Philco PLS 1061 Návod na obsluhu

Kategória
Práčky
Typ
Návod na obsluhu
Automatic Washing Machine
USER'S MANUAL
PLS 1061
Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user's manual.
EN - 1
02/2011
Copyright © 2011, Fast ČR, a. s.
CONTENTS
PART 1: BEFORE PUTTING INTO OPERATION ................................................................................................. 2
Important safety instructions .....................................................................................................................................................2
General safety information..........................................................................................................................................................2
• Recommendations .........................................................................................................................................................................3
PART 2: INSTALLATION .................................................................................................................................... 4
Removal of the transportation screws ....................................................................................................................................4
Levelling the washing machine .................................................................................................................................................5
• Electrical connection .....................................................................................................................................................................5
Water supply connection .............................................................................................................................................................5
Water drain connection ................................................................................................................................................................6
PART 3: CONTROL PANEL ................................................................................................................................ 7
• Start/Pause button .........................................................................................................................................................................7
Individual function indicator lights ..........................................................................................................................................8
• Function buttons ............................................................................................................................................................................8
• Temperature selector ....................................................................................................................................................................9
• Program selector .............................................................................................................................................................................9
PART 4: WASHING YOUR LAUNDRY .............................................................................................................. 10
First wash cycle .............................................................................................................................................................................10
Before actually washing ............................................................................................................................................................ 10
Operating the washing machine ........................................................................................................................................... 11
• Child lock ........................................................................................................................................................................................ 14
PART 5: MAINTENANCE AND CLEANING ...................................................................................................... 16
Water inlet  lters .......................................................................................................................................................................... 16
• Pump lter ...................................................................................................................................................................................... 16
• Detergent drawer ........................................................................................................................................................................17
Siphon plug .................................................................................................................................................................................. 18
Cabinet of the washing machine ........................................................................................................................................... 18
• Drum.................................................................................................................................................................................................18
Removal of scale deposits from the washing machine.................................................................................................. 18
PART 6: PRACTICAL INFORMATION .............................................................................................................. 19
PART 7: PREVENTION OF MINOR MALFUNCTIONS ..................................................................................... 20
PART 8: AUTOMATIC MALFUNCTION DETECTION SYSTEM ........................................................................ 23
PART 9: INTERNATIONAL WASHING SYMBOLS ............................................................................................ 25
PART 10: TECHNICAL SPECIFICATIONS ........................................................................................................ 26
PART 11: ENERGY SAVING TIPS ..................................................................................................................... 26
EN - 2
02/2011
Copyright © 2011, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Important safety instructions:
Read carefully and store for future use.
The safety of this appliance complies with industry norms and meets legal appliance safety requirements.
However, as manufacturers, we consider it our duty to provide you with the following safety instructions.
It is essential that you store this user's manual in a safe place so that you can use it in the future.
If you intend to sell the appliance, give it to another owner, or if you move, always make sure that the user's
manual is attached to the appliance, so that the new owner can  nd out about the operation of the appliance
and the relevant warnings.
Before installation or operation of the appliance you MUST carefully read all the safety instructions
and the user's manual.
Before putting the appliance into operation for the  rst time, check that it has not been damaged during
transport.
Never connect a damaged appliance. If some parts are damaged, contact the supplier.
If the washing machine is supplied in the winter months, when the temperature falls under 0°C, store the
appliance at room temperature for 24 hours before  rst use.
General safety instructions
Changing the technical parameters, or any making other modi cations to the appliance is dangerous.
During the course of the high temperature program the door heats up to a high temperature. Do not
touch the door!
Ensure that small household pets cannot get into the drum. It is therefore better to always check the inside
of the drum before use.
Items such as coins, safety pins, nails, bolts, stones and other heavy or sharp items can cause considerable
damage and do not belong in the appliance.
Use only the recommended amount of fabric softener and washing detergents. If you use a higher amount
than is recommended, the fabric could be damaged.
Always use the amount of detergent recommended by the manufacturer.
Small pieces of laundry such as socks, shoelaces, washing bands, etc. should be washed in a special
purpose washing bag or in a pillow case, because the individual items could become jammed between
the tube and the rotating drum.
Do not use the washing machine to wash products from metal skeletons, fabrics which are not hemmed
or that snag.
After use, before cleaning or maintenance always disconnect the washing machine from the power supply
and turn o the water inlet.
Never attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may lead to
injuries or serious damage to the appliance. Contact your local service centre for repairs. Always request
original spare parts.
