Fieldmann FZR 4008-79B Používateľská príručka

FZR 4008-79B

EN 2

FZR 4008-79B

English .................................................................................................................................................................................................. 5 - 20

Čeština................................................................................................................................................................................................21 - 36

Slovenčina ......................................................................................................................................................................................... 37 - 52

Magyarul ............................................................................................................................................................................................ 53 - 68

Polski .................................................................................................................................................................................................69 - 84

Slovenščina................................................................................................................................................................................... 85 - 100

1

2

3

4

5

6

7

8

9

10

11

EN

PETROL LAWNMOWER USER'S MANUAL

3

234

567

8910

11 12

EN 4

FZR 4008-79B

13 14 15

16 17 18

19

EN

PETROL LAWNMOWER USER'S MANUAL

5

Petrol Lawnmower

USER'S MANUAL

Thank you for purchasing this rotary petrol lawnmower. Before you start using it, please,

carefully read this user's manual and save it for possible future use.

CONTENTS

ILLUSTRATED ATTACHMENT .....................................................................................................................................1

1. GENERAL SAFETY INSTRUCTIONS ......................................................................................................................... 6

Important safety notice

Packaging

Operating instructions

2. EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE ..................................................................7

3. DESCRIPTION OF THE MACHINE ...........................................................................................................................9

4. ASSEMBLY INSTRUCTIONS ........................................................................................................................................9

5. OPERATION .....................................................................................................................................................................9

General mowing tips

Recommended maintenance plan

Preparing for maintenance

Replacing the air filter

Changing the motor oil

Replacing the mowing blade

6. SAFETY INSTRUCTIONS ............................................................................................................................................ 14

General safety instructions

Instructions for use

7. MAINTENANCE ........................................................................................................................................................... 15

Lawn care

Maintenance

Service

Warranty does not cover

Storage

8. TECHNICAL SPECIFICATIONS .............................................................................................................................. 17

9. DECLARATION OF CONFORMITY ..................................................................................................................... 18

10. DISPOSAL ....................................................................................................................................................................... 19

Contents

EN 6

FZR 4008-79B

General safety instructions

1. GENERAL SAFETY INSTRUCTIONS

Important safety notice

Carefully unpack the product and take care not to throw away any part of the packaging before you find all

the parts of the product.

Store the machine in a dry place out of reach of children.

Read all warnings and instructions. Not following warnings or instructions may lead to injury by electrical

shock, a fire and/or serious injuries.

Packaging

The product is packed in a package that prevents damage during transport. This package is a resource and so

can be handed over for recycling.

Operating instructions

Before you start working with the machine, read the following safety and usage instructions.

Acquaint yourself with the operating elements and the correct use of the machine. Keep the user's manual in

a safe place where it can be easily retrieved for future use. Save the original packaging, including the internal

packing material, warranty card and proof of purchase receipt at least for the duration of the warranty.

If you need to ship this machine, pack it in the original cardboard box to ensure maximum protection during

shipping or transport (e.g. when moving or when you need to send this product for repair).

Note: If you hand over the machine to somebody else, do so together with the user's manual. Following

the instructions in the included user's manual is a prerequisite for the proper use of the machine. The

user's manual also contains operating, maintenance and repair instructions.

The manufacturer takes no responsibility for accidents or damages resulting from not

following the instructions in this manual.

EN

PETROL LAWNMOWER USER'S MANUAL

7

Explanation of instruction labels on the machine

2. EXPLANATION OF INSTRUCTION LABELS

ON THE MACHINE

Before putting into operation, please carefully

read the user's manual.

Keep other persons away from the work area.

Attention, rotating blades! Protect yourself against

the danger of injury to limbs.

Emission of toxic gasses. Do not use the petrol

lawnmower in enclosed or unventilated areas.

Hot surfaces, risk of burns!

Before carrying out maintenance, turn off the

engine and disconnect the spark plug.

Never add fuel while the engine is running.

EN 8

FZR 4008-79B

Explanation of instruction labels on the machine

Indicates that there is a risk of injury to persons, death or

damage to the machine if instructions are not followed

Use hearing protection.

Use eye protection.

Use breathing organ protection.

Always maintain a distance from moving parts.

Travel along the slope on contours, not up and down.

