WalkingPad WPS1F Walking Device Používateľská príručka

KingSmith WalkingPad

Walking device

Model: WPS1F

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

2

English

3 – 21

Čeština

22 – 40

Slovenčina

41 – 59

Magyar

60 – 78

Deutsch

79 – 97

3

The product user guide contains product features, how to use, and the operating

procedure. Read the user manual carefully to get the best experience and avoid

unnecessary damage. Keep this manual for future reference. If you have any questions

or comments about the device, please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4

Important safety instructions

The appliance is intended for household.

DANGER – To reduce the risk of electric shock:

Always unplug this appliance from the electrical outlet immediately after using

and before cleaning.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1) An appliance should never be left unattended when plugged in. Unplug from outlet

when not in use, and before putting on or taking off parts.

2) Close supervision is necessary when this appliance is used by, on, or near children,

invalids, or disabled persons

3) Use this appliance only for its intended use as described in this manual. Do not use

attachments not recommended by the manufacturer.

4) Never operate this appliance if it has a damaged cord or plug, if it’s not working

properly, if it’s has been dropped or damaged, or dropped into water. Return the

appliance to a service centre for examination and repair.

5) Do not carry this appliance by supply cord or use cord as a handle.

6) Keep the cord away from heated surfaces.

7) Never drop or insert any object into any opening.

8) Do not use outdoors.

9) Do not operate where aerosol (spray) products are being used or where oxygen is

being administered.

10) To disconnect, turn all controls to the off position, then remove plug from outlet.

5

WARNING

1. This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory, or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved. Children shall not play

with the appliance. Cleaning and user maintenance shall not be made by children

without supervision.

2. Correct Disposal of this product. This marking indicates that this product should not

be disposed with other household wastes throughout the EU. To prevent possible

harm to the environment or human health from uncontrolled waste disposal, recycle

it responsibly to promote the sustainable reuse of material resources. To return your

used device, please use the return and collection systems or contact the retailer

where the product was purchased. They can take this product for environmentally

safe recycling.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory, or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

WARNING – always keep young children away from this machine. Contact with the

moving surface may result in severe friction burns.

6

Welcome to use!

Thanks for choosing KingSmith WalkingPad Walking device, and hereinafter referred to

as “a WalkingPad”, which possess various advantages including exquisite, foldable,

innovative integral design. From now on, enjoy the quality life of walking at home.

Performance & indicators

Detailed parameters

Expansion dimension

1445 × 518 × 125 mm

56.9” × 20.4” × 4.9”

Folding dimensions

825 × 518 × 136 mm

32.5” × 20.4” × 5.4”

Walking area

1200 × 400 mm

47” × 15.7”

Net weight

25 kg (55 lbs)

Maximum load

100 kg (240 lbs)

Applicable age

14 ~ 60 years old

Applicable height

Unlimited

Minimum speed

0.5 km/hr 0.5 mi/hr

Maximum speed

6 km/hr 3.7 mi/hr

Power input

735 W

Frequency

50/60 Hz

Rated voltage

220 - 240 V ~

Sport Mode

Standby mode / Manual mode /

Automatic mode

7

Product and accessories

Please check carefully if the items inside the packaging are complete and intact. In case

of any item missing or it’s broken, please contact the seller.

Accessories

Power cord

Remote

control

Remote control lanyard

Main product

Hex L Shaped

Wrench

Silicone oil

User Manual

8

Function schematic diagram

1. Product main body

Left side

Right side

2. Introduction of the function of the indicator panel

Walking Belt

Fold Hinge

Display Panel

Touch

Roller

Power Switch

Power Plug

Roller

Display Time

Display Speed

Display Distance

Display Calories

Display Steps

Manual Mode

Fault Warning Light

Automatic Mode

9

3. WalkingPad remote control

Start/stop

Lanyard

Acceleration

Deceleration

Mode Switch

Battery type

(1 * “CR2032“)

Battery cover

10

Guide for initial

1. Choose flat ground to place the WalkingPad. It is forbidden to place it on thick and soft

cushion. Please note: Don’t connect the power before the WalkingPad is fully unfolded.

2. Unfold the WalkingPad slowly and press it down to completely flat.

3. Check and adjust the walking belt to make sure it’s centered.

11

4. Connect the power cord and press the button to switch on.

5. Unlock all functions by following two ways, otherwise the speed

limit remains at 3 km/hr (1.9 mi/hr):

1) Walk 1 km (0.6 mi) on device first, reboot to unlock all functions.

2) Complete novice guide by “KS Fit” APP to unlock all functions.

6. Search “KS Fit” APP from Apple Store or Google Play and complete installation.

7. Open APP, follow the prompts to set

up the device.

8. Enter novice guide to unlock all

functions.

12

9. Start to use the Walking Pad.

10. If the belt deviates from the orbit in use,

please adjust properly. SEE: 06

Maintenance and service.

Learn to use WalkingPad

1. Mode instruction

Manual Mode

Light of the manual mode is on;

Control the speed through

the remote control or APP.

Automatic Mode

Light of the automatic mode is on;

Speed is automatically controlled by

intelligent algorithm. It follows

the speed of walking.

2. Instructions of the standby mode control

The motor and sensor stop responding in this mode to prevent nonusers from

accidentally triggering the WalkingPad.

Mode Switch

Short press: return to the previous mode

13

3. Instructions of manual mode control (primary mode)

Manual mode

In this mode, the speed of the WalkingPad can be controlled by the remote control. It

is recommended when beginners use the manual mode for first time and then use

the automatic mode after being skilled in using the WalkingPad. The manual mode

is controlled by remote control is used to start or stop the WalkingPad, which can

be modified in the client “Personalized”.

