Makita DUR190U Používateľská príručka

DUR190U

DUR190L

DUR191U

DUR191L

EN Cordless Grass Trimmer INSTRUCTION MANUAL 11

PL Akumulatorowa wykaszarka

do trawy INSTRUKCJA OBSŁUGI 24

HU Vezeték nélküli fűkasza HASZNÁLATI KÉZIKÖNYV 38

SK Akumulátorový krovinorez NÁVOD NA OBSLUHU 52

CS Akumulátorový vyžínač NÁVOD K OBSLUZE 65

UK Акумуляторна

газонокосарка ІНСТРУКЦІЯ З

ЕКСПЛУАТАЦІЇ 78

RO Motocositoare pentru iarbă

fără cablu MANUAL DE INSTRUCŢIUNI 93

DE Akku-Rasentrimmer BETRIEBSANLEITUNG 107

Fig.1

Fig.2

12

1

2

3

4

5

11

10

9

8

Fig.3

2

1 2

3

45

DUR190U

DUR191U

DUR190L

DUR191L

6

14

12

7

8

9

10

11

13

15

14

13

15

16

12

10

9

8

7

6

Fig.4

1

2

3

Fig.5

1

2

Fig.6

3

2

1

Fig.7

1

2

Fig.8

1

2

Fig.9

2

1

3

Fig.10

3

2

1

Fig.11

1

2

3

Fig.12

1

2

3

Fig.13

1

2

Fig.14

4

1

Fig.15

2

1

3

Fig.16

1

Fig.17

1

2

3

Fig.18

1

2

3

Fig.19

1

2

3

4

56

7

Fig.20

1

Fig.21

5

1

24

3

Fig.22

1

2

3

4

5

Fig.23

1

2

3

4

5

Fig.24

1

2

Fig.25

12

3

Fig.26

1

2

3

Fig.27

1

2

Fig.28

6

12

Fig.29

1

2

Fig.30

1

Fig.31

1

2

Fig.32

1

2

Fig.33

1

2

Fig.34

1

Fig.35

1

Fig.36

7

Fig.37

Fig.38

1

Fig.39

8

3 m

80 mm

100 mm

Fig.40

9

Fig.41

1

2

Fig.42

10

11 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: DUR190U DUR190L DUR191U DUR191L

Type of handle Bike handle Loop handle Bike handle Loop handle

No load speed 3: 6,000 min-1

2: 5,100 min-1

1: 3,500 min-1

Overall length

(without cutting tool)

1,775 mm

Nylon cord diameter 2.0 - 2.4 mm

Applicable cutting tool and

cutting diameter

3-tooth blade

(P/N 191J34-5)

230 mm

4-tooth blade

(P/N 729025-2)

230 mm

Nylon cutting head

(P/N 126674-0)

300 mm

Plastic blade

(P/N 126642-3)

230 mm

Rated voltage D.C. 18 V

Net weight 3.1 - 3.4 kg 2.9 - 3.2 kg 3.4 - 3.7 kg 3.2 - 3.5 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

andchargersmaycauseinjuryand/orre.

Recommended battery adapter

Battery adapter PDC01

• The battery adapter(s) listed above may not be available depending on your region of residence.

• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.

12 ENGLISH

Noise

Model DUR190U

Cutting tool

Sound pressure level (LpA)

dB(A)

Sound power level (LWA)

dB(A)

Applicable

standard

LpA dB(A) Uncer-

tainty (K)

dB(A)

LWA dB(A) Uncer-

tainty (K)

dB(A)

4-tooth blade 77.0 3.9 91.6 2.4

ISO22868

(ISO11806-1)

Nylon cutting head 74.0 1.9 87.1 0.9

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 75.6 1.3 85.9 2.1

ISO22868

(ISO11806-1)/

EN50636-2-91

Model DUR190L

Cutting tool

Sound pressure level (LpA)

dB(A)

Sound power level (LWA)

dB(A)

Applicable

standard

LpA dB(A) Uncer-

tainty (K)

dB(A)

LWA dB(A) Uncer-

tainty (K)

dB(A)

4-tooth blade 77.0 3.9 91.6 2.4

ISO22868

(ISO11806-1)