Do not use multi-sockets or extension cords.
Do not plug in the appliance with a defective power cord.
If the power cord is damaged, have it replaced by the manufacturer or an authorised service technician to
prevent hazardous situations.
Do not pull the power plug out of the power socket by pulling on the cord. Hold the power cord by holding
the power plug directly.
Do not connect the power plug if you have wet hands.
EN - 3
02/2011
Copyright © 2011, Fast ČR, a. s.
Never touch the appliance if you have wet hands or feet.
Never open the detergent drawer while washing.
Never attempt to open the washing machine door while washing.
Because the washing machine can become very hot during operation, do not touch the hose during the
draining or  lling process.
In the case of any defect,  rst turn o the appliance, disconnect it from the power supply and shut o the
water inlet. Do not attempt to repair the device yourself. Contact the nearest authorised service.
Do not forget that the packaging material from the washing machine may present a danger to children.
Do not allow children to play with the washing machine.
Keep household pets at a safe distance from the washing machine.
The washing machine should only be used by persons fully instructed about the instructions, provisions
and controls described in this user's manual.
This washing machine is designed for domestic use only. The use of the washing machine for commercial
purposes voids the warranty.
Do not install the appliance on a carpet or another similar surface, which could block the ventilation
openings on the underside.
Do not place the drain hose into a container, bucket or sink.
Recommendation
Long term contact of washing detergents and fabric softeners with air will cause them to dry out and stick
to the walls of the drawer. To prevent this from happening,  ll the drawer with washing detergent and
fabric softener immediately before washing.
We recommend the use of the prewash only for heavily soiled laundry.
Do not exceed the maximum loading capacity of the drum.
This appliance must not be used by persons (including children) with physical, sensory or psychological
impairments or by inexperienced persons, unless properly trained or schooled in the safe use of the
appliance, or unless they have been properly supervised by a person who will be responsible for their
safety. Children should be supervised so as not to play with the appliance.
If you will not be using the washing machine for an extended period of time, pull it out of the power
socket, shut o the water inlet and leave the door open so that the inside of the washing machine can dry
out and so unpleasant odours are not created.
As a result of quality control procedures some water may remain in the washing machine. This will not
damage the washing machine in any way.
We recommend that the  rst wash is performed using the White 90 - 95°C program (depending on the
model) without any laundry, put 1/2 a measuring cup of detergent into the second detergent compartment.
EN - 4
02/2011
Copyright © 2011, Fast ČR, a. s.
PART 2: INSTALLATION
Carefully read the entire user's manual before putting your washing machine into operation and store it in
a safe place for future reference.
Removal of the transportation screws
You must remove the transportation screws located in the back part of the washing machine before
putting it into operation.
Loosen the bolts using a correctly sized spanner, turning it anticlockwise. (PIC. 1)
Remove the bolts by pulling them out. (PIC. 2)
Insert plastic plugs found in the accessories pouch, into the transportation screw openings.
(PIC. 3)
Carefully store the transportation screws removed from the washing machine for future transport
purposes.
NOTE:
Defects caused by starting the washing machine with the transportation screws installed are not covered
by the warranty.
PIC. 1 PIC. 2 PIC. 3
EN - 5
02/2011
Copyright © 2011, Fast ČR, a. s.
Levelling the washing machine
Do not place the washing machine on carpets or similar surfaces.
To ensure quite and vibration free operation of your washing machine, you should place it on an even,
non-slip and  rm surface.
You can level the washing machine by adjusting the adjustable feet:
First loosen the plastic nut.
Adjust by screwing out the feet upwards or downwards.
After levelling the washing machine, re-tighten the plastic nut by screwing it upwards.
Never level the washing machine on an uneven surface by placing cardboard, wooden blocks, etc. under
the feet.
Electrical connection
Technical speci cations of your washing machine: 220-240 V ~ 50 Hz.
A special grounding plug is attached to the power cord of your washing machine. This plug must be fully
inserted into a grounded power socket (with 10 A). The electrical fuse or circuit breaker to which the
washing machine is connected should be rated at 10A. If you do not have such sockets and fuses in your
home, have them installed by a quali ed electrician.
Our company takes no responsibility for whatever damages caused by using the washing machine without
grounding.
Water supply connection
Depending on the functions of your washing machine the washing machine is equipped with either
a single water inlet (cold) or a double water inlet (cold/hot). The hose with the white end is intended for the
cold water inlet and the hose with the red end is intended for the hot water inlet (on washing machines
with a hot and cold water inlet).
