i safe MOBILE MOBILE IS120.1 Používateľská príručka

  • Dobrý deň! Prečítal som si prevádzkový návod pre i.safe MOBILE IS120.1 M120A01 a som pripravený odpovedať na vaše otázky. Návod podrobne popisuje používanie tohto priemyselného telefónu, vrátane bezpečnostných pokynov pre použitie v prostredí s nebezpečenstvom výbuchu a informácie o nabíjaní a pripájaní schváleného príslušenstva. K dispozícii sú aj pokyny na riešenie problémov. Neváhajte sa ma opýtať na čokoľvek, čo vás zaujíma.
  • Kde nájdem aktuálny prevádzkový návod?
    Aké príslušenstvo je schválené pre použitie s týmto zariadením?
    Ako sa nabíja zariadenie?
    Čo mám robiť v prípade poruchy zariadenia v prostredí s nebezpečenstvom výbuchu?
I S12 0 .1
OPERATING MANUAL
MODEL M120A01
Document No. 1049MM10REV03
Version: 2021-11-04
(c) 2021 i.safe MOBILE GmbH
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
Tel. +49 9343 60148-0
www.isafe-mobile.com Template: TEMPMM01REV10
CONTENTS
English.............................................................................. 4
Deutsch............................................................................ 16
Česky .............................................................................. 28
Dansk.............................................................................. 40
Español ............................................................................ 52
Suomi.............................................................................. 64
Fraais............................................................................ 76
Magyar ............................................................................ 88
Italiano ........................................................................... 100
Nederlands ....................................................................... 112
Norsk ............................................................................. 124
Polski ............................................................................. 136
Português (EU).................................................................... 148
Português (BR).................................................................... 160
Русский........................................................................... 172
Svenska........................................................................... 184
Hrvatski........................................................................... 196
Slovenská........................................................................ 208
Српски ........................................................................... 220
Japanese.......................................................................... 232
Arabic ........................................................................... 244
This Operating Manual complies with these standards:
IEC 60079, IEC 82079, ANSI Z535.6
Diese Bedienungsanleitung erfüllt die Anforderungen der folgenden Normen:
IEC 60079, IEC 82079, ANSI Z535.6
4
ENGLISH
READ AND UNDERSTAND THE INSTRUCTIONS
PROTECT YOUR LIFE AND READ THE OPERATING MANUAL
This Operating Manual is part of the device IS120.1 (model M120A01). This Operating Manual
provides important information for safe use of the device.
Before using the device, read this Operating Manual carefully and pay particular attention
to the “Safety” section and the warnings highlighted with the warning symbol.
Also read the Safety Instructions before using the device.
You can nd these at www.isafe-mobile.com/en/support/downloads.
Make sure you have access to this Operating Manual when you need it. You can nd the
current Operating Manual at www.isafe-mobile.com/en/support/downloads.
Follow all instructions given on the device and on the packaging.
Follow local safety regulations.
INTENDED USE
The IS120.1 is a communication device for industrial use in explosion hazardous areas of Zone
1/21 and 2/22, in accordance with Directives 2014/34/EU, 1999/92/EC and the IECEx system,
among others.
Only use the device as described in this Operating Manual. Any other use is considered impro-
per and can lead to death, severe injuries and damage to the device.
The manufacturer i.safe MOBILE GmbH does not assume any liability for damage caused by
improper use. The warranty expires in the event of improper use.
EN 5
WARRANTY
You can nd the warranty conditions at
www.isafe-mobile.com/en/support/service.
EU DECLARATION OF CONFORMITY
You will nd the EU declaration of conformity at
www.isafe-mobile.com/en/support/downloads.
EX MARKINGS
ATEX:
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135°C Db
EU Type Examination Certicate:
EPS 21 ATEX 1 107 X
CE-designation: 2004
IECEx:
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db
IECEx Certicate: IECEx EPS 21.0040X
Temperature range:
-20°C … +60°C (EN/IEC 60079-0)
-10°C … +50°C (EN/IEC 62368-1)
