Stránka sa načítava...
Design: Hyunwoo Lim HQ R&D PIC: Jungran Kim Product Vacuum Cleaner
Size: 148mm x 210mm Material: Wood Free 60g Model/PJT VR8000
Page: 784 Print Color: Black Part Code DJ68-00857G_GE
Date: 2022-05-10 Post Processing : Cut Rev No 00 → 01
ENGLISH COLOR representative color HUNGARY
AIRBORNE WHITE FEHÉR
BLACK BLACK FEKETE
EBONY BLACK BLACK FEKETE
BLUE BLUE KÉK
BLUE COSMO BLUE KÉK
DEEP BLUE BLUE KÉK
EARTH BLUE BLUE KÉK
MIDNIGHT BLUE BLUE KÉK
POP BLUE BLUE KÉK
POP CYAN BLUE KÉK
VITALITY BLUE BLUE KÉK
IRON RED RED PIROS
RED FLAME RED PIROS
POP RED RED PIROS
PORSCHE RED RED PIROS
VITALITY RED RED PIROS
CAMPBELL PURPLE PURPLE LILA
ART WORK SPEC
Changes Note: 2, 3, 10, 12, 15, 22, 26, 28, 30, 36, 37, 40, / REV. UP
MERLOT PURPLE PURPLE LILA
CARMEN WINE PURPLE LILA
DARK TITAN GRAY SZÜRKE
NEUTRAL GRAY GRAY SZÜRKE
METAL ORANGE ORANGE NARANCSSÁRGA
SACRED SPARK ORANGE NARANCSSÁRGA
POP YELLOW YELLOW SÁRGA
PURE BURGUNDY BURGUNDY BURGUNDI VÖRÖS
URBAN GREEN GREEN ZÖLD
TRUFFLE METAL BARNA METÁL
Jet Bot
User manual
VR30T80**** series
• Before operating this unit, please read the instructions carefully.
• For indoor use only
VR8000_17ge_00857G-01_GE.indb 1 2022-05-10 오후 1:19:11
Contents
PREPARATION
Safety information 3
INSTALLATION
Installing a Docking Station 13
OPERATION
Charging the Jet Bot 14
OPERATION
Using the Jet Bot 17
Basic use 17
Operation status on the LED Status Indicator
18
Cleaning Functions 19
Additional functions 20
Attaching Boundary Markers 21
Parts diagram 22
Jet Bot 22
Docking Station 22
MAINTENANCE
Cleaning the Jet Bot 23
Emptying and cleaning the Dustbin 23
Cleaning the brush 24
Cleaning the Sensor Window 25
Cleaning the Driving Wheel 25
Cleaning the Side Brush 26
APPENDIX
SmartThings App 27
Setting up the wireless router 27
Downloading the SmartThings App 28
Setting up a SAMSUNG account 28
Registering a device to the SmartThings App
28
Software Update 29
Functions of the SmartThings App 30
Notes and cautions 32
Installation 32
Charging 32
Using 33
Cleaning and maintenance 34
Battery usage 35
Corrective measures before reporting a
problem 36
Troubleshooting 38
Open Source Announcement 43
How to reset to the factory default 43
Product Specication 44
English
2
VR8000_17ge_00857G-01_GE.indb 2 2022-05-10 오후 1:19:11
PREPARATION
PREPARATION
Safety information
• Before operating the appliance, please read this manual thoroughly and
retain it for your reference.
• Because the following operating instructions cover various models, the
characteristics of your vacuum cleaner may differ slightly from those
described in this manual.
Caution/Warning symbols used
WARNING
Indicates that a danger of death or serious injury exists.
CAUTION
Indicates that a risk of personal injury or material damage exists.
Other symbols used
NOTE
Indicates that the following text contains additional important information.
Accessories
Accessories may differ depending on the models.
Docking Station Pre-motor Filter: 2units
(Inside the product: 1unit,
Spare: 1unit)
Side Brush: 2units
(Inside the product: 1unit,
Spare: 1unit)
Battery Charger/Power cord Boundary Markers User Manual
English
3
VR8000_17ge_00857G-01_GE.indb 3 2022-05-10 오후 1:19:13
PREPARATION
Failure to meet these requirements could cause damage to the internal parts
of the vacuum and void your warranty.