Nylon cutting head 74.0 1.9 87.1 0.9

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 75.6 1.3 85.9 2.1

ISO22868

(ISO11806-1)/

EN50636-2-91

Model DUR191U

Cutting tool

Sound pressure level (LpA)

dB(A)

Sound power level (LWA)

dB(A)

Applicable

standard

LpA dB(A) Uncer-

tainty (K)

dB(A)

LWA dB(A) Uncer-

tainty (K)

dB(A)

4-tooth blade 77.0 3.9 91.6 2.4

ISO22868

(ISO11806-1)

Nylon cutting head 74.0 1.9 87.1 0.9

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 75.6 1.3 85.9 2.1

ISO22868

(ISO11806-1)/

EN50636-2-91

Model DUR191L

Cutting tool

Sound pressure level (LpA)

dB(A)

Sound power level (LWA)

dB(A)

Applicable

standard

LpA dB(A) Uncer-

tainty (K)

dB(A)

LWA dB(A) Uncer-

tainty (K)

dB(A)

4-tooth blade 77.0 3.9 91.6 2.4

ISO22868

(ISO11806-1)

Nylon cutting head 74.0 1.9 87.1 0.9

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 75.6 1.3 85.9 2.1

ISO22868

(ISO11806-1)/

EN50636-2-91

• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB

(A). Wear ear protection.

13 ENGLISH

NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

Vibration

Model DUR190U

Cutting tool Left hand Right hand Applicable

standard

ah,W (m/s2)

Uncertainty K

(m/s2)

ah,W (m/s2)

Uncertainty K

(m/s2)

4-tooth blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Nylon cutting head 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Model DUR190L

Cutting tool Left hand Right hand Applicable

standard

ah,W (m/s2)

Uncertainty K

(m/s2)

ah,W (m/s2)

Uncertainty K

(m/s2)

4-tooth blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Nylon cutting head 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Model DUR191U

Cutting tool Left hand Right hand Applicable

standard

ah,W (m/s2)

Uncertainty K

(m/s2)

ah,W (m/s2)

Uncertainty K

(m/s2)

4-tooth blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Nylon cutting head 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Model DUR191L

Cutting tool Left hand Right hand Applicable

standard

ah,W (m/s2)

Uncertainty K

(m/s2)

ah,W (m/s2)

Uncertainty K

(m/s2)

4-tooth blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Nylon cutting head 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

Plastic blade 2.5 1.5 2.5 1.5

ISO22867

(ISO11806-1)

NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.

14 ENGLISH

WARNING: The vibration emission during actual use of the power tool can dier from the declared

value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

Symbols

The followings show the symbols used for the equipment.

Be sure that you understand their meaning before use.

Take particular care and attention.

Read instruction manual.

15m(50FT)Keep distance at least 15 m.

Danger;beawareofthrownobjects.

Caution; kickback

Wear a helmet, goggles and ear protection.

Wear protective gloves.

Wear sturdy boots with nonslip soles.

Steeltoed safety boots are recommended.

Do not expose to moisture.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material! In observance of the European

Directives, on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Important safety instructions for the tool

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Intended use

1. This tool is only intended for cutting grass,

weeds, bushes and undergrowth. It should not

be used for any other purpose such as edging

or hedge cutting as this may cause injury.

General instructions

1. Never allow people unfamiliar with these

instructions, people (including children) with

reduced physical, sensory or mental capabil-

ities, or lack of experience and knowledge to

use the tool. Children should be supervised to

ensure that they do not play with the tool.

2.

Before starting the tool, read this instruction manual

to become familiar with the handling of the tool.

3. Do not lend the tool to a person with insu-

cient experience or knowledge regarding han-

dling of brushcutters and string trimmers.

4. When lending the tool, always attach this

instruction manual.

5.

Handle the tool with the utmost care and attention.

6. Never use the tool after consuming alcohol or

drugs, or if feeling tired or ill.

7. Never attempt to modify the tool.

8.

Follow the regulations about handling of brush-

cutters and string trimmers in your country.

Personal protective equipment

►Fig.1

1. Wear safety helmet, protective goggles and

protective gloves to protect yourself from

ying debris or falling objects.

2. Wear ear protection such as ear mus to pre-

vent hearing loss.

3.

Wear proper clothing and shoes for safe operation,

such as a work overall and sturdy, non-slip shoes.