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
6
DEVICE OVERVIEW/FUNCTIONS
11
6
7
8
5
4
9
12
13
14
19
3
1215
16
18
10
17
EN 7
1 SENSORS: Proximity sensor, light sensor.
2 LOUDSPEAKER
3 LOUDNESS CONTROL: Volume up/Volume down.
4 FUNCTION KEY RED FUNCTION KEY: Optional key used by dierent apps.
5 BACK KEY: Go to the previous screen.
6 DELETE KEY: To delete characters entered incorrectly.
7 POWER KEY: A long press switches the device on/o. A short press ends a call.
8 CHARGING CONTACTS
9 NAVIGATION RING AND CONFIRMATION KEY
10 KEYPAD
11 ANSWER KEY
12 FUNCTION KEY (M1): Optional key used by dierent apps.
13 HOME KEY: Switch to the main screen.
14 FUNCTION KEY SIDE KEY: Optional key used by dierent apps.
15 NOISE CANCELLING: Noice cancelling microphone.
16 EYELET: Eyelet for hand strap.
17 LOUDSPEAKER: Speaker for hands-free function.
18 BATTERY COMPARTMENT
19 USB INTERFACE:
Connection for the i.safe PROTECTOR1.0 Micro USB Cable. Also see
sections “Charging” and “Connecting approved accessories”.
8
SAFETY
Read the “Safety” section of this Operating Manual carefully before using the device. If you
do not follow these instructions or do not understand them, this could lead to death, severe
injuries and damage to the device.
USER
Only trained users who are qualied in the use of Ex devices in explosion hazardous areas and
who have read and understood this Operating Manual may use this device.
USE IN EXPLOSION HAZARDOUS AREAS
DANGER
Improper use can result in death or severe injuries!
Only use the device in explosion hazardous areas of zones1/21 and2/22 or outside of
explosion hazardous areas.
Before entering a explosion hazardous area with the device,
make sure that only approved accessories are connected to the device, see section
“Connecting approved accessories”,
make sure that no gap can be seen between the two halves of the device,
make sure the device is not damaged,
make sure that all the labels on the device are readable,
make sure the battery compartment is screwed tight.
If you use the device in a explosion hazardous area,
read and follow the instructions in the “Possible User Errors” section.
Switch o the device immediately and leave the explosion hazardous area without delay if
malfunctions occur on the device,
you have damaged the housing of the device,
you have exposed the device to excessive loads,
the labels on the device are no longer readable.
USE OUTSIDE OF EXPLOSION HAZARDOUS AREAS
DANGER
Improper use can result in death or severe injuries!
Do not use the device in places where its use is prohibited.
Turn o the device in clinics or other medical facilities.
Always keep a safety distance of at least 15cm between the device and a pacemaker or
hearing aid. The device can aect the functioning of medical devices such as pacemakers and
hearing aids.
When using the device while driving a motor vehicle, be sure to comply with applicable
national laws.
Make sure you prevent the user errors described in the section entitled “Possible User Errors”.
Only charge the device as described in the “Charging” section.
EN 9
NOTICE
Incorrect use can damage the device.
Only use accessories approved by i.safe MOBILE, as described in the section on
“Connecting approved accessories”.
Protect the device and the Power Adapter from strong electrical magnetic elds as for examp-
le those emitted by induction cookers or microwave ovens, for example.
Do not touch the display with sharp objects.
POSSIBLE USER ERRORS
DANGER
Improper use can result in death or severe injuries! Follow the instructions below:
Do not modify the device structurally.
Do not expose the device to high temperatures.
Do not expose the device to strong UV radiation.
Do not expose the device to processes with high electrical charges.
Do not expose the device to aggressive acids or bases.
When working in explosion hazardous areas, please note:
Do not loosen the screws on the device.
Do not connect any accessories to the device.
Do not open any interface cover.
Do not charge the device.
Do not open the device.
Do not damage the device.
SCOPE OF DELIVERY
Your device packaging contains the following:
1 x IS120.1
1 x Battery
1 x Quick Start Manual
1 x Safety Instructions
1 x Display Protection Foil
1 x i.safe PROTECTOR1.0 Micro USB Cable
1 x Power Adapter universal (power supply unit and various country-specic adapters)
1 x Torx Screwdriver
1 x Display cleaning cloth
10
INSTALLING THE BATTERY
DANGER
Installing the wrong battery in the device, poses a risk of explosion, which could result in
death or serious injuries! Only t the battery supplied or an approved replacement battery in
the device outside of explosion hazardous areas. The approved replacement battery can be
found on the website www.isafe-mobile.com/en/products.
Loosen the screws on the battery compartment using the Screwdriver provided.
Remove the battery compartment cover.
Place the battery in the battery compartment as shown.
Check that the battery is seated correctly and securely.
Reinstall the battery compartment cover and hand-tighten the screws using the Screwdriver
provided.
