Dell Latitude XT2 Stručná príručka spustenia

Dell™ Latitude™ XT2 Media Base

fc.fm Page 1 Wednesday, December 3, 2008 11:40 AM

book.book Page 2 Tuesday, December 2, 2008 1:03 PM

Dell™ Latitude™ XT2 Media Base

Model PR12S

book.book Page 1 Tuesday, December 2, 2008 1:03 PM

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your

computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.; Microsoft and

Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

Model PR12S

November 2008 P/N H276N Rev. A00

book.book Page 2 Tuesday, December 2, 2008 1:03 PM

Media Base 3

Media Base

Back and Left View Features

1 Tablet-PC release lever 2 AC adapter connector

3 audio connector 4 IEEE 1394

5 VGA video connector 6 digital video interface (DVI) connector

7 serial connector 8 USB connector

9 powered USB connector 10 network connector

11 USB connector 12 optical drive in media bay

1

2

3

4

5

6

9

7

10

8

11

12

book.book Page 3 Tuesday, December 2, 2008 1:03 PM

4 Media Base

Top and Right View Features

Before Docking or Undocking Your Tablet-PC to

the Media Base

WARNING: If you are using a multiple-outlet power strip, use caution when you

plug the AC adapter power cable into the power strip. Some power strips may

allow you to insert the connector incorrectly. Incorrect insertion of the power

connector could result in permanent damage to your media base as well as

electric shock and/or fire. Ensure that you insert the ground prong of the power

plug into the mating ground contact of the power strip.

CAUTION: Always use the Dell AC adapter that came with the media base. If you

use any other commercially available AC adapter—or the AC adapter from earlier

models of Dell computers—you may damage the media base or the Tablet-PC.

1 docking connector 2 security cable slot

3 Tablet-PC release lever 4 USB connector

4

3

2

1

book.book Page 4 Tuesday, December 2, 2008 1:03 PM

Media Base 5

CAUTION: When you disconnect the Dell AC adapter cable from the Tablet-PC or

media base, hold the connector, not the cable itself, and pull firmly but gently to

avoid damaging the cable. When you wrap the AC adapter cable, ensure that you

follow the angle of the connector on the AC adapter to avoid damaging the cable.

CAUTION: Use the Latitude™ XT2 media base with your Latitude XT2 only. If you

use a media base from earlier models of Dell computers you may damage the

media base or the Tablet-PC.

Before Docking Your Tablet-PC

1

Save and close any open files, and exit any open programs.

2

Connect the AC adapter to the AC adapter connector on the media base

and to an electrical outlet.

3

Before you dock your Tablet-PC to the media base for the

first time

,

the Tablet-PC operating system must have completed its setup process:

a

Ensure that the Tablet-PC is

not

connected (docked) to the media

base or to the battery slice.

b

Turn on the Tablet-PC.

c

Verify that the Microsoft

®

Windows

®

desktop appears.

d

Shut down the Tablet-PC

.

book.book Page 5 Tuesday, December 2, 2008 1:03 PM

6 Media Base

Before Undocking Your Tablet-PC

1

Save and close any open files, and exit any open programs.

2

Set your Tablet-PC power management settings to ensure that the

Tablet-PC does not enter sleep, standby, or hibernate mode when you

close (lower) the display:

a

Click the Windows

Power

icon

in the Notification area to display

the

Power

icon pop-up window.

b

Click

More power options

.

c

Under the

When I close the lid

drop-down menu, select

Do nothing.

Securing the Media Base

NOTE: If the Tablet-PC is docked to the media base and the media base is secured,

you cannot undock the Tablet-PC without first removing the antitheft device.

Attach a commercially available antitheft device to the security cable slot on

the media base.

Antitheft devices usually include a segment of metal-stranded cable with an

attached locking device and associated key. For instructions on installing this

kind of antitheft device, see the documentation that accompanied the device.

Docking Your Tablet-PC to the Media Base

CAUTION: If you are docking your Tablet-PC for the first time, complete the steps

in "Before Docking or Undocking Your Tablet-PC to the Media Base" on page 4,

before your proceed.

