Philco PEW 941 BX Používateľská príručka

Typ
Používateľská príručka
RANGE HOOD
USER'S MANUAL
PEW 941 BX
2014 02/2015
Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user's manual.
EN - 1
2014 02/2015
CONTENTS
PART 1: IMPORTANT SAFETY INSTRUCTIONS ................................................................................................ 2
PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 4
PART 3: INSTALLATION .................................................................................................................................... 5
• Unpacking .........................................................................................................................................................................................5
Dimensions of the appliance ......................................................................................................................................................5
• Installation location .......................................................................................................................................................................7
• Installation .........................................................................................................................................................................................7
• Carbon lter ...................................................................................................................................................................................10
• Ventilation ...................................................................................................................................................................................... 11
PART 4: OPERATION ...................................................................................................................................... 12
• Operating tips ...............................................................................................................................................................................13
PART 5: MAINTENANCE AND CLEANING ...................................................................................................... 14
Changing a light bulb ................................................................................................................................................................ 14
• Cleaning ..........................................................................................................................................................................................14
PART 6: BEFORE YOU CALL THE SERVICE CENTRE ....................................................................................... 16
PART 7: TECHNICAL SPECIFICATIONS ........................................................................................................... 17
EN - 2
2014 02/2015
PART 1: IMPORTANT SAFETY INSTRUCTIONS
Safety notice
Symbols:
General advice for the optimal operation of the appliance
General dangers
Recommendation:
Carefully read these instructions before installing and operating this range hood.
Write down the serial number found on the rating label of the range hood in the space below. It is
essential that you store this user's manual in a safe place so that you can use it in the future. If you
intend to sell the appliance, give it to another owner, or if you move, always make sure that the user's
manual is attached to the appliance, so that the new owner can also learn about the operation of the
appliance and the relevant warnings.
SERIAL NUMBER:
Important safety instructions
This appliance is designed for household use only.
Before connecting the power cord plug, make sure the voltage stated on the rating label of the appliance
corresponds to the voltage in your wall socket. Connect the power cord plug to a power socket with a
voltage of 220 – 240 V ~ 50 Hz.
Only use a properly grounded power socket. The appliance may only be connected to a properly grounded
power socket.
All electrical connections must be performed by a quali ed electrician.
Installation performed by an unquali ed person may cause incorrect operation, damage to the appliance,
create a  re hazard or cause injury to persons.
Neither the manufacturer nor the vendor take responsibility for damages caused by incorrect or
unprofessional installation, connection or operation. Tampering with the appliance by an unquali ed
person will void the customer's right to a warranty repair.
Do not expose the power cord to excessive pressure or loads, do not place heavy objects on it, it must
not be tangled and it must not be stepped on. Do not locate the power cord in or on heat sources such
as stoves, heating or other generators of heat. Otherwise this may damage the power cord or create a  re
hazard.
Only connect the power cord plug to a power socket after the entire installation is completed.
The power plug serves as a disconnection device and for this reason the power socket must remain easily
accessible for the event of a dangerous situation, unless it is connected into a terminal box.
Do not touch the lights if the appliance has been running for some time. Lights heat up during operation
and may cause burns.
EN - 3
2014 02/2015
This appliance is designed for fume extraction during standard domestic use. Do not use the appliance
for purposes other than those for which it was designed. Otherwise you expose yourself to the risk of a
dangerous situation and voiding the warranty.
Follow the instructions for installation and ventilation (with the exception of when a  re stove is used).
Do not use the  ambé cooking method under the range hood.
Regularly replace the  lters in the range hood. Otherwise this presents a  re hazard.
Only use  lters suitable for use with the range hood. The manufacturer or distributor will recommend the
suitable  lter type.
Do not use the appliance without the aluminium  lter inserted. Do not take out the  lters while the
appliance is on.
Regularly clean the appliance to prevent a dangerous situation from occurring.
Before cleaning, replacing  lters, moving or any other maintenance, turn o the appliance and pull out the
power plug from the power socket, or turn o the respective circuit breaker.
