Changhong Electric LED40D2080ST2 Návod na používanie

Značka: Changhong Electric

Model: LED40D2080ST2

Typ: Návod na používanie

Model:LED40D2080ST2

1、 Safety and warnings........................................................................................................ 2-3

2、 Introduction..................................................................................................................... 4

3、 Installation...................................................................................................................... 5-9

4、 Remote Controller......................................................................................................... 10-11

5、 TV Operation.................................................................................................................. 12-20

6、 Trouble Shooting............................................................................................................. 21

Contents

1 UK

IMPORTANT SAFETY INSTRUCTION

The symbol indicates that dangerous voltages

constituting a risk of electric shock are present

within this unit.

The symbol indicates that there are important

operating and maintenance instructions in the

literaturaccompanying this unit.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install in

accordance with the instructions.

8) Do not install near any heat sources such as radiations,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized plug.

If the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10) Protected the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Unplug this apparatus during lighting storms or

when unused for long periods of time.

13) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been

dropped.

14) Mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

15) The ventilation should not be impeded by covering

the ventilation openings with items, such as newspapers,

table-cloth, curtains, etc.

16) No naked flame sources, such as lighted candles,

should be placed on the apparatus.

17) Attention should be drawn to the environmental

aspects of battery disposal.

18) The use of apparatus in moderate climate.

19) The apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids, such as

vases, shall be placed on the apparatus.

20) To avoid any injury caused by lean of the product,

please always ensure the whole product was placed

within the table surface in horizontal.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user accessible

parts. When servicing use only

identical replacement parts.

This marking indicates that this product should not

be disposed with other household wastes

throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled

waste disposal, recycle it responsibly to promote

the sustainable reuse of material resources. To

return your used device, please use the return and

collection systems or contact the retailer where the

product was purchased. They can take this product

for environmental safe recycling.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK).NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

WARNING:

The batteries shall not be exposed to excessive

heat such as sunshine, fire or the like.

WARNING:

The excessive sound pressure from earphones and

headphones can cause hearing loss.

WARNING:

SAFETY AND WARNINGS UK

UK 2

High voltages are used in the operation of this television

receiver. Do not remove the cabinet back from your set.

Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not expose

the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet

slots or openings. Never spill any kind of liquid on the

television receiver.

Do not block the ventilation holes in the back cover.

Adequate ventilation is essential to prevent failure of

electrical components.

Do not trap the power supply cord under the television

receiver.

Never stand on, lean on, or suddenly push the television or

its stand. You should pay special attention to children.

Serious injury may result if it falls.

Do not place your television on an unstable cart, stand,

shelf or table. Serious injury to an individual , and damage

to the television, may result if it falls.

When the television receiver is not used for an

extended period of time, it is advisable to disconnect

the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight

and other sources of heat. Do not stand the television

receiver directly on other products which give off heat,

e.g. video cassette players and audio amplifiers. Do not

place naked flame sources, such as lighted candles on

the television.

Dim:51 5*320 mm(不包括底座）

If the television is to be built into a compartment or similar

enclosure, the minimum distances must be maintained. Heat

build-up can reduce the service life of your television, and

can also be dangerous.

SAFETY AND WARNINGSUK

3 UK

Main features

① Used as Television, display terminal, PC display；

② High luminance, wide viewing angle；

③ HDMI interface；

④ Multi-Media player (USB);

Infrared Remote Controller..............

User’s M anual......................................1

Battery(AAA).......................................2

Accessories

Main parameter

40"

Viewing Picture Size (Diagonal)

Resolution

Aspect Ratio

TV System

Power consumption

Signal Input

Video Signal System

Input Power Voltage

1920 x 1080

16 : 9

Analog RGB(VGA) x 1

Audio Output Power

（THD 7%）

2x8W

High-Definition Multimedia Interface (HDMI) x 2

Composite Video Input x 1

Audio Input x 1

Y Cb (Pb )Cr (P r) x 1

Horizontal definition（TV line）

Composite Video input >=350

Y Cb(Pb ) C r(Pr ) >=400

USB x 1

RF x 1

CI x 1

SCART x 1

LNB IN x 1

78W

AC 100-240V 50/60Hz

PC Audio x 1

PAL/SECAM/MPEG2/MPEG4/H.264

PAL-B/G, I, D/K

SECAM-B/G , D/K , L , L’