NOTE: After docking the Tablet-PC for the first time, the Tablet-PC battery or the

Tablet-PC AC adapter connection can power the media base if the media base is

not connected to an AC adapter.

1

Follow the procedures in "Before Docking or Undocking Your Tablet-PC to

the Media Base" on page 4.

2

If this is the first time it is being docked to the media base, ensure that

your Tablet-PC is turned off .

3

Align the back of the Tablet-PC with the back of the media base, and lower

the Tablet-PC onto the media base.

book.book Page 6 Tuesday, December 2, 2008 1:03 PM

Media Base 7

4

Press the Tablet-PC onto the media base until it clicks and the Tablet-PC

is firmly seated.

5

Turn on the Tablet-PC.

The operating system recognizes the media base.

1 Tablet-PC 2 media base

1

2

book.book Page 7 Tuesday, December 2, 2008 1:03 PM

8 Media Base

Undocking Your Tablet-PC From the Media Base

CAUTION: Never undock the Tablet-PC without first preparing the Tablet-PC for

undocking. If you undock before preparing the Tablet-PC, you will lose data and

the Tablet-PC may not recover normal operation for several minutes, if at all.

CAUTION: If the Tablet-PC does not have a charged battery in the battery bay, you

must shut down the Tablet-PC through the Windows Start menu and then undock

the Tablet-PC. If you undock the Tablet-PC without a battery before shutting it

down, you will lose data and the Tablet-PC may not recover normal operation for

several minutes, if at all.

1

Follow the procedures in "Before Docking or Undocking Your Tablet-PC to

the Media Base" on page 4.

2

If your media base is secured using an anti-theft device, unlock it.

3

Disconnect the AC adapter connector from the media base.

4

Pull the Tablet-PC release lever forward to release the Tablet-PC from the

media base.

5

Lift the back of the Tablet-PC up and slide the Tablet-PC out towards the

back of the media base.

1 Tablet-PC 2

release lever

3 media base

1

2

3

book.book Page 8 Tuesday, December 2, 2008 1:03 PM

Media Base 9

Removing and Installing the Optical Drive From

the Media Base

1

Undock the media base (see "Undocking Your Tablet-PC From the Media

Base" on page 8).

2

Save and close any open files or programs, and turn off the Tablet-PC.

3

To remove the optical drive:

a

Remove the screw that secures the optical drive to the media base.

b

Use your screwdriver to slide the drive out of the media bay.

4

To install the optical drive:

a

Insert the optical drive into the media bay on the media base.

b

Insert the securing screw that holds the optical drive in place.

5

Turn on the Tablet-PC.

The operating system automatically recognizes the new drive.

1 screw 2 media base

3 optical drive 4 screw hole

2

3

1

4

book.book Page 9 Tuesday, December 2, 2008 1:03 PM

10 Media Base

Media Base Specifications

Physical

Height 12.8 mm (0.50 inches)

Width 295.31 mm (11.63 inches)

Depth 222.56 mm (8.76 inches)

Weight (without optical drive) 0.488 kg (1.076 lb)

Storage

Optical Drive (optional) DVD-ROM/DVD+RW

Ports and Connectors

Network RJ-45 port for 10/100/1000 Mbits/second

Ethernet

USB three 4-pin USB-2.0 compliant connectors

Powered USB one 9-pin USB-2.0 compliant connector

Video

VGA connector

15-pin VGA connector

DVI connector

24-hole connector

Serial 9-pin connector; 16550C-compatible UART

with 16-byte buffer

Audio headphone/speaker (line-out) mini connector

IEEE 1394a 4-pin serial connector

Docking 100-pin connector

book.book Page 10 Tuesday, December 2, 2008 1:03 PM

Dell™ Latitude™ XT2 Medijska

podloga

Model PR12S

book.book Page 11 Tuesday, December 2, 2008 4:01 PM

Napomene, upozorenja i znakovi opreza

NAPOMENA: NAPOMENA ukazuje na važne informacije koje vam pomažu

da koristite svoje računalo na bolji način.

OPREZ: OBAVIJEST označava moguće oštećenje hardvera ili gubitak

podataka i otkriva kako izbjeći neki problem.

UPOZORENJE: OPREZ ukazuje na moguće oštećenje imovine, tjelesne

povrede ili smrt.

