IMILAB CMSXJ16A Home Security Camera Používateľská príručka

Typ
Používateľská príručka
IMILAB Home Security
Camera
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 21
Čeština
22 40
Slovenčina
41 59
Magyar
60 78
Deutsch
79 97
3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Read this manual carefully before use and retain it for future reference.
Product Overview
1. Status Indicator
2. Lens
3. Mic
4. MicroSD Slot (Can be revealed by pushing the lens upward)
5. Reset Button
6. Loudspeaker
7. Micro-USB Charging Port
Package Contents: IMILAB Home Security Camera Basic, user manual, wall mounting
accessories pack, USB cable
Product Installation
The IMILAB Home Security Basic can be placed on a number of horizontal surfaces, such
as a writing desk, dining table, and a coffee table. It can also be mounted on a wall.
Front View
Rear View
5
Mounting the Security Camera on a Wall
1. Drill two holes on the wall by using the base of the IMILABC 20 as a template. It is
recommended that you mark the locations of the hole with a pencil before drilling. The
diameter of each hole is approximately 6 mm, and the depth is approximately 35 mm.
2. Insert the two plastic anchors into the holes on the wall.
6
3. Make sure to position the base unit so that the arrow is pointing up. Secure the base
unit in place by tightening the screws into the plastic anchors.
4. Matching the grooves on the bottom of the camera unit with the raised area on the
base unit. Press down until the two surfaces are flush, then turn the camera unit in
either direction to lock it in position.
When mounting the security camera on a wall:
Please note that the wall must be able to support at least triple the product's total
weight.
7
Product Instructions
Set up Your System
Connect the USB adapter to the device and plug it in. The indicator of the camera will
turn yellow.
Get the MI Home APP
For the best experience, please Download the MI Home App for your smartphone by
scanning this QR or search for MI home in the APP Store.
Yellow
8
Indicator Light
Steady blue on: connected/device status is normal
Flashing blue: network error
Flashing orange rapidly: waiting for connection
Flashing orange slowly: system upgrade in progress
Installing a MicroSD Card
Make sure that the power to the security camera is already disconnected. Adjust the
camera lens upward until the MicroSD slot is revealed, then insert the MicroSD card into
the slot (the side with contact points must be facing down).
Get an Account
To set up a MI Account
Tap the MI Home icon on your mobile device
9
Click the sign up to create your account
You can use your phone number or e-mail to quick sign up
Connect to the Camera
1. Open MI Home APP, Click the top right corner “+” to add a device.
2. Please click the top right “ ” to scan the QR code on the camera bottom, or search
“IMILAB Home Security Camera Basic” to found the device.
10
3. Enter to the camera set up page, Hold the reset button back of camera for 3 seconds
until the indicator turns yellow, and hear the voice notification “waiting for connection”
from the camera, then click NEXT.
4. Please select network to connect (only support to 2.4 GHz network), then click NEXT.
11
5. Please use the camera to scan the QR code on the mobile phone until you hear
“Scanned successfully” from the camera, then click NEXT button to connect.
12
Real-time Surveillance
Launch the Mi Home/Xiaomi Home app and select a IMILAB Home Security Camera that
is already connected to monitor the surroundings in real-time. The camera’ s control
interface allows you to adjust the sharpness of the image, as well as to change the
device’ s vertical and horizontal viewing angles.
Additional features such as screen capture or record and remote communications can
also be performed.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home/Xiaomi Home app and your smartphone model.
13
Supporting Infrared and Image-intensified Night Vision
With the incorporation of the eight infrared Illuminators, the security camera is able to
view up to a distance of 9 meters, so the camera can clearly capture video in the dark.
Infrared night vision mode sample:
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home/Xiaomi Home app and your smartphone model.
14
Playback
IMILAB Home Security Camera Basic’s playback feature is only available after installing a
compatible MicroSD card. Once a MicroSD card has been installed and the security
camera is turned on, videos will be recorded automatically. After entering the user
interface of the Playback feature, simply slide the bar on the timeline to select the time
period you wish to view.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home platform and your smartphone model
15
Automatic Surveillance
Automatic monitoring can be configured through the IMILAB Home Security
Camera Basic control interface in the Mi Home App.
Available options include 24-hour, daytime, and night-time monitoring. You can
also create your own schedule and set the desired camera angle.
This product is able to detect movements within its field of view. Once
movements are detected, a video is recorded, and you will receive a notification.
16
Shared Remote Viewing
Through the IMILAB Home Security Camera Basic control interface in the Mi Home app,
you can set your security camera as a shared device under the general settings menu
and invite your friends to view the camera remotely.
Your friends will be required to download the Mi Home/Xiaomi Home app and log in
with his/her Xiaomi account.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home app and your smartphone model.
17
Precautions
"The suitable operating temperature range for this product is between -10 C 40 C.
Please do not use the product in an environment with temperatures above or below the
specified range.
"The security camera is a precision electronic product. In order to ensure its normal
operation, please do not install the device in an environment with high humidity levels
or allow water to enter the product.
"To improve the product's performance, please do not place the camera lens facing or
next to a reflective surface, such as glass windows/doors and white walls, which will
cause the image to appear overly bright in areas close to the camera and darker in areas
further away, or cause the camera to produce white images.
'Please install the product in areas with Wi-Fi reception, and try to place the device
where the Wi-Fi signal is strong. In addition, please keep the security camera away from
metal structures, microwave ovens, or other locations where signal strength may be
impacted.
18
Specifications
Name: IMILAB Home Security Camera Basic
Model: CMSXJ16A Lens Angle: 110° Net Weight: 182 g
Video Encoding: H.265 Resolution: 1920 x 1080
Focal Length: F3.2
Item Dimensions: 108 x 76 x 76 mm
Power Input: 5 V 2 A
Operating Temperature: -10 °C 40 °C
Expandable Memory: MicroSD card (up to 64 GB)
Compatible With: Android 4.4, iOS 9.0 or later
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Manufactured: Shanghai Imilab Technology Co., Ltd.
(a Mi Ecosystem company)
Address: Room 908, No. 1, Lane 399, Shengxia Rd., China Pilot Free Trade Zone,
Shanghai, China 201210
For further information, please go to www.imilab.com.
19
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as
batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
20
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: IMILAB Home Security Camera
Model / Type: CMSXJ16A
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97

IMILAB CMSXJ16A Home Security Camera Používateľská príručka

Typ
Používateľská príručka