Beko HCA62640B Používateľská príručka

HCA62640B - HCA62640W

EN - ES - BS - MK - PT - RO - RU - SK - SL - SQ - SR - UA - HU

01M-8848063200-2223-10

01M-8848053200-2223-10

User Manual

Cooker Hood

2 / EN Cooker Hood / User Manual

ENGLISH 3-16

ESPAÑOL 17-33

BOSANSKI 34-47

МАКЕДОНСКИ 48-66

PORTUGUÊS 67-83

ROMÂNĂ 84-100

РУССКИЙ 101-120

SLOVENSKÝ 121-134

SLOVENŠČINA 135-148

SHQIPTARE 149-162

СРПСКИ 163-179

УКРАЇНСЬКА 180-198

MAGYAR 199-212

CONTENTS

Please read this user manual first!

Dear Valued Customer,

Thank you for preferring this Beko appliance. We hope that you get the best results

from your appliance which has been manufactured with high quality and state-of-

the-art technology. For this reason, please read this entire user manual and all other

accompanying documents carefully before using the appliance and keep it as a

reference for future use. If you handover the appliance to someone else, give the user

manual as well. Follow the instructions by paying attention to all the information and

warnings in the user manual.

Remember that this user manual may also apply to other models. Differences between

models are explicitly described in the manual.

Meanings of the Symbols

Following symbols are used in various sections of this user manual:

CImportant information and useful hints about

usage.

AWARNING: Warnings against dangerous situa-

tions concerning the security of life and property.

WARNING: Warning for danger of fire.

BWARNING: Warning for electric shock.

4 / EN Cooker Hood / User Manual

1.1 General Safety

Important Safety Instructions

Read Carefully And Keep For

Future Reference This section

contains safety instructions that

will help protect from risk of fire,

electric shock, exposure to leak

microwave energy, personal inju-

ry or property damage. Failure to

follow these instructions shall void

any warranty.

•Beko products comply with the

applicable safety standards;

therefore, in case of any damage

on the appliance or power cable,

it should be repaired or replaced

by the dealer, service center or a

specialist and authorized service

alike to avoid any danger. Faulty

or unqualified repair work may

be dangerous and cause risk to

the user.

•This appliance is intended to be

used in household and similar

applications such as:

– Staff kitchen areas in shops,

offices and other working en-

vironments;

– Farm houses

– By clients in hotels, and other

residential type environments;

– Bed and Breakfast type envi-

ronments.

•Operate the appliance for its

intended purpose only as de-

scribed in this manual.

•The manufacturer cannot be

held liable for damages result-

ing from improper installation or

misuse of the product.

•This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental ca-

pabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand

the hazards involved.

•Children shall not be allowed

play with the appliance. Clean-

ing and user maintenance shall

not be made by children without

supervision.

•The minimum distance between

the supporting surface for the

cooking vessels on the hob and

the lowest part of your product

1

Important safety and environmental instructions

Cooker Hood / User Manual 5 / EN

must be at least 50 cm.

•If the instructions for installation

for the gas hob specify a greater

distance, this has to be taken

into account.

•Make sure that your mains

power supply complies with the

information supplied on the rat-

ing plate of the appliance.

•Never use the appliance if the

power cable or the appliance it-

self is damaged.

•Prevent damage to the power

cable by not squeezing, bending,

or rubbing it on sharp edges.

Keep the power cable away from

hot surfaces and naked flame.

•Use the appliance with a

grounded outlet only.

WARNING: Do not connect the

appliance to the mains until the

installation is fully complete.

•Place the appliance in a way so

that the plug is always accessi-

ble.

•Do not touch the lamps if they

have operated for a long time.

They can burn your hands since

they will be hot.

•Follow the regulations set out by

competent authorities on dis-

charge of the exhaust air (this

warning is not applicable for use

without flue).

•Operate your appliance after

putting a pot, pan etc. on the

hob. Otherwise, high heat may

cause deformation in some parts

of your product.

•Turn off the hob before taking

the pot, pan etc. from it.