If you are using another gas or natural gas appliance in the room at the same time, the fumes from this
appliance must be spatially isolated.
If a chimney is connected to the exhaust of the range hood, use pipes with a diameter of 150 or 120 mm.
The pipe connection should be as short as possible.
Keep packaging materials out of children's reach. They could su er injury or su ocation.
Children must be supervised to ensure that they do not play with the appliance. If the power cord is
damaged stop using the appliance. Have the power cord replaced at an authorised service centre or by
another quali ed person. Under no circumstances should you replace the power cord yourself.
To ensure safety, use a fuse with a maximum rating of 6 A.
Warning:
This appliance must not be used by persons (including children) with physical or mental impairments
or by inexperienced persons, unless properly trained or schooled in the safe use of the appliance, or
unless they have been properly supervised by a quali ed person who will be responsible for their
safety.
ATTENTION WHEN TRANSPORTING OR CARRYING
The packaging materials are from recyclable materials, so dispose of them in an environmentally conscientious
manner according to regulations in force.
During transport adhere to the symbols of the cardboard box.
When carrying the appliance, hold it by the respective handles.
Note:
We recommend that you keep the original packaging at least for the duration of the warranty
period for the event of repair or refund and transport to the authorised service centre. Adhere to the
symbols on the cardboard box.
If you do not have the original cardboard box, adhere to the following instructions:
a) Do not place any items on the appliance that could damage the appliance during transport.
b) Protect the appliance against impacts, falls, etc.
c) Wrap the appliance, e.g. in bubble wrap which will protect the appliance from damage.
Note:
The carbon  lter is not included.
Note:
If the building is equipped with a heat recovery system system, it is necessary to setup the
appliance for internal air circulation (without an exhaust). In that case, it is necessary to
purchase the carbon  lter.
EN - 4
2014 02/2015
PART 2: DESCRIPTION OF THE APPLIANCE
1. Inner chimney
2. Outer chimney
3. Control panel
4. Tempered glass
5. Filter
6. Lighting
REMOTE CONTROL OPTIONAL ACCESSORY
Turn the appliance on / o
Increase the exhaust power
Decrease the exhaust power
Turn the lights on / o .
EN - 5
2014 02/2015
PART 3: INSTALLATION
Unpacking
After unpacking remove all packaging and advertising labels from the appliance.
Check that the appliance has not been damaged and that the package includes all the items described in
this user's manual.
If the appliance was damaged during transport, contact authorised service centre.
Do not use a damaged appliance under any circumstances.
Important
Ensure that children do not play with the packaging material.
Dimensions of the appliance
IMPORTANT: Before installing or using the appliance, please  rst read all instructions and
check that the voltage and frequency values on the rating label correspond to the voltage and
frequency in your electricity grid.
We recommend that the appliance be connected by a service technician or another quali ed
person in compliance with local codes and regulations.
EN - 6
2014 02/2015
BEFORE STARTING THE INSTALLATION
Check that the purchased appliance has the correct dimensions corresponding to the chosen installation
location. Furthermore ensure that there is an electrical power socket available that will remain accessible
even after the range hood is installed.
Before installing the range hood, check that all necessary masonry work is complete.
Have all electrical connections performed by a quali ed person.
We recommend that you remove the aluminium  lters before installing the range hood.
Check that there are no packaging materials or other materials, e.g. user's manual, warranty card or bags
with screws, inside the appliance. These need to be taken out and kept for possible use in the future.
We recommend that you disconnect and move to the side freely standing or built in stoves so that you
have easier access to the rear wall or ceiling. If this is not possible place protective material on to the work
area, cooktop or stove. This will prevent damaging these surfaces.
Select an even surface for the necessary assembly of the range hood. Cover the surface with a protective
material and place all parts of the range hood and fastening elements on to it.
It is necessary that a quali ed technician inspects the suitability of the supplied fastening material and
other components for the speci c wall / ceiling type. The wall / ceiling must be su ciently strong to hold
the weight of the range hood.