General
• Do not allow to be used as a toy. Close attention is necessary when used
by or near children.
• Use only as described in this manual.
• Do not operate the Jet Bot or the Docking Station if it has been damaged
in any way.
• If the vacuum cleaner is not working as it should, has been dropped,
damaged, left outdoors, or dropped in water, return it to a customer care
center.
• Do not handle the Docking Station or the Jet Bot if your hands are wet.
• Use only on dry, indoor surfaces.
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children should not play with the appliance.
Children should not clean or perform maintenance on the vacuum without
adult supervision.
• Move the cords of other appliances so they are not in the area that is to
be cleaned.
• Do not operate the vacuum in a room where an infant or child is sleeping.
• Do not operate the vacuum in an area where there are lit candles or
fragile objects on the oor.
• Do not operate the vacuum in a room that has lit candles on furniture that
the vacuum may accidentally hit or bump into.
• Do not allow children to sit on the vacuum.
• Do not use the vacuum on a wet surface.
• If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualied person in order to avoid a hazard.
English
4
VR8000_17ge_00857G-01_GE.indb 4 2022-05-10 오후 1:19:13
PREPARATION
• For information on Samsung’s environmental commitments and product
specic regulatory obligations e.g. REACH (WEEE, Batteries) visit:
samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/
data_corner.html
Docking Station
• Do not modify the polarized plug to t a non-polarized outlet or extension
cord.
• Do not use outdoors or on wet surfaces.
• Unplug the Docking Station from the outlet when not in use and before
servicing.
• Use only the Docking Station supplied by the manufacturer to recharge.
• Do not use with a damaged cord or a plug or a loose power outlet.
• Do not pull or carry by the cord, use the cord as a handle, close the door
on the cord, or pull the cord around sharp edges or corners. Keep the cord
away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying
capacity.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the
cord.
• Do not mutilate or incinerate batteries as they will explode at high
temperatures.
• Do not attempt to open the Docking Station. Repairs should only be
carried out by a qualied customer care center.
• Do not expose the Docking Station to high temperatures or allow moisture
or humidity of any kind to come into contact with the Docking Station.
• Do not charge the non-rechargeable batteries with the Docking Station.
English
5
VR8000_17ge_00857G-01_GE.indb 5 2022-05-10 오후 1:19:13
PREPARATION
Jet Bot
• Do not pick up hard or sharp objects such as glass, nails, screws, coins,
and etc.
• Do not use without a lter in place. When servicing the unit, never put
ngers or other objects into the fan chamber in case the unit accidentally
turns on.
• Do not put any objects into openings. Do not use with any openings
blocked; keep openings free of dust, lint, hair, and anything that may
reduce air ow.
• Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner,
etc.).
• Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
• Do not use to pick up ammable or combustible liquids such as gasoline
or use in areas where they may be present.
• Also do not use in:
– Locations with candles or desk lamps on the oor.
– Locations with unattended res (re or embers).
– Locations with distilled alcohol, thinner, ashtrays with burning
cigarettes, etc.
• Do not use the Jet Bot in an enclosed space lled with vapors given off by
oil based paint, paint thinner, moth proong substances, ammable dust,
or other explosive or toxic vapors.
• Leaks from battery cells can occur under extreme usage or temperature
conditions. If the liquid gets on the skin, wash quickly with water. If the
liquid gets into the eyes, ush them immediately with clean water for a
minimum of 10 minutes. Seek medical attention.
English
6
VR8000_17ge_00857G-01_GE.indb 6 2022-05-10 오후 1:19:14
PREPARATION
Power related
WARNING
• Please prevent any risk of electric shock or re.
– Do not damage the power cord.
– Do not pull the power cord too hard or touch the power plug with wet
hands.
– Do not use a power source other than rated volatge of the charger and
also do not use a multi-outlet to supply power to a number of devices at
the same time. (Do not leave the cord carelessly on the oor.)
– Do not use a damaged power plug, a power cord or a loose power outlet.
• Clean dust or any foreign matter on the pin and the contact part of the
power plug.
– There is a risk of electric shock or malfunction.
Before use
WARNING
• Do not use the Jet Bot near a heater or combustible materials.
– Do not use the Jet Bot near re or ame such as a movable heater, a
candlelight, a desk lamp, a replace, etc. or in a place where combustible
materials such as gasoline, alcohol, thinner, etc. exist.
