Thrustmaster 2960853 Používateľská príručka

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ČESTINA

TÜRKÇE

POLSKI

SVENSKA

SUOMI

SLOVENCINA

MAGYAR NYELV

תירבע

ﺔﻴﺑﺮﻌﻟا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

简体中文

繁體中文

ENGLISH

1/14

User manual

TECHNICAL FEATURES

5

6

1

2

3

4

7

8

9

2/14

9

8

1. Speed brake (air brake) axis

2. 4 detents on the axis + 5 virtual

buttons

3. 6 action buttons

4. Flaps axis

5. 4 detents on the axis

6. 4 action buttons

7. Friction adjustment screw on each

module

8. Mechanism to disable/enable the

detents on each axis

9. SATA connectors for TCA Quadrant

Airbus Edition (sold separately)

3/14

CONNECTING THE TCA QUADRANT ADD-ON AIRBUS

EDITION MODULES TO THE TCA QUADRANT AIRBUS

EDITION*

*Sold separately

In order to use the TCA Quadrant Add-On Airbus Edition modules, you must own a TCA

Quadrant Airbus Edition (sold separately). The TCA Quadrant Add-On Airbus Edition

modules are an extension of the TCA Quadrant Airbus Edition throttle quadrant, and only

work when connected to both sides of the TCA Quadrant Airbus Edition.

This modularity adds new axes and action buttons, and lets you extend the kinematics

(takeoff, in-flight and landing) of the TCA Quadrant Airbus Edition.

1. Turn all of the devices upside down and, using a screwdriver with the corresponding head

shape (not included), screw on the four attachment pieces included with the TCA

Quadrant Airbus Edition and the TCA Quadrant Add-On Airbus Edition modules, to attach

everything together.

2. Connect the speed brake module to the left of the TCA Quadrant Airbus Edition and the

flaps module to the right, using the SATA cables included with the TCA Quadrant Add-On

Airbus Edition.

*

+

1 1

1

2

1 1

2

4/14

- To avoid damaging the products, use a screwdriver with the corresponding head shape

(not included) to tighten/untighten the screws.

- Only use the official cables provided by Thrustmaster: this will allow you to update the

firmware for the TCA Quadrant Airbus Edition when necessary.

- Never position the TCA Quadrant Airbus Edition with either of the TCA Quadrant Add-On

Airbus Edition modules hanging near or off the edge of a table or desk.

5/14

INSTALLATION ON PC

1. Please visit https://support.thrustmaster.com. Click Joysticks / TCA Quadrant

Airbus Edition (or TCA Quadrant Add-On Airbus Edition), and select Drivers.

Download and install the PC driver and its customized interface for the Windows Control

Panel.

2. Once the PC driver has been installed, connect the USB connector for the TCA Quadrant

Airbus Edition to one of the USB ports on your PC.

3. To access the Control Panel, click Start / Apps / Thrustmaster / Control Panel (in

Windows® 10 / 8.1 / 8).

The Game Controllers dialog box appears.

The accessory is listed onscreen with the name TCA Q-Eng 1&2 (or TCA Q-Eng 3&4,

depending on the position of the selector switch for the engines [5] on the TCA Quadrant

Airbus Edition), along with OK status.

4. In the Game Controllers dialog box, click Properties to test and view all features,

including those related to the TCA Quadrant Add-On Airbus Edition modules.

Enable virtual buttons: This feature lets you enable or disable the virtual buttons available

on the axes for the throttle quadrant, and the speed brake module. Click Apply once you

have selected the mode you want to use.

You are now ready to play!

- In order to use the TCA Quadrant Add-On Airbus Edition modules, you must own a TCA

Quadrant Airbus Edition (sold separately).

- Visit https://support.thrustmaster.com to download the package containing the drivers

allowing you to update the product’s firmware, providing you with more detailed control of

the product’s features.

6/14

MAPPING OF THE TCA QUADRANT ADD-ON AIRBUS EDITION

MODULES’ 15 BUTTONS AND 2 AXES

22-26

18-19

21

17 20

27

28

29

30

31

0 up

ZR

65536 down

0 up

Z

65536 down

7/14

MAKING CHANGES TO THE AXES ON THE TCA QUADRANT

ADD-ON AIRBUS EDITION MODULES

The TCA Quadrant Add-On Airbus Edition modules feature mechanical selectors allowing

you to disable the detents/notches on each axis. Doing so allows you to have smooth axes,

while maintaining virtual buttons 27 through 31 on the speed brake module.