Conforms to all relevant European directives.

Petrol is extremely ﬂammable and therefore allow the

engine to cool down for 2 minutes before adding more

fuel.

EN

PETROL LAWNMOWER USER'S MANUAL

9

Description of the machine | Assembly instructions | Operation

3. DESCRIPTION OF THE MACHINE

1. Switch / brake lever

2. Travel lever

3. Top part of the handle

4. Quick coupling screw

5. Bottom part of the handle

6. Grass catcher

7. Engine

8. Fuel primer bulb

9. Pull cord

10. Central mowing height adjustment lever

11. Lawnmower chassis

4. ASSEMBLY INSTRUCTIONS

WARNING! There exists a risk of damage to cables and subsequent operation of the lawnmower under

dangerous conditions if the handle is incorrectly folded or unfolded.

Do not damage the cables when folding or unfolding the lawnmower handle.

If a cable is damaged, contact an authorised service centre.

1. Take the top and bottom part of the handle out of the packaging, screw out the quick coupling screws on both

sides of the handle and connect both parts of the handle together (ﬁgure 2).

2. Press the buttons on the handle (ﬁgure 3).

3. Place 4 nuts on the bottom part of the handle (ﬁgure 4).

4. Lift up the back cover of the lawnmower and hold it in the top position (ﬁgure 5).

5. Insert the grass catcher into the groove in the rear part of the cover (ﬁgure 6).

6. Release the rear cover.

5. OPERATION

1. Adding motor oil

1.1 Take out the oil dipstick (ﬁgure 7).

1.2 Slowly pour oil into the ﬁlling tube until the oil level reaches the "Full" (full) mark on the oil dipstick. Do not

overﬁll the tank.

1.3 Then screw the oil dipstick back into place.

Caution! Perform the ﬁrst oil change after the ﬁrst 2 hours of operation, then regularly change the oil once

a year. See chapter Changing the motor oil.

EN 10

FZR 4008-79B

Operation

2. Filling up fuel

Caution! Petrol is an extremely ﬂammable and combustible substance. In the event of a ﬁre or explosion,

you and other persons may suffer burns.

Prior to pouring in petrol, place the canister and/or the lawnmower directly on the ground, do not place it in

a vehicle or on an object, this will prevent the risk of a static discharge and the combustion of the petrol while

it is being poured.

Always add the fuel in an outdoor environment, when the engine is cold. Carefully wipe away any stains or

drops.

Do not smoke when adding petrol. Do not pour fuel into the lawnmower in the vicinity of an open ﬁre or

sparks.

Only store petrol in an approved type of canister, out of reach of children.

3. Checking the oil level

3.1 Take out the oil dipstick, clean it using a cloth and reinsert it into the hole (ﬁgure 7).

3.2 Then take the dipstick out again and read off the oil level. If the oil level is below the "Add" (add) mark,

slowly pour oil into the ﬁlling tube until the oil level reaches the "Full" (full) mark on the oil dipstick. Do not

overﬁll the tank.

3.3 Put the oil dipstick back into place.

4. Setting the mowing height

Caution! When setting the mowing height, there is a risk of contact with the moving blades and

subsequent serious injury.

Turn off the engine and wait until the moving parts come to a complete stop.

When setting the mowing height, never place your ﬁngers into the area under the lawnmower deck.

Caution! If the engine was running, the exhaust mufﬂer is very hot and there is risk of burning oneself on

it. Keep a safe distance from the hot exhaust mufﬂer.

4.1 Set the mowing height as required using the central height adjustment lever (ﬁgure 8).

5. Starting the engine

5.1 Before ﬁrst use of the lawnmower, press 3. - 5 times the fuel primer bulb on the suction ﬁlter. Then before

every start of the lawnmower, press the fuel primer bulb only once (ﬁgure 9).

5.2 Pull the throttle control lever to the handle (ﬁgure 10).

5.3 Start the lawnmower using the manual starter (ﬁgure 11).

5.4 If the engine does not start up after 1 - 2 pulls of the cord, press the fuel primer bulb once or twice and

attempt to start it again.

Note: If you are unsuccessful starting the engine, contact an authorised service centre.

Turn off the engine. Release the brake control lever.

