Philco PD 1070 Návod na obsluhu

Kategória
Umývačky riadu
Typ
Návod na obsluhu
DISHWASHER
USER'S MANUAL
PD 1070
Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user's manual.
EN - 1
03/2012Copyright © 2012, Fast ČR, a. s.
CONTENTS
PART 1: BEFORE PUTTING INTO OPERATION ................................................................................................. 2
 Important safety instructions .....................................................................................................................................................2
PART 2: DESCRIPTION OF THE PRODUCT ....................................................................................................... 5
PART 3: INSTALLATION .................................................................................................................................... 6
 Unpacking .........................................................................................................................................................................................6
 Placement ..........................................................................................................................................................................................6
 Electrical connection .....................................................................................................................................................................7
 Water supply .....................................................................................................................................................................................7
 Connecting the drain hose ..........................................................................................................................................................8
 Built-in .................................................................................................................................................................................................9
PART 4: CONTROL PANEL .............................................................................................................................. 11
 Before  rst use .............................................................................................................................................................................. 12
 Water softener ..............................................................................................................................................................................12
 Adding salt ..................................................................................................................................................................................... 13
 Adding rinsing aid ....................................................................................................................................................................... 15
 Function of the detergent ........................................................................................................................................................ 16
 Dosage of the detergent ........................................................................................................................................................... 17
PART 5: WASHING DISHES / CUTLERY .......................................................................................................... 18
 Filling the upper rack ..................................................................................................................................................................19
 Filling the lower rack ..................................................................................................................................................................19
 Setting the upper rack ...............................................................................................................................................................20
 Tilting down the tines in the upper rack ............................................................................................................................. 21
 Setting the lower rack ................................................................................................................................................................ 21
 Basket for cutlery ......................................................................................................................................................................... 22
 Turning on the appliance / starting a washing program .............................................................................................. 24
 Changing a program .................................................................................................................................................................. 24
PART 6: MAINTENANCE AND CLEANING ...................................................................................................... 26
 Filtration system ...........................................................................................................................................................................26
 Installing the  lter ....................................................................................................................................................................... 26
 Cleaning the  lter ........................................................................................................................................................................ 27
 Dishwasher care ........................................................................................................................................................................... 27
 Protection against frost ............................................................................................................................................................. 28
PART 7: PREVENTION OF MINOR MALFUNCTIONS ..................................................................................... 30
 Error codes ..................................................................................................................................................................................... 32
PART 8: TECHNICAL SPECIFICATIONS ........................................................................................................... 33
EN - 2
03/2012Copyright © 2012, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Important safety instructions
 Read carefully and store for future use.
 The safety of this appliance complies with industry norms and meets legal appliance safety requirements.
However, as manufacturers, we consider it our duty to provide you with the following safety instructions.
 It is essential that you store this user's manual in a safe place so that you can use it in the future.
If you intend to sell the appliance, give it to another owner, or if you move, always make sure that the user's
manual is attached to the appliance, so that the new owner can  nd out about the operation of the appliance
and the relevant warnings.
 Before installation or operation of the appliance you MUST carefully read all the safety instructions
and the user's manual.
 Before putting the appliance into operation for the  rst time, check that it has not been damaged during
transport.
 If the appliance is supplied in the winter months, when the temperature falls under 0°C, store the appliance
at room temperature for 24 hours before  rst use.
 This dishwasher is designed for washing household dishwasher-safe dishes. Use the dishwasher only for the
purposes for which it was designed. The dishwasher is designed for a maximum of 10 sets of dishes!
 This appliance must not be used by any persons (including children) with mental disabilities, weak strength
or by inexperienced persons, unless they have been properly trained or schooled in the safe use of the
product,or unless they are properly supervised by a quali ed person who is responsible for their safety.
 Children must be supervised to ensure that they do not play with the appliance.
Installation
 Check that the dishwasher has not been damaged during transport. Never connect a damaged appliance.
If the dishwasher is damaged, contact the supplier.
 It is necessary to remove all packaging from the dishwasher before it is used. Dispose of the packaging
materials in a proper manner. Do not allow children to play with the packaging material. There is a danger
of su ocation!
 The electrical and plumbing installation necessary for the connection of this dishwasher may only be
performed by a person with relevant quali cations.
 Maximum permitted water pressure is 1 Mpa. Minimum permitted water pressure is 0.03 Mpa.