So that water does not leak from the connection points, the hose kit also includes 1 seal (for washing
machines with a cold water inlet) or 2 seals (for washing machines with hot and cold water inlets). Install
these seals on the end of the water inlet hose connected to the tap.
Connect the hose with the white end to the water inlet valve with the white  lter and the hose with the red
end to the water inlet valve with the red  lter (the second mentioned option applies to washing machines
with a hot and cold water connection). Tighten the plastic connecting parts using your hand. A quali ed
plumber will provide a safer connection.
The water pressure of 0.1 - 1 MPa in your water tap will ensure a more e cient operation of your washing
machine (the pressure of 0.1 MPa equates to a  ow rate of more than 8 litres of water per minute from
a fully open tap).
After the connections are complete, check that the connections do leak, by fully opening the tap.
Check that the supply hoses are not bent, broken or cracked.
EN - 6
02/2011
Copyright © 2011, Fast ČR, a. s.
Connect the supply hose to a 3/4" threaded water tap.
If the washing machine has a dual water inlet (for hot and cold water), the temperature of the hot water
should not exceed 70 °C.
Hot water inlet (valve with a red  lter)
Cold water inlet (valve with a white  lter)
Water drain connection
Check that the supply hoses are not bent, twisted, cracked or excessively stretched.
The drain hose should be installed at a height of min. 60 cm and max. 100 cm above the ground.
The end of the drain hose may be inserted directly into the drain opening or to a special end  tting
attached to the drain of the wash basin.
Never attempt to extend the length of the drain hose by adding extra parts.
NOTE:
Do not place the drain hose into a container, bucket or sink.
EN - 7
02/2011
Copyright © 2011, Fast ČR, a. s.
PART 3: CONTROL PANEL
Control panel
1. Drawer for washing detergents 4. Washing machine control indicator light
2. Program selector 5. Start / pause button and cancel button
3. Temperature setting button 6. Function buttons
Individual function indicator lights
START/PAUSE Button
This button is intended for starting the selected program or to pause the program that is running.
ON indicator lights
When the Start / pause button is pressed or other function buttons the indicator light above the respective
button lights up and above the control panel, where it marks the part of the washing cycle. If any button's
indicator light lights up, it means that the respective program has been activated. The button's indicator light
goes o when the respective button or the Start / pause button is pressed, which mean that the respective
function has been deactivated.
NOTE:
The function indicator lights are also used for warning messages described in chapters 7 – 8.
1 2 3 4 5
6
EN - 8
02/2011
Copyright © 2011, Fast ČR, a. s.
Function buttons
Rinse hold
We recommend you use this function if you cannot immediately take the laundry out of the washing machine
after the end of the program. This will prevent it becoming crumpled. If you press this button, the water from
the last rinse will not be released. If you want to start the program from the point where it was interrupted,
press the Start/Pause button.
If you do not wish to spin your laundry or you wish it to be spun in a gentle manner, move the program
selector to the P position (o ). Turn the program selector to one of the draining or spinning programs, which
you desire and press the Start/pause button. If you selected the draining program, the washing machine will
drain the water. If you select the spinning program, the washing machine will activate the spinning and then
the program will end.
Extra rinse
Apart from the standard rinse you can set an additional rinse, which the washing machine performs using this
function in all washing programs.
Easy ironing
Using this function will ensure that after being washed the laundry will be less crumpled.
WARNING!
If you forgot to set the additional function and the washing machine has already started washing,
press the button of your desired additional function, if the indicator above the button lights up,
then your selected additional function has been activated. If the indicator above the button turns
on for a short time and then turns o , your selected additional function has not been activated.
NOTE:
Our products contain electronic cards and touch buttons. Activate functions by gently pressing the buttons.
Temperature selector
By turning the temperature selector you can set the temperatures of the washing program from 0 (cold wash)
to 90°C. When selecting the water temperature follow the international symbols on your clothes.
EN - 9
02/2011
Copyright © 2011, Fast ČR, a. s.
Program selector
Using the program selector, select a program, in which you wish to wash your laundry. The program selection
may be done by turning the program selector knob in both directions. When making settings, ensure that the
symbol on the program selector exactly matches your selected washing program. If you switch the program
selector to position P (o ), the washing machine will drain the water so as to complete (cancel) the program
cycle. After completing the draining operation the washing machine will switch to the stand-by mode. Now
you can select another program that you want to start.