EN

PETROL LAWNMOWER USER'S MANUAL

11

Operation

6. Mowing with travel (applies only to lawnmowers equipped with travel)

If you wish to take advantage of the independent travel feature when mowing, press the travel control lever 1

(bottom lever) against the handle and hold it (ﬁgure 12).

If you do not wish to use the travel feature, simply release the travel control lever.

Note: The travel runs at a constant maximum speed when mowing.

Remove sticks, branches, rocks, wires and other items from the area being mowed, which the mowing blades

could impact.

Prevent the mowing blades from coming into contact with solid foreign objects. Never intentionally travel over

items with the lawnmower.

If the lawnmower has travelled over an object or it has started vibrating abnormally, immediately turn off the

engine, disconnect the spark plug cable and check the lawnmower for damage.

You will achieve the best lawnmower performance by always replacing or sharpening and balancing the

mowing blade at the start of the season.

7. Stopping the engine

If you wish to stop the engine, release the cutting blade control lever (ﬁgure 13).

8. Tips for operating the petrol lawnmower

General mowing tips

Never mow more than one third of the length of the blade of grass at once. Do not mow grass to a height of

less than 4 cm

If you intend to mow grass higher than 1 cm, ﬁrst set a higher mowing height and proceed very slowly when

mowing. Then reduce the mowing height and mow the entire area once more. If the grass is too tall, the

lawnmower may clog up and the engine may be overloaded.

WARNING! When mowing wet grass or wet leaves there is a risk of slipping, falling down and subsequent

serious injury resulting from contact with the mowing blades of the lawnmower. Mow grass only when it is

dry.

If the mowing results look unsatisfactory, try the following steps:

- Replace the mowing blade or have it sharpened.

- Walk slower when mowing.

- Increase the mowing height on the lawnmower.

- Mow the lawn more often.

Caution! The right and left side of the lawnmower are described from the viewing position of the operator

of the lawnmower when mowing.

EN 12

FZR 4008-79B

Operation

Recommended maintenance plan

Maintenance interval Task

After ﬁrst 2 hours of operation Change the motor oil.

Before each use or daily

Check the oil level in the tank.

Check that the engine turns off 3 seconds after the mowing blade

control lever is released.

Clean grass clippings and other dirt from the bottom part of the

lawnmower.

Before storage Before repairs or storage for the winter season, drain the petrol from the

tank (see the respective chapter in the manual).

Yearly

Replace the air ﬁlter (in dusty conditions, replace the ﬁlter more

frequently).

Change the motor oil.

Lubricate the wheel mechanism.

Replace the mowing blade or have it sharpened (if the blade is blunted

faster, have it sharpened more frequently).

You can ﬁnd further information in the user's manual of the

lawnmower's engine.

Important: You can ﬁnd further information in the user's manual of the lawnmower's engine.

Preparing for maintenance

1. Turn off the engine and wait until the moving parts come to a complete stop.

2. Before starting maintenance, disconnect the end of the spark plug and hook it on to the holding pin (ﬁgure

14).

3. After ﬁnishing maintenance, reconnect the end to the spark plug.

Important: In order to tilt the lawnmower to change oil or replace the blades, ﬁrst use up all the fuel in the

tank. If it is necessary to tilt the lawnmower before fuel is used up, pump out the fuel using a manual fuel

pump. Always tilt the lawnmower to the side so that the air ﬁlter is pointing upwards.

Caution! Fuel may leak out when the lawnmower is tilted. Fuel is ﬂammable and combustible and may

cause injury. Use up the fuel during operation or pump it out using a manual pump, never using a siphon

tube.

Replacing the air ﬁlter

Replace the air ﬁlter once per year. If you operate the lawnmower in dusty conditions, replace the ﬁlter more

frequently.

1. See chapter Preparing for maintenance.

2. Take off the air ﬁlter cover.

3. Replace the air ﬁlter.

4. Reattach the lawnmower cover.

EN

PETROL LAWNMOWER USER'S MANUAL

13

Operation

Changing the motor oil

Before changing the oil, allow the engine to run for a while to heat up the oil. Warm oil is easier to drain and also

binds more impurities to itself.