 Connect the appliance to the water source using a new hose, do not use a used hose.
 The power cord must not be excessively or dangerously bent or pressed during the installation.
 For safety reasons, changing the technical parameters, or making any other modi cations to the appliance
is dangerous.
 Never use the dishwasher, if the electrical connection or the water hose are damaged, or if the control
panel, workbench or its support is damaged, when the inside of the appliance is freely accessible. Contact
a local service centre to avoid exposing yourself to possible dangers.
 You must not drill into any side of the dishwasher so that you do not damage the plumbing and electrical
components.
 Do not turn on your dishwasher until all covers are properly installed.
WARNING!
When using the dishwasher follow all the notices below.
EN - 3
03/2012Copyright © 2012, Fast ČR, a. s.
Grounding instructions
 This appliance must be grounded. In the event of a failure or malfunction the grounding will reduce the
risk of injury by electrical shock by ensuring a lower resistance to the electrical current. This appliance is
equipped with a power cord with a grounding conductor and power plug.
 You must connect the power plug into an appropriate power socket installed and grounded in accordance
with local laws and regulations.
WARNING!
 The incorrect connection of the grounding conductor may create a risk of injury by electrical
shock.
 If you have any doubts about the proper grounding of the appliance, ask a quali ed electrician
or service technician for veri cation. Do not modify the power plug included with the
appliance, if it does not  t into the power socket. Ask a quali ed electrician to install a proper
power socket.
Correct use
 Before inserting dishes or kitchen utensils, check that they are suitable for washing in a dishwasher. The
manufacturer of the dishes or kitchen utensils will provide more details, or such information is included
in the attached documentation. Not adhering to this notice may lead to the damage of dishes or kitchen
utensils, or also the appliance. The warranty does not cover this kind of damage.
 Do not wash plastic items in the dishwasher unless they are marked by the manufacturer as dishwasher-
safe. For plastic items without such markings, follow the recommendations of the manufacturer.
 When using the dishwasher you should prevent the plastic items from coming into contact with the
heating element. (These instructions are intended only for dishwashers with freely accessible heating
elements.)
 Use only agents (detergents and rinsing aids, salt and polishing agents) designed to be used with
automatic dishwashers.
 Never use soap, washing or cleaning detergents designed for hand washing. Keep all these substances out
of the reach of children.
 Store all cleaning agents in a safe place. Keep children away from all washing and rinsing agents and at
a su cient distance from the open dishwasher door, because there could be remains of detergents inside.
 Do not use any solvents in the dishwasher. The could cause an explosion.
 Dishwasher detergents are very alkaline and their ingestion may be life threatening! Avoid contact with
the skin or eyes, because there is a danger of chemical burns of eyes or skin. Keep children at a su cient
distance from the dishwasher when the door is open. Follow the safety instructions of the dishwasher
detergent manufacturer.
 The water inside the dishwasher is not intended for drinking. It may contain remains of detergents.
 Place sharp items in such a way that they do not damage the door seal.
WARNING!
Knives and other utensils with sharp tines and blades must be placed inside the basket with tips
facing downwards or in a horizontal position.
 Ensure that the dishwasher door is always closed, except for the time when dishes are being inserted or
removed. This will prevent the danger of tripping over the door and subsequent injury. If the door is open,
do not allow children to come close to the dishwasher.
EN - 4
03/2012Copyright © 2012, Fast ČR, a. s.
WARNING!
Do not sit on the door or on the wire racks, do not stand on them or handle them with brute force.
Do not touch the heating elements during operation or immediately afterwards.
(These instructions are intended only for dishwashers with freely accessible heating elements.)
Do not place any heavy items on the door when it is open and do not stand on it. The appliance
could tip over.
 Open the dishwasher carefully during operation so that water does not spray out and so that you do not
get scalded by the escaping steam.
 Do not pull any dishes out of the dishwasher until the cycle is completed.
 After the completion of a washing cycle, check that the detergent compartment is empty.
 After using the dishwasher, disconnect it from the power source and turn o the water supply.
 Under no circumstances tamper with the control buttons.
Servicing, disposal
 If it is necessary to repair the appliance, contact an authorised service technician, who should use only
original spare parts.
 If the power cord is damaged it must be replaced by the manufacturer or the manufacturer's service
technician, to prevent injury to persons or damage to the appliance.