DVB-T, DVB-C,DVB-S

Storage channel number

1500(DTV); 100(ATV)

Signal Output

Headphone x 1

COAXIAL x 1

Standby Power consumption

0 W.5

INTRODUCTION

UK 4

Base Stand Assembly Instruction

Prepare to place the TV with the display side down on a flat surface. Due to the size and weight of this

TV, the use of 2 people is recommended when moving it. Ensure the table or desk you use provides

a flat, totally clean surface, and use a soft cloth between the face of the TV and the table to protect the

TV's screen.

1. Place the TV with the display side down on a flat surface. Use a cloth to protect the display.

Align the back surface of the base pillar base with the TV reserved screw holes.

2. Install and tighten the four holes at the bottom of the back of the TV with four screws ,

complete the whole installation.

INSTALLATION

5 UK

Screws(4x26PWM)x4

Front panel

KEYBOARD

1. Remote control sensor

2. Indicator LED: RED STANDBY

3. Key board

1．SOURCE：

Display the input source menu.

2．MENU：

Display main MENU.

3．V-/V+

Adjust sound level.

In MENU mode, press“V+”or“V-”to

adjust the item that you selected.

4．CH+/CH-

In TV mode，press“CH+”or“CH-”to change

the channel up and down.

In MENU mode, press “CH+”or“CH-”to select

items.

5. STANDBY

Press this button to turn the unit ON from

STANDBY mode.

Press it again to turn the set back to STANDBY.

REAR AV Connections

All the terminals are(from left to right):

AC Power Socket, YPbPr INPUT, VIDEO INPUT, AUDIO INPUT, COAXIAL OUTPUT, , SCART INPUT.

Note: VIDEO and YPbPr share one audio channel.

LNB IN

REAR AV Connections(SIDE)

All the terminals are(from left to right):

USB, HDMI2, HDMI1, HEADPHONE, CI, PC AUDIO, VGA, RF.

Note: When HDMI port get DVI signal ,the audio signal receives from the PC

Audio channel.

UK 6

INSTALLATION

30 30

SOURCE MENU V- V+ CH- CH+ Standby

AC-INPUT

100-240V~50/60Hz

VIDEO/Y Pb Pr L R COAXIAL LNB IN SCART

R FVGA

PC AUDIO

COMMON INTERFACE(CI)

HEADPHONE

HDMI1

HDMI2USB

ANTENNA

Note:

Aerial connections:IEC(female).

Input impendance:75 unbalanced.

7 UK

INSTALLATION

STEPS:

Be sure both the TV and computer are Power off.

1.Connect VGA and audio cable

2.Connect power cord

3.Power on the TV, switch to PC mode

4.Power on the PC

This sequence is very important.

PRESET MODE (PC)

NOTE: PC V.Freq.(Hz) not more than 60Hz.

800*600

1024*768

37.88

48.36

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

1366*768

47.7

PRESET MODE (HDMI)

800*600

1024*768

37.88

48.36

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

1360*768

47.7

1280*768

47.3

1920*1080

67.5

UK 8

INSTALLATION

R FVGA

PC AUDIO

COMMON INTERFACE(CI)

HEADPHONE

HDMI1

HDMI2USB

This TV provides one group of AV, one group of YPbPr for convenient connection to VCR, DVD or

other video equipment. Please refer to the owner's manual of the equipment to be connected as well.

You can use the input terminals on TV set rear as follows.

AV EQUIPMENT

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc...

YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.

Note: 1. and YPbPr share one audio channel.

2.When HDMI port get DVI signal, the "PC Audio" channel is changed to receive the audio for HDMI port.

3.Sometimes it will not support in different device because the device supplys nonstandard signal.