•Do not leave hot oil on the hob.

Pans with hot oil may cause self

combustion.

•Pay attention to your curtains

and covers since oil may catch

fire while cooking food such as

fries.

•Grease filter must be cleaned

at least monthly. Carbon filter

must be replaced at least every

3 months.

•Product shall be cleaned ac-

cordance with user manual. If

cleaning was not carried out in

accordance with user manual,

there may be fire risk.

•Do not use non-fire-resistant

filtering materials instead of the

current filter.

1

Important safety and environmental instructions

6 / EN Cooker Hood / User Manual

•Only use the original parts or

parts recommended by the

manufacturer.

•Do not operate the product with-

out the filter and do not remove

the filters while the product is

running.

•In the event of be started any

flame, de-energize your product

and cooking appliances.

•In the event of be started any

flame, cover the flame and never

use water to extinguish.

•Unplug the appliance before

each cleaning and when the ap-

pliance is not in use.

•The negative pressure in the en-

vironment should not exceed 4

Pa (4x10 bar) while the hood for

electric hob and appliances run-

ning on another type of energy but

electricity operate simultaneously.

•In the environment where the

appliance is being used, the ex-

haust of devices running on fuel

oil or gas, such as room heater

must be absolutely isolated or

device must be hermetical type.

•When connecting the flue, use

pipes with a diameter of 120 or

150 mm. Pipe connection must

be as short as possible and have

as few elbows as possible.

Danger of choking! Keep all the

packaging materials away from

children.

CAUTION: Accessible parts may

become hot when used with

cooking appliances.

•The product outlet must not be

connected to air channels that

include other smoke.

•The ventilation in the room may

be insufficient when the hood for

electric hob is used simultane-

ously with the devices operating

on gas or other fuels (this may

not apply to appliances that only

discharge the air back into the

room).

•Objects placed on the product

may fall. Do not place any ob-

jects on the product.

•Do not flambe under the your

product.

WARNING: Before installing the

Hood, remove the protective films.

•Never leave high naked flames

under the hood when it is in op-

eration

1

Important safety and environmental instructions

Cooker Hood / User Manual 7 / EN

1

Important safety and environmental instructions

•Deep fat fryers must be contin-

uously monitored during use:

overheated oil can burst into

flames.

1.2 Compliance with the WEEE

Directive and Disposing of the Waste

Product:

This product complies with EU WEEE Directive

(2012/19/EU). This product bears a classification

symbol for waste electrical and electronic equip-

ment (WEEE).

This symbol indicates that this product

shall not be disposed with other

household wastes at the end of its ser-

vice life. Used device must be returned

to offical collection point for recycling

of electrical and electronic devices. To find these

collection systems please contact to your local au-

thorities or retailer where the product was pu-

chased. Each household performs important role

in recovering and recycling of old appliance.

Appropriate disposal of used appliance helps pre-

vent potential negative consequences for the envi-

ronment and human health.

1.3 Compliance with RoHS Directive

The product you have purchased complies with EU

RoHS Directive (2011/65/EU). It does not contain

harmful and prohibited materials specified in the

Directive.

1.4 Package Information

Packaging materials of the product are

manufactured from recyclable materials

in accordance with our National

Environment Regulations. Do not dis-

pose of the packaging materials together with the

domestic or other wastes. Take them to the pack-

aging material collection points designated by the

local authorities.

8 / EN Cooker Hood / User Manual

2

General appearance

2.1 Overview

596

366

391

350

400

Min:750 Max:1080

395

330

24

80

213

166.5

3421.6.595.13

20

3

2

1

4

5

6

1. Inner chimney

2. Outer chimney

3. Body

4. Grease filter (Behind Glass Cover)

5. Control panel

6. Lighting

2.2 Technical data

Model HCA62640B HCA62640W

Supply voltage & frequency 220-240V ~ 50 Hz

Lamp power 2x3 W

Motor power 210 W

Flow rate – 3. Level 582 m³/h

Insulation class of motor Class F

Insulation class Class I

(Figure 1)

Cooker Hood / User Manual 9 / EN

3

Operation of the appliance

3.1 Controlling the appliance

KEY FUNCTION

A : Light On / Off You may illuminate the cooking area by pressing this button. Re-press the button

to turn off the lamp.

