Dometic CF35, CF40, CF50 Návod na používanie

CF35, CF40, CF50

Compressor Cooler

Operating manual . . . . . . . . . . . . . . . . . . . . . 6

Kompressor-Kühlbox

Bedienungsanleitung . . . . . . . . . . . . . . . . .23

Glacière à compression

Notice d’utilisation . . . . . . . . . . . . . . . . . . .42

Nevera por compresor

Instrucciones de uso . . . . . . . . . . . . . . . . . . 61

Geleira com compressor

Manual de instruções . . . . . . . . . . . . . . . . .80

Frigorifero a compressore

Istruzioni per l’uso . . . . . . . . . . . . . . . . . . . .98

Compressorkoelbox

Gebruiksaanwijzing. . . . . . . . . . . . . . . . . . 117

Kompressor-køleboks

Betjeningsvejledning . . . . . . . . . . . . . . . .136

Kylbox med kompressor

Bruksanvisning. . . . . . . . . . . . . . . . . . . . . .153

Kjøleboks med kompressor

Bruksanvisning. . . . . . . . . . . . . . . . . . . . . . 170

Kompressori-kylmälaatikko

Käyttöohje . . . . . . . . . . . . . . . . . . . . . . . . . 187

Компрессорный холодильник

Инструкция по эксплуатации . . . . . . . . . 205

Przenośna lodówka

kompresorowa

Instrukcja obsługi . . . . . . . . . . . . . . . . . . . 224

Chladiaci box s kompresorom

Návod na obsluhu. . . . . . . . . . . . . . . . . . . 243

Kompresorový chladicí box

Návod k obsluze . . . . . . . . . . . . . . . . . . . . 261

Kompresszoros hűtőláda

Használati utasítás. . . . . . . . . . . . . . . . . . . 278

EN

DE

FR

ES

PT

IT

NL

DA

SV

NO

FI

RU

PL

SK

CS

HU

MOBILE COOLING

COOLFREEZE

CF35-CF50_OPM_EMEA16.book Seite 1 Dienstag, 9. Juli 2019 5:42 17

CF35-CF50_OPM_EMEA16.book Seite 2 Dienstag, 9. Juli 2019 5:42 17

CF35, CF40, CF50

3

1

4

2

3

1

CF 35, CF 40

2

CF 35, CF 40, CF 50

ON

OFF

SET

POWER

UP

+

DOWN

–

ERROR

°

1 3 4 5 6 72

3

CF35-CF50_OPM_EMEA16.book Seite 3 Dienstag, 9. Juli 2019 5:42 17

CF35, CF40, CF50

4

100-240V~AC

FUSE

12/24V DC

1

2 3

4

1

2

1

5

CF35-CF50_OPM_EMEA16.book Seite 4 Dienstag, 9. Juli 2019 5:42 17

CF35, CF40, CF50

5

CF 50

AB

6

1 2 3

4

5

6

7

1 2

8

CF35-CF50_OPM_EMEA16.book Seite 5 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50

6

Please read this manual carefully before starting the device. Keep it in a

safe place for future reference. If the device is passed on to another

person, this manual must be handed over to the user along with it.

The manufacturer cannot be held liable for damage resulting from improper usage

or incorrect operation.

Contents

1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2.2 Operating the cooling device safely . . . . . . . . . . . . . . . . . . . . . . . . . .9

3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 Function description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5.1 Scope of functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.2 Operating and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6.1 Before initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

6.2 Energy saving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

6.3 Connecting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

6.4 Using the battery monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

6.5 Using the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

6.6 Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

6.7 Switching off the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

6.8 Defrosting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

6.9 Replacing the device fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

6.10 Replacing the plug fuse (12/24 V) . . . . . . . . . . . . . . . . . . . . . . . . . . .18

6.11 Replacing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

7 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

8 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

10 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

CF35-CF50_OPM_EMEA16.book Seite 6 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50 Explanation of symbols

7

1 Explanation of symbols

D

!