VIDEO

9 UK

INSTALLATION

R FVGA

PC AUDIO

COMMON INTERFACE(CI)

HEADPHONE

HDMI1

HDMI2USB

AC-INPUT

100-240V~50/60Hz

VIDEO/Y Pb Pr L R COAXIAL LNB IN SCART

Yellow (video)

White(audio L)

Red(audio R or Pr)

Blue(Pb)

Green(Y)

VIDEO EQUIPMENT with YPbPr

W R

HDMI

W R

TO AUDIO

OUTPUTS

VIDEO EQUIPMENT

TO VIDEO

OUTPUTS

REMOTE CONTROL

1. POWER:To set the TV to standby or power on.

2. : In USB mode, used as reverse key, in teletext

mode used as subpage key.

3. : In USB mode, used as forword key, in teletext

mode used as reveal key.

4. : Press in USB Mode to begin or continue playback.

5. : Press in USB Playback Mode to pause playback.

6. TEXT:To enter or TELETEXT.

7. SUBTITLE: To turn on subtitles press the subtitle button

in DTV mode.

8 . : Displays the main on-screen menu.

9 . CURSOR: To move within the menu.

10. OK: Confirms selection.

11. EPG: To display information about the program being viewed

and what's on next in DTV mode.

12. FAV: To access your favourite channels list in TV or DTV mode.

13. VOL+/- : To adjust sound level.

14. NUMERIC KEY: For direct access to channels.

15. AUDIO: To select the available audio language of TV programs .

16. MUTE: To disable or enable the sound output.

17. : In USB mode, used as next key, in teletext mode used as

list key.

18. : In USB mode, used as previous key, in teletext mode used

as hold key.

19. :In teletext mode used as index.

20. : Press to stop play in USB mode.

21. INFO: To display the program information of the show you

are watching, press the info button.

22. FREEZE: Press to freeze the picture you are watching.

23. : Press to display and select the available video sources.

24. EXIT: To return to the previous menu or exit menu.

25. CH+/CH-: To access the next or previous channels.

26. REC:

27. RECALL: DTV Mode: RECALL:Jumps to last channel viewed.

Press to record the TV program you are watching in

DTV Mode.

VOL

REC

FREEZE

UK 10

REMOTE CONTROLLER

EXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press :

You will obtain :

LIST

TELETEXT

Enter the number of the page required using the 0 to 9 up/down. Example:

page 120, enter 120. The number is displayed top left, the counter turns and

then the page is displayed. Repeat this operation to view another page. If

the counter continues to search, this means that the page is not

transmitted. Select another number.

Coloured are as are displayed at the bottom of the screen. The 4 coloured

keys are used to access the items or corresponding pages. The coloured

areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically displayed

successively. This key is used to stop or resume sub-page acquisition.

The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

The user can set four favorite pages to be directly linked to the four color

keys. While list mode is activated, it is not possibility to use TOP or FLOF

navigation with the color keys. The favorite page numbers should be stored

and restored to/from nonvolatile memory for each channel by the system

software.

This is used to call or exit teletext modes. The summary appears with a list

of items that can be accessed. Each item has a corresponding 3 digit page

number. If the channel selected does not broadcast teletext, theindication

100 will be displayed and the screen will remain blank (in this case, exit

teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be consulted like

a newspaper. It also offers access to subtitles for viewers with hearing problems or who are

not familiar with the transmission language(cable networks, satellite channels, etc.)

REMOTE CONTROLLER

11 UK

UK 12

TV OPERATION

Installation Guide

4). Channel tuning will commence. This operation

may take up to several minutes. The display will show

the progress of the tuning and the number of channels

found.

5). If you want to skip the ATV tuning, press the MENU

button to interrupt the tuning half way. A pop-up screen

will be displayed, press the button to select YES to

confirm. You will then go straight to DTV tuning. You

may repeat the above step if you also want to skip the

DTV tuning. An installation reminder will appear the

next time you turn on the TV.

6). After tuning is complete, the channels are arranged

in a preset order. If you wish to skip channels, modify

the preset order or rename channels, select Programme

Edit under the Channel menu.

1. 1 Auto Tuning (DVB-T)

1). Press the MENU button and then press the

buttons to select the CHANNEL menu.

