Dell OptiPlex 745c Návod na obsluhu

www.dell.com | support.dell.com

Dell™ OptiPlex™ 745c

Quick Reference Guide

Model DCSM

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft

®

Windows

®

operating systems are not applicable.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc.; Intel is registered trademarks of Intel Corporation;

Microsoft, Windows, and Vista are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model DCSM

February 2007 P/N NJ423 Rev. A00

Contents 3

Contents

Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

System Views

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mini Tower Computer — Front View

. . . . . . . . . . . . . . . . . . . . . 8

Mini Tower Computer — Back View

. . . . . . . . . . . . . . . . . . . . 10

Mini Tower Computer — Back-Panel Connectors

. . . . . . . . . . . . . 11

Removing the Computer Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . 13

Before You Begin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Mini Tower Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Inside Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Mini Tower Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Setting Up Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Set Up Your Keyboard and Mouse

. . . . . . . . . . . . . . . . . . . . . 20

Set Up Your Monitor

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Power Connections

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Solving Problems

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Dell Diagnostics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

System Lights

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Diagnostic Lights

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Beep Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Resolving Software and Hardware Incompatibilities

. . . . . . . . . . . 28

Using Microsoft Windows XP System Restore

. . . . . . . . . . . . . . . 28

Reinstalling Microsoft Windows XP

. . . . . . . . . . . . . . . . . . . . 30

Microsoft

®

Windows Vista™ . . . . . . . . . . . . . . . . . . . . . . . . 32

The support.dell.com user interface may vary depending

on your selections.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Using the Drivers and Utilities CD

. . . . . . . . . . . . . . . . . . . . . . . . 34

Drivers for Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . 34

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4 Contents

Quick Reference Guide 5

Finding Information

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may

not be available in certain countries.

NOTE: Additional information may ship with your computer.

What Are You Looking For? Find It Here

• A diagnostic program for my computer

• Drivers for my computer

• My computer documentation

• My device documentation

• Desktop System Software (DSS)

Drivers and Utilities CD (ResourceCD)

NOTE: The Drivers and Utilities CD may be optional

and may not ship with your computer.

Documentation and drivers are already installed on

your computer. You can use the CD to reinstall

drivers (see "Using the Drivers and Utilities CD" on

page 34), run the Dell Diagnostics (see "Dell

Diagnostics" on page 21), or access your

documentation.

Readme files may

be included on your

CD to provide last-

minute updates

about technical

changes to your

computer or

advanced technical

reference material

for technicians or

experienced users.

NOTE: Drivers and documentation updates can be

found at support.dell.com.

• How to remove and replace parts

• Specifications

• How to configure system settings

• How to troubleshoot and solve problems

Dell™ OptiPlex™ User’s Guide

Microsoft Windows XP Help and Support Center

1

Click

Start

→

Help and Support

→

Dell User and

System Guides

→

System Guides

.

2

Click the

User’s Guide

for your computer.

The User’s Guide is also available on the optional

Drivers and Utilities CD.

6 Quick Reference Guide

• Warranty information

• Terms and Conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

Dell™ Product Information Guide

• How to reinstall my operating system

Operating System CD

NOTE: The Operating System CD may be optional and

may not ship with your computer.

The operating system is already installed on your

computer. To reinstall your operating system, use

the Operating System CD (see "Reinstalling

Microsoft Windows XP" on page 30).

After you reinstall

your operating

system, use the

optional Drivers and

Utilities CD

(ResourceCD) to

reinstall drivers for

the devices that

came with your

computer. For more

information, see

"Drivers and Utilities CD (ResourceCD)" on page 5.

Your operating system product key label is located

on your computer (see "Service Tag and Microsoft

®

Windows

®

Product Key" on page 7).

NOTE: The color of your Operating System CD varies

according to the operating system you ordered.

• How to use Windows XP

• How to work with programs and files

• How to personalize my desktop

Windows Help and Support Center

1

Click

Start

→

Help and Support

.

2

Type a word or phrase that describes your problem

and click the arrow icon.

3

Click the topic that describes your problem.

4

Follow the instructions on the screen.

What Are You Looking For? Find It Here

Quick Reference Guide 7

• Service Tag and Express Service Code

• Microsoft Windows Product Key Label

Service Tag and Microsoft

®

Windows

®

Product Key

These labels are located on your computer.