A

I

2 Safety instructions

2.1 General safety

!

WARNING! Failure to obey these warnings could result in death

or serious injury.

Electrocution hazard

• Do not operate the cooling device if it is visibly damaged.

• If this cooling device's power cable is damaged, it must be replaced

by the manufacturer, customer service or a similarly qualified person in

order to prevent safety hazards.

• This cooling device may only be repaired by qualified personnel.

Improper repairs can lead to considerable hazards.

DANGER!

Safety instruction: Indicates a hazardous situation that, if not avoided,

will result in death or serious injury.

WARNING!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

CAUTION!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

NOTICE!

Indicates a situation that, if not avoided, can result in property damage.

NOTE

Supplementary information for operating the product.

CF35-CF50_OPM_EMEA16.book Seite 7 Dienstag, 9. Juli 2019 5:42 17

EN

Safety instructions CF35, CF40, CF50

8

Health hazard

• This device can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or

instruction concerning use of the device in a safe way and understand

the hazards involved.

• Children shall not play with the device.

• Cleaning and user maintenance shall not be made by children without

supervision.

• Children aged from 3 to 8 years are allowed to load and unload

cooling devices.

Explosion hazard

• Do not store any explosive substances such as spray cans with a

flammable propellant in the cooling device.

!

CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Electrocution hazard

• Disconnect the cooling device from the power supply

– before each cleaning and maintenance

– after every use

Health hazard

• Food may only be stored in its original packaging or in suitable

containers.

A

NOTICE! Damage hazard

• Check that the voltage specification on the type plate corresponds to

that of the energy supply.

• Only connect the cooling device as follows:

– With the DC connection cable to a DC power supply in the vehicle

– Or with the AC connection cable to an AC power supply

• Never pull the plug out of the socket by the cable.

• If the cooling device is connected to a DC outlet: Disconnect the

cooling device and other power consuming devices from the battery

before connecting a quick charging device.

• If the cooling device is connected to a DC outlet: Disconnect the

cooling device or switch it off when you turn off the engine. Otherwise

you may discharge the battery.

CF35-CF50_OPM_EMEA16.book Seite 8 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50 Safety instructions

9

• The cooling device is not suitable for transporting caustic materials or

materials containing solvents.

2.2 Operating the cooling device safely

!

CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Electrocution hazard

• Before starting the cooling device, ensure that the power supply line

and the plug are dry.

Health hazard

• Opening the cooling devicefor long periods can cause significant

increase of the temperature in the compartments of the device.

• Clean regularly surfaces that can come in contact with food and

accessible drainage systems.

• Store raw meat and fish in suitable containers in the device, so that it is

not in contact with or drip onto other food.

• If the device is left empty for long periods:

– Switch off the device.

– Defrost the device.

– Clean and dry the device.

– Leave the door open to prevent mould developing within the

device.

A

NOTICE! Damage hazard

• Do not use electrical devices inside the cooling device unless they are

recommended by the manufacturer for the purpose.

• Do not place the cooling device near naked flames or other heat

sources (heaters, direct sunlight, gas ovens etc.).

• Risk of overheating!

Ensure at all times that there is a minimum of 50 mm ventilation on all

four sides of the cooling device. Keep the ventilation area free of any

objects that could restrict the air flow to the cooling components.

Do not place the cooling device in closed compartments or areas with

none or minimal air flow.

• Ensure that the ventilation openings are not covered.

• Do not fill the inner container with ice or fluids.

• Never immerse the cooling device in water.

• Protect the cooling device and cables against heat and moisture.

CF35-CF50_OPM_EMEA16.book Seite 9 Dienstag, 9. Juli 2019 5:42 17

EN

Scope of delivery CF35, CF40, CF50

10

3Scope of delivery

4 Intended use

The cooler is suitable for cooling and freezing foods. The device is also suitable for

use on boats.