ATV Manual Tuning

Programme Edit

Signal Information

< >

CHANNEL

Auto Tuning

DTV Manual Tuning

Software Update (USB)

CI Information

1. CHANNEL MENU

2). Press the buttons to select Auto Tuning and then

press the OK button.

1).Press the buttons to navigate the menu

and change the settings. Press the OK button to

confirm.

Select your desired language to be displayed on

the menu.

2).Press the buttons to select Home Mode

or shop Mode press the OK button to confirm.

3). Press the buttons to select DVB-T/DVB-C/DVB-S

and then press the OK button to confirm.

a. If you select DVB-T to next step is select the Tune

and country the press the OK button to start tuning.

b. If you select DVB-C, the next step is to config the

DVB-C system like (scan type /Frequency/Network

ID/Sy mbol(KS/S) then press OK button to into the

tune type and country select menu,this step is the

same as DVB-T, select the tune type (DTV/ATV).

Choise the right country, press OK button to start

tuning.

Please select an OSD language

Deutsch

English

Danish

Czech Spanish

Russian

Croatian

French

Italiano

Nederlands

Magyar

Norsk

Português

Polski

Programme(s)

(ATV)

ATV

Home Mode

Mode Select

Shop Mode

HOME or SHOP modes

1. Home Mode is an energy-saving Mode. Home

Mode is recommended for normal viewing setting

and is set as default during manufacturer.

2. Shop Mode is an option for retailers for Advertising

or product presentation. Shop Mode has a brighter

image than Home Mode.

c. If you select DVB-S, you may select to load default

DVB-S channel list or select to start a new channel

search.

DVB-S

Rumania

Russian

Serbia

Slovenia

Spain

Sweden

Switzerland

United Arab

Emirates

TV OPERATION

13 UK

4). In the Tune Type menu, press the buttons to

select ATV / DTV / DTV + ATV. Press the button

and then press the buttons to select the

country where you will operate the TV. Press the

OK button to confirm.

5). Channel tuning will commence. This operation

may take up to several minutes. The display will

show the progress of the tuning and the number of

channels found.

6). If you want to skip the ATV tuning, press the

MENU button to interrupt the tuning half way. A

pop-up screen will be displayed, press the button

to select YES to confirm. You will then go straight to

DTV tuning. You may repeat the above step if you

also want to skip the DTV tuning.

7). After tuning is complete, the channels are

arranged in a preset order. If you wish to skip channels,

modify the preset order or rename channels, select

Programme Edit under the channel menu.

1.2 Auto Tuning (DVB-C)

2). Press the buttons to select Auto Tuning and

then press the OK button.

3). Press the buttons to select DVB-T/DVB-C/DVB-S

Press select DVB-C and then press the OK button to

confirm.

4). Press buttons to select Scan type/Symbol(Ks/S)

press the OK button to confirm.

5). In the Tune Type menu, press the buttons to

select ATV / DTV / DTV + ATV. Press the button and

then press the buttons to select the country

where you will operate the TV. Press the OK button to

confirm.

ATV Manual Tuning

Programme Edit

Signal Information

< >

CHANNEL

Auto Tuning

DVB-C Manual Tuning

Software Update (USB)

CI Information

3). Press the buttons to select DVB-T/DVB-C/DVB-S

Press select DVB-T and then press the OK button to

confirm.

1). Press the MENU button and then press the

buttons to select the CHANNEL menu.

Programme(s)

(ATV)

ATV

DVB-S

Rumania

Russian

Serbia

Slovenia

Spain

Sweden

Switzerland

United Arab

Emirates

Rumania

Russian

Serbia

Slovenia

Spain

Sweden

Switzerland

United Arab

Emirates

UK 14

TV OPERATION

6). Channel tuning will commence. This operation

may take up to several minutes. The display will

show the progress of the tuning and the number of

channels found.

7). If you want to skip the ATV tuning, press the MENU

button to interrupt the tuning half way. A pop-up screen

will be displayed, press the button to select YES to

confirm. You will then go straight to DTV tuning. You

may repeat the above step if you also want to skip the

DTV tuning.