• Make sure there are no dangerous objects around the Jet Bot’s cleaning
area to prevent collision and unplug any electric heaters or fans.
– The Jet Bot can be damaged or malfunction.
• The Jet Bot is intended for household use therefore do not use it in an
attic, basement, storage, an industrial building, out of indoor space, places
with moisture (such as a bathroom, a laundry room), on the table or
shelves.
– The Jet Bot can be damaged or malfunction.
• Attach the Boundary Markers to a place where the Jet Bot may fall such
as a stair or a banister to prevent product damage and injury.
– Please keep the Cliff Sensor clean all the time for safety.
English
7
VR8000_17ge_00857G-01_GE.indb 7 2022-05-10 오후 1:19:14
PREPARATION
• Be sure the Jet Bot does not suck in or touch any kind of liquids (water,
beverage, lth, etc.).
– The Jet Bot can be severely damaged and it may contaminate other
areas if the wheels pass through liquid.
• Do not spill any liquids on the Docking Station.
– There is a risk of re or electric shock.
• Do not use the Docking Station for anything other than its intended
purposes.
– There is a risk of re or severe damage to the Docking Station.
• Always keep the Cliff Sensor clean for your safety.
• As this wireless installation may cause radio interference, it cannot
provide a service related with human safety.
CAUTION
• Insert the Dustbin before using the Jet Bot.
• When installing the Docking Station, do not leave the cord carelessly on
the oor since the Jet Bot may get tangled by it.
• To clean all areas of your house, open all rooms and set the No-go Zones
with the SmartThing App or attach the Boundary Markers to the places
where the Jet Bot may get damaged such as a front door, a veranda, a
bathroom, and stairs for safety.
• Follow these recommendations for proper automatic recharging.
– Always turn on the power of the Docking Station.
– Install the Docking Station where the Jet Bot can easily nd.
– Do not leave any objects in front of the Docking Station.
• Do not use the Jet Bot on black colored oors.
– The Jet Bot may not be able to operate normally.
• Do not place any objects within 0.5 m of either side of the Docking Station
or within 1m of the front of the Docking Station.
• Make sure the Docking Station’s charging contact is not damaged or have
any foreign matter on it.
English
8
VR8000_17ge_00857G-01_GE.indb 8 2022-05-10 오후 1:19:14
PREPARATION
• For the very low areas where the Jet Bot may get stuck, set the No-
go Zones with the SmartThing App or attach the Boundary Markers to
prevent the Jet Bot from getting in.
• Do not install the Docking Station in an area with a dark oor.
– If the oor around the Docking Station is dark, recharging is hindered.
• Move any obstacles that may disturb the Jet Bot’s movement (such as
children’s indoor swing or slides) before cleaning.
• Do not use the Jet Bot in a place which is narrower than its turning radius
0.5m or less.
• Before operating the Jet Bot, remove the objects which could break such
as glass, a frame, a mirror, and porcelain items so that the Jet Bot works
without interruption.
• If a brush or a brush cover is not assembled correctly, scratches may occur
on the oor, or product malfunction may occur.
• Use both hands to carry the product.
• Do not place the Docking Station in a place where people pass by
frequently, in entrance way or narrow passage.
– People may trip over it and be injured, or product damage may occur.
• Do not push the Docking Station.
English
9
VR8000_17ge_00857G-01_GE.indb 9 2022-05-10 오후 1:19:14
PREPARATION
In use
WARNING
• If any abnormal sounds, smells or smoke come from the Jet Bot,
immediately shut off the power switch of the Jet Bot and contact a service
center.
CAUTION
• Using the Jet Bot on a thick carpet may damage both the Jet Bot and the
carpet.
– The Jet Bot cannot pass over a carpet with ber longer than 2 cm.
• Do not use the Jet Bot on tables or other high surfaces.
– There is a risk of damage if it falls.
• The Jet Bot may bump into chairs or desk legs, therefore move them away
for faster and efcient cleaning.
• When the Jet Bot is operating, do not lift it up or carry it to another area.
• Do not hold by Driving Wheels of the Jet Bot when carrying it to another
area.
• Do not put any objects on top of the Jet Bot since it may cause
malfunction of the LiDAR sensor or the Jet Bot.