The cooling device is suitable for camping use.

The device shall not to be exposed to rain.

The device is designed to be operated from a 12 V

g or 24 Vg on-board supply

socket of a vehicle (e. g. cigarette lighter), boat or caravan as well as from a

100 – 240 V AC mains.

!

5 Function description

The cooler can chill products, keep them cool as well as freeze them. A mainte-

nance-free refrigerant circuit with compressor provides the cooling. The extra strong

insulation and powerful compressor ensure especially fast cooling.

The cooler is portable.

When used on boats, the cooler can be withstand a constant heel (inclination) of 30°.

No. in

fig. 1, page 3

Quantity Description

1 1 Cooler

2 1 Connection cable for 12/24 Vg connection

3 1 Connection cable for 100 – 240 Vw connection

4 2 Carrying handle, consisting of:

–2 holders

–1 handle

– 4 fastening screws

–1Operating manual

CAUTION! Health hazard!

Please check if the cooling capacity of the device is suitable for storing

the food or medicine you wish to cool.

CF35-CF50_OPM_EMEA16.book Seite 10 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50 Function description

11

5.1 Scope of functions

• Power supply with priority circuit for connecting to the AC mains

• Three-level battery monitor to protect the vehicle battery

• Turbo mode for rapid cooling

• Display with temperature gauge

switches off automatically at low battery voltage

• Temperature setting: With two buttons in steps of 1 °C (2 °F)

• Removable carrying handles

5.2 Operating and display elements

CF35, CF40

Lock for lid: fig. 2 1, page 3

CF35, CF40, CF50

Operating panel (fig. 3, page 3)

Item Description Explanation

1ON

OFF

Switches the cooler on or off when the button is pressed for

between one and two seconds

2 POWER Status indication

LED lights up green: Compressor is on

LED lights up orange: Compressor is off

LED flashes orange: display switched off

automatically due to low bat-

tery voltage

3 ERROR LED flashes red: Device is switched on but not

ready for operation

4 SET Selects the input mode

– Temperature setting

– Celsius or Fahrenheit display

– Set battery monitor

5 – Display, shows the information

6 UP + Press once to increase the value

7 DOWN – Press once to decrease the value

CF35-CF50_OPM_EMEA16.book Seite 11 Dienstag, 9. Juli 2019 5:42 17

EN

Operation CF35, CF40, CF50

12

Connection sockets (fig. 4, page 4):

6Operation

!

6.1 Before initial use

I

Mounting the handles

The handles are enclosed unassembled. If you wish to attach the handles, proceed

as follows:

➤ Make a handle by putting two holders (fig. 5 1, page 4) and a handle (fig. 5 2,

page 4) together.

➤ Fasten the grip with the enclosed screws in the holes provided.

Turning the lid stop around (CF50)

You can turn the lid stop around if you want to open the lid from the other side. To

do this, proceed as follows:

➤ Open the lid and pull it out (fig. 6 A, page 5).

➤ Turn the lid.

➤ Insert the lid in the lid holders on the side opposite the cooler (fig. 6 B, page 5).

Item Description

1 Connection socket AC voltage supply

2Fuse holder

3 Connection socket DC voltage supply

WARNING! Fire hazard!

• When positioning the device, ensure the supply cord is not trapped

or damaged.

• Do not locate multiple portable socket-outlets or portable power

supplies at the rear of the device.

NOTE

Before starting your new cooler for the first time, you should clean it

inside and outside with a damp cloth for hygienic reasons (please also

refer to the chapter “Cleaning and maintenance” on page 19).

CF35-CF50_OPM_EMEA16.book Seite 12 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50 Operation

13

Selecting the temperature units

You can switch the temperature display between Celsius and Fahrenheit. This is how

to do it:

➤ Switch on the cooler.

➤ Press the “SET” button (fig. 3 4, page 3) twice.