1. See chapter Preparing for maintenance.

2. Take out the oil dipstick (ﬁgure 16).

3. Tilt the lawnmower to the right side and drain the used oil through the ﬁlling tube (ﬁgure 17).

4. Slowly pour oil into the ﬁlling tube until the oil level reaches the "Full" (full) mark on the oil dipstick (ﬁgure 18).

Do not overﬁll the tank.

5. Put the oil dipstick back into place.

6. Take the used oil to your local waste collection facility.

Replacing the mowing blade

Important: You will need a torque wrench to correctly install the mowing blade. If you do not have

a torque wrench or you are not sure about the installation, please contact an authorised service centre.

After using up a tank of fuel, always check the mowing blade. If the mowing blade is damaged or cracked,

replace it immediately. If the blade is blunt or damaged, have it sharpened or replace it.

Caution! The mowing blade is sharp, contact with the blade may result is serious injury. Use protective

gloves when working with the mowing blade.

1. Before starting maintenance, disconnect the end of the spark plug and hook it on to the holding pin. See

chapter Preparing for maintenance.

2. Tilt the lawnmower to the side so that the air ﬁlter is pointing upwards.

3. Lock the mowing blade in position using a wooden block (ﬁgure 19).

4. Take off the mowing blade and keep all the fastening parts (ﬁgure 19).

5. Install a new mowing blade and all the fastening parts.

Important: The bent ends of the mowing blade must point towards the lawnmower deck.

6. Using the torque wrench, tighten the mowing blade fasting bolt to 4 Nm.

Important: A bolt tightened to 4 Nm is very strong. Lock the mowing blade in position using a wooden

block and ﬁrmly tighten the bolt using a impact or torque wrench. It is very difﬁcult to overtighten the bolt.

EN 14

FZR 4008-79B

Safety Instructions

6. SAFETY INSTRUCTIONS

General safety instructions

This product is used exclusively for mowing grass. Do not use it for any other purposes than those intended.

Otherwise there is a risk of damaging it or an injury.

Never allow children or persons who are not acquainted with the contents of this user's manual to work with

the machine.

The person operating the lawnmower is responsible for the safety of persons in the work area.

Never operate the lawnmower in the near vicinity of other people, children or freely roaming animals.

Before starting mowing, check the terrain where the lawnmower will be used and remove stones, wires,

sticks, splinters, bones and other foreign objects, which could become caught in it or deﬂected or cause

injuries.

Instructions for use

All nuts, pins and bolts must be properly tightened so that the machine is in a safe and operational condition.

Never use the lawnmower without the grass catcher or protective cover.

Never use the lawnmower with loose mowing blades. Always check in advance that all respective bolts are

securely tightened. Blunt blades must be sharpened evenly.

Damaged blades must be replaced.

When working with the lawnmower, wear long pants and solid footwear.

Never start the lawnmower in enclosed or poorly ventilated areas where fumes could accumulate. Emissions

from the engine contain carbon monoxide, which is life threatening.

Work only during sufﬁcient light conditions (in daylight or sufﬁcient artiﬁcial lighting).

Do not use the lawnmower when it is raining or if the grass is wet.

Proceed especially carefully when mowing in elevated terrain (on a slope). Always mow perpendicular to the

slope, parallel to the contour, and not directly up/down.

Under no condition leave the lawnmower running without supervision; if you leave the lawnmower, turn off

the engine.

Never lift the rear part of the lawnmower when starting it and always keep your limbs away from the cutting

deck or the rear grass ejection chute while the engine is running.

Never modify the engine's speed setting.

On lawnmowers with travel, release the travel lever before starting the engine.

Never transport the lawnmower while its engine is running.

Stop the engine and disconnect the spark plug in the following cases:

- when performing any task whatsoever under the mowing deck or in the rear grass ejection chute.

- when performing maintenance, repairs or inspecting the machine.

- before carrying, lifting or transporting the lawnmower.

- when you leave the lawnmower without supervision or you are getting ready to adjust the mowing height.

- before removing and emptying the grass catcher.

- when an impact with a foreign object occurs, stop the engine and carefully inspect to ensure that there is

no damage. In the event of damage, take the lawnmower to a specialised service centre for repairs.

ATTENTION: The mowing blade continues to rotate for several seconds after the engine is turned off.