____________________

Informacije navedene u ovom dokumentu podložne su promjeni bez prethodne najave.

Bilo kakvo umnožavanje ovog materijala bez pismenog dopuštenja tvrtke Dell Inc. strogo je zabranjeno.

Zaštitni znakovi korišteni u ovom tekstu: Dell, logotip DELL i Latitude su zaštitni znakovi tvrtke Dell Inc.;

Microsoft i Windows su registrirani zaštitni znakovi korporacije Microsoft u Sjedinjenim Državama i/ili

drugim zemljama.

Ostali zaštitni znakovi i zaštićeni nazivi koji se koriste u ovom dokumentu označavaju društva koji su

vlasnici tih znakova ili njihove proizvode. Tvrtka Dell Inc. odriče se bilo kakvih vlasničkih interesa za

navedene zaštitne znakove i zaštićene nazive, osim vlastitih.

Model PR12S

Studeni 2008. P/N H276N Rev. A00

book.book Page 12 Tuesday, December 2, 2008 4:01 PM

medijska podloga 13

medijska podloga

Značajke dostupne sa stražnje i lijeve

strane

1 Ručica kojom se oslobađa

Tablet PC

2 Priključak za AC adapter

3 audio priključak 4 IEEE 1394

5 VGA video priključak 6 priključak za digitalno videosučelje

(DVI)

7 serijski priključak 8 USB priključak

9 USB priključak pod naponom 10 mrežni priključak

11 USB priključak 12 optički pogon u udubljenju za medij

1

2

3

4

5

6

9

7

10

8

11

12

book.book Page 13 Tuesday, December 2, 2008 4:01 PM

14 medijska podloga

Značajke dostupne s gornje i desne

strane

Prije nego što spojite ili odvojite Tablet PC

na Medijskoj podlozi

UPOZORENJE: Ako koristite provodnik kabela napajanja s više

izlaza, budite oprezni prilikom priključivanja kabela AC adaptera u

provodnik kabela napajanja. Kod nekih provodnika kabela napajanja

priključak se može umetnuti neispravno. Neispravno umetanje

priključka napajanja može uzrokovati trajno oštećenje medijske

podloge, kao i električni udar i/ili požar. Zubac uzemljenja priključka

napajanja svakako umetnite u odgovarajući utor za uzemljenje na

provodniku kabela napajanja.

1 priključak za spajanje 2 utor za sigurnosni kabel

3 Ručica kojom se oslobađa Tablet

PC

4 USB priključak

4

3

2

1

book.book Page 14 Tuesday, December 2, 2008 4:01 PM

medijska podloga 15

OPREZ: Uvijek koristite Dell AC adapter koji ste dobili uz medijsku

podlogu. Ako koristite druge AC adaptere ili adaptere ranijih modela

Dellovih računala, možete oštetiti medijsku podlogu ili Tablet PC.

OPREZ: Prilikom odspajanja Dell AC adaptera od Tablet PC-a ili

medijske podloge, držite utikač (ne kabel) i izvucite ga čvrsto, ali

oprezno kako biste izbjegli oštećenje kabela. Kod namatanja kabela

AC adaptera slijedite utikač adaptera kako ne biste oštetili kabel.

OPREZ: Medijsku podlogu Latitude™ XT2 koristite samo uz Latitude

XT2. Ako koristite medijsku podlogu starijih modela Dell računala,

možete oštetiti medijsku podlogu ili Tablet PC.

Prije spajanja Tablet PC-a

1 Spremite i zatvorite sve otvorene datoteke i izađite iz svih otvorenih

programa.

2 Priključite adapter izmjenične struje na priključak na medijskoj podlozi i u

električnu utičnicu.

3 Prije prvog spajanja Tablet PC-a na medijsku podlogu, operacijski

sustav Tablet PC-a mora dovršiti postupak postavljanja:

a Provjerite nije li Tablet PC povezan (spojen) s medijskom podlogom

ili baterijom.

b Uključite Tablet PC.

c Provjerite prikazuje li se radna površina Microsoft

®

Windows

®

.

d Isključite Tablet PC.

book.book Page 15 Tuesday, December 2, 2008 4:01 PM

16 medijska podloga

Prije odspajanja Tablet PC-a

1 Spremite i zatvorite sve otvorene datoteke i izađite iz svih otvorenih

programa.