Mode Switch

Short press: switch to automatic mode

Long press: switch to standby mode

Acceleration

Short press: increase speed by 0.5 km/h (0.5 mi/h)

Start/stop

Short press: start or stop the WalkingPad

Deceleration

Short press: reduce speed by 0.5 km/h (0.5 mi/h)

In the manual mode,

set as the intelligent

start and stop, the

WalkingPad will start

automatically to the

target speed while

entering this area.

14

4. Description of automatic mode control (advance mode)

Automatic

This mode is a challenging and higher-class mode. User can walk on the

WalkingPad completely out of remote controller. We only recommend those who have

good sports skills or walking-device experience to take the challenge.

5. Remote controller notice

If the remote controller has no response or you change a new one, the remote

controller and walking device need re-establish communication.

Remote control pairing method:

Restart the WalkingPad, press and hold down the mode switch button on the remote

control immediately, hearing the sound of “Beep” indicates the success of pairing.

Note: During the operation, the remote control should be close to the LED display

panel of WalkingPad.

Entering this area,

the WalkingPad will

start or accelerate

under the

automatic mode.

Entering this area,

the WalkingPad will

slow down

automatically under

the automatic mode.

Mode Switch

Short press: switch to manual mode

Long press: switch to standby mode

15

6. Error warning light

Error Warning Light on the display panel is off when WalkingPad works well. When error

occurs, error warning light turns on and shows its error code.

E01:

Upper control receives lower

control data abnormally

E08

Motor overvoltage protection

E02:

Hall fault

E09

Motor phase loss protection

E03:

Software overcurrent protection

E10

Motor overload loss protection

E04:

Locked rotor protection

E20

Abnormal communication

E05:

The data received by the lower

control is abnormal

E21

Sensor failure

E06:

Hardware overcurrent protection

E07:

Motor undervoltage protection

Safety notice

Please keep a rear distance of

1000 mm or more.

Please keep a distance of 500 mm

or more for both sides.

16

Please use sport shoes.

Using on uneven ground is

prohibited.

Please do not stand up on the

walking machine when it is

under auto calibration

situation.

It is strictly forbidden to walk up

and down on WalkingPad while

walking. When emergency occurs,

please press the remote control

START/STOP and step away from

the WalkingPad from one side.

Anti-pinch.

Anti-involved, please do not

trample.

START/STOP

17

Do not bring pets when you are

using the Treadmill.

Do not use the Treadmill

backward or sideways.

Prohibition of vertical

placement.

Prohibition of lateral

placement.

Please keep your sight horizontal

to avoid dizziness.

Children should be supervised

to ensure that they do not play

with WalkingPad.

More than one person on the

WalkingPad is prohibited.

Walking sideways on the

machine is prohibited.

Horizon

18

Using machine with pet is

prohibited.

Walking backwards on the

machine is prohibited.

Trampling the machine head is

prohibited.

Please use this product

reasonably according to your

physical condition (the elderly

and pregnant women should

use it cautiously). If you feel

unwell, stop exercising

immediately. If necessary,

please seek medical attention.

19

Maintenance and adjustments

1. Clean the walking machine

• Turn off the machine and unplug the

power cord.

• Add several drops of detergent on cotton

rag or towel. Don’t pout the detergent on

the belt directly, and don’t use acid or

corrosive cleaners.

After using for a period, dust and stains

may appear on the back part, that is

normal situation, then just clean them up.

2. Adjust the belt

• Press and hold both mode switch button

and acceleration button on the remote

control over 3 seconds.

• Front panel shows “CALI”, and the speed is

4 km/hr (2.5 mi/hr).

• If belt deviates to the left: Turn the left

adjusting screw for a half-circle clockwise.

• If belt deviates to the right: Turn the right

adjusting screw for a half-circle clockwise.

• If belt is slipping: Turn both left and right

adjusting screw for a half-circle clockwise

at same time.

• Keep the machine running for 1-2 minutes

and check whether it needs to readjust.

3. Lubricate the belt

• Turn off the machine and unplug the

power cord.

• Lift the belt and apply silicone oil on the

backside of the belt.

• Turn on the machine again.

• Keep the machine running under 4 km/hr

(2.5 mi/hr) for 10-20 seconds.

• Only apply 5-10 ml lubricant oil each time,

too much lubricant oil makes the belt

become slipping.

• Apply for silicone oil once every 3 months.

20

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you

need repair or other services during the warranty period, contact the product seller

directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for

which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended

or failing to follow the instructions for maintenance, operation and service of the

product.

• Damage to the product by a natural disaster, the intervention of an unauthorized

person or mechanically through the fault of the buyer (e.g. during transport, cleaning

by inappropriate means, etc.).

• Natural wear and aging of consumables or components during use (such as

batteries, etc.).

• Exposure to adverse external influences, such as sunlight and other radiation or

electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,

electrostatic discharge voltage (including lightning), faulty supply or input voltage and

inappropriate polarity of this voltage, chemical processes such as used power

supplies, etc.

• If anyone has made modifications, modifications, alterations to the design or

adaptation to change or extend the functions of the product compared to the

purchased design or use of non-original components.

Stránka sa načítava ...

WalkingPad WPS1F Walking Device Používateľská príručka

WalkingPad WPS1F Walking Device Používateľská príručka

V iných jazykoch