• Use the Service

Tag to identify

your computer

when you use

support.dell.co

m

or contact

support.

• Enter the Express Service Code to direct your call

when contacting support.

• Solutions — Troubleshooting hints and tips, articles

from technicians, online courses, and frequently asked

questions

• Community — Online discussion with other Dell

customers

• Upgrades — Upgrade information for components, such

as the memory, hard drive, and operating system

• Customer Care — Contact information, service call and

order status, and warranty and repair information

• Service and support — Service call status, support

history, service contract, and online discussions with

support

• Reference — Computer documentation, details on my

computer configuration, product specifications, and

white papers

• Downloads — Certified drivers, patches, and software

updates

• Desktop System Software (DSS)— If you reinstall the

operating system on your computer, you should also

reinstall the DSS utility. DSS automatically detects your

computer and operating system and installs the updates

appropriate for your configuration, providing critical

updates for your operating system and support for Dell™

3.5-inch USB floppy drives, Intel

®

processors, optical

drives, and USB devices. DSS is necessary for correct

operation of your Dell computer.

Dell Support Website — support.dell.com

NOTE: Select your region or business segment to

view the appropriate support site.

To download Desktop System Software:

1

Go to

support.dell.com

, select your region or

business segment, then enter your Service Tag.

2

Select

Drivers & Downloads

, then click

Go

.

3

Click your operating system, and then search for

the keyword

Desktop System Software

.

NOTE: The support.dell.com user interface may vary

depending on your selections.

What Are You Looking For? Find It Here

8 Quick Reference Guide

System Views

Mini Tower Computer — Front View

3

11

10

6

7

2

8

5

4

1

9

Quick Reference Guide 9

1 5.25-inch drive bay Can contain an optical drive. Insert a CD or DVD (if supported) into this drive.

2 5.25-inch drive bay Can contain an optical drive. Insert a CD or DVD (if supported) into this drive.

3 3.5-inch drive bay Can contain an optional floppy drive or optional media card reader.

4 USB 2.0 connectors (2) Use the front USB connectors for devices that you connect occasionally, such as

joysticks or cameras, or for bootable USB devices (see your online User’s Guide

for more information on booting to a USB device).

It is recommended that you use the back USB connectors for devices that

typically remain connected, such as printers and keyboards.

5 LAN indicator light This light indicates that a LAN (local area network) connection is established.

6 diagnostic lights Use the lights to help you troubleshoot a computer problem based on the

diagnostic code. For more information, see "Diagnostic Lights" on page 25.

7 power button Press this button to turn on the computer.

NOTICE: To avoid losing data, do not turn off the computer by pressing the

power button. Instead, perform an operating system shutdown. See "Before

You Begin" on page 13 for more information.

NOTICE: If your operating system has ACPI enabled, when you press the

power button the computer will perform an operating system shutdown.

8 power light The power light illuminates and blinks or remains solid to indicate different

operating modes:

• No light — The computer is turned off.

• Steady green — The computer is in a normal operating state.

• Blinking green — The computer is in a power-saving mode.

• Blinking or solid amber — See

your online User’s Guide

.

To exit from a power-saving mode, press the power button or use the keyboard or

the mouse if it is configured as a wake device in the Windows Device Manager.

For more information about sleep modes and exiting from a power-saving mode,

see your online User’s Guide.

See "System Lights" on page 24 for a description of light codes that can help you

troubleshoot problems with your computer.

9 hard-drive activity light This light flickers when the hard drive is being accessed.

10 headphone connector Use the headphone connector to attach headphones and most kinds of speakers.

11 microphone connector Use the microphone connector to attach a microphone.

10 Quick Reference Guide

Mini Tower Computer — Back View

4

3

5

6

2

1

Quick Reference Guide 11

Mini Tower Computer — Back-Panel Connectors

1 cover-release latch This latch allows you to open the computer cover.

2 padlock ring Insert a padlock to lock the computer cover.

3 voltage selection switch Your computer is equipped with a manual voltage-selection switch.

To help avoid damaging a computer with a manual voltage-selection switch, set

the switch for the voltage that most closely matches the AC power available in

your location.