EN

PETROL LAWNMOWER USER'S MANUAL

15

Safety instructions | Maintenance

- if the lawnmower is vibrating abnormally (immediately identify and remedy the cause of the vibration).

- For the purpose of ensuring safe operation, regularly check that the pins, bolts and nuts on the

lawnmower are securely tightened.

ATTENTION: FUEL IS A VERY FLAMMABLE LIQUID.

Store fuel in a suitable container.

Only add fuel in an open and well ventilated location. When handling fuel, do not smoke or use a mobile

phone.

Only add fuel when the engine is turned off. Never open the fuel tank or add fuel if the engine is hot or if it is

running.

If fuel is spilled, do not start the engine. Take the lawnmower away from the location where the fuel was

spilled and take care to avoid possible ignition. Continue with work only after the spilled fuel has evaporated

and the fuel fumes have dissipated;

After adding fuel, securely tighten the fuel tank cap and the cap on the fuel canister.

ATTENTION: Before carrying out maintenance or repairs, stop the engine and disconnect the spark plug.

7. MAINTENANCE

Lawn care

Various forms of care are required depending on the type of grass area.

Therefore, always read the instructions included on seed packages with respect to the mowing height for the

growing conditions in the given locality.

It is necessary to always keep in mind that the larger part of grass consists of a stem and one or more leaves.

When the leaves are cut off completely, the lawn is damaged and the renewal of growth will be much more

difﬁcult.

The following instructions generally apply:

– excessively low mowing causes disruption to the roots and subsequently "spotty" appearance;

– in summer, mowing must be higher to prevent the soil from drying out;

– mowing wet grass may result in a lower efﬁciency of the blade due to grass catching on the blade and

grass being ripped out of the ground;

– in the event of exceptionally tall grass it is appropriate to perform the ﬁrst mow at the maximum permitted

mowing height of the machine and then mow again only after two or three days.

The lawn will have a better appearance when it is mowed regularly over its entire area at the same height with

alternating mowing directions.

Maintenance

All nuts, pins and bolts must be properly tightened so that the machine is in a safe and operational

condition. Regular maintenance is the basic prerequisite for ensuring safety of the user, maintain the

lawnmower's operating condition and high performance.

Never store a machine with petrol in the fuel tank inside a building where the fumes could come within range

of an open ﬁre, sparks or sources of high temperature

Before storing in any enclosed area, allow the engine to cool down.

EN 16

FZR 4008-79B

Maintenance

To reduce the risk of a ﬁre, ensure that the lawnmower and in particular the engine, exhaust mufﬂer, battery

and also the location of spare fuel storage are free of grass, leaves or excessive amounts of lubricant.

Regularly inspect the condition of the deﬂector and the grass catcher; replace if damaged.

Drain the fuel in a well ventilated area when the engine has cooled down.

When removing or installing the mowing blade, use thick work gloves.

It is necessary to check the balance of the mowing blade every time that it is sharpened.

ATTENTION: Before carrying out maintenance or repairs, stop the engine and disconnect the spark plug.

Before using the four-stroke engine, please carefully read the user's manual of the engine. Regularly check the

oil level and if necessary add oil or change it.

Regularly inspect the lawnmower and ensure that all grass deposits are removed from the underside of the

chassis.

Regularly lubricate the axle of the chassis and the bearings using a suitable lubricant.

Regularly inspect the condition of the blades because they have a signiﬁcant effect on the performance of the

lawnmower. Blades should always be sharp and balanced.

In regular intervals, check that all nuts and bolts are tightened. Nuts and bolts that are worn out or incorrectly

tightened may cause serious damage to the engine or the frame.

If the blade strongly impacts an obstacle, stop the lawnmower and take it to an authorised service centre.

BLADE: the blade is made from pressed steel. To achieve the best possible mowing results, regularly sharpen

the blades, approximately after every 25 hours of operation. Check that the blade is always correctly

balanced. To do this, insert a steel axle (with a diameter of 2-3 mm) into the middle hole. If it is correctly

levelled, the axis will remain in the horizontal position.

If the blade does not remain in the horizontal position, replace it.

When removing the blade, screw out the bolt, check the load bearing part of the blade. If the parts are worn

out or damaged, replace them.

