BKAV S500-0233 Ultra Zoom Speed Dome AI Based Camera Užívateľská príručka

Qualcomm products contained here in are products of Qualcomm Technologies, Inc. and/or its subsidiaries.

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.

The Made with Qualcomm Technologies logo is a trademark of Qualcomm Incorporated.

Ultra zoom Speed Dome

AI-based Camera

Model: S500-0233

INSTALLATION GUIDE

PRODUCT KIT

3

Installation guide Thank you letter Drilling position decal

Wall BracketCamera

4

PRODUCT KIT

Set 4 of screws

and anchors

Hex tool

size 3, 5

Safety cable

5

TECHNICAL SPECIFICATION

Protection standards IP66, IK10

Resolution, frame rate FHD 1920x1080, Max 60fps

Digital zoom 4x

Optical zoom 33x

Focal length 4.5 - 148.5mm

Field of view (horizontal-vertical) Near: 60.1° - 36.2° / Far: 2.28° - 1.29°

Operating temperature

Dimentions (L x W x H) L380 x W290 x H450mm

4.67kgWeight

-40°C - 60°C (-40°F - 140°F)

Humidity 10 - 100%

Micro SD card External, up to 256GB

Power

Power consumption

Max 35W

Max 37W (with PTZ)

AC24V 5%

6

PRODUCT OVERVIEW

Camera body

Camera lens

Infrared LED

24VAC power supply

Audio in

Audio out

Ethernet interface

Wall bracket

Safety cable

INSTALLATION GUIDE

Step 1: Fix the camera on the bracket and tighten the screws it in the place (Figure 1).

Step 2: Assemble safety cable into the bracket (Figure 2).

7

21

8

INSTALLATION GUIDE

3

Drilling position decal

Step 3: Apply positions decal and drill 4 anchors to the wall. Fix the camera onto the wall with the screw (Figure 3).

CONNECTING THE SIGNAL WIRE

Connect network signal and 24VAC power supply.

Network cable Ethernet interface

24VAC power supply Black wire

Red wire

Audio out

Audio in

9

CAMERA FIELD OF VIEW

95°

360°

10

ATTENTION

11

During a power outage, the camera will be down as shown in the image above.

When power is on, the camera will return to its previous position.

Note:

12

THE MEMORY CARD AND RESET INSTALLATION

Power off the camera, press and hold the factory reset button. Continue to hold the factory reset button

for another 10 seconds while powering the camera, the camera will be restored to factory settings.

If resetting with the factory reset button is difﬁcult to operate, we recommend resetting via WebUI.

Note:

Reset installation: Open the protective cover that protects the camera against dust and water to reset the device.

Memory card: Open the protective cover, you can ﬁnd the location of Micro SD card.

Micro SD card

Reset factory

13

ACCESSING THE CAMERA

Password setting

The IP address of camera is set to DHCP mode by default. For the camera enables the DHCP by default,

you need to use the AI View Scanner App to scan IP.

Note: To complete the installation steps for the camera, refer to the User Manual.

The system will ask you to reset the password on your initial access.

When the "Administrator password change" window appears, enter a new password.

For passwords using eight or nine characters, you need to use at least three of the following types of

characters: uppercase and lowercase letters, numbers, and special characters.

For passwords using 10 to 15 characters, you need to use at least two of the character types.

Special characters include: ~ ` ! @ # $ % ^ & * ( ) _ - = + | { } [ ] . ? /

User name

Password

Administrator password change

New password

Conﬁrm new password

For a new password with 8 to 9 digits, you must use at least 3 of the following:

uppercase/lowercase letters, numbers and special characters. For a password with 10 to 15

digits, you must use at least 2 types of those mentioned.

For higher security, you are not recommended to repeat the same characters or consecutive

keyboard inputs for your passwords.

If you lost your password, you can press the [RESET] button to initialize the product. So, don’t

lose your password by using a memo pad or memorizing it.

Special characters that are allowed: ~`!@#$%^*()_-+=|{}[].?/

For additional security, please do not repeat any characters in your password.

If you forget your password, you can hold the [RESET] button to return the product to its

factory settings.

Note:

Login screen

When accessing the camera, a login window will appear.

Enter your user name and password to access the camera.

1. Enter "admin" in the <User name> box.

2. Enter your chosen password in <Password> box.

3. Click

SOFTWARE INSTALLATION

User name

Password

14

SAFETY INFORMATION

Be sure to follow this advice to ensure the device works properly.

Installation instruction: Concrete, brick, column, wood... are all suitable. Make sure the wall is strong enough.

The torque forces of screws securing IP enclosure: 1.3 – 1.4Nm.

It is recommended to use shielded network cables (STP) during set-up.

It is recommended to use CAT5e or higher network cables.

Store the camera in a cool and dry environment.

Shield the camera from potential impact from heavy objects.

Do not install the camera on unstable pillars, brackets, surfaces, or walls.

Do not use chemicals or detergents to clean the camera or housing.

To clean, use a damp cloth.

Only use standard tools and accessories when installing the camera equipment. The manufacturer

recommends using the manufacturer's power supply equipment or a corresponding source for the

camera. Improper installation may cause damage to the product.

Contact Bkav's customer support or authorized Bkav agents if you experience any problems.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-

ant to part 15 of the FCC rules. These limit are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

a accordance with the instruction manual, may cause harmful interference to radio communications.

Operations of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Precautions

Use the original packaging, or equivalent, to avoid damaging the product during transportation.

Transportation:

15

16

For information about AI View product warranty and thereto related information, go to aiview.ai/warranty.

WARRANTY INFORMATION

Model: S500-0233

HƯỚNG DẪN LẮP ĐẶT

BỘ SẢN PHẨM ĐÓNG GÓI

18

Sách hướng dẫn lắp đặt Thư cảm ơn Decan định vị khoan

Gá đỡ camera Camera

19

BỘ SẢN PHẨM ĐÓNG GÓI

Bộ 4 vít và neo Bộ lục giác

Dây an toàn

20

THÔNG SỐ KỸ THUẬT

Tiêu chuẩn bảo vệ IP66, IK10

Độ phân giải, tốc độ khung hình FHD 1920 x 1080, Tối đa 60fps

Zoom số 4x

Zoom quang học 33x

Tiêu cự 4.5 - 148.5mm

Trường nhìn (ngang - dọc) Gần: 60.1° - 36.2° / Xa: 2.28° - 1.29°

Nhiệt độ hoạt động

Kích thước (D x R x C) D380 x R290 x C450mm

4.67kgKhối lượng

-40°C - 60°C (-40°F - 140°F)

Độ ẩm 10 - 100%

Thẻ micro SD Hỗ trợ cắm thẻ nhớ ngoài lên đến 256GB

Nguồn

Nguồn tiêu thụ Tối đa 35W

Tối đa 37W (Có điều khiển PTZ)

AC24V 5%

Stránka sa načítava...

BKAV S500-0233 Ultra Zoom Speed Dome AI Based Camera Užívateľská príručka

BKAV S500-0233 Ultra Zoom Speed Dome AI Based Camera Užívateľská príručka

v iných jazykoch

Ostatné dokumenty