EN 11
INSERT/REMOVE SIM CARD
DANGER
An incorrect procedure in explosion hazardous areas poses a risk of death or severe injuries!
Only open the device outside of explosion hazardous areas to insert or remove the SIM card.
NOTICE
Proceeding incorrectly when inserting/removing the SIM card can damage the device and
the SIM card. Switch o the device before inserting or removing a SIM card. Do not charge the
device while inserting or removing a SIM card.
Loosen the screws on the battery compartment using the Screwdriver provided.
Remove the battery compartment cover.
Remove the battery from the battery compartment.
Insert the SIM card into the slot. The slot is marked „SIM“.
Reinstall the battery. See section “Installing the battery.
12
CHARGING
DANGER
An incorrect procedure in explosion hazardous areas poses risk of death or severe injuries!
Only charge the device outside of explosion hazardous areas. Do not charge the device in the
vicinity of ammable substances.
NOTICE
Incorrect charging can cause damage to the device. Please note the following when charging:
Only charge the device using the i.safe PROTECTOR1.0 Micro USB Cable supplied.
Only charge the device at ambient temperatures between +5°C to +35°C (+41°F to +95°F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
Your device package contains a power supply unit, various country-specic adapters, an
i.safe PROTECTOR1.0 Micro USB Cable.
Connect the adapter suitable for your country to the power supply unit.
Connect the i.safe PROTECTOR1.0 Micro USB Cable to the power supply unit.
Connect the i.safe PROTECTOR1.0 Micro USB Cable to the USB interface of the device.
SWITCHING ON/OFF
Press and hold the on/o key for about 3 seconds.
Enter the device or SIM PIN when the input dialog for the device or SIM PIN appears after
switching on.
Select the <Switch o> menu item if the power o menu appears when switching o.
USING THE DEVICE
When turning on the device for the rst time, follow the instructions on the screen.
Further information on operating the device can be found at
www.isafe-mobile.com/en/support/service under the menu item “FAQ”.
EN 13
CONNECTING APPROVED ACCESSORIES
Only connect accessories approved by i.safe MOBILE to the device. Accessories approved by
i.safe MOBILE can be found at www.isafe-mobile.com/en/products.
Approved accessories can be connected to the USB interface.
USB INTERFACE
DANGER
Improper use can result in death or severe injuries! Only use USB interface outside of explosi-
on hazardous areas. Under no circumstances should you open the cover of the USB interface
in explosion hazardous areas.
The USB interface is used for charging and data transfer.
Connect approved accessories or other devices to the USB interface only by using the
i.safe PROTECTOR1.0 Micro USB Cable.
CHANGING THE BATTERY
WARNING
If you replace the battery with the wrong battery in the device, there is a risk of explosion,
which could result in death or serious injuries! Only replace the battery with an approved
replacement battery outside of explosion hazardous areas. An approved replacement battery
can be found on the website www.isafe-mobile.com/en/products.
Loosen the screws on the battery compartment using the Screwdriver provided.
Remove the battery compartment cover.
Remove the battery from the battery compartment.
14
Place the approved replacement battery in the battery compartment.
Check that the battery is seated correctly and securely.
Reinstall the battery compartment cover and hand-tighten the screws using the Screwdriver
provided.
POSSIBLE DEVICE PROBLEMS
You can nd information on possible device problems and how to rectify them at
www.isafe-mobile.com/en/support/service under the menu item “FAQ”.
If you have any further questions, please contact the i.safe MOBILE repair service at
www.isafe-mobile.com/en/support/service.
MAINTENANCE/REPAIR
The device itself has no serviceable parts.
WARNING
Incorrect repairs present a risk of explosion or re, which can result in death or severe injuries!
Do not open the device or carry out any repairs yourself.
Contact the i.safe MOBILE repair service at www.isafe-mobile.com/en/support/service if
the device is not working normally, if the device needs to be repaired or if a replacement part
is required.
RETURN SHIPMENT
Contact the i.safe MOBILE repair service at www.isafe-mobile.com/en/support/service.
DISTRIBUTION PARTNER
You can nd the specialist distribution partner responsible for your country at
www.isafe-mobile.com/en/contact.
EN 15
CLEANING
NOTICE
Incorrect cleaning can cause damage to the device. Please note the following when cleaning:
Turn o the device before cleaning.
Do not charge the device while cleaning.
Do not use chemical agents for cleaning.