A. WHITES/COTTON I. WOOL
B. WHITES/COTTON/PREWASH J. HAND WASH
C. COTON 60° K. SILK
D. COTON 40° L. RAPID WASH
E. SYNTHETICS
RINSING
F. SYNTHETICS/PREWASH
SPINNING
G. DELICATE LAUNDRY
DRAINING
H. MIX
EN - 10
02/2011
Copyright © 2011, Fast ČR, a. s.
PART 4: WASHING LAUNDRY
Connect the washing machine to the power socket.
Open the water tap.
First wash cycle
There may be some water left over inside the washing machine from the factory tests. We therefore recommend
to perform the  rst wash without laundry so as to drain this water; put half a measure of standard detergent
into compartment 2, which is used for washing detergents and select the program for cotton at 90 °C.
Before actually washing
Sorting laundry
Sort the laundry according to its type (cotton, synthetics, delicates, wool, etc.), washing temperature and
the level of dirtiness.
Never wash whites together with coloured laundry.
Because your new coloured laundry may release some of its colour, wash it separately.
Before placing the laundry into the washing machine check pockets for any forgotten items. In this way
you will prevent damaging your clothes and the washing machine.
Do up zips and buttons on the laundry.
From curtains and drapes remove the plastic or metal hooks or insert the into a wash bag and tie it up.
Turn clothing such as pants, knitted fabrics, T-shirts and singlets inside out.
Wash small items such as socks and handkerchiefs in a wash bag.
Washing Washing Washing Do not wash in
up to 90 ˚C up to 60 ˚C up to 30 ˚C a washing machine
Placing clothing inside the washing machine
Open the door of the washing machine.
Spread the laundry evenly inside the washing machine.
Insert one item at a time.
When closing the door, make sure that no laundry has been caught in the door.
Firmly close the washing machine door, otherwise the washing machine will not start.
Detergent dosage
The amount of detergent you use in the washing machine depends on the following criteria:
The consumption of detergent changes with the degree of dirtiness of the laundry. Do not use a prewash
for lightly soiled laundry and use a small amount of detergent in compartment 2 for washing detergents.
For excessively soiled laundry select a program with a prewash, put ¼ of a detergent measuring cup into
compartment 1 for washing detergents and put the remainder of the measuring cup into compartment 2.
Use washing detergents specially made for automatic washing machines. The dosage of the detergent is
shown on the packaging.
Increased water hardness necessitates the use of an increased amount of detergent in the wash.
PART 4
:
WA
S
HING LA
U
NDRY
EN - 11
02/2011
Copyright © 2011, Fast ČR, a. s.
Increases laundry amounts also necessitate the use of an increased amount of detergent in the wash.
Pour fabric softeners (conditioners) into the fabric softener compartment in the detergent drawer. Do
not go over the MAX mark. Otherwise the fabric softener will  ow out the siphon into the water used for
washing.
If the fabric softener is very thick then dilute it with water before placing it in the compartment. The thick
fabric softener could clog up your siphon and so prevent the fabric softener from entering the washing
machine.
You can use liquid detergents for all washing programs without a prewash. For this purpose install into the
second detergent compartment in the drawer a measuring cup and pour in the detergent according to the
mark shown on the measuring cup.
Operating the washing machine
Selecting programs and functions
Select programs and additional functions corresponding to your laundry according to the tables presented
on page 15.
Start/pause button
Press this button to start the selected program or to stop a currently running program.
As soon as your selected program starts, the indicator above the Start/Pause button will turn on.
If you want to pause the selected program, press the Start/Pause button once. The indicator light above the
button will start to  ash. Press the Start/Pause button again to resume from the place, where it was interrupted
when the Start/Pause button was pressed.
Starting a program
Set the program selector to the program you wish to start.
If the program you selected is a wash program, the wash indicator light will  ash.
If the program you selected is a rinsing/spinning program, the indicator light corresponding to the
selection will  ash.
EN - 12
02/2011
Copyright © 2011, Fast ČR, a. s.
Start the selected program by pressing the Start/pause button.
As soon as you start the program by pressing the Start/Pause button, the Start/Pause indicator light will
turn on indicating the start of the wash process.
Selecting additional functions
Set the program selector to the program you wish to start.
If the program you selected is a wash program, the wash indicator light will turn on.
If the program you selected is a rinsing/spinning program, the indicator light corresponding to the
selection will turn on.
Select an additional function:
Press the button of the function that you wish to select.
If the indicator light above the function button turns on, it means that you have selected the desired
function.