 Never attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may lead to
injuries or serious damage to the appliance. Contact a local service centre. Always request original spare
parts.
 When taking an old dishwasher out of service or when disposing it, remove the dishwasher door. This
will prevent children or animals from closing themselves inside the dishwasher and prevent this life
threatening situation.
EN - 5
03/2012Copyright © 2012, Fast ČR, a. s.
PART 2: PRODUCT DESCRIPTION
1.
2.
3.
4.
5.
6.
7.
8.
13.
12.
11.
10.
9.
1. Top cover 8. Control panel
2. Upper rack with cup shelf 9. Detergent and rinsing aid compartment
3. Top spraying arm 10. Basket for cutlery
4. Lower rack 11. Salt compartment (located in the bottom part of the appliance)
5. Bottom spraying arm 12. Rail of the upper rack
6. Filters 13. Ceiling jet - ensures better washing of dishes in the upper rack
7. Rating label
EN - 6
03/2012Copyright © 2012, Fast ČR, a. s.
PART 3: INSTALLATION
Unpacking
Remove the external packaging, remove the protective plastic  lm from the surface of the appliance (if used)
and clean the external parts of the appliance with an agent designed for this purpose. Do not use steel wool or
any coarse agents, which could irreparably damage the surface of the appliance. Carefully remove all papers
and adhesive tape from the appliance, doors and other parts packed in polystyrene. Remove documents and
accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,
because they present a possible source of danger.
Carefully inspect the appliance. If you discover any faults, stop the installation and contact the vendor.
Placement
Place the appliance in the desired location. The dishwasher is equipped with a water supply hose and a drain
hose, which can be connected either on the right or left hand side of the dishwasher.
Levelling the appliance
After placing the dishwasher in its place it is not level, you can level it by using the levelling feet. Under no
circumstances should the dishwasher be tilted by more than 2°.
Connecting to a power source
WARNING!
For reason of personal safety:
Do not connect to an extension cord or a multi-plug socket. Under no circumstances remove or cut
away grounding from the power cord.
Power source demands
Information about the required voltage for the connection of the dishwasher to a suitable power source is
contained on the appliance's rating label. Use the required 10 - 16A fuse, the recommended delaying fuse or
circuit breaker and ensure that this appliance has its own independent electrical circuit.
Before use, check that the appliance is properly grounded.
EN - 7
03/2012Copyright © 2012, Fast ČR, a. s.
Electrical connection
Check that the voltage and frequency of the used power source correspond to the information on the
appliance's rating label. Insert the power plug only into a properly grounded power socket. If the socket to
which the appliance will be connected is not properly grounded, replace the socket rather than using adapters,
etc., which could lead to overheating or burning.
WARNING!
 The incorrect connection of the grounding conductor may create a risk of injury by electrical shock.
 If you have any doubts about the proper grounding of the appliance, ask a quali ed electrician
or service technician for veri cation.
 Do not modify the power plug supplied with the appliance. If the power plug does not correctly
t into your power socket, ask a quali ed electrician to replace it.
Water supply
How to connect the water supply hose?
You must connect the dishwasher to a water supply using a new hose. Do not use perished, old or otherwise
damaged hoses.
Water pressure must be in the range 0.03 MPa to 1 MPa. If the water pressure in your system is lower, ask for
advice from our service department.
 Pull out the hose fully from the storage area in the rear part of the dishwasher.
 Screw in the water supply hose to a tap with a 3/4" thread.
 Fully open the water supply before turning on the dishwasher.
Water supply hose
The water supply hose has double wall. The water  lling system guarantees intervention by blocking the water
supply in the event that the water supply hose fails.
WARNING!
The hose connected to the water supply to the sink may break, if the sink is connected to the same
water system as the dishwasher. We recommend that you disconnect the hose and seal the opening.
EN - 8
03/2012Copyright © 2012, Fast ČR, a. s.
How to disconnect the water supply hose?
 Shut o the water inlet.
 Reduce water pressure by pressing the reduce pressure button. This will reduce the water pressure and
prevent water from possibly squirting out into the room.
 Unscrew the water supply hose from the water tap.
WARNING!
To prevent water from staying in the hose, close the water inlet into the dishwasher.
(This does not apply to dishwashers with the aqua-stop function.)
