20
Display
When power on the refrigerator for the 1st time, the whole display panel will shine for
3 seconds. Then the display panel enters the normal display. The rst time for using the
refrigerator,the default set temperatures of refrigerating chamber, freezing chamber is
5° C/-18 °C respectively.
Whentheerroroccurs,thedisplaypanelshowstheerrorcode(seenextpage);during
normal running, the display panel shows the set temperature of refrigerating chamber,
freezing chamber.
Under normal running, if there is no operation or opening door action within 30s, the
display panel will be locked,the light of display panel will go out after the locked state
continued for 30s.
Lock/unlock
In the unlock state, long press the lock button for 3 seconds, enter the lock state,
the icon lights up and buzzer sounds, it means the display panel is locked, at this
time, button operation cannot be implemented;
In the lock state, long press the lock button for 3 seconds, enter the unlock state,
the icon goes out and buzzer sounds, it means the display panel is unlocked, at this
time, button operation can be implemented.
Temperature setting of refrigerating chamber
Click the button to change the set temperature of refrigerating chamber, each
click of temperature adjusting button of the refrigerating chamber, the set temperature
will be reduced 1 °C. The temperature setting range of refrigerating chamber is 2~8 °C.
When the set temperature is 2 °C,
Temperature setting of freezing chamber
Click the button to change the set temperature of freezing chamber, each click
of temperature adjusting button of the freezing chamber, the set temperature will
be reduced 1 °C. The temperature setting range for freezing chamber is -24- -16 °C.
When the temperature is -24 °C, click the button again, the set temperature of freezing
chamber will switch to -16 °C.
Mode setting
Quick cool mode
Long press the button for 3s to set Quick cool mode, the icon lights up. The
refrigerating chamber temperature displays 2 °C, it enters the Quick cool mode.
Under Quick cool mode, press and hold button for 3 seconds or press briey,
the icon goes out, it exits Quick cool mode. The set temperature of refrigerating
chamber will automatically switch back to set temperature before.