Clean the device and the Power Adapter with a soft, moistened antistatic cloth.
Clean the display screen regularly with a soft, antistatic cloth.
STORAGE
NOTICE
Incorrect storage can cause damage to the device. Store the device at ambient temperatures
between +5°C to +35°C (41°F to +95°F) and a humidity between 10 % to 60 %.
RECYCLING
NOTICE
Incorrect disposal of electronic products, batteries and packaging material puts the environ-
ment at risk. Please note the following when disposing of items:
DO NOT throw away batteries with household waste.
Always dispose electronic products, batteries and packaging material at the appropri-
ate collection points. This way, you prevent uncontrolled waste disposal and promote
the recycling of material resources.
You can obtain further information from regional waste disposal companies, state authorities or
the i.safe MOBILE service centre responsible for your country or region at
www.isafe-mobile.com/en/support/service.
TRADEMARKS
i.safe MOBILE and the i.safe MOBILE logo are registered trademarks of the
i.safe MOBILE GmbH.
All other trademarks and copyrights are the properties of their respective owners.
16
DEUTSCH
ANWEISUNGEN LESEN UND VERSTEHEN
SCHÜTZEN SIE IHR LEBEN UND LESEN SIE DIE BEDIENUNGSANLEITUNG
Diese Bedienungsanleitung ist Teil des Geräts IS120.1 (Modell M120A01). Die Bedienungsan-
leitung liefert wichtige Informationen für eine sichere Verwendung des Geräts.
Lesen Sie vor der Verwendung des Geräts diese Bedienungsanleitung sorgfältig durch und
beachten Sie insbesondere den Abschnitt „Sicherheit“ und die mit dem Warnsymbol hervor-
gehobenen Warnhinweise.
Lesen Sie vor der Verwendung des Geräts auch die Sicherheitsvorschriften. Diese nden Sie
unter www.isafe-mobile.com/de/support/downloads.
Sorgen Sie dafür, dass Sie bei Bedarf Zugri auf diese Bedienungsanleitung haben.
Die aktuelle Bedienungsanleitung nden Sie unter www.isafe-mobile.com/de/support/
downloads.
Beachten Sie alle Anweisungen auf dem Gerät und auf der Verpackung.
Befolgen Sie die örtlichen Sicherheitsvorschriften.
BESTIMMUNGSGEMÄSSE VERWENDUNG
Das IS120.1 ist ein Kommunikationsgerät für den industriellen Einsatz in explosionsgefähr-
deten Bereichen
der Zone 1/21 und 2/22 unter anderem nach den Richtlinien 2014/34/EU,
1999/92/EG
und dem IECEx-System.
Verwenden Sie das Gerät nur, wie in dieser Bedienungsanleitung beschrieben. Jede andere
Verwendung gilt als nicht bestimmungsgemäß und kann zu Tod, schweren Verletzungen und
Schäden am Gerät führen.
Der Hersteller i.safe MOBILE GmbH übernimmt keine Haftung für Schäden, die durch nicht
bestimmungsgemäße Verwendung entstanden sind. Die Garantie erlischt bei nicht bestim-
mungsgemäßer Verwendung.
DE 17
GARANTIE
Die Garantiebestimmungen nden Sie unter
www.isafe-mobile.com/
de/
support/service
.
EUKONFORMITÄTSERKLÄRUNG
Die EU-Konformitätserklärung nden Sie unter
www.isafe-mobile.com/
de/support/downloads.
EXKENNZEICHNUNGEN
ATEX:
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135°C Db
EU-Baumusterprüfbescheinigung:
EPS 21 ATEX 1 107 X
CE-Kennzeichnung: 2004
IECEx:
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db
IECEx-Zertikat: IECEx EPS 21.0040X
Temperaturbereich:
-20°C … +60°C (EN/IEC 60079-0)
-10°C … +50°C (EN/IEC 62368-1)
Hersteller:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
18
GERÄTEÜBERSICHT/FUNKTIONEN
11
6
7
8
5
4
9
12
13
14
19
3
1215
16
18
10
17
DE 19
1 SENSOREN: Näherungssensor, Lichtsensor.
2 LAUTSPRECHER
3 LAUTSTÄRKEREGELUNG: Lauter/Leiser.
4 FUNKTIONSTASTE RED FUNCTION KEY: Eigene Tastenbelegung möglich.
5 ZURÜCKTASTE: Wechsel zum vorherigen Bildschirm.
6 LÖSCHEN TASTE: Zum Löschen falsch eingegebener Zeichen.
7 AN-/AUSTASTE:
Langer Druck schaltet das Gerät an/aus. Kurzer Druck beendet ein
Gespräch
.