This option lets you change the piloting sensations according to the type of aircraft being

used in your simulation (commercial aircraft or civil aircraft).

1. Turn the TCA Quadrant Add-On Airbus Edition modules upside down, and unscrew the

two screws for each of the selectors using a screwdriver with the corresponding head

shape (not included).

2. Switch the position of the selectors, using the indicators as a guide: this will let you

choose either a smooth axis, or an axis with detents/notches, for each axis on the TCA

Quadrant Add-On Airbus Edition modules.

8/14

ADJUSTING THE FRICTION

IMPORTANT NOTES:

- The friction on the TCA Quadrant Add-On Airbus Edition modules is set to 50% by

default.

- In order to allow for precise adjustment according to your preferences, you can use a

screwdriver with the corresponding head shape (not included) — or the crossbar included

with the TCA Quadrant Airbus Edition — to turn the friction adjustment screws.

1. Push both TCA Quadrant Add-On Airbus Edition module levers forward to their maximum

values, and then access the friction adjustment screw at the back of each module.

2. To increase the friction, turn the friction adjustment screw clockwise.

3. To decrease the friction, turn the friction adjustment screw counterclockwise.

- To avoid damaging the friction system, be careful not to over-tighten the adjustment

screws: stop turning the screws when you feel resistance.

- Never completely unscrew the adjustment screws, to avoid the screws falling inside the

body of either TCA Quadrant Add-On Airbus Edition module.

9/14

ATTACHING THE TCA QUADRANT AIRBUS EDITION* AND

THE TCA QUADRANT ADD-ON AIRBUS EDITION MODULES

TO THE TM FLYING CLAMP*, A COCKPIT* OR OTHER

STATIONARY SURFACE

*Sold separately

You can use the 6 perforations located on the underside of the TCA Quadrant Airbus

Edition, when connected to the TCA Quadrant Add-On Airbus Edition modules, to attach all

of the devices to a stationary surface, using M6 screws (not included).

Attachment diagram for the TM Flying Clamp* (*sold separately):

10/14

T.A.R.G.E.T ADVANCED PROGRAMMING SOFTWARE

(Thrustmaster Advanced pRogramming Graphical EdiTor)

Please visit https://support.thrustmaster.com. Click Joysticks / TCA Quadrant Airbus

Edition (or TCA Quadrant Add-On Airbus Edition), then select Software. Download and

install the T.A.R.G.E.T advanced programming software.

Main features of T.A.R.G.E.T:

- Different possible configurations for the axes.

- Different possible programming levels: Basic, Advanced and Script.

- Use of the Drag and Drop principle.

- Ability to combine the TCA Quadrant Airbus Edition throttle quadrant with various

Thrustmaster joysticks (HOTAS Cougar, HOTAS Warthog, T.16000M, MFD Cougar

Pack, all of which are also compatible with T.A.R.G.E.T), allowing them to be recognized

as a single USB device.

- Access to advanced profiles created by the Thrustmaster community.

11/14

TROUBLESHOOTING AND WARNING

Visit https://support.thrustmaster.com to download the package containing the

drivers allowing you to update the product’s firmware, providing you with more detailed

control of the product’s features.

• My TCA Quadrant Add-On Airbus Edition modules aren’t working properly, or seem

to be improperly calibrated, when connected to the TCA Quadrant Airbus Edition.

- Visit https://support.thrustmaster.com to check whether a more recent firmware

version is available: if so, follow the instructions to download and install it.

- Power off your PC, and disconnect the USB connector for the TCA Quadrant Airbus

Edition throttle quadrant. Make sure that both SATA cables are properly connected to

the devices.

- Power off your PC, and disconnect the USB connector for the TCA Quadrant Airbus

Edition throttle quadrant. Then reconnect the USB connector, power on your PC

again, and restart your game.

- When connecting the USB connector for the TCA Quadrant Airbus Edition throttle

quadrant, always leave the rudder axis centered if you are using the TFRP rudder

system (sold separately): never put your feet on the TFRP rudder system’s pedals

when doing so.

• I can’t configure my TCA Quadrant Add-On Airbus Edition modules with my TCA

Quadrant Airbus Edition throttle quadrant.

- In your game’s Options / Controller / Gamepad or Joystick menu, select the

appropriate configuration or completely reconfigure the controller’s options.

- Visit https://support.thrustmaster.com to check whether a more recent firmware

version is available: if so, follow the instructions to download and install it.