Do not attach this range hood to a wall or cabinet furniture by tiling, plastering and do not glue it on using
silicone glue. The appliance is designed to only be installed on a wall / ceiling.
We recommend that always two people perform the installation of the appliance.
If your range hood is designed to be mounted to the ceiling, adhere to the following instructions.
1. The range hood must only be suspended on ceiling beams or on load bearing ceiling beam connections.
2. Do not suspend the range hood on false ceilings.
3. The ceiling must have a load bearing capacity of at least 40 kg.
4. The ceiling thickness must be at least 30 mm.
IMPORTANT:
THE RANGE HOOD MAY ONLY BE CONNECTED TO THE ELECTRICAL GRID AFTER THE ENTIRE
INSTALLATION IS COMPLETE.
EN - 7
2014 02/2015
Placement
Install the range hood at a height of at least 65 cm above an electric cooktop or at a height of 75 cm above a
gas cooktop.
75 cm
65 cm
Installation
1. Installation of hanging brackets
To hang the range hood it is necessary to  rst install 2 L-shaped hanging brackets, which are supplied together
with the screws, on to the range hood according to the illustration below. Then secure the brackets using
appropriate M5 x 40 screws into an M5 thread.
2. Installation of the non-return exhaust  ap
Install the non-return exhaust  ap on to the top part of the range hood using 3.5 x 9.5 screws according to the
illustration below.
EN - 8
2014 02/2015
3. Drilling mounting holes
Place the installation template against the wall and drill holes in points A, B, C using a drill bit with a diameter
of 8 mm. To install the chimney, drill holes using a drill bit with a diameter of 6 mm adhering to the dimensions
for the minimum and maximum height.
Drill 6 mm holes for the installation of the chimney mounting plate 15 mm under the ceiling (D, E).
Warning:
When drilling the mounting holes used for hanging the range hood, ensure the holes have the
correct diameter. If the holes are drilled incorrectly, then the correct assembly of the range
hood will not be possible.
4. Inserting dowels
Into the drilled holes A, B, C, D with a diameter of 10 mm, insert dowels with a diameter of 10 mm. Into the two
holes with a diameter of 6 mm, insert dowels with a diameter of 6 mm – see illustration below.
5. Attaching the hanging screws
Into holes A, B with 8mm dowels, insert the 5.5 x 60 hanging screws. The distance between the wall and the
head of the screw must be 5 mm.
6. Attaching the chimney plate
Drill holes into the wall using a drill bit with a diameter of 6 mm. Attach the chimney plate by screwing 3.9 x 22
Ysb screws into the plastic dowels with a diameter of 6 mm.
EN - 9
2014 02/2015
7. Hanging the range hood
Hang the range hood using the hanging brackets on to the screws in holes A and B – see illustration below.
8. Tightening the screws
After hanging the range hood, tighten the screws to secure the range hood in place.
Then tighten the screws inside the range hood.
9. Installation of the aluminium duct tube
Attach the  exible aluminium duct tube on to the air exhaust in the top part of the range hood and insert the
other end into the exhaust opening in the wall. Check that the connection is secure even at full power.
EN - 10
2014 02/2015
Check that tube is not bent in multiple places.
10. Installation of the outer chimney
Seat the chimneys on to the motor base. Screw the chimneys to the body of the appliance using 3.5 x 9.5
screws.
Screw in the inner part of the chimney to the mounting plate of the chimney using 3.5 x 9.5 screws.
After completing the installation check that the range hood is correctly installed and works properly.
Carbon  lter
If you are using the range hood without an air exhaust, it is necessary to use a carbon  lter. The carbon  lter is
not included. Contact your vendor or an authorised service centre to purchase this  lter.
Before installing or replacing the carbon  lter, check that the appliance is turned o and disconnected
from the power socket or that the respective circuit breaker is turned o .
