9
Extra Rinse
Start/Pause
Buon
Press this buon, the washing machine will perform addional rinses.Press
the buon once to select one addional rinse. The display will show"P-1".
Press the buon repeatedly and the screen will display "P-2''or "P-3'',
indicang two or three addional selected rinses. The "extra rinse light" is
acvated and flashes during the performance. "P-1/2/3" is displayed
alternang with the remaining me. The light turns off and the display
disappears when the extra rinse ends.
When the washing machine is connected to the power socket and a
program is selected, lightly touch this buon to start operaon. During
a wash cycle, touch it lightly ,operaon will stop and the digits on the
screen start blinking. Touch it again to resume operaon. To cancel a wash
program during a wash cycle, touch this buon, when the digits on the
screen start blinking, press the Power switch, the program will be cancelled.
Before a washing program,select this program to set the washing load
(1/2Full),the washing machine will automacally adjust the water
consumpon and washing me.
Informaon as remaining wash me and error messages will be shown here.
Touch this buon lightly, the washing machine will start operaon aer a
period of me and the corresponding indicator will go on. The range is 0.5-24
hours; each touch of this buon increases a half hour. Aer the buon is set,
press the Start/Pause buon to start countdown of the set me (the me is
displayed on the screen unl the program ends).
Aer a wash program is started the display will go on and the
remaining wash me decreases. As the water pressure and
temperature may differ, the remaining me may be adjusted
accordingly. When the laundry is not balanced during spinning, the
me may be automacally prolonged.
Select this funcon when programe 1-9 is selected.
The delay me must be longer than the program me otherwise
the washing machine will start the wash program directly.
To cancel audible alarm
Alarm sound can be cancelled if it is required (not recommended)
Switch on the washing machine and turn the program knob to spin cycle, then press the
"Delay" and "Extra rinse" buon, hold on for 3 seconds.
The message "BEEP OFF” will be displayed on the screen, indicang that the alarm sound has
been cancelled.
To reinstate audible alarm
Switch on the washing machine and turn the program knob to spin cycle, then press the
"Delay" and "Extra rinse" buon, hold on for 3 seconds.The "BEEP ON" message will be
displayed on the screen, indicang that the alarm sound has been reinstated.
Funcons
7
8
ECO
9
LED Display
10
Delay
11