired language has been set, press

contemporary SPIN + OPTIONS buttons for about 2

seconds in order to change the language.

Follow the instructions as before.

Change

Options

Exit

Einstellungen

Temp. Spin

Change

Options

Exit

Sprache

DEUTCH

Temp. Spin

Change

Options

Exit

Language

ENGLISH

Temp. Spin

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C,

with the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment .

If you have selected the prewash function, pour

detergent into the appropriate compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked , without exceeding the «MAX» mark.

P1195

P1194

P0004

132991680 GB.qxd 28/10/2003 13:50 Pagina 17

7. Select the Spin Speed “Spin”, the

Rinse Hold or Night cycle .

Press the SPIN SPEED button repeatedly, in

order to select the desired spin speed or No Spin

«O» or the Rinse Hold or the Night Cycle

options. The relevant message will appear on the

second row of the display. The selected spin level

will be shown on the third row next to the spin

button.

If you select the Rinse Hold or Night Cycle options,

the machine will stop at the end of the programme

with the water still in the tub.

8. Select the desired options

Depress the relevant buttons to select the required

options.

Depending on the selected programme only

certain options are available and shown during

the selection phase.

Note: Not all the options are compatible between

themselves. The uncompatible option icons will

disappear.

9. Select the DELAY TIME

Before you start the programme, if you wish the

starting to be delayed, choose the DELAY option.

The selected delay time value (up to 20 hours) will

appear on the display while selecting.

The end cycle will be updated and shown on the

relative position of the display.

Change

Options

Exit

Delay Start

Start in 30 min 11.25

Temp. Spin

Change

Options

Exit

Delay Start

No 10.55

Temp. Spin

Change

Options

Exit

COTTON

MAX 1400

08.30

10.55

1200

40°C

Temp. Spin

SETTING THE TIME

You should set the time prior to the first wash and

when changing to and from daylight savings time.

See «Clock setting», Menu.

5. Select the desired programme/fabric

Turn the selector dial, in order to select the desired

programme/fabric. The relevant message will appear

in the display.

The display will show the END CYCLE TIME of the

selected programme, calculated on the basis of the

maximum load for each type of fabric. The

START/PAUSE button light will start flashing.

If the load of laundry to be washed is small, at the

beginning of the cycle the display will still indicate

the END CYCLE relevant to the maximum load. The

duration value will be gradually adjusted during the

execution of the cycle.

6. Select the temperature

Press the TEMPERATURE button if you wish to

select a temperature value different from the one

proposed by the washing machine.

The message of the maximum available temperature

appears on the second row of the display (instead of

«cycle end at»). In the corner of the third row

appears the indication of the selected temperature.

Change

Options

Exit

COTTON

MAX 95°C

08.30

10.55

40°C 1400

Temp. Spin

Change

Options

Exit

Cotton

Cycle and at

08.30

10.55

60°C 1400

Temp. Spin

132991680 GB.qxd 28/10/2003 13:50 Pagina 18

ENGLISH

10. Start the programme

Press the START/PAUSE button. The relevant light

will stop flashing. The message relevant to the

phase that is in progress will be shown in the

display.

If you have chosen a delayed start, the washing

machine will begin the countdown.

11. How to change a programme during

its cycle

Before you make any change, you must pause the

washing machine by pressing the START/PAUSE

button.

It is possible to change any phase before the

programme carries it out.

When the programme has started, you can only

reset it by turning the programme selector dial to

«O» and then you can select the new programme.

The washing water remains in the tub.Start the new

programme by depressing the START/PAUSE

button.

Note: To drain the water before starting the new

cycle you have to cancel the programme and select

the DRAIN cycle.

12. Cancelling a programme

Turn the selector dial to «O» to cancel a programme

which is running. Now you can select a new

programme.

13. How to open the door during the

cycle of a programme

You can open the door, after having set the washing

machine to PAUSE, provided the following

conditions exist:

● the washing machine is not in the heating phase

beyond 55°C;

● the level of the water is not high;

● the drum is not turning.

Change

Options

Exit

COTTON

Washing

08.30

12.00

40°C 1200

Temp. Spin

START/PAUSE

If these requirements are met, when you pause the

washing machine, the relevant message appears in

the display and the door can be opened.