➤ Use the “UP +” (fig. 3 6, page 3) and “DOWN –” (fig. 3 7, page 3) buttons to

select Celsius or Fahrenheit.

✓ The selected temperature units then appear in the display for a few seconds. The

display flashes several times before it returns to the current temperature.

6.2 Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.

• Allow warm food to cool down first before placing it in the cooling device to

keep cool.

• Do not open the cooling device more often than necessary.

• Do not leave the cooling device open for longer than necessary.

• Defrost the cooler once a layer of ice forms.

• Avoid unnecessary low temperatures.

6.3 Connecting the cooler

Connecting to a battery (vehicle or boat)

The cooler can be operated with 12 V

g or 24 Vg.

A

For safety reasons the cooler is equipped with an electronic system to prevent the

polarity reversal. This protects the cooler against short-circuiting when connecting to

a battery.

➤ Plug the 12/24 V connection cable (fig. 1 2, page 3) into the DC voltage

socket and also into the cigarette lighter or a 12 V or 24 V socket.

NOTICE! Danger of damage!

Disconnect the cooler and other consumer units from the battery before

you connect the battery to a quick charging device.

Overvoltage can damage the electronics of the device.

CF35-CF50_OPM_EMEA16.book Seite 13 Dienstag, 9. Juli 2019 5:42 17

EN

Operation CF35, CF40, CF50

14

Connecting to a 100 – 240 V AC mains (e.g. in the home or office)

D

The coolers have an integrated multi-voltage power supply with priority circuit for

connecting to an AC voltage source of 100 – 240 V. The priority circuit automatically

switches the cooler to mains operation, if the device is connected to a 100 – 240 V

AC mains, even if the 12/24 V connection cable is still attached.

When switching between the AC mains and the battery supply, the red LED may

light up briefly.

➤ Plug the 100–240 V connection cable (fig. 1 3, page 3) into the AC voltage

socket and connect it to the 100 – 240 V AC voltage mains.

6.4 Using the battery monitor

The device is equipped with a multi-level battery monitor that protects your vehicle

battery against excessive discharging when the device is connected to the on-board

12/24 V supply.

If the cooler is operated when the vehicle ignition is switched off, the cooler switches

off automatically as soon as the supply voltage falls below a set level. The cooler will

switch back on once the battery has been recharged to the restart voltage level.

A

DANGER! Danger of electrocution!

• Never handle plugs and switches with wet hands or if you are

standing on a wet surface.

• If you are operating your cooler on board a boat from a mains

connection of 100 – 240 V

w, you must install a residual current

circuit breaker between the 100 – 240 V AC mains and the cooler.

Seek advice from a trained technician.

NOTICE! Danger of damage!

When switched off by the battery monitor, the battery will no longer be

fully charged. Avoid starting repeatedly or operating current consumers

without longer charging phases. Ensure that the battery is recharged.

CF35-CF50_OPM_EMEA16.book Seite 14 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50 Operation

15

In “HIGH” mode, the battery monitor responds faster than at the levels “LOW” and

“MED” (see the following table).

This is how to select the battery monitor mode:

➤ Switch on the cooler.

➤ Press the “SET” button (fig. 3 4, page 3) three times.

➤ Use the “UP +” (fig. 3 6, page 3) and “DOWN –” (fig. 3 7, page 3) buttons to

select the battery monitor mode.

✓ The selected mode then appears in the display for a few seconds. The display

flashes several times before it returns to the current temperature.

I

6.5 Using the cooler

A

➤ Place the cooler on a firm foundation.

Make sure that the ventilation slots are not covered and that the heated air can

dissipate.

Battery monitor mode LOW MED HIGH

Switch-off voltage at 12 V

10.1 V 11.4 V 11.8 V

Restartvoltage at 12 V

11.1 V 12.2 V 12.6 V

Switch-off voltage at 24 V

21.5 V 24.1 V 24.6 V

Restart voltage at 24 V

23.0 V 25.3 V 26.2 V

NOTE

When the cooler is supplied by the starter battery, select the battery

monitor mode “HIGH”. If the cooler is connected to a supply battery,

the battery monitor mode “LOW” will suffice.