Connecting the drain hose
Insert the drain hose into the waste water pipe with a minimum diameter of 4 cm or leave it
lying in the sink and ensure that it is not bent or dented. Use a special plastic bracket supplied
with the appliance. The hose must be at a height of 50 to 110 cm above the ground. The loose end of the hose
must not be submerged in water so that reverse water  ow does not occur.
NOTE:
The hose must be at a height of 50 to 110 cm above the ground. The loose end must not be submerged
in water.
EN - 9
03/2012Copyright © 2012, Fast ČR, a. s.
Draining water
 Connect the drain hose. The drain hose must be properly attached so that water does not leak. Check that
the hose is not knotted up or pinched.
Extending the hose
 If you need to extend the drain hose, you must use the same type of drain hose.
 The hose must not be longer than 4 meters. Otherwise the e ciency of the dishwasher would be reduced.
Connecting the drain hose
You must connect the drain hose at a height from 50 cm (minimum) to 110 cm (maximum) from the bottom
part of the appliance. Secure the drain hose using a clamp. The loose end must not be submerged in water.
Built-in
This dishwasher is designed to be built-in. Adhere to all warnings and instructions contained in this user‘s
manual during installation.
Before installation check that the required dimensions of the dishwasher to be built-in correspond to the
dimensions of the installation location – see illustration below.
Removing the top cover
First unscrew the bolts fastening the top cover to the dishwasher.
Carefully pull the top cover outwards and lift it up.
EN - 10
03/2012Copyright © 2012, Fast ČR, a. s.
WARNING!
After removing the cover, all rigid parts must remain stable to ensure balance.
After removing the cover it will be necessary to level the dishwasher to ensure correct balance.
After connecting the inlet and drain hoses, slide the dishwasher into the installation area. Take care not to
damage, crimp, bend or otherwise impair any of the hoses.
WARNING!
Only remove the top cover if it is absolutely necessary for the installation into the built-in area.
The dimensions of some built-in areas may be higher and so the dishwasher will  t in with the top
cover attached.
Turning on the dishwasher
Before turning on the dishwasher, check the recommendation below.
 The dishwasher is levelled and properly seated.
 Is the inlet valve opened?
 Joints do not leak in the connection points.
 Cables are properly connected.
 Is the power source turned on?
 The water supply hose and the drain hose are not knotted up.
 You have removed all packaging material and all printed materials.
EN - 11
03/2012Copyright © 2012, Fast ČR, a. s.
PART 4: CONTROL PANEL
Control panel
10. 9. 8.
1. 2. 3. 4. 5. 6. 7.
1. ON/OFF button: Turning on/o power to the appliance. After turning on, the Start/Standby indicator light
will come on.
2. Half dish load button: by using the half dish load function you can reduce the washing cycle time and
reduce water and electricity consumption.
3. Tablet button: use this if you are using 3-in-1 tablets containing washing detergent, salt, rinsing aid.
4. Handle
5. Program button: Press the button to select a desired program.
6. Additional rinse button: activate the additional rinse function for a selected program.
If you select the additional rinse function the additional rinse indicator light will light up in the top left
corner of the display. The additional rinse function will be added to the selected program. This will make
the dishes cleaner and shinier.
7. Start/Pause button: press this button to start the washing cycle selected using the program button. The
washing indicator light will turn on. In the o state the indicator light will  ash.
8. Salt warning indicator light: It will light up if salt needs to be re lled.
Rinsing aid warning indicator light: It will light up if rinsing aid needs to be re lled.
NOTE:
The washing program that was set previously will remain in the dishwasher‘s memory. Before turning on
the dishwasher again, check that you have selected the correct washing program.
9. Washing cycle progress indicator: the individual indicator lights will turn on at the relevant stages of the
washing cycle.
Wash – washing
Dry – drying
End – end
10. Remaining time display: displays the time remaining until the end of the selected washing program.
Furthermore, you can postpone the start of the selected washing cycle by pressing the +/- buttons before
starting the washing cycle. If you wish to change the postponed start time, press the Start/Pause button
and use the +/- buttons to change the time. Then press the Start/Pause button again.
Child lock function
To prevent buttons from being pressed accidentally, it is possible to activate the child lock function. Hold down
the + and – buttons at the same time for 3 seconds. The display will show „CL“ for approximately 2 seconds.
To cancel the child lock function hold down the + and – buttons at the same time for 3 seconds. „CL“ will  ash
once on the display.