• Remove any large papers or plastic bags immediately when using the Jet
Bot since they may block the intake.
• Do not lie down around the Jet Bot that is running.
– Your hair may be caught in the brush, resulting in physical injury.
• Do not allow children to play with the Jet Bot.
• Make sure hair, ngers, clothes do not get caught in a Side Brush or
Driving Wheels.
• Do not allow children to sit on the Jet Bot and do not place an object on
the Jet Bot.
• Leave over 3 cm space from the inner doorstep placed in the entrance.
Otherwise, the Jet Bot can ride on it and go outside.
English
10
VR8000_17ge_00857G-01_GE.indb 10 2022-05-10 오후 1:19:14
PREPARATION
Cleaning and maintenance
WARNING
• When the power cord is damaged, contact a service center to get it
replaced by a certied repairman.
– There is a risk of re or electric shock.
• Please check with a SAMSUNG Electronics service center when replacing
batteries.
– Using batteries from other products can cause malfunction.
• Be careful not to put your nger into the revolving LiDAR sensor.
Otherwise, your nger may get injured.
CAUTION
• Prevent any damage to the Jet Bot by complying with the following.
– Do not clean the Jet Bot by spraying water directly onto it or use a
volatile substance such as benzene, thinner, or alcohol to clean it.
• Do not disassemble or repair the Jet Bot. This should only be done by a
certied repairman.
• Always keep the Obstacle Sensor Window and the Cliff Sensor Window
clear.
– If foreign matter accumulates, sensors may malfunction.
• Do not store the Jet Bot in a car.
• Be careful that the LiDAR sensor is not exposed to a direct light such as
sun light, infrared light, etc.
– The direct light can affect the performance of the LiDAR sensor.
• When carrying the Jet Bot, be careful not to let it drop.
– The impact from the drop can affect the operation or performance of the
LiDAR sensor.
• Do not look at the transmitting part (a laser) of the revolving LiDAR
sensor horizontally.
• Be careful not to insert a tool such as a chopstick into the revolving LiDAR
sensor. Otherwise, the LiDAR sensor may work abnormally or malfunction.
English
11
VR8000_17ge_00857G-01_GE.indb 11 2022-05-10 오후 1:19:15
PREPARATION
• Before cleaning, remove objects which are less than 9 cm height and are
lightly on the oor as the Jet Bot can push along them, or the objects can
be caught in the Jet Bot’s Side Brush or Driving Wheels. (Fixed objects
can be detected by the Jet Bot when its bumper is pressed and will avoid
them.)
• If oil such as cooking oil is on the oor, the Jet Bot may become stationary
because the oor is slippery. Remove the oil rst before cleaning with the
Jet Bot.
English
12
VR8000_17ge_00857G-01_GE.indb 12 2022-05-10 오후 1:19:15
INSTALLATION
INSTALLATION
Installing a Docking Station
Approximately
0.5 m
Approximately
0.5 m
Approximately
1m
1 Connect the provided Battery Charger jack
to the rear of the Docking Station.
2 Position the Battery Charger cord into the
xing groove at the rear of the Docking
Station.
3 Connect the power cord to the Battery
Charger.
4 Place the Docking Station on an even oor
and near an electrical outlet and plug it in.
NOTE
• Install the Docking Station in a place where the oor and wall are level.
• If the Battery Charger cord is too long for the installation environment, coil the power cord
around the cable management post, then put it in the xing groove at the rear of the Docking
Station.
English
13
VR8000_17ge_00857G-01_GE.indb 13 2022-05-10 오후 1:19:16
OPERATION
Charging the Jet Bot
Before using the Jet Bot for the rst time, charge it completely. (For the charging time and
cleaning time, refer to the ‘Product specication’.)
1 Open the upper cover of the Jet Bot and
remove the white gasket.
OFF ON
2 Remove the yellow gasket attached to the
power switch at the side of the Jet Bot and
press the power switch to turn the Jet Bot
on.
– During booting, the Jet Bot’s Status
Indicator turns on with a melody which
stops when the booting is complete.
– When you turn the Jet Bot on for the
rst time after purchase, check the
SmartThings App connection(refer to
p.27-31) and installation of the Docking
Station following the voice guide of the
Jet Bot.
3 Place the Jet Bot on the Docking Station
manually to start charging.