If you wish to operate the cooler from the AC mains, set the battery

monitor to the “LOW” position.

NOTICE! Danger of overheating!

Ensure at all times that there is sufficient ventilation so that the heat that

generated during operation can dissipate. Ensure that the ventilation

slots are not covered. Make sure that the device is sufficiently far away

from walls and other objects so that the air can circulate.

CF35-CF50_OPM_EMEA16.book Seite 15 Dienstag, 9. Juli 2019 5:42 17

EN

Operation CF35, CF40, CF50

16

I

➤ Close the cooler, see chapter “Connecting the cooler” on page 13.

I

A

➤ Press the “ON/OFF” button (fig. 3 1, page 3) for between one and two

seconds.

✓ The “POWER” LED lights up.

✓ The display (fig. 3 5, page 3) switches on and shows the current cooling

temperature.

I

✓ The cooler starts cooling the interior.

I

Locking the cooler (CF35, CF40)

➤ Close the lid.

➤ Press the lock (fig. 2 1, page 3) down, until it latches in place audibly.

NOTE

Place the cooler as shown (fig. 1, page 3).If you operate the box in a

different position it can be damaged.

NOTE

If you wish to operate the cooler from the AC mains, set the battery

monitor to the “LOW” position.

NOTICE! Danger from excessively low temperature!

Ensure that the only those objects are placed in the cooler that are

intended to be cooled at the selected temperature.

NOTE

The temperature displayed is that of the middle of the interior.

The temperatures elsewhere can deviate from this temperature.

NOTE

When operating with the battery, the display switches off automatically

if the battery voltage is low. The LED “POWER” flashes orange.

CF35-CF50_OPM_EMEA16.book Seite 16 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50 Operation

17

6.6 Setting the temperature

➤ Press the “SET” button (fig. 3 4, page 3) once.

➤ Use the “UP +” (fig. 3 6, page 3) and “DOWN –” (fig. 3 7, page 3) buttons to

select the cooling temperature.

✓ The cooling temperature appears in the display for a few seconds. The display

flashes several times and then the current temperature is displayed again.

6.7 Switching off the cooler

➤ Empty the cooler.

➤ Switch the cooler off.

➤ Pull out the connection cable.

If you do not want to use the cooler for a longer period of time:

➤ Leave the cover slightly open. This prevents odour build-up.

6.8 Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the vaporiser. This

reduces the cooling capacity. Defrost the device in good time to avoid this.

A

To defrost the cooler, proceed as follows:

➤ Take out the contents of the cooling device.

➤ If necessary, place them in another cooling device to keep them cool.

➤ Switch off the device.

➤ Leave the cover open.

➤ Wipe off the defrosted water.

NOTICE! Danger of damage!

Never use hard or pointed tools to remove ice or to loosen objects

which have frozen in place.

CF35-CF50_OPM_EMEA16.book Seite 17 Dienstag, 9. Juli 2019 5:42 17

EN

Operation CF35, CF40, CF50

18

6.9 Replacing the device fuse

D

➤ Pull off the connection cable.

➤ Pry out the fuse insert (fig. 4 2, page 4) with a screwdriver.

➤ Replace the defective fuse with a new one that has the same rating (T4AL 250V).

➤ Press the fuse insert back into the housing.

6.10 Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (fig. 7 4, page 5) off of the plug.

➤ Unscrew the screw (fig. 7 5, page 5) out of the upper half of the housing

(fig. 7 1, page 5).

➤ Carefully raise the upper half of the housing from the lower (fig. 7 6, page 5)

half.

➤ Take out the contact pin (fig. 7 3, page 5).

➤ Replace the defective fuse (fig. 7 2, page 5) with a new one that has the same

rating (8 A, 32 V).