NOTICE: The voltage selection switch must be set to the 115-V position even

though the AC power available in Japan is 100 V.

Also, ensure that your monitor and attached devices are electrically rated to

operate with the AC power available in your location.

4 power connector Insert the power cable.

5 back-panel connectors Plug serial, USB, and other devices into the appropriate connectors (see "Mini

Tower Computer — Back-Panel Connectors" on page 11).

6 card slots Access connectors for any installed PCI and PCI Express cards.

13

98 7

5

6

24

12 Quick Reference Guide

1 parallel connector Connect a parallel device, such as a printer, to the parallel connector. If you have a

USB printer, plug it into a USB connector.

NOTE: The integrated parallel connector is automatically disabled if the computer

detects an installed card containing a parallel connector configured to the same

address. For more information, see your online User’s Guide.

2 link integrity light

• Green — A good connection exists between a 10-Mbps network and the

computer.

• Orange — A good connection exists between a 100-Mbps network and the

computer.

• Yellow — A good connection exists between a 1-Gbps (or 1000-Mbps) network

and the computer.

• Off — The computer is not detecting a physical connection to the network.

3 network adapter

connector

To attach your computer to a network or broadband device, connect one end of a

network cable to either a network jack or your network or broadband device.

Connect the other end of the network cable to the network adapter connector on

the back panel of your computer. A click indicates that the network cable has been

securely attached.

NOTE: Do not plug a telephone cable into the network connector.

On computers with a network connector card, use the connector on the card.

It is recommended that you use Category 5 wiring and connectors for your

network. If you must use Category 3 wiring, force the network speed to 10 Mbps to

ensure reliable operation.

4 network activity light Flashes a yellow light when the computer is transmitting or receiving network

data. A high volume of network traffic may make this light appear to be in a steady

"on" state.

5 line-out connector Use the green line-out connector to attach most speakers with integrated

amplifiers.

6 line-in/microphone

connector

Use the blue and pink line-in/microphone connector to attach a record/playback

device such as a cassette player, CD player, or VCR.; or a personal computer

microphone for voice or musical input into a sound or telephony program.

7 USB 2.0 connectors (6) Use the back USB connectors for devices that typically remain connected, such as

printers and keyboards.

8 video connector Plug the cable from your VGA-compatible monitor into the blue connector.

NOTE: If you purchased an optional graphics card, this connector will be covered by

a cap. Connect your monitor to the connector on the graphics card. Do not remove

the cap.

NOTE: If you are using a graphics card that supports dual monitors, use the y-cable

that came with your computer.

9 serial connector Connect a serial device, such as a handheld device, to the serial port. The default

designations are COM1 for serial connector 1 and COM2 for serial connector 2.

For more information, see your online User’s Guide.

Quick Reference Guide 13

Removing the Computer Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the cover.

Before You Begin

NOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn off

your computer.

1

Shut down the operating system:

a

Save and close any open files, exit any open programs, click the

Start

button, and then click

Turn Off Computer

.

b

In the

Turn off computer

window, click

Turn of f

.

The computer turns off after the operating system shutdown process finishes.

2

Ensure that the computer and any attached devices are turned off. If your computer and attached

devices did not automatically turn off when you shut down your operating system, turn them off now.

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help

ensure your own personal safety.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a

card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by

its pins.

NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing

that is not authorized by Dell is not covered by your warranty.

NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself.

Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking

tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any

connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.

To avoid damaging the computer, perform the following steps before you begin working inside the

computer.

1

Turn off your computer.

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the

network wall jack.

2

Disconnect any telephone or telecommunication lines from the computer.

14 Quick Reference Guide

3

Disconnect your computer and all attached devices from their electrical outlets, and then press the

power button to ground the system board.

4

If applicable, remove the computer stand (for instructions, see the documentation that came with the

stand).

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the cover.

5

Remove the computer cover. See "Mini Tower Computer" on page 14.

NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,

such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to

dissipate any static electricity that could harm internal components.

Mini Tower Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the computer cover.

1

Follow the procedures in "Before You Begin" on page 13.

2

Lay the computer on its side as shown in the illustration.

3

Locate the cover release latch shown in the illustration. Then, slide the release latch back as you lift the

cover.

4

Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage points.

5

Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.