Do not wear loose clothing or jewelry. Loose clothes,

jewelryorlonghaircanbecaughtinmovingparts.

15 ENGLISH

4. When touching the cutting blade, wear protec-

tive gloves. Cutting blades can cut bare hands

severely.

Work area safety

1. Operate the tool under good visibility and day-

light conditions only. Do not operate the tool in

darkness or fog.

2. Do not operate the tool in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. The tool creates sparks

which may ignite the dust or fumes.

3. During operation, never stand on an unstable

or slippery surface or a steep slope. During

the cold season, beware of ice and snow and

always ensure secure footing.

4. During operation, keep bystanders or animals

at least 15 m away from the tool. Stop the tool

as soon as someone approaches.

5. Never operate the tool while people, especially

children, or pets are nearby.

6. Before operation, examine the work area for

stones or other solid objects. They can be

thrown or cause dangerous kickback and result in

seriousinjuryand/orpropertydamage.

7. WARNING: Use of this product can create

dust containing chemicals which may cause

respiratory or other illnesses. Some examples

of these chemicals are compounds found in

pesticides, insecticides, fertilizers and herbi-

cides. Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemicals: work in a well ventilated area, and

work with approved safety equipment, such as

those dust masks that are specially designed

to lter out microscopic particles.

Electrical and battery safety

1. Do not expose the tool to rain or wet condi-

tions. Water entering the tool will increase the risk

of electric shock.

2.

Do not use the tool if the switch does not turn it

on and o. Any tool that cannot be controlled with

the switch is dangerous and must be repaired.

3.

Prevent unintentional starting. Ensure the switch

is in the o-position before installing a battery

pack, picking up or carrying the tool. Carrying the

toolwithyourngerontheswitchorenergisingthe

tool that have the switch on invites accidents.

4. Do not dispose of the battery(ies) in a re.

The cell may explode. Check with local codes for

possible special disposal instructions.

5.

Do not open or mutilate the battery(ies). Released

electrolyte is corrosive and may cause damage to the

eyes or skin. It may be toxic if swallowed.

6. Do not charge battery in rain, or in wet

locations.

Putting into operation

1. Before assembling or adjusting the tool,

remove the battery cartridge.

2. Before handling the cutter blade, wear protec-

tive gloves.

3.

Before installing the battery cartridge, inspect

the tool for damages, loose screws/nuts or

improper assembly. Sharpen blunt cutter blade.

If the cutter blade is bent or damaged, replace

it. Check all control levers and switches for

easy action. Clean and dry the handles.

4. Never attempt to switch on the tool if it is dam-

aged or not fully assembled. Otherwise serious

injurymayresult.

5. Adjust the shoulder harness and hand grip to

suit the operator's body size.

6. When inserting a battery cartridge, keep the

cutting attachment clear of your body and

other object, including the ground. It may rotate

whenstartingandmaycauseinjuryordamageto

the tool and/or property.

7. Remove any adjusting key, wrench or blade

cover before turning the tool on. An accessory

left attached to a rotating part of the tool may

resultinpersonalinjury.

8. The cutting tool has to be equipped with the

guard. Never run the tool with damaged guards

or without guards in place!

9. Make sure there are no electrical cables, water

pipes, gas pipes etc. that could cause a hazard

if damaged by use of the tool.

Operation

1. In the event of an emergency, switch o the

tool immediately.

2.

If you feel any unusual condition (e.g. noise,

vibration) during operation, switch o the tool

and remove the battery cartridge. Do not use the

tool until the cause is recognized and solved.

3. The cutting attachment continues to rotate for

a short period after turning the tool o. Don't

rush to contact the cutting attachment.

4. During operation, use the shoulder harness.

Keep the tool on your right side rmly.

5.

Do not overreach. Keep proper footing and balance

at all times. Watch for hidden obstacles such as

tree stumps, roots and ditches to avoid stumbling.

6. Always be sure of your footing on slopes.

7. Walk, never run.

8.

Never work on a ladder or tree to avoid loss of control.

9.

If the tool gets heavy impact or fall, check the

condition before continuing work. Check the

controls and safety devices for malfunction. If

there is any damage or doubt, ask our authorized

service center for the inspection and repair.