8). After tuning is complete, the channels are arranged

in a preset order. If you wish to skip channels, modify

the preset order or rename channels, select

Programme Edit under the channel menu.

2. 1 DTV Manual Tuning (DVB-T)

NOTE:

All the channels including ATV, DTV and Radio

can be tuning by one time,if the Tune Type is

DTV+ATV .

All the stored channels will be disappear after

auto tuning .

After auto tuning , the channel will skip to

the first DTV channel.

ATV Manual Tuning

Programme Edit

Signal Information

< >

CHANNEL

Auto Tuning

DTV Manual Tuning

Software Update (USB)

CI Information

2). Press the buttons to select DTV Manual

Tuning and then press the OK button.

4). Press the MENU button to return back to the main

menu.

5). Press the EXIT button to exit the menu.

2. 2 DTV Manual Tuning (DVB-C)

1). Press the MENU button and then press the

buttons to select the CHANNEL menu.

3). The DTV Manual Tuning screen will pop up.

Press the buttons to select the desired UHF

channel and then press the OK button to commence

the search of that channel. When the signal has

been tuned, the picture and signal strength will be

displayed on the screen.

1). Press the MENU button and then press the

buttons to select the CHANNEL menu.

2). Press the buttons to select DVB-C Manual

Tuning and then press the OK button.

3). The CADTV Manual Tuning screen will pop up.

Press the buttons to select(Frequency /Symbol

(ks/s/QAM Type QAM) press the OK button to

commence the search of that channel. When the

signal has been tuned, the picture and signal

strength will be displayed on the screen.

4). Press the MENU button to return back to the

main menu.

5). Press the EXIT button to exit the menu.

ATV Manual Tuning

Programme Edit

Signal Information

< >

CHANNEL

Auto Tuning

DVB-C Manual Tuning

Software Update (USB)

CI Information

Programme(s)

(ATV)

ATV

1.3 Auto Tuning (DVB-S)

2). Press the buttons to select Auto Tuning and

then press the OK button.

3). Press the buttons to select DVB-T/DVB-C/DVB-S

Press select DVB-S and then press the OK button

to confirm.

4). Press BLUE key to start a new channel search; Press

Exit key to skip the channel search to load the default

channel list.

1). Press the MENU button and then press the

buttons to select the CHANNEL menu and then

press the OK button.

TV OPERATION

15 UK

Favourite

Press to choose the program , press FAV

button , it will show on the right side of the

program.Choose the FAV program , press

FAV button again , you can cancel the FAV,

the will disappear .

Once your favorite group is created, you can

press the FAV key to quickly access your favorite

channel.

The second item of the MENU is PICTURE MENU.

You can adjust picture effect here, such as

contrast, brightness, etc.

Press to move, press OK to adjust.

2. PICTURE MENU

5.1 CI information: (optional)

This menu can display the CI card' s information.

Rename:

Only can rename ATV programs .

Move the cursor to the program, press teletext

green button to rename the program.

Press to choose the character. Press to

move the cursor .

Press MENU button to exit edit , Press EXIT to

exit the menu.

Note: ATV programs name only can be 5 character.

Use the Arrow Buttons to select the channel you

wish to move. Then press the Yellow Button to

select Move function. Once active use the Arrow

Buttons to move and then press OK to confirm.

Press to choose the program , press teletext

blue button to skip this program, The will

show on the right side of the program .

Choose the skipped program, press blue button

again , you can cancel the skip ,The will

disappear .

NOTE:

Press teletext red button to storage to channels

after manual tuning .

4.1 Program edit:

You can Delete ,Rename ,Move, Skip , FAV any

programs.

Delete

Press teletext red button , the program in cursor

will delete.

ATV Manual Tuning

Storage To 1

System BG

Current CH 1

Fine-Tune

Frequency 255.25 MHz

Save MENU

3.1 ATV Manual tuning :

You can change the sound system to search

the analog TV channels and fine tune the

channels , then storage the channels you

selected.

NOTE:

1).Tint is available in NTSC system only.

2).There are four colors temperature modes

can be selected medium, warm, cool,user

3).Screen is available in PC mode only which,

can adjust Horizontal position, vertical position,

size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND MENU.