8 LADEKONTAKTE
9 NAVIGATIONSRING UND BESTÄTIGUNGSTASTE
10 TASTATUR
11 GESPRÄCHANNAHMETASTE
12 FUNKTIONSTASTE M1: Eigene Tastenbelegung möglich.
13 HOMETASTE: Wechsel zum Hauptbildschirm.
14 FUNKTIONSTASTE SIDE KEY: Eigene Tastenbelegung möglich.
15 NOISE CANCELLING: Mikrofon zur Geräuschunterdrückung.
16 ÖSE: Öse zum Befestigen der Handschlaufe
17 LAUTSPRECHER: Lautsprecher für Freisprechfunktion.
18 BATTERIEFACH
19 USBSCHNITTSTELLE: Anschluss für das i.safe PROTECTOR1.0 Micro USB-Kabel.
Siehe auch Abschnitte „Laden“ und „Freigegebenes Zubehör anschließen“.
20
SICHERHEIT
Lesen Sie vor der Verwendung des Geräts den Abschnitt „Sicherheit“ in dieser Bedienungs-
anleitung sorgltig durch. Wenn Sie die Sicherheitshinweise nicht beachten oder nicht
verstehen, kann dies zu Tod, schweren Verletzungen und Schäden am Gerät führen.
BENUTZER
Nur geschulte Benutzer, die für den Einsatz von Ex-Geräten in explosionsgefährdeten Bereichen
qualiziert sind und diese Bedienungsanleitung gelesen und verstanden haben, dürfen dieses
Gerät benutzen.
EINSATZ IN EXPLOSIONSGEFÄHRDETEN BEREICHEN
GEFAHR
Durch falsche Verwendung besteht Gefahr von Tod und schweren Verletzungen!
Verwenden Sie das Gerät nur in explosionsgefährdeten Bereichen der Zonen
1/21 und 2/22
oder außerhalb von explosionsgefährdeten Bereichen.
Bevor Sie mit dem Gerät einen explosionsgefährdeten Bereich betreten
stellen Sie sicher, dass nur freigegebenes Zuber am Gerät angeschlossen ist,
siehe Abschnitt „Freigegebenes Zubehör anschließen“,
stellen Sie sicher, dass zwischen den beiden Gerätehälften kein Spalt erkennbar ist,
stellen Sie sicher, dass das Gerät nicht beschädigt ist,
stellen Sie sicher, dass alle Beschriftungen auf dem Gerät lesbar sind,
stellen Sie sicher, dass die Batteriefach-Abdeckung fest verschraubt ist.
Wenn Sie das Gerät innerhalb eines explosionsgefährdeten Bereiches verwenden,
lesen und beachten Sie die Anweisungen im Abschnitt „Mögliche Benutzerfehler.
Schalten Sie das Gerät sofort aus und verlassen Sie umgehend den explosionsgefährdeten
Bereich, wenn
am Gerät Fehlfunktionen auftreten,
Sie das Gehäuse des Geräts beschädigt haben,
Sie das Gerät übermäßigen Belastungen ausgesetzt haben,
die Beschriftungen auf dem Gerät nicht mehr lesbar sind.
EINSATZ AUSSERHALB EXPLOSIONSGEFÄHRDETER BEREICHE
GEFAHR
Durch falsche Verwendung besteht Gefahr von Tod und schweren Verletzungen!
Benutzen Sie das Gerät nicht an Orten, an denen das Benutzen verboten ist.
Schalten Sie das Gerät in Kliniken oder anderen medizinischen Einrichtungen aus.
Halten Sie immer einen Sicherheitsabstand von mindestens 15 cm zwischen Gerät und
einem Herzschrittmacher oder einer Hörhilfe ein. Das Gerät kann die Funktion von
medizinischen Geräten wie Herzschrittmachern oder Hörhilfen beeinussen.
Achten Sie bei der Verwendung des Geräts während der Steuerung eines Kraftfahrzeugs
auf die entsprechenden Landesgesetze.
Verhindern Sie unbedingt die Benutzerfehler, die im Abschnitt „Mögliche Benutzerfehler“
beschrieben sind.
Laden Sie das Gerät nur so, wie es im Abschnitt „Laden“ beschrieben ist.
/