10. Take a rest to prevent loss of control caused

by fatigue. We recommend taking a 10 to 20-min-

ute rest every hour.

11. When you leave the tool, even if it is a short

time, always remove the battery cartridge. The

unattended tool with the battery cartridge installed

may be used by unauthorized person and cause

serious accident.

12. If grass or branches get caught between the

cutting attachment and guard, always turn

the tool o and remove the battery cartridge

before cleaning. Otherwise the cutting attach-

ment may rotate unintentionally and cause serious

injury.

16 ENGLISH

13. Never touch moving hazardous parts before

the moving hazardous parts have come to

a complete stop and the battery cartridge is

removed.

14. If the cutting attachment hits stones or other

hard objects, immediately turn the tool o.

Then remove the battery cartridge and inspect

the cutting attachment.

15. Check the cutting attachment frequently

during operation for cracks or damages.

Before the inspection, remove the battery

cartridge and wait until the cutting attachment

stops completely. Replace damaged cutting

attachment immediately, even if it has only

supercial cracks.

16. Never cut above waist height.

17. Before starting the cutting operation, wait until

the cutting attachment reaches a constant

speed after turning the tool on.

18. When using a cutting blade, swing the tool

evenly in half-circle from right to left, like

using a scythe.

19.

Hold the tool by insulated gripping surfaces

only, because the cutter blade may contact hid-

den wiring. Cutter blades contacting a "live" wire

may make exposed metal parts of the tool "live" and

could give the operator an electric shock.

20. Do not start the tool when the cutting tool is

tangled with cut grass.

21. Before starting the tool, be sure that the cut-

ting tool is not touching the ground and other

obstacles such as a tree.

22. During operation always hold the tool with

both hands. Never hold the tool with one hand

during use.

23. Do not operate the tool in bad weather or if

there is a risk of lightning.

Cutting tools

1. Do not use a cutting tool which is not recom-

mended by us.

2. Use an applicable cutting attachment for the

job in hand.

— Nylon cutting heads (string trimmer heads)

and plastic blades are suitable for trimming

lawn grass.

— Cutting blades are suitable for cutting weeds,

high grasses, bushes, shrubs, underwood,

thicket, and the like.

— Never use other blades including metal

multi-piecepivotingchainsandailblades.It

mayresultinseriousinjury.

3.

Only use the cutting tool that are marked with a speed

equal or higher than the speed marked on the tool.

4. Always keep your hands, face, and clothes

away from the cutting tool when it is rotating.

Failuretodosomaycausepersonalinjury.

5. Always use the cutting attachment guard prop-

erly suited for the cutting attachment used.

6. When using cutting blades, avoid kickback

and always prepare for an accidental kickback.

See the section for Kickback.

7. When not in use, attach the blade cover onto

the blade. Remove the cover before operation.

Kickback (Blade thrust)

1. Kickback (blade thrust) is a sudden reaction

to a caught or bound cutting blade. Once it

occurs, the tool is thrown sideway or toward

the operator at great force and it may cause

serious injury.

2. Kickback occurs particularly when applying

the blade segment between 12 and 2 o'clock

to solids, bushes and trees with 3 cm or larger

diameter.

►Fig.2

3. To avoid kickback:

1. Apply the segment between 8 and 11

o'clock.

2. Never apply the segment between 12 and

2 o'clock.

3.

Never apply the segment between 11 and 12

o'clock and between 2 and 5 o'clock, unless

the operator is well trained and experienced

and does it at his/her own risk.

4. Never use cutting blades close to solids,

such as fences, walls, tree trunks and

stones.

5. Never use cutting blades vertically, for

such operations as edging and trimming

hedges.

►Fig.3

Vibration

1. People with poor circulation who are exposed

to excessive vibration may experience injury

to blood vessels or the nervous system.

Vibration may cause the following symptoms

tooccurinthengers,handsorwrists:"Falling

asleep" (numbness), tingling, pain, stabbing sen-

sation, alteration of skin color or of the skin. If any

of these symptoms occur, see a physician!

2. To reduce the risk of "white nger disease",

keep your hands warm during operation and

well maintain the tool and accessories.

Transport

1. Before transporting the tool, turn it o and

remove the battery cartridge. Attach the cover

to the cutting blade.

2. When transporting the tool, carry it in a hori-

zontal position by holding the shaft.