B : 1. Stage Button Operates the appliance on 1st speed. When you press this button again to turn off

the appliance, the screen speed stage turns off.

C : 2. Stage Button Operates the appliance on 2nd speed. When you press this button again to turn off

the appliance, the screen speed stage turns off.

D : 3. Stage Button Operates the appliance on 3rd speed. When you press this button again to turn off

the appliance, the screen speed stage turns off.

3.2 Efficient use in terms of energy saving

•When using your appliance, adjust the speed settings according to vapour and odour intensity, in

order to save energy.

•Use low speeds (1-2) under normal conditions, and high speed (3) for intense odour and vapour.

•The lamps on the hood are placed for illuminating the cooking area.

•Using them for environmental lighting shall cause unnecessary energy expenditure and insufficient

lighting.

•For your device to consume less energy, run it at a low speed level.

•Your device will reduce energy consumption as it will run more efficiently when you provide sufficient

air intake to it.

•Set your device to the intense suction power level before the formation of steam, in cases where you

know that the dense steam will occur. So, you reduce energy consumption by using your device for a

shorter time as it will have a sufficient air intake.

•Keep the lids of the cookware closed to reduce the steam evolving.

3.3 Operation of the hood

•Your appliance contains a motor that has various speeds.

•For better performance, we recommend using low speeds under normal conditions and high speeds

in cases of strong odours and intense vapour.

•You can start your appliance by pressing on the desired speed setting button. (B,C,D)

•You can illuminate the cooking area by pressing the lamp. (A)

10 / EN Cooker Hood / User Manual

3 Operation of the appliance

3.4 Automatic stop

Your appliance has Automatic Stop feature, ena-

bling it to ventilate for a bit more and remove the

unwanted odours and vapour inside the environ-

ment and turn off automatically after the cooking

is done. To enable Automatic Stop feature, press

the any speed stage button (B, C, D) on the control

panel for longer than 2 seconds; the 15-minute

timer function shall be activated. When the au-

tomatic stop feature is active, pressing the same

speed button shall disable the automatic stop

function and the appliance's motor shall stop. This

feature is disables when you switch between dif-

ferent speed stages.

If you want the appliance to stop automatically, you

need to enable the automatic stop feature again.

3.5 Replacement of lamp

MAX 3 W

(Figure 3)

Make the electrical connections of the appliance.

Your appliance uses 3W spot LED lamp. For re-

placing the lamps, push downwards on the holder

from its behind, turn it counter-clockwise, and take

it out downwards. Apply the above operation in re-

verse to install new lamps.

Bulb

Bulb power 3 W

Holder / Socket GZ 10

Bulb voltage 220 - 240 V

Size 53x50 mm

ILCOS Code DR/F3-220-240-GZ10-50-53

Luminous flux 260 lm

Correlated colour

temperature

3000 K

This product contains a light source of energy ef-

ficiency class “F”.

3.6 Operation with flue connection

•Vapour is extracted through the

flue duct, which is fastened to

the connection head on the

hood.

•The diameter of the flue duct must be the same

as the connection ring. In horizontal settings, the

pipe has to have a slight upward slope (around

10º) so that the air can exit the room easily.

3.7 Operation without flue

connection

•Air is filtered through the carbon

filter and recirculated in the

room. Carbon filter is used

when it is impossible to use a

flue in the house.

•In flueless use, remove the flaps inside the flue

adapter.

•Remove the grease filter. To install the carbon

filter, fit the filter to the tabs by centring it on

the plastic piece on both sides of the fan body.

Tighten it by turning right or left.

•Replace grease filter.

Cooker Hood / User Manual 11 / EN

4 Cleaning and maintenance

The device should be cleaned and maintained

regularly. Failure to keep the device clean will

adversely affect the service life of the device. For

cleaning and maintenance, follow the instructions

stated in the manual.

CBefore cleaning and maintenance,

unplug the product or turn off the

switch.

Non-compliance with the provisions

associated with the cleaning of the

device and replacement of the filters

may result in a risk of fire. Therefore,

it is recommended to follow the

guidelines stated here. The man-

ufacturer is not responsible for the

engine damages or fires originating

from the improper use.

4.1 Cleaning of the grease filter

Grease filter retains the oil particles in the air.

Grease filters may change colour after repeated

cleaning. This is normal and does not require re-

placement of filters.

(Figure 4)

•Push the grease filter lock forward.

•Then pull it slightly down and pull it out (Figure

4). Otherwise, you can bend the filter. Wash and

rinse grease filters with liquid detergent and

replace grease filters to their sockets by by car-

rying out the steps specified above in reverse

order. This filter retains the oil particles in the air.

CYou may wash your grease filters in

the dishwasher.

ACAUTION: In case of normal use,

clean your filter once in a month.

4.2 Replacement of carbon filters

Odour removing filters contain charcoal (Active

carbon). Grease filters must be installed in the

product, regardless of whether or not carbon fil-

ters are used.

(Figure 5)

•Remove the grease filter.

•To remove the carbon filter, remove the car-

bon filter from its housing by rotating it coun-

ter-clockwise from the tab (Figure 5).

•Install the new carbon filter.

•Install the grease filter.

A

CAUTION

•Carbon filter shall never be

washed.

•Replace carbon filters once every

3 months.

•You can obtain the carbon filter

from the authorized services.

12 / EN Cooker Hood / User Manual

AWARNING: Before starting the in-

stallation, read the safety informa-

tion on User Manual.

AWARNING: Failure to install with

screws and stabilizers in accordance

with these instructions may result in

electric shock.

For the installation of the hood, please contact the

nearest Authorized Service.

It is the customer's responsibility to prepare the

location and electrical installation of the hood.

5.1 Position of the appliance

(Figure 6)

•In all cooker hood types, the installation distance

on Gas hob and Electric hob is min. 650 mm.

For inclined cooker hoods only, the installa-

tion distance on the electric hob is min 500

mm.

•Distance must be measured from the surface of

grate for gas cookers, from surface of glass for

electric cookers.

5.2 Installation accessories

1

5

9 10 11 12 13 14 15

6 7 8

2 3 4

1. Product

2. Inner chimney

3. Outer chimney

4. Chimney connection plate

5. User manual

6. Assembly pattern

7. 2x Ø6mm plastic dowel

8. 4x Ø8mm plastic dowel

9. 4x 4.8x50 wall mount screw

10. 2x 3.9x22 chimney connection plate screw

11. 4x 3.5x9.5 chimney connection screw

12. 2x 3.5x9.5 blunt-ended screw

13. Chimney clamp

14. 150mm plastic chimney adapter

15. 150/120 Plastic chimney adapter

The information required to make the location suit-

able for the installation of the hood is given below.

5.3 Wall mounting

•Wall must be flat, straight and have the suffi-

cient bearing capacity.

5 Installation of appliance

Cooker Hood / User Manual 13 / EN

•Depth of drilling holes must comply with the

length of bolts.

•The bolts and dowels provided are suitable for

brick walls. For other construction material (e.g.

drywall, plate, porous concrete), suitable fixing

dowels and nuts shall be used.

(Figure 7)

ACAUTION: Before drilling, ensure

that there are no power, gas or wa-

ter pipes in the close proximity of the

drilling locations.

Draw a mid location line from the ceiling perpen-

dicular to the lower edge of the hood.

Paste the installing template provided within the

accessories on the surface where the hood is to

be mounted. In doing this operation, observe the

mounting height of the hood (Figure 6).