When installing the blades, check that the cutting edges are pointing in the rotating direction of the engine.

The blade fastening bolt must be tightened using a torque wrench to a torque of 3.7 K gm (37 Nm). (ﬁg. 14)

ATTENTION: Always use only original spare parts. Poor quality spare parts may cause serious damage to

the lawnmower and create a safety hazard.

Service

In the event that after purchasing the product you ﬁnd any kind of defect, contact the service department.

When using the product, follow the instructions contained in the included user's manual.

A complaint will not be accepted if you modiﬁed the product or if you did not follow the instructions in the

user's manual.

Warranty does not cover

Normal wear and tear of operating parts of the machine as a result of its use

Servicing tasks related to standard maintenance of the machine (e.g. cleaning, lubrication, tuning, etc.).

Defects caused by external effects (e.g. climatic conditions, dustiness, inappropriate use, etc.)

Mechanical damage resulting from the machine being dropped, impact, etc.

Damages resulting from unprofessional handling, overloading, use of incorrect parts, inappropriate tools, etc.

On returned products that were not properly protected against mechanical damage during transport, the risk

of potential damage is borne exclusively by the owner.

EN

PETROL LAWNMOWER USER'S MANUAL

17

Maintenance | Technical speciﬁcations

Storage

If you will not be using the machine for an extended period of time, store it according to the following

instructions. This will extend the lifetime of the machine.

Fully drain fuel from the fuel tank and the carburettor. Close the choke and 3 to 5 times pull on the cord.

Screw out the spark plug and pour a small amount of motor oil into the socket. Gently pull the pull cord 2 to 3

times.

Use a clean cloth to clean the exterior surfaces. Store the machine in a clean dry location.

8. TECHNICAL SPECIFICATIONS

Engine FWT1P52FA

Engine type OHV, air cooled, 4-stroke

Rated power 1.3 kW

Engine rpm 3000 rpm

Displacement 79.8 cm3

Starting Pull cord

Fuel tank capacity (lead-free 95 or higher) 1.0 litres

Recommended engine oil 15W40, SAE30

Adjustable mowing height 25-75 mm with 10 positions

Height adjustment Central height adjustment

Mowing width 400 mm

Wheel size 155 mm (front wheel)

200 mm (rear wheel)

Capacity of grass catcher: 45 l

Chassis steel

Declared noise level 96 dB (A)

Weight 23 kg

Amendments to text and technical parameters are reserved.

Changes in the text, design and technical specifications may be made without prior notice and we reserve the

right to make these changes.

EN 18

FZR 4008-79B

Declaration of Conformity

9. DECLARATION OF CONFORMITY

ES Declaration of Conformity

We Fast ČR, a.s., Černokostelecká 251 01 Říčany u Prahy, tel.:323204111, hereby declare,

that the Fieldmann FZR 4008-79B Petrol Lawnmower (year of manufacture is indicated on the rating label and is

followed by the serial number of the machine, meets the directives COUNCIL DIRECTIVE:

2006/42/EC – 2004/108/EC – 2000/14/EC – 97/68/EC – 2002/88/EC

and was tested in compliance with the norms below:

EN 55012

EN 836 – EN 836/A1 – EN 836/A2 – EN 836/A3

EN ISO 5395–1:2013

EN ISO 14982:2009

EN ISO 3744:2010

ISO 11094:1991

FAST ČR, a.s. is authorised to act on behalf of the manufacturer.

CE label: 14

In Říčany, on 27. 8. 2014

Petr Uher

Quality Manager

EN

PETROL LAWNMOWER USER'S MANUAL

19

Disposal

10. DISPOSAL

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING

MATERIALS

Take the packaging material to a designated municipal waste facility.

The machine and its accessories are manufactured from various materials, e.g. metal and

plastic.

Take damaged parts to a recycling centre. Inquire at the relevant government department.

This product meets all the basic requirements of EU directives that apply to it.

Changes in the text, design and technical speciﬁcations may be made without prior notice and we reserve

the right to make such changes.

User s manual in the original language.

EN 20

FZR 4008-79B

Notes

Stránka sa načítava ...

Fieldmann FZR 4008-79B Používateľská príručka

Fieldmann FZR 4008-79B Používateľská príručka

V iných jazykoch