You can adjust the sound effect here such as

treble, bass, balance etc.

Press to move, press OK to adjust.

Color Temperature

Aspect Ratio

Noise Reduction

Screen

Picture Mode Standard

< >

PICTURE

Picture Mode Standard

Contrast 50

Brightness 50

Color 50

Sharpness 50

Tint 50

Color Temperature Medium

Red 40

Green 31

Blue 50

< >

Balance

Auto Volume

Sound Mode Standard

SOUND

Surround Sound

AD Switch

SPDIF Mode

TV OPERATION

UK 16

NOTE:

The default pass word is 6666.

Block program: Press to choose the

program ,press teletext green button to block

the program. If you want unblock the program,

pls enter the main menu , input the password,

then press green button again.Parental

guidance: Press to choose rating.

7. USB

Press the source button and then select USB

item to enter the USB menu.

Please make sure that the USB device have

plugged in the slot.There are four type media

item can be selected, such as photo, music,

Movie, and text. Select the type media item by

pressing , press OK button to enter

the disk selection menu.

PHOTO

USB 2.0

MOVIE MUSIC TEXT

Return C

1/1

Press the to select the right disk and press

OK to display media files and folder list or

choose Return to back to the media type

selection menu.

6.LOCK MENU

The sixth item of the menu is the LOCK MENU You

can lock system, set password, block program and

set parental guidance. Once you set the lock system

on, you can not search the channels.

Set Password

Lock System

LOCK

< >

Block Program

Parental Guidance Off

Note:

Auto volume: only available when the input signal

volume is too large or distortion.

4.TIME MENU

The fourth item of the menu is the TIME MENU You

can adjust the clock, power on/off time, sleep time

etc Press to move, press OK to adjust.

NOTE:

Within minutes there is no signal, the TV will auto

sleep.

Off Time

On Time

Sleep Timer

Time Zone

Clock -- -- -- --

TIME

< >

5.OPTION MENU

The fifth item of the MENU is the OPTION

MENU. You can adjust the Menu language,

Audio language,Subtitle language etc.

NOTE:

Restore factory default will clear all the programs

and password.

In PVR File system menu you can set up USB

disk for PVR.

Check PVR File System Start

USB Disk

Format

Time Shift Size

Speed

Free Record Limit 6 Hr.

Select Disk C:

< >

Restore Factory Default

OSD Language English

OPTION

Audio Languages

Subtitle Languages

PVR File System

HDMI CEC Off

Home / Shop Mode

Auto Standby (4h)

17 UK

TV OPERATION

UK 18

8.DVB-S2 Operation

8.1First Time Installation

Please press the source button to enter input menu and use/ direction buttons to select DVB-S2 and press OK

key to confirm. The Channel List for ASTRA is already installed. You are now ready to watch TV.

If you are using different satellites please follow the system settings instructions to set up the satellite.

If you are using more than one Satellite you need to assign the satellites the correct DiSEqC-LNB that is used

in your satellite installation.

8.2 ManagmentSatellite

Configure the settings of satellites.

Satellites' list: Press to select a satellite, whose settings will be shown at right side.

LNB Type: Press /OK to show the list of LNB Types which is shown as frequencies of local oscillator. You

also can enter frequency by User Single, User Dual at bottom of the list.

LNB Power: Press to set the LNB power.

22K: Press to switch on or off the 22K,which is set with auto when LNB Type is dual local oscillator.

▼/▲

◀ /▶

Toneburst: Enable or Disable the toneburst switcher.

DiSEqC1.0:

DiSEqC1.1:

Motor:

DiSEqC1.2:

DiSEqC1.3:

Motor Settings:

Select the right port up to 4 for the right LNB.

Select the right port up to 16 for the right LNB.

Press LEFT/RIGHT to select DiSEqC1.2 or DiSEqC1.3. Then Press OK to

show the menu to set position.

Move the motor to a right position to lock the signal.

Move the motor according to the local and satellite positions.

Select DiSEqC and press OK to open.

