Renishaw Retrofit cabinet Installation & User's Guide

Kategória
Meranie, testovanie
Typ
Installation & User's Guide
Retrofit cabinet user's guide
Document part number: H-1000-5186-04-A
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
1
General information
© 2012 ‐ 2019 Renishaw plc. All rights reserved.
This document may not be copied or reproduced in whole or in part, or transferred to any other media or language, by any means, without
the prior written permission of Renishaw.
The publication of material within this document does not imply freedom from the patent rights of Renishaw plc.
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF
PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY,
HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.
Trademarks
RENISHAW, the probe symbol used in the RENISHAW logo and REVO are registered trademarks of Renishaw plc in the United Kingdom and
other countries. apply innovation and names and designations of other Renishaw products and technologies are trademarks of Renishaw
plc or its subsidiaries.
All brand names and product names used in this document are trade names, service marks, trademarks, or registered trademarks of their
respective owners.
All trademarks and trade names are acknowledged.
WEEE
The use of this symbol on Renishaw products and/or accompanying documentation indicates that the product should not be mixed with the
general household waste upon disposal. It is the responsibility of the end user to dispose of this product at a designated collection point for
waste electrical and electronic equipment (WEEE) to enable reuse or recycling. Correct disposal of this product will help save valuable
resources and prevent potential negative effects on the environment. For more information, please contact your local waste disposal service
or Renishaw distributor.
Warranty
Renishaw plc warrants its equipment for a limited period (as set out in our Standard Terms and Conditions of Sale) provided that it is installed
exactly as defined in associated Renishaw documentation.
Prior consent must be obtained from Renishaw if non-Renishaw equipment (e.g. interfaces and/or cabling) is to be used or substituted. Failure
to comply with this will invalidate the Renishaw warranty.
Claims under warranty must be made from authorised service centres only, which may be advised by the supplier or distributor.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
2
Care of equipment
Renishaw probes and associated systems are precision tools used for obtaining precise measurements and must therefore be treated with
care.
Changes to Renishaw products
Renishaw reserves the right to improve, change or modify its hardware or software without incurring any obligations to make changes to
Renishaw equipment previously sold.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
3
Product compliance
EU declaration of conformity
Contact Renishaw plc or visit www.renishaw.com/EU for the full EU declaration.
EMC conformity
This equipment must be installed and used in accordance with this installation guide. This product is intended for industrial use only and
should not be used in a residential area or connected to a low voltage power supply network which supplies buildings used for residential
purposes.
REACH regulation
Information required by Article 33﴾1﴿ of Regulation ﴾EC﴿ No. 1907/2006 ﴾“REACH”﴿ relating to products containing substances of very high
concern (SVHCs) is available at:
www.renishaw.com/REACH
China RoHS
Contact Renishaw plc or visit www.renishaw.com/ChinaRoHS for the full China RoHS tabulation.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
4
Safety
Where this symbol is displayed on the product the user must refer to the installation and user guide for information and safety
advice.
If the equipment is used in a manner not specified by the manufacturer then the safety of the equipment may be impaired.
WARNING: To prevent unexpected machine movement, the user is advised to switch off the electricity supply, compressed air, or
any other energy sources supplied to the cabinet, in accordance with the machine manufacturer's instructions before entering the
danger zone or performing any maintenance operations.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
5
Warnings
Beware of unexpected movement. The user should remain outside of the full working envelope of probe head / extension / probe
combinations.
In all applications involving the use of machine tools or CMMs, eye protection is recommended.
Remove power before performing any maintenance operations.
There are no user serviceable parts inside Renishaw mains powered units. Return defective units to an authorised Renishaw Customer Service
Centre.
It is the machine supplier's responsibility to ensure that the user is made aware of any hazards involved in operation, including those
mentioned in Renishaw product documentation, and to ensure that adequate guards and safety interlocks are provided.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
6
International safety instructions
BG ‐ ПРЕДУПРЕЖДЕНИЕ
Моля, обърнете на приложение 1 и прочетете инструкциите за безопасност на вашия собствен език, преди за разопаковате и
монтирате този продукт.
CZ ‐ VÝSTRAHA
Před rozbalením a instalací tohoto výrobku si přečtěte bezpečnostní pokyny ve vlastním jazyce uvedené v příloze 1.
DA - ADVARSEL
Læs sikkerhedsinstrukserne i Appendix 1 FØR udpakning og installation af dette produkt.
DE - WARNHINWEIS
Bevor Sie dieses Produkt auspacken und installieren, konsultieren Sie bitte Anhang 1 und lesen Sie die Sicherheitshinweise in Ihrer Sprache.
EL ‐ ΠΡΟΕΙΔΟΠΟΙΗΣΗ
Γυρίστε στο Κεφάλαιο 1 και διαβάστε τις οδηγίες ασφαλείας στη δική σας γλώσσα προτού ανοίξετε αυτό το προϊόν για να το
εγκαταστήσετε.
EN - WARNING
Before unpacking and installing this product, please consult Appendix 1 and read the safety instructions in your language.
ES - ADVERTENCIA
Consulte el apéndice 1 y lea las instrucciones de seguridad en su idioma antes de desempaquetar e instalar este producto.
ET - HOIATUS
Palun vaadake 1. lisa ning lugege enne selle toote lahtipakkimist ja paigaldamist ohutusjuhend läbi.
FI - VAROITUKSIA
Lue liitteessä 1 olevat omalla kielelläsi kirjoitetut turvaohjeet ennen tämän tuotteen pakkauksen avaamista ja asentamista.
FR - AVERTISSEMENT
Consulter l'annexe 1 et les instructions de sécurité dans votre propre langue avant de déballer et d'installer ce produit.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
7
GA - RABHADH
Téigh chuig aguisín 1 agus déan na treoracha sábháilteachta a léamh i do theanga féin le do thoil sula ndéantar an táirge seo a dhíphacáil
agus a shuiteáil.
HR - NAPOMENA
Prije nego što proizvod izvadite iz ambalaže i ugradite ga, otvorite Prilog 1 i pročitajte sigurnosne upute na svom jeziku.
HU – FIGYELMEZTETÉS
A termék kicsomagolása és telepítése előtt olvassa el az 1. számú függelékben található, az Ön anyanyelvén hozzáférhető biztonsági
utasításokat.
IT - AVVISO
Prima di aprire ed installare questo prodotto, leggere le istruzioni di sicurezza nella vostra lingua riportate nell'Appendice 1.
JA ‐ 警告
この製品を箱から取り出し設置する前に、付録 1 に記載された安全性に関する注意書きをお読みください。
LT – ĮSPĖJIMAS
Prieš išpakuodami ir įdiegdami produktą, turite grįžti prie 1 priedo ir perskaityti nurodymus dėl saugos savo kalba.
LV – BRĪDINĀJUMS
Pirms šī izstrādājuma izsaiņošanas un uzstādīšanas izskatiet 1. pielikumā sniegtās drošības instrukcijas savā valodā.
MT - TWISSIJA
Jekk jogħġbok mur f'appendiċi 1 u aqra l‐istruzzjonijiet tas‐sigurtà fil‐lingwa tiegħek qabel ma toħroġ dan il‐prodott mill‐ippakkjar u
tinstallah.
NL - WAARSCHUWING
Ga naar appendix 1 en lees de veiligheidsinstructies in uw eigen taal, voordat u dit product uitpakt en installeert.
PL ‐ OSTRZEŻENIE
Przed rozpakowaniem i zainstalowaniem tego produktu prosimy o zapoznanie się z Dodatkiem 1 i przeczytanie zaleceń dotyczących
bezpieczeństwa w danym języku.
PT ‐ ADVERTÊNCIA
Você deve retornar ao Anexo 1 e ler as instruções de segurança em seu idioma antes de desembalar e instalar este produto.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
8
RO - AVERTISMENT
Înainte de a desface ambalajul şi a instala acest produs, vă rugăm să căutaţi Anexa 1 şi să citiţi cu atenţie instrucţiunile de siguranță, în limba
română.
SK ‐ VÝSTRAHA
Pred rozbalením a inštaláciou tohto produktu si pozrite prílohu 1 a prečítajte si bezpečnostné pokyny vo vašom jazyku.
SL - OPOZORILO
Preden izdelek vzamete iz embalaže in ga vgradite, odprite Prilogo 1 in preberite varnostna navodila v svojem jeziku.
SV - VARNING
Gå till bilaga 1 och läs säkerhetsinstruktionerna på ditt eget språk innan du packar upp och installerar denna produkt.
TW ‐ 警告
在拆開和安裝本品之前,請翻頁至附錄 1 讀母語的安全指示。
中文警告
在拆包和安装本品之前,翻到附1阅读中文版安全明。
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
9
Environmental conditions
Indoor use
Altitude Up to 2000 m
Operating temperature +5 °C to +40 °C
Storage temperature ‐25 °C to +70 °C
Relative humidity 80% maximum ﴾non‐condensing﴿ for temperatures up to +31 °C
Linear decrease to 50% at +40 °C
Pollution degree 2
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
10
Specifications
Width Depth Height Weight
600 mm 600 mm 725 mm
(826 mm including castors)
Empty: 47 kg
Fully equipped: Approximately 80
kg (depending on equipment
used)
NOTE: The maximum load of the castors is 80 kg.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
11
Retrofit cabinet connections
C14 input connection
CMM cabinet type Input connection Electrical ratings Certifications
A-5567-1000 C14 - IEC flange fused inlet 250 Vac @ 10 A CSA 1425684, UL E92187, VDE
886700-1550-0716
A-5785-0100 C14 - IEC flange fused inlet 250 Vac @ 10 A CSA 1425684, UL E92187, VDE
886700-1550-0716
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
12
CEE industrial socket input
CMM cabinet type Input connection Electrical ratings Certifications
A-5785-0200 3P CEE industrial socket 110 Vac @ 16 A IEC 60309-1 and IEC 60309-2
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
13
Output connections
CMM cabinet type Output connection Electrical ratings Certifications
All cabinets IEC type F 6‐way × 2 250 Vac @ 10 A UL94V-0, IEC60320-1, UL498,
CSA C22.2
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
14
Introduction
Renishaw's controller cabinet is a standard 19 inch rack mounting unit that is used for storing Renishaw's range of controllers, servo power
amplifiers and interfaces. This cabinet provides a unique connection to the CMM resulting in a neat and tidy installation. As well as providing
storage for all the Renishaw controller equipment the cabinet has an integral mains system with on / off switch.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
15
Installation
The installation of the retrofit cabinet should only be performed by Renishaw or a Renishaw certified installation engineer.
Connection of CMM to the cabinet is either through an interface PCB or directly to the UCC / SPA units inside.
Refer to the relevant installation guides for the equipment to be fitted:
www.renishaw.com/cmmguides
To ease installation it is possible to remove the side panels from the cabinet by unlocking them with the keys provided.
The cabinet can be used in conjunction with the Renishaw retrofit desk.
CAUTION: The control cabinet, whether empty or equipped, exceeds the limits for a two person lift. Please follow the instructions
on the outer packaging in order to remove the cabinet from the pallet. The cabinet has been provided with integral wheels for
moving it around. It is not permitted to lift a cabinet with lifting equipment - no lifting points are provided.
The installation engineer is responsible for positioning the cabinet correctly. Should it need moving you must do the following:
Ensure a minimum clearance of 300 mm around all sides
Keep cables tidy, secure from being easily pulled out and not anywhere where they may present a trip hazard
Keep the working environment within specified environmental conditions
Always match the cabinet to the CMM as the cabinet is configured specifically for each CMM installation
Lock the cabinet wheels to prevent accidental movement
Review the risk assessment
A unique set of keys are provided with the retrofit cabinet (spares are available from Renishaw)
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
16
Electrical supply ratings
Retrofit cabinet
model type
Voltage Frequency Current Transient
overvoltage
category
Fuse type
A-5785-0100 230 Vac ±10% 50 / 60 Hz 10 A maximum* 2 10 A quick blow fuse
HBC 250 V ﴾5 mm ×
20 mm)
A-5567-1000 110 Vac / 230 Vac
±10%
50 / 60 Hz 10 A maximum* 2 10 A quick blow fuse
HBC 250 V ﴾5 mm ×
20 mm)
A-5785-0200 110 Vac ±10% 50 / 60 Hz 16 A maximum* 2 16 A quick blow fuse
HBC 250 V ﴾5 mm ×
20 mm)
* It is the responsibility of the equipment installer to ensure that this maximum is not exceeded.
Refer to the label located near the mains input connector.
WARNING: Only use the installed mains supply cords.
Mains service fuse replacement
NOTE: A blown fuse indicates a defect within the cabinet. Please contact the installer or your local Renishaw office for advice.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
17
C14 input connection
CEE industrial socket input
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
18
Protective bonding (earthing)
WARNING: The site operator is responsible for providing adequate earthing provisions.
CAUTION: Any interruption of the protective conductor can make the equipment dangerous.
This equipment must be connected to a protective earth conductor via a three core mains cable. The mains plug should only be inserted into a
socket outlet with a protective earth contact.
The CMM should be bonded to the cabinet to provide an equipotential earth connection.
Make sure that the grounding requirements are strictly observed.
Mains input connector
The chord used for connection to the mains must be rated to the minimum of supply specification detailed in 'Specifications'.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
19
Isolation
CAUTION: Remove electrical power from the cabinet before opening or removing any panel. Power is removed by disconnecting
the mains leads on the rear panel (refer to the 'Installation' section).
The power switch is used to switch off the power to the internal equipment. If an additional means of isolation is required, it must be specified
and fitted by the machine manufacturer or the installer of the product. The isolator must be sited within easy reach of the CMM operator and
comply with IEC61010 and any applicable national wiring regulations for the country of installation.
CAUTION: If this switch is intended for use as an emergency isolation switch, then the door of the cabinet should be removed.
Retrofit cabinet user's guide
www.renishaw.com
Issued 12 2019
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31

Renishaw Retrofit cabinet Installation & User's Guide

Kategória
Meranie, testovanie
Typ
Installation & User's Guide