- For more information, please refer to your game’s user manual or online help.

- You can also use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical

EdiTor) advanced programming software.

• My TCA Quadrant Add-On Airbus Edition modules are too sensitive, or not

sensitive enough.

- The axes for the TCA Quadrant Add-On Airbus Edition modules automatically

calibrate themselves after a few movements, and after having reached the physical

stops for the axes.

- In your game’s Options / Controller / Gamepad or Joystick menu, adjust the sensitivity

and dead zones for your controller (if these options are available).

- You can also use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical

EdiTor) advanced programming software.

These devices are intended for use with respect to gaming entertainment purposes

only. It is strictly forbidden to use these devices for professional training activities.

12/14

CONSUMER WARRANTY INFORMATION

Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P.

97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster

product shall be free from defects in materials and workmanship, for a warranty period which corresponds

to the time limit to bring an action for conformity with respect to this product. In the countries of the

European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product.

In other countries, the warranty period corresponds to the time limit to bring an action for conformity with

respect to the Thrustmaster product according to applicable laws of the country in which the consumer

was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the

corresponding country, then the warranty period shall be one (1) year from the original date of purchase of

the Thrustmaster product).

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months

from the date of original purchase.

Should the product appear to be defective during the warranty period, immediately contact Technical

Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned

to its place of purchase (or any other location indicated by Technical Support).

Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option,

be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is

subject to such reconditioning, any period of at least seven (7) days during which the product is out of use

shall be added to the remaining warranty period (this period runs from the date of the consumer’s request

for intervention or from the date on which the product in question is made available for reconditioning, if

the date on which the product is made available for reconditioning is subsequent to the date of the request

for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries

(including for consequential damages) is limited to the return to working order or the replacement of the

Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of

merchantability or fitness for a particular purpose.

This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered

damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other

cause unrelated to a material or manufacturing defect (including, but not limited to, combining the

Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable

batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) if the product has

been used for any use other than home use, including for professional or commercial purposes (game

rooms, training, competitions, for example); (3) in the event of failure to comply with the instructions

provided by Technical Support; (4) to software, said software being subject to a specific warranty; (5) to

consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or

headphone ear pads, for example); (6) to accessories (cables, cases, pouches, bags, wrist-straps, for

example); (7) if the product was sold at public auction.

This warranty is nontransferable.

The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her

country are not affected by this warranty.

13/14

Additional warranty provisions

During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support

is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of

any reconditioning procedures which Technical Support may request that the consumer carry out, by way

of written instructions – for example, due to the simplicity and the lack of confidentiality of the

reconditioning process – and by providing the consumer with the required spare part(s), where

applicable).

Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not

provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose

warranty period has expired.

In the United States of America and in Canada, this warranty is limited to the product’s internal

mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any third

party for any consequential or incidental damages resulting from the breach of any express or implied

warranties. Some States/Provinces do not allow limitation on how long an implied warranty lasts or

exclusion or limitation of liability for consequential or incidental damages, so the above limitations or

exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have

other rights which vary from State to State or Province to Province.

Liability

If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries

disclaim all liability for any damages caused by one or more of the following: (1) the product has been

modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive

use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any

use other than home use, including for professional or commercial purposes (game rooms, training,

competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all

liability for any damages unrelated to a material or manufacturing defect with respect to the product

(including, but not limited to, any damages caused directly or indirectly by any software, or by combining

the Thrustmaster product with any unsuitable element, including in particular power supplies,

rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).

DECLARATION OF CONFORMITY

CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment on and off, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

14/14

COPYRIGHT

Guillemot Corporation S.A. Windows® is a registered trademark of Microsoft Corporation in the United

States and/or other countries.

All other trademarks and brand names are hereby acknowledged and are property of their respective

owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice

and may vary from one country to another. Made in China.

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union: At the end of its working life, this product should not be disposed

of with standard household waste, but rather dropped off at a collection point for the

disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.

This is confirmed by the symbol found on the product, user manual or packaging.

Depending on their characteristics, the materials may be recycled. Through recycling and

other forms of processing Waste Electrical and Electronic Equipment, you can make a

significant contribution towards helping to protect the environment.

Please contact your local authorities for information on the collection point nearest you.

For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.

Retain this information. Colors and decorations may vary.