Move Auto:

Move Continue:

Move Step[1]:

Store Position:

Goto Position:

Goto Reference:

Press LEFT/RIGHT to start to move West/East. It will be stopped

automatically when the signal is locked.

Press LEFT/RIGHT to start to move West/East. It will keep moving until you stop it.

Press LEFT/RIGHT to move just a step.

Store current position of motor.

Press LEFT/RIGHT to goto the position stored.

Rest all the positions.

Goto X: Goto the position calculated from the local and satellite positions.

8.2.1 Satellite settings

Add satellites:

Press RED to add a new satellite, in which you must input an unique longitude, and edit the satellite's name

with soft keyboard.

Edit satellites:

Press GREEN to edit the focused satellite.

Delete satellite:

Press YELLOW to delete the focused satellite.

Press OK to confirm.

19 UK

TV OPERATION

8.2.2 Transponder

Press EPG to switch the list to show transponders of the focused satellite. Also you can press to switch

back to satellites' list.

Add transponder:

Press RED to add a new transponder. It can't save an existing TP under the same satellite.

Edit transponder:

Press GREEN to edit the focused transponder. It can't save an existing TP under the same satellite.

Delete transponder:

Press YELLOW to delete the focused transponder. Press OK to confirm.

Single Transponder Scan:

Press BLUE to pop the menu of scanning setting. After configuring the settings, Press OK to start scanning.

Multi-Transponder Scan:

Press OK to select transponders with the mark”√",then press BLUE to pop the menu of scanning setting. After

Configuring the settings, press OK to start multi-transponder scanning.

EPG

8.2.3 Channel search

Single Satellite Scan:

Press BLUE to pop the menu of scanning settings.

Scan Mode: Press◀/▶ to select default, which scan the default transponders built in, Blind Scan and

NetWork, which scan with NIT on.

Crytped: Press ◀/▶to select All Channels or FTA Channels;

Service Type: Press ◀/▶to select ALL , DTV or Radio.Press OK to start scanning with the above settings.

Multi-Satellites Scan:

Press OK to select satellites with the mark “√" ,then press BLUE to pop the menu of scanning setting. After

Configuring like single satellite scan, press OK to start multi-satellites scan.

8.3 Program Edit

To edit your program preferences (rename, skip, favourite, move or delete), you will need to enter the

Program Edit Menu.

Delete a TV or Radio Program

Select the program and then press the RED button to delete the channel.

Move a TV or Radio Program

Select the preferred program then press the YELLOW button. Press / to move the program. Press

YELLOW again to confirm.

Skip TV or Radio Program

Select the program you would like to skip and press the BLUE button. A skip symbol is displayed. The program

is marked as a skip.

Set Favourite Program

▼ ▲

Press▼▲to choose the program , press FAV button , it will show on the right side of the program.Choose

the FAV program , press FAV button again , you can cancel the FAV, the will disappear.Once your favorite

group is created, you can press the FAV key to quickly access your favorite channel.

8.4 Signal information

It shows the signal quality and signal strange by selectet channel.

8.5 CI information

It shows informations about the CI card that is connectet to tv.

8.6 EPG (Electronic program guide)

The EPG is an on-screen TV guide that shows scheduled programs seven days in advance for every tuned channel.

Press the button on the Remote Control to access guide. It will show a list with the current runprogramms.EPG

Select “Programm Guide” and press to switch between Time / Channel.

You can use the / key to select the preferred program.

◀ ▶

▼ ▲

Stránka sa načítava ...

Changhong Electric LED40D2080ST2 Návod na používanie

Značka: Changhong Electric

Model: LED40D2080ST2

Typ: Návod na používanie

Stiahnite si PDF

správa

V iných jazykoch

français: Changhong Electric LED40D2080ST2 Mode d'emploi
italiano: Changhong Electric LED40D2080ST2 Istruzioni per l'uso
Deutsch: Changhong Electric LED40D2080ST2 Bedienungsanleitung

Changhong Electric LED40D2080ST2 Návod na používanie

Changhong Electric LED40D2080ST2 Návod na používanie

V iných jazykoch

Ďalšie dokumenty