3. When transporting the tool in a vehicle, prop-

erly secure it to avoid turnover. Otherwise

damage to the tool and other baggage may result.

Maintenance

1. Have your tool serviced by our authorized

service center, always using only genuine

replacement parts. Incorrect repair and poor

maintenance can shorten the life of the tool and

increase the risk of accidents.

2. Before doing any maintenance or repair work

or cleaning the tool, always turn it o and

remove the battery cartridge.

3. Always wear protective gloves when handling

the cutting blade.

17 ENGLISH

4. Always clean dust and dirt o the tool. Never

use gasoline, benzine, thinner, alcohol or the

like for the purpose. Discoloration, deformation

or cracks of the plastic components may result.

5. After each use, tighten all screws and nuts.

6. Do not attempt any maintenance or repair not

described in the instruction manual. Ask our

authorized service center for such work.

7.

Always use our genuine spare parts and acces-

sories only. Using parts or accessories supplied

by a third party may result in the tool breakdown,

propertydamageand/orseriousinjury.

8.

Request our authorized service center to inspect

and maintain the tool at regular interval.

9. Always keep the tool in good working condi-

tion. Poor maintenance can result in inferior per-

formance and shorten the life of the tool.

Storage

1. Before storing the tool, perform full cleaning

and maintenance. Remove the battery car-

tridge. Attach the cover to the cutting blade.

2. Store the tool in a dry and high or locked loca-

tion out of reach of children.

3. Do not prop the tool against something, such

as a wall. Otherwise it may fall suddenly and

causeaninjury.

First aid

1.

Always have a rst-aid kit close by. Immediately

replace any item taken from the rst aid kit.

2. When asking for help, give the following

information:

— Place of the accident

— What happened

— Numberofinjuredpersons

— Natureoftheinjury

— Your name

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.

Tapeormaskoopencontactsandpackupthe

battery in such a manner that it cannot move

around in the packaging.

11. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe

place. Follow your local regulations relating to

disposal of battery.

12. Use the batteries only with the products

specied by Makita. Installing the batteries to

non-compliantproductsmayresultinare,exces-

sive heat, explosion, or leak of electrolyte.

13. If the tool is not used for a long period of time,

the battery must be removed from the tool.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting

causingres,personalinjuryanddamage.Itwill

also void the Makita warranty for the Makita tool and

charger.

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

2. Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery

service life.

3. Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let

a hot battery cartridge cool down before

charging it.

4. Charge the battery cartridge if you do not use

it for a long period (more than six months).

18 ENGLISH

PARTS DESCRIPTION

►Fig.4

1Speed indicator 2ADT indicator

(ADT = Automatic Torque

Drive Technology)

3Caution lamp 4Main power button

5Reverse button 6Battery cartridge 7Lock-olever 8Switch trigger

9Hanger 10 Handle 11 Barrier(countryspecic) 12 Protector

13 Lock lever

(DUR191U and

DUR191L only)

14 Joint cover

(DUR191U and

DUR191L only)

15 Cap

(DUR191U and

DUR191L only)

16 Shoulder harness

FUNCTIONAL

DESCRIPTION

WARNING: Always be sure that the tool is

switched o and the battery cartridge is removed

before adjusting or checking function on the tool.

Failuretoswitchoandremovethebatterycartridge

mayresultinseriouspersonalinjuryfromaccidental

start-up.

Installing or removing battery

cartridge

CAUTION: Always switch o the tool before

installing or removing of the battery cartridge.

CAUTION: Hold the tool and the battery car-

tridge rmly when installing or removing battery

cartridge. Failure to hold the tool and the battery

cartridgermlymaycausethemtoslipoyourhands

and result in damage to the tool and battery cartridge

andapersonalinjury.

►Fig.5: 1. Red indicator 2. Button 3. Battery cartridge

To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator on the

upper side of the button, it is not locked completely.

CAUTION: Always install the battery cartridge

fully until the red indicator cannot be seen. If not,

itmayaccidentallyfalloutofthetool,causinginjuryto

you or someone around you.

CAUTION: Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

not being inserted correctly.