It is necessary to replace the carbon  lter regularly every 3 – 5 months depending on how much the
appliance is used.
Never wash the carbon  lter in water unless the manufacturer states otherwise.
• Aluminium lters must always be installed even when the carbon  lter is not installed. Do not use the
appliance without the aluminium  lter installed.
EN - 11
2014 02/2015
REPLACING THE CARBON FILTER
1. For the correct operation of the appliance it is necessary to install a carbon  lter. The number and type
depends on the model.
2. Place the carbon  lter on the motor outlets and turn it in the clockwise direction.
3. To remove the carbon  lter turn it in the anticlockwise direction.
Ventilation
To ensure proper ventilation, leave windows closed while the appliance is turned on.
Warning:
Pay increased attention if you are using the appliance together with another appliance that uses air
or fuel for its operation (e.g. heating fan, fan, etc.) or that uses gas, coal or wood, as its operation may
negatively a ect the performance of the range hood because it expels air out of the room.
This warning does not apply if you installed the appliance without an exhaust out of the room.
EN - 12
2014 02/2015
PART 4: OPERATION
Remove the protective foil from the control panel.
Control panel
EXHAUST POWER SELECTION
This range hood is equipped with 5 levels of exhaust power. Select the power level based on the use of the
stove and the amount steam that the pots emit.
To turn on the motor press the button and to set the exhaust power level press the + or – button. Press the
+ button to increase the exhaust power and the – button to reduce the exhaust power.
BOOST INTENSIVE VENTILATION MODE
The model have been purchased has intensive ventilation mode with the intent of energy e ciency.
Boost Mode: Product symbol (b) will be appearing on the screen when the latest speed is in use .
The symbol b signi es boost mode ( intensive ventilation) is active.
Product will be working along 6 minutes with this mode and the symbol b will blink during this time.
At the end of 6 minutes product will be passing to lower speed level automatically and will proceed working
in this speed level.
Note:
Timer feature is not used in boost mode.
AUTOMATIC TIMER TIMER
All models with a remote control are equipped with an automatic timer.
Press and hold the
button at the set exhaust power level for at least 2 seconds and the automatic timer
function will be turned on for a period of 15 minutes. When the function is turned on, the respective symbol
will appear on the display and the motor will turn o automatically after 15 minutes.
Note:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend
to leave the range hood running a few minutes longer than the stove to ensure that all odours are
extracted.
EN - 13
2014 02/2015
LIGHTING
The range hood is equipped with 2 lights. Press the button with the light symbol to turn on the lights. Press the
button again to turn the lights o .
Operating tips
1. Regularly clean the aluminium  lters and regularly replace the carbon  lters.
2. Use the medium exhaust power level. Only use the highest power level when necessary.
3. To ensure proper ventilation, leave windows closed while the appliance is turned on.
EN - 14
2014 02/2015
PART 5: MAINTENANCE AND CLEANING
Warning:
Before cleaning, regular or other maintenance, installation or removal, check that the appliance is
turned o and disconnected from the power socket or that the respective circuit breaker is turned o .
Changing a light bulb
• Turn o the appliance.
Open the top cover of the range hood.
Take out the aluminium  lter.
Disconnect cables going to the lighting.
Push the light bulb in to remove it.
Remove the protective tape between the light bulb and the appliance.
Remove the protective tape from the new light bulb.
Note:
Do not hold the light bulb with your bare hands. Dirt or sweat from the hand may shorten their
lifetime.
If the light bulb broke during operation wait until it cools down.
Cleaning
• Aluminium lters capture dust and fat from the extracted air.
It is necessary to regularly wash these  lters, ideally once a month, depending on the level of use. Wash the
lters in water with dishwashing detergent, or you may place the  lters in a dishwasher and wash them
using a gentle program (max. 60°C).
Take out the aluminium  lters by pressing the clip.
After cleaning allow the aluminium  lters to dry thoroughly before reinstalling them.
Wipe the outer surface of the range hood with a clean damp wiping cloth lightly dipped in water with a
small amount of dishwashing detergent. Then wipe dry.