➤ Re-assemble the plug in the reverse order.

I

6.11 Replacing the light bulb

➤ Press the switch pin (fig. 8 2, page 5) downwards so that the transparent part

(fig. 8 1, page 5) of the lamp can be removed at the front.

➤ Replace the light bulb.

I

➤ Press the transparent part of the lamp back into the housing.

DANGER! Danger of electrocution!

Disconnect the connection cable before you replace the device fuse.

NOTE – Internal DC fuse

There is an additional DC fuse inside the device (Automotive standard

blade fuse, 10 A). This fuse can only be replaced by an authorised repair

centre.

NOTE

The LEDs in the light bulb must be aligned with the transparent part of

the lamp.

CF35-CF50_OPM_EMEA16.book Seite 18 Dienstag, 9. Juli 2019 5:42 17

EN

CF35, CF40, CF50 Cleaning and maintenance

19

7 Cleaning and maintenance

!

A

➤ Occasionally clean the device interior and exterior with a damp cloth.

➤ Make sure that the air inlet and outlet vents on the device are free of any dust and

dirt, so that heat can be released and the device is not damaged.

8Warranty

The statutory warranty period applies. If the product is defective, please contact the

manufacturer's branch in your country (see back page) or your retailer.

For repair and warranty processing, please include the following documents when

you send in the device:

• A copy of the receipt with purchasing date

• A reason for the claim or description of the fault

WARNING! Electrocution hazard

Always disconnect the device from the power supply before you clean

and service it.

NOTICE! Risk of damage

• Never clean the cooler under running water or in dish water.

• Do not use abrasive cleaning agents or hard objects during cleaning

as these can damage the cooler.

CF35-CF50_OPM_EMEA16.book Seite 19 Dienstag, 9. Juli 2019 5:42 17

EN

Troubleshooting CF35, CF40, CF50

20

9 Troubleshooting

Fault Possible cause Suggested remedy

Device does not

function, LED does

not glow.

There is no voltage

present in the 12/24 V

socket (cigarette lighter)

in your vehicle.

The ignition must be switched on in

most vehicles to apply current to the

cigarette lighter.

No voltage present in

the AC voltage socket.

Try using another plug socket.

The device fuse is

defective.

Replace the device fuse, see chapter

“Replacing the device fuse” on page 18.

The integrated mains

adapter is defective.

This can only be repaired by an

authorised repair centre.

The device does not

cool (plug is inserted,

“POWER” LED is lit).

Defective compressor. This can only be repaired by an

authorised customer services unit.

The device does not

cool (plug is inserted,

“POWER” LED flashes

orange, display is

switched off).

Battery voltage is too

low.

Test the battery and charge it as needed.

When operating from

the DC outlet:

The ignition is on

and the device is not

working and the LED

is not lit.

The DC outlet is dirty.

This results in a poor

electrical contact.

If the plug of your cooler becomes very

warm in the DC outlet, either the DC

outlet must be cleaned or the plug has

not been assembled correctly.

The fuse of the DC plug

has blown.

Replace the fuse in the DC plug, see

chapter “Replacing the plug fuse

(12/24 V)” on page 18.

The DC fuse inside the

device has blown.

This can only be repaired by an

authorised repair centre.

The vehicle fuse has

blown.

Replace the vehicle’s DC outlet fuse.

Please refer to your vehicle’s operating

manual.

The display shows an

error message (e.g.

“Err1”) and the appli-

ance does not cool.

The appliance has

switched off due to an

internal fault.

This can only be repaired by an

authorised repair centre.

CF35-CF50_OPM_EMEA16.book Seite 20 Dienstag, 9. Juli 2019 5:42 17

Stránka sa načítava ...

Dometic CF35, CF40, CF50 Návod na používanie

Táto príručka je tiež vhodná pre

Dometic CF35, CF40, CF50 Návod na používanie

V iných jazykoch

Súvisiace články