Tool / battery protection system

The tool is equipped with a tool/battery protection

system.Thissystemautomaticallycutsopowerto

the motor to extend tool and battery life. The tool will

automatically stop during operation if the tool is placed

under one of the following conditions:

Caution lamp Status

Color On Blinking

Red Overload

Red Overheat

Red Over

discharge

Overload protection

If the tool gets into one of the following situation, the tool auto-

matically stops and the caution lamp starts blinking in red:

— The tool is overloaded by entangled weeds or

other debris.

— The cutting tool is locked or kicked back.

— The main power button is turned on while the

switch trigger is being pulled.

In this situation, release the switch trigger and remove

entangled weeds or debris if necessary. After that, pull

the switch trigger again to resume.

CAUTION: If you need to remove the entan-

gled weeds on the tool or release the locked

cutting tool, be sure to turn the tool o before you

start.

Overheat protection for tool or battery

If the tool or battery cartridge is overheated, the tool

stops automatically. When the tool or battery cartridge is

overheated,thespeedindicatorandADTindicatorgoo

and the caution lamp lights up in red. Let the tool and/or

battery cool down before turning the tool on again.

Overdischarge protection

When the battery capacity becomes low, the tool stops

automatically. The speed indicator and ADT indicator go

oandthecautionlampstartsblinkinginred.

If the tool does not operate even when the switches are

operated, remove the battery cartridge from the tool and

charge it.

19 ENGLISH

Indicating the remaining battery capacity

Only for battery cartridges with the indicator

►Fig.6: 1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps

light up for a few seconds.

Indicator lamps Remaining

capacity

Lighted O Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery

may have

malfunctioned.

NOTE: Depending on the conditions of use and the

ambienttemperature,theindicationmaydierslightly

from the actual capacity.

Main power switch

Tap the main power button to turn on the tool.

Toturnothetool,pressandholdthemainpower

buttonuntilthespeedindicatorgoeso.

►Fig.7: 1. Speed indicator 2. Main power button

NOTE:Thetoolwillautomaticallyturnedoifitisleft

without any operations for a certain period of time.

Switch action

WARNING:

Before installing the battery cartridge

on the tool, always check to see that the switch trigger

actuates properly and returns to the "OFF" position when

released. Operating a tool with a switch that does not actuate

properlycanleadtolossofcontrolandseriouspersonalinjury.

CAUTION: Never put your nger on the

switch when carrying. The tool may start uninten-

tionallyandcauseinjury.

To prevent the switch trigger from being accidentally

pulled,alock-oleverisprovided.

Tostartthetool,graspthehandle(thelock-oleveris

released by the grasp) and then pull the switch trigger.

To stop the tool, release the switch trigger.

DUR190U and DUR191U

►Fig.8: 1.Lock-olever2. Switch trigger

DUR190L and DUR191L

►Fig.9: 1.Lock-olever2. Switch trigger

NOTE:Thetoolisautomaticallyturnedoafterthe

tool is left for a certain period without any operations.

Speed adjusting

You can select the tool speed by tapping the main

power button. Each time you tap the main power button,

the level of speed will change.

►Fig.10: 1. Speed indicator 2. Main power button

3. ADT indicator

Speed indicator Mode Rotation speed

ADT 3,500 - 6,000 min-1

High 6,000 min-1

Medium 5,100 min-1

Low 3,500 min-1

NOTE: When you set ADT (Automatic Torque Drive

Technology), ADT indicator turns on and the tool runs

at optimum rotation speed and torque for the condi-

tion of grass being cut.

Reverse button for debris removal

WARNING: Switch o the tool and remove

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation

function can not remove.Failuretoswitchoand

remove the battery cartridge may result in serious

personalinjuryfromaccidentalstart-up.

This tool has a reverse button to change the direction of

rotation. It is only for removing weeds and debris entan-

gled in the tool.

To reverse the rotation, tap the reverse button and pull

theswitchtriggerwhiledepressingthelock-oleverwhen

the cutting tool is stopped. The speed indicators and

ADT indicator start blinking, and the cutting tool rotates in

reverse direction when you pull the switch trigger.

To return to regular rotation, release the trigger and wait

until the cutting tool stops.

►Fig.11: 1. Speed indicator 2. ADT indicator

3. Reverse button

NOTE: During the reverse rotation, the tool operates

only for a short period of time and then automatically

stops.