Avoid electrical parts coming into contact with water or another liquid.
For cleaning you can also use special agents for the maintenance and cleaning of INOX surfaces (applies
only for models with an INOX surface treatment).
CLEANING THE ALUMINIUM FILTERS
The aluminium  lters must be cleaned regularly.
Clean the  lters according to the instructions above.
EN - 15
2014 02/2015
Warning:
For cleaning do not use petrol, benzene, thinners or any other solvents, coarse cleaning agents,
steel wool or any sponges with steel wool.
Warning:
You may put the aluminium  lters in a dishwasher. The colour of the aluminium  lters may
change after several washes. This is normal.
EN - 16
2014 02/2015
PART 6: BEFORE YOU CALL THE SERVICE CENTRE
If the appliance is not working as it should check the following recommendations for resolving the most
common problems.
If the problem persists or it is not included in the table below, turn o the appliance and disconnect it from the
power socket and contact an authorised service centre.
Problem Solution
The range hood is not working. Check that the power plug is properly inserted in a
properly grounded power socket with the parameters 220
– 240 V ~ 50 Hz.
Check that the motor power switch is in the "On" position.
The lights are not working. Check that the power plug is properly inserted in a
properly grounded power socket with the parameters 220
– 240 V ~ 50 Hz.
Check that the motor power switch is in the "On" position.
Check whether the light bulb or  uorescent tube is broken.
Exhaust power is weak. Check whether the aluminium  lters are dirty.
Check the air outlet, it should be open.
Check whether the carbon  lter is not too dirty.
The range hood does not extract the air
directly out (for models without an exhaust).
Check whether the aluminium  lters are dirty.
Check whether the carbon  lter is not too dirty.
Attention:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend
to leave the range hood running a few minutes longer than the stove to ensure that all odours are
extracted.
EN - 17
2014 02/2015
PART 7: TECHNICAL SPECIFICATIONS
PEW
SPEED 1
Voltage (A) 0.5 0.6
Power (W) 105 90
Air  ow (m³/h) 180 230
Pressure (mmH20) 130 155
Noise level (dB) 36 35
SPEED 2
Voltage (A) 0.6 0.9
Power (W) 125 120
Air  ow (m³/h) 260 310
Pressure (mmH20) 200 205
Noise level (dB) 43 42
SPEED 3
Voltage (A) 0.7 1.5
Power (W) 145 185
Air  ow (m³/h) 335 500
Pressure (mmH20) 265 245
Noise level (dB) 48 52
SPEED 4
Voltage (A) 0.8
Power (W) 170
Air  ow (m³/h) 450
Pressure (mmH20) 310
Noise level (dB) 53
SPEED 5
Voltage (A) 1
Power (W) 210
Air  ow (m³/h) 750
Pressure (mmH20) 350
Noise level (dB) 61
Input voltage 220 - 240 V~ 50 Hz 220 - 240 V~ 50 Hz
Air outlet diameter 150 mm 120 mm
NOTE:
All the here mentioned data is subject to change.
EN - 18
2014 02/2015
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of packaging material at apublic waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
The meaning of the symbol on the product, its accessory or packaging indicates that this
product shall not be treated as household waste. Please, dispose of this product at your applicable
collection point for the recycling of electrical & electronic equipment waste. Alternatively in some
states of the European Union or other European states you may return your products to your local
retailer when buying an equivalent new product. The correct disposal of this product will help save
valuable natural resources and help in preventing the potential negative impact on the environment
and human health, which could be caused as aresult of improper liquidation of waste. Please ask
your local authorities or the nearest waste collection centre for further details. The improper disposal
of this type of waste may fall subject to national regulations for  nes.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from
your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal
method from local government departments or from your seller.
This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design and technical speci cations may occur without prior notice and we reserve the
right to make these changes.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Philco PEW 941 BX Používateľská príručka

Typ
Používateľská príručka

V iných jazykoch