If the indicator light above the function button is  ashing, it means that for the program you selected it is
not possible to select this additional function.
EN - 13
02/2011
Copyright © 2011, Fast ČR, a. s.
Start the selected program by pressing the Start/pause button.
As soon as you start the program by pressing the Start/Pause button, the Start/Pause indicator light will
turn on indicating the start of the wash process.
Cancelling a program
If you want to stop a program that is running sooner:
Press the Start/Pause button and hold it down for 4 seconds.
The washing machine will perform the processes necessary for ending the program and then the program
will end.
The end of program indicator light will turn on.
Now you can select a di erent programme.
EN - 14
02/2011
Copyright © 2011, Fast ČR, a. s.
Ending a program
After the completion of a selected program the washing machine will automatically stop.
The end of program indicator light will turn on.
Turn the program selector by turning it to P (o ).
After the program ends the washing machine's door safety lock will automatically disengage after about
2 minutes. You can open the door by pulling on the door handle towards yourself and take the laundry out
of the washing machine.
After taking the laundry out of the washing machine, leave the door open so that the washing machine
can dry out.
Disconnect the washing machine from the power socket.
Shut o the water inlet.
WARNING!
If an electric power outage occurs during the course of a washing program and then within a short
time power is restored, the program will continue from the place where it was interrupted. This
event will not damage the washing machine.
If the electric power outage occurs during the course of a washing program and lasts a longer time,
then the door safety lock will disengage after 2 minutes. If there remains water inside the washing
machine, do not open the door. The water could  ow out. If you need to take out the laundry, follow
the instructions described in part “Maintenance and cleaning” on page 16.
Child safety lock
Your washing machine is equipped with a child lock to prevent the changing the process of a program by
pressing a button during a wash. The child lock is activated by simultaneously pressing the  rst and second
function buttons and holding them down for at least 3 seconds.
If the wash, rinse, and spinning indicator lights  ash for about 2 seconds it means that the child lock has
been activated. To deactivate this function it is necessary to hold down the same buttons for longer than
3 seconds. If you press any button while the child lock function is activated, the pressed button will not be active
and the wash, rinse and spinning indicator lights will  ash for 2 seconds. A soon as the function is cancelled, the
indicator lights will stop  ashing. When a program has ended, the child lock function is automatically deactivated.
EN - 15
02/2011
Copyright © 2011, Fast ČR, a. s.
Table 1
PROGRAM
The drawer
for washing
detergent
Max. dry
laundry ca-
pacity (kg)
TYPE OF LAUNDRY Explanation
PLS 1061
A-WHITES
COTTON
26
Dirty cotton and linen
laundry for boiling
Underwear, bed
linen, table cloths,
T-shirts, shirts, towels
B-WHITES COTTON
(PREWASH)
1+2 6
Heavily soiled coloured
cotton and linen laundry
C- COTON 60° 2 6
Dirty coloured cotton
and linen laundry
D-COTON 40° 2 6
Lightly soiled coloured
cotton and linen laundry
leaking colour
E- SYNTHETICS 2 3
Dirty laundry from synthet-
ics or synthetic blends
Nylon stockings,
blouses
F- SYNTHETICS
(PREWASH)
1+2 3
Heavily soiled laundry from
synthetics or synthetic
blends
G- DELICATE LAUNDRY 2 3
Soiled laundry from syn-
thetics or synthetic blends
H-MIX 2 3
Lightly soiled coloured cot-
ton and linen laundry
T-Shirts, nylon socks,
shirts
I-WOOL 2 2
Soiled woollen laundry
intended for a hand wash
and a machine wash
All woollen laundry
J-HAND WASH 2 2
Very lightly soiled woollen
laundry intended for hand
washing and for machine
washing in cold water
K-SILK 2 2
Very lightly soiled woollen
laundry intended for hand
washing and for machine
washing in cold water
Silk laundry
L-RAPID WASH 2 2.5
Lightly soiled coloured cot-
ton and linen laundry
Underwear, bed
linen, table cloths,
T-shirts, shirts, towels
RINSE
If you need to rinse the washed laundry once more, you can use this program for
any type of laundry.
SPIN
You can use this program when you need to spin laundry that has been washed
one more time. Do not use it for delicate laundry or woollen laundry.
DRAIN
This program is intended for draining dirty water from the washing machine after
the laundry has been washed. If you wish to drain the water out of the washing
machine before the completion of a program, you may use this program.