EN - 12
03/2012Copyright © 2012, Fast ČR, a. s.
Before rst use
Before you put your dishwasher into operation:
a) set water softening;
b) pour 3/4 litre of water into the salt compartment and  ll it up with salt;
c)  ll the rinsing aid compartment;
d)  ll the dishwashing detergent compartment.
Water softener
The water softener is made so that it releases minerals and salts contained in water, which would have
a negative e ect on the operation of the dishwasher. The higher the content of these minerals and salts, the
harder the water is. You should set the water softener according to the water hardness in your area. Information
about water hardness in your area should be provided by your water supply company.
If you use hard water in your dishwasher, scale deposits will be left on your dishes, which may negatively a ect
the washing e ciency and lifetime of your dishwasher.
The appliance should be equipped with a special softener, which uses the salt compartment for salt speci cally
designed for eliminating scale and minerals from water.
Identifying water hardness
The dish washing e ciency of your dishwasher depends on the hardness of the water used. Therefore, your
dishwasher is equipped with a system which reduces water hardness at the main water inlet. The better the
system is set up the better the achieved washing e ciency. Your water supplier should provide you with
information about water hardness in your area or you may measure it yourself using a simple harness test,
a special testing strip (not included).
Take the
testing
strip out
of the
packaging.
Allow your
tap water
to  ow
over the
strip for
approxi-
mately
1 minute.
Leave the
testing strip
dipped in
the water
for approxi-
mately
1 second.
Take it out of
the water and
tap it.
Wait
approxi-
mately
1 minute
for the
result.
Compare the hardness value on the
strip to the hardness table supplied
with the testing strip.
1
minute
1
second
1
minute
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
No Lime
Very low lime content
Low lime content
Medium lime content
Lime content
High lime content
Setting salt consumption
The dishwasher is designed to enable the adjustment of salt consumption on the basis of the hardness of the
water used. This should optimise and adapt the level of salt consumption.
EN - 13
03/2012Copyright © 2012, Fast ČR, a. s.
Table for setting up water hardness
Water hardness
level
dH
(German unit)
dF
(French unit)
dE
(English unit)
Water hardness setting
indicator
1 0 – 5 0 – 9 0 – 6 L1 will appear on the display
2 6 – 11 10 – 20 7 – 14 L2 will appear on the display
3 12 – 17 21 – 30 15 – 21 L3 will appear on the display
4 18 – 22 31 – 40 22 – 28 L4 will appear on the display
5 23 – 31 41 – 55 29 – 39 L5 will appear on the display
6 32 – 50 56 – 90 40 – 63 L6 will appear on the display
1. Press and hold down the „P“ program button.
2. Meanwhile press the ON/OFF button.
3. Hold down the program button until the „SL“ displayed on the screen disappears. Then release the program
button.
4. The previously set water hardness level will be shown (salt consumption).
5. Use the +/- buttons to set the water hardness level.
6. To con rm and save into the dishwasher‘s memory press the ON / OFF button.
NOTE:
Your water supplier will provide you with information about the hardness of your water.
CAUTION!
If your dishwasher does not have a water softening system, you can skip this chapter.
Adding salt into the salt container
Always use salt designed for dishwashers.
The salt compartment is located under the lower rack and you should re ll it in the following manner.
NOTE
 Use only salt speci cally designed for use in dishwashers! Any other kind of salt, which is not
speci cally designed for use in dishwashers, particularly table salt, would damage the softener
system in the dishwasher. Damage caused by the use of inappropriate salt is not covered by
the manufacturer's guarantee and the manufacturer takes no responsibility for any damages
caused.
 Add the salt before starting one of the full washing cycle programs. This will prevent salt
crystals or salt water from lying at the bottom of the dishwasher, where this could lead to
corrosion.
EN - 14
03/2012Copyright © 2012, Fast ČR, a. s.
a) Slide out the lower rack and then unscrew the lid of the salt compartment – see pic. 1/2.
b) Before the  rst wash, pour 3/4 litre of water into the salt compartment.
c) Place the funnel (included accessory) on the opening of the compartment and pour 1 kg of salt into it.
• It is normal for a smaller amount of water to run out of the compartment.
d) After lling the compartment screw the lid back on by turning it in the clockwise direction.
e) You should start a washing program immediately after the salt compartment has been re lled (we
recommended the rinse or quick wash program). Otherwise the salt water could damage the  ltration
system, pump and other important part of the dishwasher. This is not covered by the warranty.