Plastic fasteners and adhesives should be removed from the product before it is used.

www.thrustmaster.com

*Applicable to EU, UK and Turkey only

*

TECHNICAL SUPPORT

https://support.thrustmaster.com

*

WARNING: this product can expose you to chemicals including Bisphenol A (BPA), which is

known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

1/14

Manuel de l'utilisateur

CARACTERISTIQUES TECHNIQUES

5

6

1

2

3

4

7

8

9

2/14

9

8

1. Axe Speedbrake (aérofreins)

2. 4 détentes sur l’axe + 5 boutons

virtuels

3. 6 boutons d’action

4. Axe Flaps (volets)

5. 4 détentes sur l’axe

6. 4 boutons d’action

7. Vis d’ajustement de la friction sur

chaque module

8. Mécanismes de désactivation des

crans sur chaque axe

9. Connecteurs SATA pour TCA

Quadrant Airbus Edition (vendu

séparément)

3/14

CONNECTER LES MODULES TCA QUADRANT ADD-ON AU TCA

QUADRANT AIRBUS EDITION*

*Vendu séparément

Pour utiliser les TCA Quadrant Add-On Airbus Edition, vous devez faire l’acquisition préalable

d’un TCA Quadrant Airbus Edition (vendu séparément). Les modules TCA Quadrant Add-On

Airbus Edition sont une extension de la manette des gaz TCA Quadrant Airbus Edition et ne

fonctionnent que lorsqu’ils sont connectés de part et d’autre de la manette des gaz TCA

Quadrant Airbus Edition.

Cette modularité ajoute de nouveaux axes et boutons d’action et permet d’étendre les

cinématiques de décollage, de vol et d’atterrissage de la manette des gaz TCA Quadrant

Airbus Edition.

1. Retournez le TCA Quadrant et vissez, à l’aide d’un tournevis, les quatre pièces

de fixation fournies avec la manette des gaz TCA Quadrant Airbus Edition et les

modules TCA Quadrant Add-On Airbus Edition pour solidariser l’ensemble.

2. Connectez les modules Speedbrake à gauche et Flaps à droite à l’aide des câbles

SATA fournis avec le TCA Quadrant Add-On Airbus Edition.

*

+

1 1

1

2

1 1

2

4/14

- Pour éviter d’endommager le produit, utilisez un tournevis pour serrer les vis d’ajustement.

- Seuls les câbles officiels fournis par Thrustmaster doivent être utilisés afin de pouvoir mettre

à jour le firmware du TCA Quadrant Airbus Edition le cas échéant.

- Evitez de placer le TCA Quadrant Airbus Edition avec les modules en charnière sur le bord

d’une table.

5/14

INSTALLATION SUR PC

1. Allez sur https://support.thrustmaster.com/. Cliquez sur Joysticks / TCA Quadrant

Airbus Edition (ou TCA Quadrant Add-On Airbus Edition), puis sélectionnez Pilotes.

Téléchargez et installez le pilote PC et son interface personnalisée du Control Panel Windows.

2. Une fois le pilote PC installé, branchez le connecteur USB sur l’un des ports USB de votre PC.

3. Pour accéder au Control Panel, sélectionnez Démarrer / Applications / Thrustmaster /

Control Panel ou Panneau de configuration (sous Windows® 10 / 8.1 / 8)

La boîte de dialogue Contrôleurs de jeu s’affiche.

L’accessoire apparaît à l’écran sous le nom TCA Q-Eng 1&2 (ou TCA Q-Eng 3&4, selon la

position du sélecteur 5 sur le TCA Quadrant Airbus Edition) et l’état OK.

4. Dans la boîte de dialogue Contrôleurs de jeu, cliquez sur Propriétés pour tester et

visualiser l’ensemble des fonctions qui incluent le TCA Quadrant Add-On Airbus Edition.

Enable virtual buttons (Activer les boutons virtuels) : Cette fonction permet d’activer ou

de désactiver les boutons virtuels présents sur les axes de la manette des gaz ou du module

Speedbrake. Cliquez sur Apply (Appliquer) après avoir sélectionné le mode souhaité.

Vous êtes maintenant prêt à jouer !

- Pour utiliser le TCA Quadrant Add-On Airbus Edition, vous devez faire l’acquisition préalable

d’un TCA Quadrant Airbus Edition.

- Téléchargez sur le support en ligne le package contenant les pilotes permettant de mettre à

jour le firmware et d’avoir un contrôle plus détaillé sur les fonctionnalités du produit.

Stránka sa načítava ...

Thrustmaster 2960853 Používateľská príručka

Táto príručka je tiež vhodná pre

Thrustmaster 2960853 Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty