Orava HO-83 Halogen Heater Používateľská príručka

Halogen heater

HO-83

Instruction manual EN

2EN

Intended use of the device

The device is designed exclusively for temperature control and

distribution of warm air in enclosed living spaces, to the extent speciﬁed

by technical and operational parameters and functions, safety and user

instructions and external inﬂuences of the operating environment.

Warning!

Installation and use of an electrothermal appliance or electric infrared

heater intended for heating is only possible provided that all technical

conditions and requirements for ﬁre safety laid down in applicable

legislation, technical safety standards and these operating and

operating instructions are observed. Do not use the appliance to heat

rooms with precision instruments, food, plants, works of art or animals,

as this could affect the performance, quality and durability of the items

concerned and animal health.

ORAVA electrical appliances are manufactured in accordance with

the state of the art and recognized safety regulations. Nevertheless,

incorrect and unprofessional use or use contrary to the intended

purpose may create a risk of injury or endanger the life of the user or a

third party, resp. damage to equipment and other property.

1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS

• This document contains important safety instructions and warnings

for the safe, correct and economical operation of electrical equipment.

Adherence to it helps the user to avoid risks, increase the reliability and

durability of the product.

• In this document, the general term product is used in the text sections

as: electrical equipment - is any equipment used for the production,

conversion, transmission, distribution or use of electricity.

• In terms of the purpose of the use of electricity, the term electrical

equipment in the narrower sense will include the following categories:

- electrical household appliances,

- information and communication equipment,

- consumer electronics,

- lighting equipment,

- electrical and electronic tools,

- toys and equipment for sports and recreational purposes,

- medical devices (aids),

- monitoring and control devices,

- vending machines.

1.1 General safety instructions

• Before putting the device into operation, we recommend that you

carefully read the operating instructions and operate the device in

accordance with the speciﬁed instructions!

3EN

• The safety instructions and warnings in this manual do not cover all

possible conditions and situations that may occur when using the

device. The user must understand that personal responsibility and

care are factors that cannot be incorporated into any of the products.

These factors must therefore be ensured by the users operating the

equipment.

• The manufacturer is not liable for any damage to health or property due

to non-compliance with the safety instructions and warnings!

• If possible, keep the operating instructions close to the device

throughout its service life. Always keep the operating instructions with

the appliance for future reference and use by new users.

• Use the device only for the intended purpose and in the manner

speciﬁed by the manufacturer.

• The device is intended for indoor use only.

• The device is intended for use in the home and in similar indoor areas

intended for housing without special focus.

• This appliance is intended not only for domestic use but also for the

following uses:

- in shops, ofﬁces and other similar work environments;

- in farm buildings;

- in hotels, motels and other residential areas;

- in bed and breakfast establishments.

• This is not a professional device for commercial use.

• Do not alter the technical parameters and characteristics of the device

by unauthorized modiﬁcation or modiﬁcation of any part of the device.

• The manufacturer is not liable for damage caused during transport,

incorrect use, damage or destruction of the device due to adverse

weather conditions.

1.2 Safety of the operating environment

• Do not use the device in an industrial or outdoor environment!

• Do not expose the device to:

- sources of excessive heat or open ﬂame,

- dripping or splashing water,

- vibration and excessive mechanical stress,

- insects, animals and ﬂora,

- rain, fog, high humidity rooms (washrooms, showers, bathrooms,

swimming pools and indoor swimming pools),

- aggressive and chemical substances.

4EN

• The operating environment of the device must always comply with the

speciﬁed basic characteristics.

Operating environment characteristics:

1. Ambient temperature: +5 ÷ +40 ° C

2. Humidity: 5 ÷ 85%

3. Altitude: ≤ 2,000 m

4. Occurrence of water: occasional condensation of water or occurrence

of water vapor

5. Occurrence of foreign bodies: the amount and type of dust are

insigniﬁcant

6. Degree of protection by cover: min. IP20 (the device is protected

against contact with dangerous parts by a ﬁnger and is not protected

against the effects of water)

• This degree of protection by the cover is not marked on the product

and in the technical parameters stated in the operating instructions.

• If the degree of protection of the cover on the product is different from

the degree of IPX0, this information is then stated on the label of the

device, or in the technical parameters of the operating instructions.

• Other characteristics of the operating environment in the household

(mechanical stress - shocks and vibrations, occurrence of vegetation,

animals, weather conditions ...) are negligible in terms of the effect on

the correct and safe use of electrical equipment.

1.3 Electrical safety

• Before connecting the appliance to the mains for the ﬁrst time, make

sure that the mains voltage indicated on the type plate of the appliance

corresponds to the mains voltage in your home.

• The electrical appliance is designed to be supplied from the mains 1/N/

PE ~ 230 V 50 Hz.

• The electrical safety of the appliance is only guaranteed if it is

connected correctly to the mains.

• Electrical equipment of protection class I is equipped with protection

against electric shock by means of protective earthing of inanimate

parts, which can become dangerously alive in the event of equipment

failure. Always connect such devices to properly installed power

outlets that are equipped with a protective earth and have a properly

connected protective earth conductor.

These are all electrical devices equipped with a three-wire power

supply.

• Electrical equipment of protection class II is equipped with protection

against electric shock by double insulation or reinforced insulation of

dangerous live electrical parts. Protection class II equipment must not

be equipped with means of connection protective earthing. These are

all electrical devices equipped with a two-wire power supply.

• Electrical protection class III devices are devices that are powered by

a source of low safe voltage (battery or accumulator) and do not pose

any danger to the user in the event of an electric shock.

5EN

• To ensure increased safety against the risk of electric shock when

using electrical appliances by laymen, it is recommended to install a

residual current device (RCD) in the power supply circuit for sockets

with a rated current not exceeding 20 A with a rated tripping current not

exceeding 30 mA. Consult a qualiﬁed electrician to ensure the safety

and correctness of the electrical installation.

• Use only the power cord with the plug (mains lead) that came with the

device and is compatible with the mains socket. Use of another cable

may result in ﬁre or electric shock.

• Always connect the appliance to an easily accessible mains socket. In

the event of an operating fault, the appliance must be switched off and

disconnected from the mains as soon as possible.

• The power cord and mains plug must always remain easily accessible

for safe disconnection of the electrical appliance from the mains.

• Do not unplug the power cord by pulling on the cord. To disconnect,

unplug the power cord.

• If you use an extension cord, make sure that the total ampere rating

of all devices plugged into the extension cord does not exceed the

extension cord‘s ampere rating.

• If you must use an extension cord or power supply, make sure that the

extension cord or power supply is connected to an electrical outlet and

not to another extension cord or power supply. The extension cord or

power strip must be rated for grounded electrical plugs and plugged

into a properly grounded electrical outlet.

• The plug of the appliance‘s power cord must be compatible with the

mains socket. Never use any adapters or modify the outlet in any other

way. Do not use unsuitable and damaged sockets!

• To prevent electric shock, plug the device‘s power cords into properly

grounded electrical outlets. If your device has a 3-pin power cord, do

not use adapters that do not have a grounding element or remove the

grounding element from the plug or adapter.

• Do not bend, squeeze or otherwise expose the appliance ‚s power cord

/mains cord to mechanical stress or external heat sources. Damage to

the power cord may result in electric shock.

• If the power cord is damaged, disconnect the appliance from the mains

and do not continue to use it.

• If the supply cord/plug is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualiﬁed persons in order to

avoid a hazard.

• Regularly check and keep the electrical appliance as well as the power

cord and mains socket. Unplug the power cord regularly and clean as

needed. Contamination by dust or other substances can cause damage

to the insulation condition and subsequent ﬁre.

6EN

• Do not expose the electrical appliance to water or humid environments.

Water entering the appliance increases the risk of electric shock. If

the power cord is wet or water has entered the appliance, unplug it

immediately. If the appliance is connected to the mains and if possible,

switch off the power supply to the circuit breaker before attempting to

disconnect the power supply. Be extremely careful when unplugging

wet cables from a live power source.

• If the electrical equipment is installed (connected) to remove the

protective covers, so after the installation, its electrical parts must not

be accessible to users.

1.4 Personal safety

• This appliance is intended for use and operation by persons without

electrical qualiﬁcation - by laymen, according to the instructions

provided by the manufacturer.

• The operation of the device includes activities such as switching

the device on and off, user manipulation and setting of operating

parameters, visual or auditory control of the device and user cleaning

and maintenance.

• This appliance may be used by children from the age of 8 and persons

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, if they have been given supervision or

instruction concerning use of the appliance safely and understand the

dangers involved.

• Children must not play with the appliance.

• Cleaning and maintenance by users must not be performed by children

without supervision.

• Always keep the appliance out of the reach of children during use and

operation. Remember that the appliance can also be downloaded with

a freely accessible mains cord.

• Always take extra care when operating the appliance! Do not use an

electrical appliance if you are excessively tired, under the inﬂuence of

drugs or drugs that reduce attention and concentration.

• Careless handling can lead to serious injuries.

7EN

1.5 Cleaning, maintenance and repairs

• Carry out routine user cleaning and maintenance of the electrical

appliance only as recommended. Do not use solvents or harsh cleaning

items for cleaning. Dirt and visible stains from ﬁnger contact, resp.

hands can be cleaned using cleaning detergents specially designed for

cleaning household appliances.

• Always disconnect the appliance from the mains when you are not

using it, cleaning it or when the appliance has malfunctioned.

• Protect electrical appliances that are cleaned after use and are not

intended to be completely or partially immersed in water or any other

liquid against the effects of dripping and / or splashing water and

against immersion.

• Electrical household appliances, like all other technical equipment,

are subject to the effects of the surrounding operating environment

and natural wear. Due to the fact that there is no legal framework for

regular maintenance used in household appliances, the manufacturer

recommends that the user have the appliance inspected and

professionally cleaned at least once a year by a special service.

• By doing so, it is possible to maintain safety, operational reliability and

increase the service life of the equipment.

• Do not disassemble the electrical appliance! The appliance operates

with dangerous voltage. Therefore, always switch off the appliance and

disconnect it from the mains during user maintenance. In the event of a

fault, have it repaired by an authorized service center.

• Before you call for service:

1. Switch the appliance off and on to make sure that the fault reappears.

2. If the appliance malfunctions persist after the above operations, call

the nearest special service.

• Never repair the electrical appliance yourself!

• Unauthorized, unqualiﬁed and unprofessional intervention in the

electrical appliance may result in electric shock or other serious injury.

• Only entrust warranty and post-warranty repairs of the electrical

appliance to a qualiﬁed technician(*).

(*) Qualiﬁed specialist: the sales department of the manufacturer or importer or a person

who is qualiﬁed and authorized to carry out this type of activity with the ability to avoid

all hazards.

8EN

2. Special safety instructions. Read carefully!

• The electrical equipment is designed and manufactured in such a way

as to allow safe operation and use by unqualiﬁed persons. Despite all

the measures taken by the manufacturer for safe use, operation, there

are certain residual risks and the possible dangers associated with

them. The following symbols and their meanings have been used on

the device and in the accompanying documentation to warn of possible

dangers:

This symbol alerts users that the device is operating on

hazardous voltage. Do not remove the protective covers on the

device.

Failure to observe the safety instructions when using and

operating the device may result in:

Danger of electric shock! Danger of serious injury or death!

This symbol alerts users to the risk of failure to observe the

safety instructions when using and operating the equipment:

Danger of serious injury or death! Risk of equipment damage

or other property damage!

This symbol alerts users to the risk of failure to observe the

safety instructions when using and operating the equipment:

Danger of ﬁre!

This symbol used on the product replaces the sentence:

WARNING! Do not cover.

Transport/Transfer

• When transporting and carrying, be careful when moving to prevent the

device from tipping over and being damaged.

• Only transport the device after a thorough inspection of the area and

the route, which must be unobstructed.

• Do not carry the device until all cable connections have been

disconnected. Never carry the device while it is in operation.

• Carry the device by holding the handles with both hands or the lower

edge of the base and the ﬁxed parts of the covers.

• When carrying, make sure that your hands and the device are not wet

or slippery.

Danger of serious injury or death!

Danger of damaging the device!

9EN

Unpacking/Packaging

• Before putting the device into operation, unpack the device and dispose

of all its parts and accessories of packaging materials, labels and tags.

Keep all packaging materials in a safe place or keep them out of the

reach of children and vulnerable people.

Risk of serious injury!

Danger of suffocation!

Inspection/Commissioning

Note!

• Use only electro-thermal heating equipment that is in good technical

condition and under the conditions speciﬁed by the applicable

legislative requirements, ﬁre safety regulations and in this manual.

• We recommend performing initial and subsequent regular inspections

of the device. Prior to installation and initial commissioning, make sure

that the device is complete and shows no visible signs of damage.

• Do not use the appliance if it is incomplete, damaged or any part of

it has been damaged during transport or use. In this case, have the

device repaired by a specialist garage.

• Never clean the appliance (body with electrical parts and control panel)

and the power cord with plug in such a way that liquid could ﬂow into

the appliance. Clean these parts only with a damp cloth and wipe dry or

allow to dry.

• Only clean the appliance when it is switched off and unplugged.

Risk of serious injury!

There is a risk of electric shock!

There is a risk of ﬁre!

Location/Installation

• The device is intended for use as a portable or with the possibility

of mounting on a wall (depending on the model). Equipment fasten

to building components - on walls only in accordance with the

requirements for technical properties of building components, ﬁre safety

measures and installation instructions.

• Use the device only in the working position (upright and with the stand

or feet correctly mounted) and on a ﬂat surface where there is no risk of

it tipping over.

• Do not place the device near curtains, textiles, furniture.

• The appliance must not be used directly on high pile carpets.

Warning! Read carefully.

• An electric heating appliance or electric heater intended for heating can

be installed on a ﬂoor made of ﬁre reaction class material A1ﬂ or A2ﬂ.

These technical building materials are classiﬁed as non-combustible

according to the uniform European classiﬁcation system (where the

index ﬂ means “ﬂoor”). From selected materials we present e.g. stone

paving, ceramic paving, concrete, etc.

10EN

• The appliance may only be installed on a ﬂoor made of reaction-to-

ﬁre class materials Bﬂ, Cﬂ, Dﬂ, Eﬂ or Fﬂ using an insulating pad. From

selected materials we present e.g. ﬂoorboards, OSB boards, beech

parquets, PVC, laminate ﬂoating ﬂoor, linoleum, polyamide carpets,

etc. The insulating pad must be made of a material of reaction to ﬁre

class A1 or A2 with a thickness of at least 1 mm, in normal operation

resistant to the mechanical effects of the load. The insulation pad must

protrude at least 150 mm on each side of the appliance.

• An electric heating appliance or electric infrared heater intended for

heating may only be located and installed in the vicinity of building

structures and materials of reaction to ﬁre class B, C, D, E or F using

a protective screen. The protective screen must be made of materials

of reaction to ﬁre class A1 or A2 with a thickness of at least 3 mm. The

protective screen must be at a distance of at least 30 mm from building

structures, protected objects or material.

The protective screen must extend beyond the outline of the appliance

by at least 300 mm above its upper edge and at least 150 mm from the

side edges.

• If a protective screen is placed between the appliance and building

structures or protected objects, the speciﬁed safety distance can be

reduced by a maximum of half.

• Only place the electric heating appliance intended for heating without

the use of a protective screen at a safe distance from building

structures made of materials of reaction to ﬁre class B, C, D, E or

F and ﬂammable objects and ﬂammable substances. Keep a safe

distance of at least 200 mm in all directions.

• Only place the electric infrared heater for heating without the use of a

protective screen at a safe distance from building structures made of

materials of reaction to ﬁre class B, C, D, E or F and ﬂammable objects

and ﬂammable substances. Keep a safe distance of at least 800 mm in

the direction of the heat radiation, at least 400 mm from the top edge

and at least 200 mm in the other directions.

From selected materials we present e.g. untreated wood, etc.

• Do not place or install an electric heating appliance or electric infrared

radiator in a bathroom, washroom and shower area unless the safety

requirements for electrical equipment and electrical installations in

these areas are met.

• If the bathroom in the living space is sufﬁciently structurally spacious

and meets the requirements for zoning, the location and use of

electrical equipment is only possible with regard to the safety

requirements set for these spaces.

• The electric heating appliance or electric infrared heater can only be

placed in the bathroom outside the 0-1-2 zone.

• The appliance must be installed in such a way that the switches and

other controls are not within human reach of the bath or shower.

11EN

• Consult a qualiﬁed electrician for more detailed information on the

requirements for the installation and use of electrical equipment in

washrooms.

• The device must be installed in accordance with the national and local

safety regulations applicable to the connection of electrical equipment

with protective earthing. To provide additional protection against the risk

of electric shock, it is recommended to install a residual current device

(RCD) in the electrical supply circuit of the device with a rated tripping

current not exceeding 30 mA.

• If you have any questions regarding electrical installation, consult a

qualiﬁed electrician.

• Do not place or use the device in places where there is a risk of it

tipping over.

• Do not place the device:

- on unstable ﬂoors or mats,

- on unstable tables or pieces of furniture,

- on uneven and dirty surfaces,

- near containers with water or other liquids.

• Only place the device on level, ﬁrm and stable surfaces - on ﬂoors and

ﬂoor coverings that have a stable and solid structure (eg ceramic tiles,

wooden ﬂoors, etc.). Do not place the device on ﬂoors that have an

unstable structure, such as carpets or other decorative ﬂoor coverings

with long ﬁbers.

• Do not place or use the device on “soft” surfaces, such as bed

mattresses, seats of upholstered sofas and armchairs, etc.

• Always make sure that the place where you want to place the device

has sufﬁcient space and stability.

Danger of equipment damage or other property damage!

• Do not place or use the appliance in the immediate vicinity of a bath,

shower or swimming pool.

Warning!

The device must not be placed directly under an electrical outlet.

12EN

Operation/Supervision

Warning!

• The appliance may only be operated if it is in good technical

condition and under the conditions laid down by the generally

binding regulations on technical conditions and ﬁre safety

requirements during installation and these operating and use

instructions.

• The device is intended for use in smaller living and working areas.

• The device must not be used in areas where there is a risk of

ﬁre or explosion, in the presence of solid or liquid ﬂammable

substances and their vapors, mist or dust and in atmospheric

conditions where, after ignition, the ﬂue gases are easily spread

through the air unless all technical conditions and requirements

for ﬁre safety during its installation and operation.

• To prevent a hazardous situation, do not expose the device to rain

or other sources of moisture, water or other liquids.

There is a risk of ﬁre!

There is a risk of electric shock!

Warning! To prevent overheating, do not cover the heater.

• Do not partially cover the device. Do not place any objects on

the device. Do not insert or allow foreign objects to enter the

openings of the device covers.

• Do not cover the air vents.

• Air ventilation ensures safe and reliable operation of the device.

• Leave sufﬁcient free space around the device to ensure the

required air circulation and safe operation.

There is a risk of electric shock! There is a risk of ﬁre!

• Do not use the appliance to dry textiles, clothing, footwear or any

other objects!

There is a risk of ﬁre!

Warning!

• Be extremely careful when operating the appliance.

• Some surfaces of the device become very hot during operation.

Do not touch the heated surfaces of the device. Use only handles

and grips to handle the device.

• Parts of the appliance that become hot during operation remain

hot for some time even after the appliance has been switched

off and disconnected from the mains. Danger of burns from hot

surfaces!

Danger of very serious injuries!

• Always keep the device under supervision during use and

operation!

• This appliance is not intended for operation via an external

programmer, automatic timer and remote control, as there is a

risk of ﬁre if the appliance is covered or incorrectly positioned.

• Do not leave the appliance unattended during operation,

especially if there are children, incompetent persons or animals in

its vicinity.

13EN

• Use only its own controls and, if applicable, the supplied remote

control to operate the device.

• Do not place any objects on the device, do not allow foreign

bodies to enter the openings. Do not use the device near freely

moving textiles - curtains, draperies, etc. Make sure that no dirt

from the environment, such as clumps of dust, ﬁbers, etc.

• Take extra care during the use and operation of the device to

avoid contact with rotating parts with your ﬁngers, hair, loose

decorative chains or loose clothing.

• Do not place any containers of water or other liquids on the

device to prevent spillage and ingress of the liquid into the interior

of the device.

• To avoid a dangerous situation, do not touch the device with wet

or damp hands.

• Do not use the appliance near bathtubs, showers, washbasins or

other vessels containing water, including swimming pools. Do not

remove the device if it falls into the water. Unplug the power cord

from the power outlet ﬁrst, then remove the device from water. In

such cases, take the device to a specialist garage to check that it

is safe and working properly.

There is a risk of electric shock!

There is a risk of equipment damage or other property damage!

Warning!

• Do not allow children to handle the device. The device can tip

over and cause serious injury. Mechanical damage (cracking or

breaking of parts and covers) of the device can cause serious

injuries.

Risk of serious injury!

There is a risk of equipment damage or other property damage!

• Before each connection of the device to the mains, make sure

that the main switch (control knob) is in the “0” “OFF” position.

• Do not turn the machine on or off by plugging or unplugging the

power cord.

• In normal use, always connect the appliance to the mains ﬁrst

and then switch on with the main switch.

• After use, turn off the machine with the main power switch, and

then unplug the power cord.

• Pokiaľ na zariadení nefunguje hlavný vypínač, zariadenie

nepoužívajte.

• Do not use the device if the main power switch does not work on

the device.

• The device is under dangerous voltage when the mains supply is

connected.

There is a risk of electric shock!

• The electrical outlet and power cord must remain easily

accessible for safe disconnection of the device from the mains.

14EN

• Take extra care not to damage the power cord running loose on

the ﬂoor.

• Never leave the device unattended and freely accessible with

a loose power cord. Children, incompetent persons or animals

could pull or knock the device behind the power cord.

• Unplug the power cord from the electrical outlet when not in use.

Store the device with the power cord attached to the solid parts of

its covers.

Risk of serious injury!

• Never overload the device beyond the limits set by the technical

parameters!

• Observe the operating mode of the device in accordance with the

operating and operating instructions.

• If you notice any abnormalities (sounds, odors, smoke ...) while

using the appliance, switch off the appliance immediately and

disconnect it from the mains. Have the device checked by a

qualiﬁed workshop.

• Never attempt to repair, disassemble or otherwise modify the

device yourself, as this may result in electric shock or ﬁre.

• Before performing user maintenance and cleaning of the

machine, always turn off the machine with the main power switch

and unplug the power cord from the electrical outlet.

• Always make sure that the appliance is switched off and

unplugged.

• Never disassemble this safety part/component (mechanical,

electrical) if it is part of the device! Do not use the device if the

safety part/component is damaged or non-functional!

• Children under the age of 3 must be prevented from accessing

the appliance unless they are constantly supervised.

• Children from the age of 3 and under the age of 8 must not plug,

regulate or clean or maintain the appliance by the user.

WARNING!

• Some parts of this product may become very hot and may cause

burns. Pay special attention if vulnerable people or children are

present.

• Never underestimate the possible dangers and take extra care !!!

15EN

Description of parts

1 Rotary knob

- 400 W - switching on one halogen tube

- 800 W - switching on two halogen tubes

- 1 200 W - switching on three halogen tubes

- 400 W TURN - switching on one halogen tube with oscillation

- rotation by 70 °

- 800 W TURN - switching on two halogen tubes with oscillation

- rotation by 70 °

- 1 200 W TURN - switching on three halogen tubes with oscillation

- rotation by 70 °

- OFF - switch off the device

Front part

2 protective metal grille

3 halogen tubes (3 pcs)

4 device body

5 pedestal

Lower part

6 screw with plastic holder (2 pcs)

7 safety fuse for heater overturning

1

2

3

4

5

6

7

16EN

Operation/Preparation

Do not connect the appliance to the mains before preparation and all switches

must be in the OFF position.

Make sure that the package contains all the parts needed to assemble the

halogen heater.

If this is not the case, contact your dealer.

Package contents:

halogen heater (1 pc)

base (1 pc)

operating instructions (1 pc)

ﬁxing screws (2 pcs)

To prevent electric shock, always disconnect the power supply before handling

the device.

Placement requirements

Place the halogen heater on a ﬂat and stable surface that guarantees

sufﬁcient free space for the ventilation holes to function properly.

There must be a distance of at least 1 m between the device and the

surrounding objects.

Assembly

1 Unscrew the screws with the plastic bracket from the bottom of the main

cover.

2 Thread the power cord through the hole in the center of the stand ﬁrst, and

then remove the main cover of the unit with the stand.

3 Secure the main cover to the base with two previously unscrewed

thumbscrews. Thread the power cord through the designated grooves and

push it all the way in.

Operation

No oscillation

1 Set the remote control to OFF and connect the appliance to the mains.

2 Turn the knob (1) to the 400 W position to switch on the appliance and the

ﬁrst (middle) halogen heating tube with a power of 400 W will also switch

on automatically.

3 If you turn the knob to the 800 W position, the upper tube will also switch

on and you will reach a total power of 800 W.

4 Turning the knob to the 1200 W position will also turn on the bottom tube

and the device will operate at the total maximum power 1 200 W.

You can freely choose with the controller whether you want the middle,

upper part of the halogen heater to heat together with the middle tube, or

all at once.

17EN

Oscillation

This power-adjustable halogen heater is also equipped with an oscillation

function (side-to-side rotation).

1 Turn the knob (1) to the 400 W TURN position to switch on the device

and the ﬁrst (middle) halogen heating tube with a power of 400 W with

oscillation - rotation by 70° will also switch on automatically.

2 If you turn the knob to the 800 W TURN position, the upper tube also

switches on and you reach a total power of 800 W with oscillation - rotation

of 70°.

3 Turning the knob to the 1 200 W TURN position will also turn on the bottom

tube and the device will operate at a total maximum power of 1 200 W with

oscillation - rotation of 70°.

You can freely select the buttons depending on whether you want the lower

or upper part of the halogen heater to heat together with the middle tube.

Rollover safety device

The device is equipped with a safety fuse, which switches it off in case of

tilting or overturning.

If it overheats, turn off the halogen heater, unplug it, and allow it to cool for at

least 10 minutes.

You can then plug in the device and turn it on again.

Notes

• Do not set the power unnecessarily too high to avoid straining the power

supply.

• Observe the safety instructions in the introduction to this manual during

operation.

• The appliance is not intended for heating large living spaces.

After operation

1 After operation, turn off all switches to position OFF and unplug the unit.

2 Store the device properly.

Cleaning and maintenance

• Before each cleaning, unplug the appliance and let it cool down.

• Use only a slightly damp cloth to clean the surface of the device itself.

• Do not use any solvents or harsh cleaners.

• If dirt is visible in the appliance, you can vacuum it through the ventilation

grilles. Do not disassemble the device!

18EN

Technické údaje

Power supply: 220 - 240V~ 50 - 60 Hz

Power consumption: 1 200 W (400/800/1 200)

Number of tubes: 3 (min. service life 3 000 hours)

Dimensions (W x H x D): 30 x 70 x 30 cm (s podstavcom)

Suitable for spaces: approx. 20 m3

Weight: 1,8 kg

We reserve the right to make changes!

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING

Dispose of used packaging material at a municipal waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the products or in the accompanying documents means that used electrical

and electronic products should not be mixed with general household waste. For proper

disposal, recovery and recycling, please return these products to designated collection

points. Alternatively, in some countries of the European Union or other European countries,

you may return your products to your local retailer when purchasing an equivalent new

product. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment natural resources and help prevent potential

negative effects on environment and human health, which could be the consequences

of improper disposal waste. Contact your local authority or nearest ofﬁce for more

details collection point. Improper disposal of this type of waste may result in penalties in

accordance with national regulations.

For business entities in the countries of the European Union

If you wish to discard electrical and electronic equipment, please request the necessary information from

your seller or supplier.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you wish to discard this product, please request

obtain the necessary information on the correct method of disposal from the local authorities or from the

your supplier.

This product complies with all the essential requirements of the EU directives that apply to it.

Producer:

Importer:

ORAVA retail 1, a.s.

Seberíniho 2

821 03 Bratislava

Slovenská republika

ORAVA distribution CZ, s.r.o.

Ostravská 494

739 25 Sviadnov

Česká republika

ORAVA retail 1, a.s.

Seberíniho 2

821 03 Bratislava

Slovenská republika

Halogenový ohřívač

HO-83

Návod k obsluze/Záruka CZ

Stránka sa načítava ...

Orava HO-83 Halogen Heater Používateľská príručka

Orava HO-83 Halogen Heater Používateľská príručka

V iných jazykoch