– Make sure the charging terminals on
the Jet Bot and the Docking Station are
aligned.
Status
Indicator
4 Check the charging status.
– When charging starts, the Status
Indicator of the Jet Bot turns on (red,
orange, or yellow depending on charging
progress), it rises gradually, and changes
to green when the charging is complete.
OPERATION
English
14
VR8000_17ge_00857G-01_GE.indb 14 2022-05-10 오후 1:19:17
OPERATION
Auto charging
The Jet Bot automatically returns to the
Docking Station when it completes cleaning or
when the battery is low to recharge.
Docking (Recharging)
You can return the Jet Bot to the Docking
Station while cleaning to recharge.
• Press the [ ] on the Jet Bot or use the
SmartThings App to select the recharging
function.
If the Jet Bot fails to return to the Docking
Station for charging, it turns to the Sleep
Mode. To cancel the Sleep Mode, press the
[ ].
Discharged Jet Bot
Move the Jet Bot manually onto the Docking
Station to recharge.
English
15
VR8000_17ge_00857G-01_GE.indb 15 2022-05-10 오후 1:19:19
OPERATION
Checking if the docking (recharging) does not work
Check the Docking Station’s installation
status.
• Check whether the Docking Station has
been installed in a place where the Docking
Station cannot guide the Jet Bot to return.
• Check whether the distance between the
Docking Station and the Jet Bot is over
5m.
– It may take a longer time for the Jet Bot
to return to the Docking Station.
Charge the Jet Bot manually for the following
conditions.
• When the Docking Station is installed in a
corner
• When the battery is completely discharged
• When the Jet Bot is stuck in an obstacle
(e.g., furniture)
• When the Jet Bot cannot climb a threshold
near the Docking Station. (It should be less
than 1.5 cm.)
• When the Jet Bot’s Status Indicator turns
red and stays red with the Jet Bot not
working
NOTE
• If the power switch of the Jet Bot is off, the Jet Bot will not charge even if it is docked on the
Docking Station.
– Keep the Docking Station on at all times.
– If power is not supplied to the Docking Station, the Jet Bot cannot nd the Docking Station
and cannot automatically recharge.
• If the Jet Bot is left detached from the Docking Station, the battery drains naturally.
English
16
VR8000_17ge_00857G-01_GE.indb 16 2022-05-10 오후 1:19:19
OPERATION
Using the Jet Bot
Before using the Jet Bot, press the power switch at the side of the Jet Bot to turn the Jet Bot
on.
For the normal use of the Jet Bot’s functions, the SmartThings connection is required.
– For downloading and installing the SmartThings App, refer to the ‘SmartThings App (P.27-
31)’.
Basic use
OFF ON
Power on / off
Press the power switch at the side of the Jet
Bot to turn the Jet Bot on.
• During booting, the Jet Bot’s Status
Indicator turns on with a melody which
stops when the booting is complete.
Starting cleaning
Press the [ ] on the Jet Bot to start
cleaning in Auto Clean.
Stopping cleaning
• Press the [ ] on the Jet Bot to stop
operation while cleaning.
– When pressing the [ ], the Jet Bot
returns to the Docking Station and starts
charging.
If the Jet Bot does not operate for
20 minutes after it stops operation, it
automatically returns to the Docking
Station to recharge.
Sleep Mode
• When the Jet Bot is not in operation, press
and hold the [ ] to set the Sleep Mode.
• In the Sleep Mode, press the [ ] to cancel
the Sleep Mode.
OPERATION
English
17
VR8000_17ge_00857G-01_GE.indb 17 2022-05-10 오후 1:19:20
OPERATION
Operation status on the LED Status Indicator
Classication Color Meaning
Jet Bot
While
operating Red
Blinking without
moving An error occurs.
Blinking while
moving
Auto returning to the Docking
Station due to low battery
On Operating stops due to low
battery
While
charging
Red, orange, or yellow (depending
on charging progress) While charging
Green Charging is complete.
Violet Software is being updated.
You can set the Cleaning Mode and the Cleaning Functions at the SmartThings App.
During initial charging status, the Status Indicator turns red and slowly blinks for about
20minutes.
English
18
VR8000_17ge_00857G-01_GE.indb 18 2022-05-10 오후 1:19:21
/