CAUTION: Graphic card heatsinks may become very hot during normal operation. Ensure that a graphic card

heatsink has had sufficient time to cool before you touch it.

Quick Reference Guide 15

1 security cable slot 2 cover release latch 3 padlock ring

2

1

3

16 Quick Reference Guide

Inside Your Computer

Mini Tower Computer

1 optical drive 2 floppy drive 3 power supply

4 chassis-intrusion switch 5 system board 6 heat-sink assembly

7 hard drive

1

3

5

4

7

2

6

Quick Reference Guide 17

System Board Components

MFG_MODE

1

2

4

7

15

9

16

17

10

5

6

3

11

12

19

20

18

21

14

13

8

18 Quick Reference Guide

Jumper Settings

NOTE: Do not populate the MFG_MODE jumper. Active Management technology will not function properly. Only

manufacturing uses this jumper.

1 fan connector (FAN) 12 internal USB (INTERNAL_USB)

2 processor connector (CPU) 13 battery socket (BATT)

3 processor power connector (12VPOWER) 14 PCI Express x16 connector (SLOT1)

4 memory module connectors (DIMM_1, DIMM_2,

DIMM_3, DIMM_4)

15 PCI Express x1 connector (SLOT4)

5 RTC reset jumper (RTCRST) 16 PCI connector (SLOT2)

6 password jumper (PSWD) 17 PCI connector (SLOT3)

7 SATA drive connectors (SATA0, SATA1, SATA4, SATA5) 18 serial connector (SER2)

8 manufacturing mode jumper (MFG_MODE) 19 floppy drive connector (DSKT)

9 front-panel connector (FNT_PANEL) 20 system board speaker (BEEP)

10 power connector (POWER) 21 speaker connector (INT_SPKR)

11 intrusion switch connector (INTRUDER)

Jumper Setting Description

PSWD Password features are enabled

(default setting).

Password features are

disabled.

RTCRST The real-time clock has

not been reset.

The real-time clock is being reset

(jumpered temporarily).

jumpered unjumpered

Quick Reference Guide 19

Setting Up Your Computer

CAUTION: Before performing any of the procedures in this section, follow the safety instructions in

Product Information Guide.

NOTICE: If your computer has an expansion card installed (such as a modem card), connect the appropriate cable

to the card, not to the connector on the back panel.

NOTICE: To help allow the computer to maintain proper operating temperature, ensure that you do not place the

computer too close to a wall or other storage compartment that might prevent air circulation around the chassis.

See your Product Information Guide for more information.

NOTE: Before you install any devices or software that did not ship with your computer, read the documentation

that came with the device or software, or contact the vendor to verify that the device or software is compatible

with your computer and operating system.

You must complete all the steps to properly set up your computer. See the appropriate figures that follow

the instructions.

NOTICE: Do not attempt to operate a PS/2 mouse and a USB mouse simultaneously.

1

Connect the keyboard and mouse.

NOTICE: Do not connect a modem cable to the network adapter connector. Voltage from telephone

communications can cause damage to the network adapter

2

Connect the modem or network cable.

Insert the network cable, not the telephone line, into the network connector. If you have an optional

modem, connect the telephone line to the modem.

3

Connect the monitor.

Align and gently insert the monitor cable to avoid bending connector pins. Tighten the thumbscrews

on the cable connectors.

NOTE: Some monitors have the video connector underneath the back of the screen. See the documentation

that came with your monitor for its connector locations.

4

Connect the speakers.

5

Connect power cables to the computer, monitor, and devices and connect the other ends of the power

cables to electrical outlets.

NOTICE: To avoid damaging a computer with a manual voltage-selection switch, set the switch for the voltage that

most closely matches the AC power available in your location.

NOTICE: In Japan, the voltage selection switch must be set to the 115-V position even though the AC power

available in Japan is 100 V.

6

Verify that the voltage selection switch is set correctly for your location.

Your computer has a manual voltage-selection switch. Computers with a voltage selection switch on

the back panel must be manually set to operate at the correct operating voltage.

20 Quick Reference Guide

Set Up Your Keyboard and Mouse

Set Up Your Monitor

Stránka sa načítava ...

Dell OptiPlex 745c Návod na obsluhu

Dell OptiPlex 745c Návod na obsluhu

V iných jazykoch