NOTE
 Only re ll the salt compartment when the salt warning indicator light on the control panel
lights up. Depending on how well the salt dissolves, the warning indicator light may stay on
even after the salt compartment has been re lled.
 If there is no salt warning indicator light on the control panel (on some models), you can
estimate the amount after adding salt to the system by the number of cycles performed by the
dishwasher.
 If salt runs out anywhere, remove it by starting the rinse program or the quick wash program.
EN - 15
03/2012Copyright © 2012, Fast ČR, a. s.
Adding rinsing aid
Rinsing aid compartment
 The rinsing aid is released during the last rinse so that water drops do not remain on your dishes causing
stains. It also improves drying due to the fact that all the water  ows o the dishes. Your dishwasher is
designed to only be used with a liquid rinsing aid. The rinsing aid compartment is located on the inside
wall of the door next to the dishwashing detergent compartment.
 Fill up the compartment by opening it and pouring in the rinsing aid until the indicator goes completely
dark. The capacity of the rinsing aid compartment is approximately 110 ml.
NOTE:
Use only branded dishwasher rinsing aids. Never pour other mixtures (such as liquid detergents, etc.)
into the rinsing aid compartment. Otherwise the dishwasher may be damaged.
When should the rinsing aid be re lled?
If the rinsing aid compartment is empty, the relevant indicator light on the control panel will turn on indicating
the need to add rinsing aid. After  lling the compartment with rinsing aid the entire indicator is dark. As the
rinsing aid is gradually used up the point of the indicator becomes smaller. Never allow the amount of rinsing
aid to fall below 1/4 of the compartment volume.
CAUTION
Wipe any spilled rinsing aid with a wiping cloth, so that excessive suds are not formed in the
following wash. Do not forget to put the lid back on before closing the dishwasher door.
Setting dial (rinse)
The rinsing aid compartment has six di erent settings. Its factory level setting is 3. If stains form on the dishes
or if there is a problem with drying the dishes, increase the released amount of the rinsing aid by removing
the lid and turning the dial to "4". If despite this step the dishes are not without stains after drying, adjust the
setting again to a higher level until the dishes are clean after drying. If rinsing aid residues remain on the
dishes, reduce the level to 1 – 2. The recommended setting is "3". (The value set by the manufacturer is "3".)
NOTE:
If there are water drops or scale stains on the dishes after the wash, increase the dosage. If there are
white stains or blueish layers on glasses or knife blades, lower the dosage.
EN - 16
03/2012Copyright © 2012, Fast ČR, a. s.
Function of the detergent
Dishwashing detergents with their chemical additives are essential for the removal of soils, their decomposition
and removal from the dishwasher. For this purpose the majority of commercial quality dishwashing detergents
are suitable.
Dishwashing detergents
There are 3 types of dishwashing detergents:
1. containing phosphates and chlorine;
2. containing phosphates and without chlorine;
3. without phosphates and without chlorine.
New dishwashing detergents usually do not contain phosphates and so the softening function of the
phosphates is missing. In such a case we recommended the use of a softening salt even when the water
hardness is a mere 6°dH. If you use dishwashing detergents without phosphates and have hard water, this
leads to the frequent appearance of white stains on dishes and glasses. In such a case you will therefore
achieve better results if you add more dishwashing detergent. Chlorine-free dishwashing detergents whiten
only slightly. For this reason strong and colourful stains will not be completely removed. In such a case select
a program with a higher temperature.
Concentrated dishwashing detergents
Based on their chemical composition dishwashing detergents are divided into two basic types:
 standard, alkaline dishwashing detergents with caustic additives;
 less alkaline dishwashing detergents with natural enzymes.
Using "standard" washing programs in combination with concentrated dishwashing detergents reduces
pollution and is appropriate for your dishes. These programs are speci cally improved with enzymes, which are
contained in concentrated dishwashing detergents, that can dissolve soils. For this reason you can achieve
the same results with concentrated dishwashing detergents using a "standard" washing program, as you
would achieve only with the use of an "intensive" program.
Dishwashing tablets
The dissolving speed of various brands of dishwashing tablets may di er. For this reason some tablets may not
dissolve during the short programs and therefore fail to perform their cleaning function. So when using tablets
use the long programs to ensure the removal of all dishwashing detergent remains.