NOTE: Once the tool is stopped, the rotation returns

to regular direction when you start the tool again.

NOTE: If you tap the reverse button while the cutting

tool is still rotating, the tool comes to stop and to be

ready for reverse rotation.

20 ENGLISH

Electric brake

This tool is equipped with an electric brake. If the tool

consistently fails to quickly stop after the switch trigger

is released, have the tool serviced at our service center.

CAUTION: This brake system is not a substi-

tute for the protector. Never use the tool without

the protector. An unguarded cutting tool may result

inseriouspersonalinjury.

ASSEMBLY

WARNING: Always be sure that the tool is

switched o and battery cartridge is removed

before carrying out any work on the tool. Failure to

switchoandremovethebatterycartridgemayresult

inseriouspersonalinjuryfromaccidentalstart-up.

WARNING: Never start the tool unless it is

completely assembled. Operation of the tool in a

partially assembled state may result in serious per-

sonalinjuryfromaccidentalstart-up.

Installing the handle

For DUR190U and DUR191U only

1. Insert the shaft of the handle into the grip. Align

the screw hole in the grip with the one in the shaft.

Tighten the screw securely.

►Fig.12: 1. Grip 2. Screw 3. Handle

2.

Place handle between handle clamp and handle holder.

Adjustthehandletoananglethatprovidesacomfortable

working position and then secure with hex socket head bolts.

►Fig.13: 1. Hex socket head bolt 2. Handle clamp

3. Handle holder

Attaching the barrier

For DUR190L and DUR191L (country specic)

If the barrier is included in your model, attach it to the

handle using the screw on the barrier.

►Fig.14: 1. Barrier 2. Screw

CAUTION: After assembling the barrier, do

not remove it. The barrier works as a safety part

to prevent you from contacting the cutting blade

accidentally.

Mounting the attachment pipe

For DUR191U and DUR191L only

Mount the attachment pipe to the power unit.

1. Turn the lever to the direction of the arrow shown

inthegure.

►Fig.15: 1. Lever

2. Pullupthejointcoverandinserttheattachment

pipe while aligning the protrusion on the pipe (cutting

toolside)withtheconcaveportionofthejointpart.

►Fig.16: 1. Lock lever 2. Joint cover 3. Pipe

Make sure that the surface of the lock lever is parallel

to the pipe.

3. Turn the lever to the direction of the arrow shown

inthegure.

►Fig.17: 1. Lever

To remove the pipe, turn the lever to the direction of the

arrowshowninthegureandpullthepipeoutwhile

pressing down the lock lever.

►Fig.18: 1. Lever 2. Lock lever 3. Pipe

Installing the protector

WARNING: Never use the tool without the

guard illustrated in place. Failure to do so can

causeseriouspersonalinjury.

CAUTION: Take care not to injure yourself on

the cutter for cutting the nylon cord.

Attach the protector to the clamp using bolts.

►Fig.19: 1. Clamp 2. Protector 3. Cutter

Installing the cutting tool

NOTE: The type of the cutting tool(s) supplied as

the standard accessory varies depending on the

countries. The cutting tool is not included in some

countries.

NOTE: Turn the tool upside down so that you can

replace the cutting tool easily.

Cutter blade

CAUTION: When handling a cutter blade,

always wear gloves and put the blade cover on

the blade.

CAUTION: The cutter blade must be well pol-

ished, and free of cracks or breakage. If the cutter

blade hits a stone during operation, stop the tool and

check the cutter blade immediately.

CAUTION: Always use the cutter blade

with the diameter described in the section for

specications.

►Fig.20: 1. Nut 2. Cup 3. Clamp washer 4. Cutter

blade 5. Spindle 6. Guard 7. Spindle lock

button

1. Mount the cutter blade onto the guard so that the

arrows on the cutter blade and protector are pointing in

the same direction.

►Fig.21: 1. Arrow

2. Put the clamp washer and cup onto the cutter

blade.

3. While holding down the spindle lock button,

tighten the nut securely by the box wrench.

►Fig.22: 1. Spindle lock button 2. Box wrench

3. Loosen 4. Tighten

To remove the cutting blade, loosen the nut while hold-

ing down the spindle lock button.

Stránka sa načítava ...

Makita DUR190U Používateľská príručka

Makita DUR190U Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty