Delock Converter USB 2.0 > Serial RS-422/485 with 3 kV
Isolation
Popis
This USB 2.0 to serial RS-422/485 converter by Delock
offers an RS-422/485 connection for measuring devices,
POS systems, printers, modems, IoT devices etc. The
galvanic isolation prevents data transmission errors with
uneven earthing potentials, ground loops or voltage spikes.
The converter is suitable for DIN rail mounting.
Galvanic isolation
The galvanic isolation (3 KV) is done with optical isolators.
Specifikace
• Connector:
Host: 1 x Mini USB 2.0 B female
Device: 1 x RS-422/485 Terminal Block 5 pin
• Data transfer rate up to 1 Mb/s
• 1 x DIP switch: RS-422/485 set operating mode
• LED indicators for status TX / RX
• 3 kV optical isolation
• ± 15 kV ESD protection for all signal pins
• Supports: RS-485 Echo Mode
• Power consumption: 54 mA / 270 mW
• Power supply via USB (Bus-Powered)
• Operating temperature: - 30° ~ 75° C
• Storage temperature: - 40° ~ 85° C
• Relative humidity: 5 ~ 95 % (not condensing)
• Housing: plastic
• Dimension (LxWxH): ca. 101 x 42 x 22 mm
Systémové požadavky
• Windows XP/XP-64/Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-6410/10-64, Server
2012/2012R2/2016, Mac OS 10.5, Linux Kernel 2.6
• PC or notebook with one free USB port
Obsah balení
• Converter
• USB 2.0 cable, length: ca. 1 m
• Mounting set for DIN rail
• Driver CD
• User manual
Číslo produktu 62501
EAN: 4043619625017
Země původu: Taiwan, Republic of
China
Balení: • Box
Příslušenství
General
Funkce : Plug & Play
Mounting type: DIN montážní lišta: 35 mm
Specifikace: RS-422 / RS-485 (EIA / TIA)
USB 2.0
Supported operating system: Linux Kernel 2.6 nebo vyšší
Mac OS 10.14.1 nebo vyšší
Windows 10 32-bit
Windows 10 64-bit
Windows 7 32-bit
Windows 7 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows Server 2012 R2
Windows Server 2012
Windows Server 2016
LED indikátor: RX / TX
Protection: ESD (Electrostatic Discharge)
Galvanische Trennung
Interface
Konektor 1: 1 x USB 2.0 Type Mini-B female
Konektor 2: 1 x 5 Pin Terminalblock
Technical characteristics
Chipsetem: FTDI 232R
Rychlost přenosu dat: up to 921.6 Kbps
Provozní teplota: -40 °C ~ 85 °C
Humidity: 5 ~ 95 %
Signal transmission: Tx+, Tx-, Rx+, Rx-, GND
Data transmission: asynchronous
Bi-directional
Half duplex
full duplex
differential
Napětí: USB Bus powered (no additional power supply required)
Current consumption: < 100 mA
UART: USB to serial UART
Support: Modbus
RS-485 Echo Mode
Physical characteristics
Pouzdro barva: černá
Materiál pouzdra: Plastová
Pin s povrchovou úpravou: pozlacen
Délka: 101 mm
Width: 42 mm
Height: 22 mm
-
1
-
2
-
3