2 Odredite postavke upravljanja napajanjem Tablet PC-a tako da Tablet PC

ne uđe u stanje mirovanja ili hibernacije kada zatvorite (spustite) zaslon:

a Kliknite Windows ikonu Napajanje u području obavijesti kako

biste prikazali skočni prozor ikone Napajanje.

b Kliknite Dodatne mogućnosti napajanja.

c Na padajućem izborniku Kad spustim poklopac odaberite Ništa.

Učvršćivanje medijske podloge

NAPOMENA: Ako je Tablet PC spojen na medijsku podlogu, a medijska

podloga je učvršćena, Tablet PC ne možete odvojiti bez prethodnog

uklanjanja uređaja protiv krađe.

Spojite neki od dostupnih uređaja protiv krađe na utor sigurnosnog kabela na

medijskoj podlozi.

Protuprovalni uređaji obično sadrže komad metaliziranog kabela s lokotom i

ključem. Za upute o postavljanju takvog uređaja protiv krađe pogledajte

dokumentaciju koju ste dobili s uređajem.

Priključivanje Tablet PC-a na medijsku

podlogu

OPREZ: Ako prvi put priključujete Tablet PC, prije nego što nastavite

obavite postupke opisane u odjeljku "Prije nego što spojite ili odvojite

Tablet PC na Medijskoj podlozi" na stranici 14.

NAPOMENA: Ako medijska podloga nije priključena na AC adapter,

nakon prvog priključivanja Tablet PC-a medijsku podlogu može napajati

baterija Tablet PC-a ili AC adapter Tablet PC-a.

1 Slijedite upute navedene u odjeljku "Prije nego što spojite ili odvojite

Tablet PC na Medijskoj podlozi" na stranici 14.

2 Ako je ovo prvo priključivanje na medijsku podlogu, provjerite je li Tablet

PC isključen .

book.book Page 16 Tuesday, December 2, 2008 4:01 PM

medijska podloga 17

3 Poravnajte stražnju stranu Tablet PC-a sa stražnjom stranom medijske

podloge i spustite Tablet PC na medijsku podlogu.

4 Pritisnite Tablet PC na medijsku podlogu dok ne začujete "klik" i dok

Tablet PC ne bude dobro učvršćen.

5 Uključite Tablet PC.

Operacijski sustav prepoznaje medijsku podlogu.

1 Tablet PC 2 medijska podloga

1

2

book.book Page 17 Tuesday, December 2, 2008 4:01 PM

18 medijska podloga

Odvajanje Tablet PC-a od medijske

podloge

OPREZ: Prije odvajanja Tablet PC-a, uvijek ga prethodno pripremite.

Ako odvajanje obavite bez pripreme, izgubit ćete podatke, a Tablet PC

možda neće nekoliko minuta ili uopće nastaviti s radom.

OPREZ: Ako Tablet PC nema napunjenu bateriju u utoru bateriju,

Tablet PC morate isključiti putem Windows izbornika Start, a zatim ga

odvojiti od podloge. Ako Tablet PC odvojite bez baterije prije

isključivanja, izgubit ćete podatke, a Tablet PC možda neće nekoliko

minuta ili uopće nastaviti s radom.

1 Slijedite upute navedene u odjeljku "Prije nego što spojite ili odvojite

Tablet PC na Medijskoj podlozi" na stranici 14.

2 Ako je medijska podloga osigurana uređajem protiv krađe, otključajte ga.

3 Odspojite AC adapter od medijske podloge.

4 Povucite ručicu za oslobađanje Tablet PC-a kako biste odvojili Tablet PC

od medijske podloge.

1 Tablet PC 2 poluga za otpuštanje

3 medijska podloga

1

2

3

book.book Page 18 Tuesday, December 2, 2008 4:01 PM

Stránka sa načítava ...

Dell Latitude XT2 Stručná príručka spustenia

Dell Latitude XT2 Stručná príručka spustenia

V iných jazykoch

Súvisiace články