There is a tab in the middle of the flue connection

plate. Place the middle point of this tab on the line

that is drawn perpendicular to the wall. In doing

this operation, adjust the hood according to the

maximum height (Figure 1). Mark the holes where

the flue connection plate will be mounted with the

help of a pen (Figure 7/a).

Drill the marked points with Ø6mm drill and in-

sert 2 plastic dowels in the drilled holes (Figure

7/a). Fix the flue connection plate to the wall with

3,9x22 screws (Figure 7/a).

To assemble the hood body, you can use the

Ø8mm drill bit to drill points A, B, C, D on the as-

sembly template, and insert 4.8x50mm plastic

dowels at these points. (Figure 7/b).

2 piece 4.8x50 suspension screw with a clearance

of 5 mm between the screw head and the wall

(Figure 7/b).

(Figure 8)

1. Hanger plate

2. Hanging plate connection screw

In order to install your hood to the wall, loosen the

screws on the hanger plates mounted on the mo-

tor cabin and pull them up, and then fasten again

(Figure 8 / A).

Turn on the suction glass of the hood and remove

the grease filter (Figure 4).

(Figure 9)

Attach the 150mm plastic chimney adapter in-

cluded in the package to the product body with

5 Installation of appliance

14 / EN Cooker Hood / User Manual

5 Installation of appliance

Insert the plastic pin (Figure 11 / area no. 2) on

the pin socket on the motor exhaust (Figure 11 /

area no.1). Then bend the flap lightly to insert the

other pin on the flap and insert the other pin to its

socket (Figure 11).

If you are going to use the Ø 120/150 mm plastic

flue adapter, connect one end of the pipe to this

adapter, if you are not going to use it, to the direct

output on the product. Connect the other end of

the pipe to your flue. Check that these two con-

nections are tight enough so they will not come out

when the appliance runs on full power. Ensure that

the flaps inside the flue work when tightened with

clamp. Connect the flue connection duct outside

the adapter (Figure 12/a). If the connection duct

is fitted inside the adapter, suction of air shall not

occur as the flue flap that prevents the return of air

will remain closed (Figure 12 / b). The length of the

pipe connection as well as the number of elbows

must be as minimum as possible.

A : Flue exit pipe

B : Flue clamps

C: Plastic flue

The valves are closed then the appliance is not

operating and prevent possible outside odour and

dust from entering inside.

(a)

OK Not OK

(b)

Suitable Not Suitable

(Figure 12)

3.5x9.5 blunt-ended screws. If the air outlet is

to be connected to the air discharge duct smaller

than 150mm, install the 150 / 120mm plastic flue

adapter (Fig. 9).

(Figure 10)

Hold the cooker hood by its body and place it on

the mounting screws on the wall and tighten the

screws (Figure 10).

Secure the cooker hood with two 4.8x50 screws to

the wall through the mounting hole on the interior

of the appliance (Figure 10).

5.4 Connecting to flue

(Figure 11)

1. Flap pin socket

2. Flap pin

Cooker Hood / User Manual 15 / EN

5 Installation of appliance

5.5 Installation of the hood to the

flue

Make the electrical connection of your hood be-

fore starting the installation of the flue. Slip the

flue plates around the body. Screw the flue to the

flue fastening plates available on the motor cabin.

(Figure 13).

Install the flue to the flue fastening plate that is

secured to the wall from its upper outer edges

(Figure 13).

(Figure 13)

5.6 Storage

•If you do not intend to use the appliance for a

long time, please store it carefully.

•Please make sure that the appliance is un-

plugged, cooled down and totally dry.

•Store the appliance in a cool and dry place.

•Keep the appliance out of the reach of children

5.7 Handling and transportation

•During handling and transportation, carry the

appliance in its original packaging. The packag-

ing of the appliance protects it against physical

damages.

•Do not place heavy loads on the appliance or

the packaging. The appliance may be damaged.

•Dropping the appliance will render it non-opera-

tional or cause permanent damage.

16 / EN Cooker Hood / User Manual

6 Troubleshooting

Troubleshooting Root Cause Help

Appliance is not working. Check your fuses. Fuse may be blown, inspect and re-

store it.

Appliance is not working. Check the electrical connection. Mains voltage shall be between 220

and 240 V.

Appliance is not working. Check the electrical connection. Check if other appliance in your

kitchen operate.

Illumination light does not operate. Check the electrical connection. Mains voltage shall be between 220

and 240 V.

Illumination light does not operate. Inspect the lamp switch. Lamp switch shall be at "on" position.

Illumination light does not operate. Inspect the lamps. The lamps of the appliance shall il-

luminate.

Air inlet of the appliance is inad-

equate. Inspect the grease filter. Under normal operating conditions,

grease filter shall be cleaned at least

once in a month.

Air inlet of the appliance is inad-

equate. Check the air discharge flue. The air discharge flue shall be at “on”

position.

Air inlet of the appliance is inad-

equate. Inspect the carbon filter. The filters of the appliances with car-

bon filters shall be replaced once in

every 3 months under normal condi-

tions.

¡Lea el manual de usuario antes de utilizar el aparato!

Estimado cliente:

Gracias por elegir un aparato Beko. Esperamos que obtenga los mejores resultados

de su aparato, ya que ha sido fabricado con gran calidad y con tecnología de última

generación. Por esta razón, le aconsejamos que lea este manual de usuario y todos los

demás documentos adjuntos con atención antes de utilizar el aparato y que los guarde

para futuras consultas. Si entrega este aparato a otra persona, proporciónele también

el manual de usuario. Siga las instrucciones prestando especial atención a toda la

información y advertencias incluidas en el manual de usuario.

Recuerde que este manual de usuario también puede servir para otros modelos. En el

manual se describen las diferencias entre los modelos explícitamente.

Significado de los símbolos

Los siguientes símbolos se usan en las diversas secciones del presente manual de

usuario:

CInformación importante y consejos útiles sobre

su uso.

AADVERTENCIA: Advertencias de situaciones

peligrosas sobre la seguridad de las personas

y la propiedad.

ADVERTENCIA: Advertencia de peligro de in-

cendio.

BADVERTENCIA: Advertencia sobre posibles

descargas eléctricas.

18 / ES Campana de cocina / Manual de usuario

1

Instrucciones importantes para la seguridad y el

medio ambiente

1.1 Seguridad general

Lea las instrucciones importantes

de seguridad y guárdelas para su

futura consulta

Esta sección contiene instruccio-

nes de seguridad que ayudarán

a la protección contra los riesgos

de incendio, descargas eléctri-

cas, exposición a la energía de

microondas, lesiones personales

o daño a la propiedad. El incum-

plimiento de estas instrucciones

anulará cualquier tipo de garantía.

•Los productos Beko cumplen

con todas las normas de se-

guridad aplicables; por ello, si

el cable o el aparato presentan

daños, deberán ser reparados o

sustituidos por el distribuidor, un

servicio técnico o una persona

cualificada y autorizada para evi-

tar cualquier peligro. Los traba-

jos de reparación deficientes o

realizados por personal no cua-

lificado puede ser peligrosos y

entrañar riesgos para el usuario.

•Este aparato está destinado al

uso doméstico y aplicaciones

parecidas, como por ejemplo:

– Cocinas para uso del perso-

nal de tiendas, oficinas y otros

entornos laborales;

– Casa rurales;

– Por clientes en hoteles o

cualquier otro tipo de entorno

residencial;

– Entornos de tipo «Habitación

y desayuno» (Bed and Break-

fast).

•Utilice este aparato únicamente

para su uso previsto, tal como se

describe en este manual.

•El fabricante no se hace respon-

sable de los daños provocados

por una instalación incorrecta o

un uso inapropiado del producto.

•Este aparato puede ser utilizado

por niños mayores de 8 años

y por personas con capacida-

des físicas, sensoriales o men-

tales reducidas o con falta de

experiencia y conocimientos,

siempre que estén bajo super-

visión o hayan recibido instruc-

ciones pertinentes sobre el uso

del aparato de manera segura

y comprendan los peligros que

conlleva.

Campana de cocina / Manual de usuario 19 / ES

•No deje que los niños jueguen

con el aparato. La limpieza y

mantenimiento del usuario no

deben ser realizados por niños

sin supervisión.

•La distancia mínima entre la

superficie de soporte de los

recipientes para cocinar en los

fogones y la parte más baja de

su aparato debe ser de al menos

50 cm.

•Si en las instrucciones de ins-

talación de la placa de gas se

indica una distancia superior,

deberá tenerse en cuenta este

hecho.

•Asegúrese de que la fuente de

alimentación cumpla con la in-

formación que se indica en la

placa de datos del aparato.

•Nunca utilice el aparato si está

dañado el cable de alimentación

o el mismo aparato.

•Evite daños al cable procurando

que no sufra tirones, no se doble

y no roce con bordes afilados

para evitar dañarlo. Mantenga

el cable de corriente alejado de

superficies calientes y llamas

descubiertas.

•Use el aparato únicamente con

un enchufe con toma a tierra.

ADVERTENCIA: No conecte el

aparato a la red eléctrica antes de

que la instalación se haya realiza-

do por completo.

•Coloque siempre el aparato de

forma que el enchufe quede a

mano.

•No toque las lámparas si han es-

tado en funcionamiento durante

mucho tiempo. Pueden ocasio-

nar quemaduras en las manos

ya que estarán calientes.

•Siga las normas establecidas

por las autoridades competen-

tes para la descarga del aire de

salida (esta advertencia no es

aplicable sin la conexión de la

chimenea).

•Encienda el aparato después de

colocar una olla, una sartén, etc,

en los fogones. De lo contrario,

las altas temperaturas pueden

provocar deformaciones en al-

gunas partes del aparato.

•Apague los fogones antes de re-

tirar las ollas, los sartenes, etc.

1

Instrucciones importantes para la seguridad y el

medio ambiente

20 / ES Campana de cocina / Manual de usuario

•No deje aceite caliente en los fo-

gones. Las sartenes con aceite

caliente pueden ocasionar auto-

combustión.

•Preste atención a las cortinas y

los estores, ya que, al cocinar

platos como patatas fritas, el

aceite puede originar un incen-

dio.

•El filtro antigrasa se debe reem-

plazar por lo menos una vez al

mes. El filtro de carbón se debe

reemplazar por lo menos cada 3

meses.

•El producto se debe limpiar si-

guiendo las instrucciones del

manual de usuario. Si la lim-

pieza no se ha llevado a cabo

siguiendo el manual de usuario,

puede haber riesgo de incendio.

•No use materiales filtrantes que

no resistan el fuego en vez del

filtro actual.

•Utilice únicamente accesorios

originales o bien los que reco-

miende el fabricante.

•No use el aparato sin el filtro y

no retire los filtros mientras el

aparato esté en funcionamiento.

•En caso de fuego, desactive su

producto y los aparatos de co-

cina.

•En caso de fuego, cubra la llama

y nunca utilice agua para apa-

garlo.

•Desenchufe el aparato antes de

cada limpieza y cuando no esté

en uso.

•La presión negativa de la estan-

cia no debe superar los 4 Pa (4 x

10 bar) cuando la campana para

una placa eléctrica funcione si-

multáneamente con dispositivos

de otro tipo de energía excepto

la electricidad.

•En la estancia en donde se en-

cuentra el aparato, el escape de

equipos de combustible o gas,

como calefactores, deben ser

herméticos o estar absoluta-

mente aislados.

•Para la conexión de la chimenea,

use tuberías de 120 o 150 mm

de diámetro. La conexión de las

tuberías debe ser lo más corta

posible y tener la menor canti-

dad de codos de tubería.

1

Instrucciones importantes para la seguridad y el

medio ambiente

Stránka sa načítava ...

Beko HCA62640B Používateľská príručka

Beko HCA62640B Používateľská príručka

V iných jazykoch

Súvisiace články