Dishwashing detergent compartment
You must  ll up the compartment before starting any washing cycle according to the instructions contained in
the dishwashing cycle table. Your dishwasher uses less dishwashing detergent and rinsing aid than an ordinary
dishwasher. Generally a single tablespoon of dishwashing detergent is su cient for a standard wash. For
more heavily soiled dishes you will need more dishwashing detergent. Always add the dishwashing detergent
immediately before starting the dishwasher, otherwise it could become damp and subsequently not dissolve
completely.
NOTE
 If the lid is closed, press the button. The lid will open.
 Always add the dishwashing detergent immediately before starting each washing cycle.
 Use only branded dishwashing detergents designed for dishwashers.
EN - 17
03/2012Copyright © 2012, Fast ČR, a. s.
WARNING!
The dishwashing detergent is corrosive! Keep it out of children's reach.
Using the dishwashing detergent
Use only dishwashing detergent speci cally designed for use in dishwashers. Store the dishwashing detergent
in a dark and dry place.
Do not put dishwashing detergent powder into the compartment unless you intend to start the dishwasher.
Dosage of the dishwashing detergent
1. Release the clip to open the dishwashing detergent compartment.
2. Place the required amount of dishwashing detergent into the main wash detergent compartment (if you
are using a dishwashing powder). Make sure that the amount of the dishwashing detergent is between the
MIN and MAX level lines.
3. If the dishes are overly soiled, also add dishwashing detergent into the pre-wash partition.
4. Close the dishwashing detergent compartment.
5. Now turn on the dishwasher.
NOTE:
The mark „MIN” in the main wash detergent compartment corresponds to approximately 20g of
dishwashing detergent. The pre-wash detergent compartment will take approximately 5g of dishwashing
detergent.
Follow the recommended dosages and storage indicated by the manufacturer on the packaging of the
dishwashing detergent.
Close the lid and press it down until it clicks in.
If the dishes are heavily soiled, also add dishwashing detergent into the pre-wash compartment. This dose will
be used during the pre-wash phase of the wash.
NOTE:
You can  nd the information about dishwashing detergent dosages in the washing program table.
Keep in mind that the results may di er depending on the degree of soiling and hardness of the water
used.
Follow the manufacturer's recommendations on the dishwashing detergent package.
EN - 18
03/2012Copyright © 2012, Fast ČR, a. s.
PART 5: WASHING DISHES / CUTLERY
 Purchase dishes designated as dishwasher safe.
 Use a gentle dishwashing detergent marked as "gentle on dishes". If necessary seek out further information
from the dishwashing detergent manufacturer.
 For certain types of dishes select a lower temperature.
 To prevent possible damage, remove glassware and cutlery from the dishwasher as soon as possible after
the end of the wash.
Unsuitable are:
 cutlery with wooden, bone or mother-of-pearl handles;
 plastic parts that are not heat resistant;
 older cutlery with glued parts that are not heat resistant;
 glued cutlery or dishes;
 tin or copper dishes;
 crystal glassware;
 metal parts susceptible to corrosion;
 wooden cutting boards;
 dishes made from synthetic  bres.
Partially suitable are:
 some types of glass may corrode after several washes;
 silver and aluminium cookware may become discoloured by the wash;
 glazed patterns may fade if washed frequently.
NOTE:
Your dishwasher will achieve the best performance if you follow these instructions for inserting dishes
into the racks. The function and appearance of the racks and the cutlery basket may di er depending on
the model of the dishwasher.
NOTE:
Do not place any items into the dishwasher soiled by cigarette ash, wax, varnish or paint.
When buying new dishes, check that they are dishwasher safe.
First remove remaining or burned on foods. It is not necessary to wash dishes under running water.
Insert the dishes into the dishwasher as follows.
 Items such as cups, glasses, pots / pans, etc., should be placed bottom up.
 Curved cookware and cookware with projections should be placed at an angle to allow water to freely
ow out.
 Place dishes safely so that they cannot tip over.
 Place dishes in such a way that the spraying arms can rotate freely during the wash.
NOTE:
Do not wash very small pieces in the dishwasher because they can easily fall out of the rack.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Philco PD 1070 Návod na obsluhu

Kategória
Umývačky riadu
Typ
Návod na obsluhu

V iných jazykoch