(max.3 kg)
Program duration, energy consumption and water consumption val ues may vary according to wash
load weight and type, selected extra functions, tap water and ambient temperature
EN - 16
02/2011
Copyright © 2011, Fast ČR, a. s.
PART 5: MAINTENANCE AND CLEANING
Disconnect the washing machine from the power socket.
Shut o the water inlet.
The water inlet  lters
There are  lters connected to the hose ends at the tap end and at the end of the inlet valves, which prevent dirt
and foreign materials contained in water entering the washing machine. If the washing machine is not  lling
up with a su cient amount of water despite the water inlet being open, clean these  lters.
Disconnect the supply hose.
Using tweezers take the  lters out of the inlet valves and wash them with a brush.
Using your hand take out the  lters on the supply hoses at the end connected to the tap together with the
seals and clean them.
After cleaning the  lters put them back in the same way.
Attention:
The water inlet valves may be blocked by a contaminated water supply or because of inadequate
necessary maintenance, or the valves may be damaged, which may cause a water to constantly
ow through. For these reasons such types of malfunctions are not covered by the warranty.
The pump  lter
The pump  ltration system extends the life of the pump, which is used for draining dirty water. It ensures that
lint from the laundry does not enter the pump. We recommend you clean the pump  lter every 2-3 months.
Clean the pump  lter as follows:
Open the cover on the kickplate.
Before opening the  lter cover, place a container in front of it, into which the water remaining in the
washing machine will  ow.
Loosen the  lter cover by turning it anticlockwise and drain the water.
Remove all foreign material from the  lter.
Check by hand that the pump rotates.
EN - 17
02/2011
Copyright © 2011, Fast ČR, a. s.
After cleaning the pump, return the  lter by turning it clockwise.
Reattach the kickplate cover.
Don't forget that if you do not attach it correctly, water will leak from your washing machine.
WARNING!
Danger of scalding!
Because the water in the pump may be very hot, wait until it has cooled down.
The drawer for washing detergents
Over time washing detergent deposits may accumulate in the drawer and in the washing machine opening.
Therefore, the washing detergent drawer needs to be regularly cleaned from accumulated deposits. Take the
drawer out as follows:
Pull the drawer out completely (PIC. 1).
Fully press down the lid of the siphon inside the drawer and pull the drawer until you pull it out (PIC. 2).
Wash with water and an old toothbrush.
Remove the deposits accumulated inside the drawer opening without them being allowed to enter the
washing machine.
Once the drawer is dry, insert it back into the washing machine in the reverse sequence here described.
PIC. 1 PIC. 2
EN - 18
02/2011
Copyright © 2011, Fast ČR, a. s.
Siphon plug
Take out the washing detergent drawer. Pull out the siphon plug and thoroughly clean o fabric softener
residue. Reinsert the cleaned siphon plug in its place. Check that it is properly inserted.
Siphon plug
The washing machine cabinet
Clean the washing machine from the outside using lukewarm water and a gentle cleaning agent, which will
not damage the surface coat of the washing machine cabinet. After rinsing with clean water, wipe the washing
machine with a soft and dry wiping cloth.
WARNING!
If you have installed the washing machine in a place where the ambient temperature falls below
0°C and you will not be using it, do the following:
Connect the washing machine to a power socket.
Close the water tap and disconnect the supply hose or hoses.
Insert the end of the drain hose and supply hose into a container on the ground.
Set to program selector to the drain program.
The program indicator light will turn on.
Start the program by pressing the Start/pause button.
After the program has  nished (the end indicator light will turn on) disconnect the washing
machine from the power socket.
After completing these steps the remaining water in the washing machine will be drained, which
will avoid the danger of it freezing inside the washing machine. If you wish to use the washing
machine again, ensure that the ambient temperature is above 0°C.
The Drum
Do not leave any metal items inside the washing machine, such as needles, clips or coins, etc. These items can
cause rusty stains to appear on the drum. If you wish to remove these stains, use a cleaning agent
not containing chloride and follow the instruct of the cleaning agent's manufacturer. Never use steel wool
used for dishes, or any other similar abrasive items to clean the rusty stains.
Removal of scale deposits from the washing machine
We recommend the use of a commonly available scale remover and to follow the instructions printed on the
packaging.
WARNING!
Scale removal mixes contain acids and may cause discolouration of your laundry and may have
a negative e ect on your washing machine.
1 / 1

Philco PLS 1061 Návod na obsluhu

Kategória
Práčky
Typ
Návod na obsluhu

V iných jazykoch