Should it not be possible to open the door, and

should it be absolutely necessary to do so, switch

the machine off by turning the selector dial on "O"

position.

After approximately 3 minutes, you can open the

door.

Pay attention to the level and temperature of the

water in the washing machine!

14. End of programme

At the end of the programme, the washing machine

stops automatically, gives an audible signal (if

option no sound has not been selected), and

displays the relevant message.

If you had selected the RINSE HOLD or NIGHT

CYCLE option, the START/PAUSE button light is off.

To drain or spin first turn the programme selector

dial to «O» and then to drain programme or

spin/delicate spin programme / .

Release of the lock is also indicated by the coming

on of the message "Door openable" (cycle ended).

Turn the programme selector dial to «O» to switch

the machine off.

Remove the laundry from the washing machine.

Check whether the drum is completely empty, by

rotating it with your hand. The purpose of this is to

prevent any items of laundry from remaining

accidentally in the drum, where they might get

damaged in a subsequent wash (e.g. by shrinking)

or bleed colour into another load of laundry.

We advise you to close the water supply tap and

disconnect the plug from the socket.

Leave the door ajar in order to air the washing

machine.

132991680 GB.qxd 28/10/2003 13:50 Pagina 19

Washing programmes

* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending

on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It

refers to the highest temperature for each wash programme.

** In compliance with EC directive 92/75 the consumption figures indicated on the Energy label refer to this

programme at E60°C.

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable

Woolmark products provided that the garments are washed according to the instructions on the garment label

and those issued by the manufacturer of this machine. Licence No. M9605.

Type of laundry

and symbols on

labels

1.9

47 2.20

0.85 44 2.04

1.02 49 2.04

0.85

1.27

1.05

1.27

0.6

57 58

0.55

53 58

0.35 52

0.4 55

0.3

0.4

0.35

White and

coloureds cotton:

e.g. sheets,

tablecloths,

household linen

White and

coloured cotton

Economy**: e.g.

shirts, blouses,

underwear, towels,

house-hold linen

Synthetic fabrics:

e.g. shirts, blouses,

underwear

Delicate fabrics:

e.g. acrylic fabrics,

viscose, polyester,

synthetic blends

Wool

Handwash

6 kg

EWF1445

6 kg

3 kg

Max

load

Programme/

temperature

Available options

Consumption*

Energy

kWh

Water

litres

Time

h/min.

Cottons

O(cold)-95°C

Cottons E

60°-50°-40°C

Synthetics

O(cold)-60°C

Delicates

O(cold)-40°C

Wool

O(cold)-40°C

Hand wash

O(cold)-40°C

Description of

programme

Main wash at

O(cold)-95°C

3 rinses

Long spin

Main wash at

60°-50°-40°C

2 rinses

Long spin

Main wash at

O(cold)-60°C

3 rinses

Short spin

Main wash at

O(cold)-40°C

3 rinses

Short spin

Main wash at

O(cold)-40°C

3 rinses

Short spin

Main wash at

O(cold)-40°C

3 rinses

Short spin

0.3 50

Silk

30°C

Main wash at

30°C

3 rinses

Short spin

0.3 40 30

0.35

Miniprogramme

30°C

Main wash at

30°C

3 rinses

Short spin

Washing Programmes

5 kg

EWF1045

EWF1245

5 kg

2.5 kg2.5 kg2.5 kg

3 kg

2.5 kg

EWF1045-EWF1245

2.05

52 2.20

EWF1445

2 kg

1 kg

3 kg

2.5 kg

132991680 GB.qxd 28/10/2003 13:50 Pagina 20

Stránka sa načítava ...

Electrolux EWF1645 Používateľská príručka

Značka: Electrolux

Model: EWF1645

Kategória: Práčky

Typ: Používateľská príručka

Stiahnite si PDF

správa

V iných jazykoch

čeština: Electrolux EWF1645 Uživatelský manuál
polski: Electrolux EWF1645 Instrukcja obsługi

Electrolux EWF1645 Používateľská príručka

Electrolux EWF1645 Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty