Philco PGG 75 W Návod na obsluhu

Typ
Návod na obsluhu
UNIVERSAL USER'S MANUAL FOR
PHILCO GAS COOKTOPS
Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user's manual.
EN - 1
03/2012Copyright © 2012, Fast ČR, a. s.
CONTENTS
PART 1: SAFETY PRECAUTIONS ...................................................................................................................... 2
PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 4
PART 3: INSTALLATION .................................................................................................................................... 6
PART 4: USING THE COOKTOP ........................................................................................................................ 7
 Igniting a burner .............................................................................................................................................................................8
 Tips for using the cooktop ...........................................................................................................................................................8
PART 5: MAINTENANCE AND CLEANING ........................................................................................................ 9
PART 6: BEFORE YOU CALL THE SERVICE CENTRE ....................................................................................... 11
PART 7: INSTRUCTIONS FOR THE TECHNICIAN ............................................................................................ 12
 Gas connection .............................................................................................................................................................................12
 Electrical connection ..................................................................................................................................................................13
 Installing the cooktop ................................................................................................................................................................14
 Built-in options ............................................................................................................................................................................. 16
PART 8: TECHNICAL SPECIFICATIONS ........................................................................................................... 17
EN - 2
03/2012Copyright © 2012, Fast ČR, a. s.
PART 1: SAFETY PRECAUTIONS
Important safety instructions
Recommendation:
Carefully read these instructions before installing and using this cooktop.
Write down the serial number found on the rating label of the cooktop in the space below. It is essential that
you store this user's manual in a safe place so that you can use it in the future. If you intend to sell the appliance,
give it to another owner, or if you move, always make sure that the user's manual is attached to the appliance,
so that the new owner can learn about the operation of the appliance and the relevant warnings.
SERIAL NUMBER:
Important Notices:
 This appliance must not be used by persons (including children) with physical or mental impairments
or by inexperienced persons, unless properly trained or schooled in the safe use of the appliance, or
unless they have been properly supervised by a quali ed person who will be responsible for their
safety. Children must be supervised to ensure that they do not play with the appliance.
 This appliance may only be used by adults or children under constant adult supervision.
 Small children must not play with any part of the appliance or play near the appliance.
 Accessible parts of the appliance may heat up during operation to a high temperature. Children
should not approach the appliance until it cools down. Children could also be injured when pulling
cookware from the appliance.
Installing the Appliance
 Remove all advertising and packaging materials before installing the appliance. Dispose of them
according to regulation in force in a given country. Then check that the appliance is not damaged in any
way, including the power cord.
 The installation and the important installation steps must only be carried out by a quali ed technician or
an approved person in accordance with the rules and regulations in force in a given country.
 Make sure that the area around the appliance is well ventilated. An insu cient air supply may lead to an
insu cient amount of oxygen.
 Check that the electrical and gas connection conforms to the gas and electrical current type shown on the
rating label, which as a rule is located near the gas supply pipe.
 This appliance is not supplied with a connection to a waste gas exhaust device. So it is necessary for it to
be installed and connected according to valid installation codes, especially ensuring su cient ventilation
of the room where the appliance is to be installed.
 If you wish to connect a di erent electrical appliance to a power socket near the appliance, ensure that the
power cords do not touch each other. Place both power cords at a su cient distance from the appliance.
 We recommend that the appliance is connected to an independent circuit and an independent power
socket.
 When using the gas cooking appliance, excessive heat and moisture may form in the room where
the appliance is installed. Therefore ensure that the kitchen is equipped with proper ventilation:
keep natural ventilation openings open or install a mechanical ventilation device (mechanical fume
extraction device).
 Long term intensive use of the appliance may require additional ventilation, e.g. by opening
a window or increasing the power setting on the mechanical ventilation device (if one is installed).
EN - 3
03/2012Copyright © 2012, Fast ČR, a. s.
Operating the Appliance
 This appliance is designed for cooking meals in a household. Do not use the appliance in a non-domestic
environment or for purposes other than those for which it was designed.
 Tampering with and adjusting or modifying the appliance without the express approval of the manufacturer
or an authorised representative may lead to the warranty becoming void, loss of the appliance, damage to
property and last but not least serious health damage to people.
 For hygiene and safety reasons regularly clean the appliance. Accumulated food residues may result in
a  re hazard.
 Do not use the appliance if water has spilled on it. First remove the water and check that the cooktop
surface is clean.
 Do not use the appliance if you have wet or damp hands.
 Do not leave the appliance without supervision if it is in operation especially when cooking with oil and
fats.
 Only use quality cookware. Do not use unstable or deformed cookware as it could tip over and brake and
so cause injury or damage to property.
 Do not use plastic or aluminium containers or aluminium foils or place them on the surface of the appliance.
 Do not store foods that spoil, plastic containers and sprays above or below the appliance as the heat from
the cooktop could damage them.
 After  nishing cooking food, turn o the hotplates. Check that all the hotplates are turned o .
 Do not use the appliance as a workbench. Do not place any items on the appliance, excluding cookware
suitable for use with the appliance.
Maintenance and Repair
 Prior to performing maintenance, cleaning, moving or if you will not be using the appliance for a long time,
check that all the hotplates are turned o , then disconnect the power cord from the power socket and shut
o the gas supply (on models with a gas burner).
 Do not disconnect the power cord by pulling on the power cord. Always disconnect it by pulling on the
power plug.
 Clean the appliance in accordance with the instructions contained further in this user's manual.
 Before cleaning the appliance, allow it to cool down. The residual heat indicator lights will show you
whether the hotplates have cooled down.
 Do not use petrol, benzene, thinners or any other solvents for cleaning. Do not use coarse cleaning agents,
steel wool or sponges with steel wool.
 Do not use steam cleaners to clean the appliance.
 Never place containers made from plastic or aluminium foil on the appliance. They could heat up as
a result of the heat and damage the appliance. If this occurs it is necessary to immediately scrape the melt
away while it is still hot and then wipe it o so that the surface is not damaged. You can, in the same way,
remove sugar or food residue with a high sugar content using the scraper specially designed for this type
of appliance.
 Keep the appliance in a clean condition. In this way you will extend its lifetime.
 Perform regular maintenance of the appliance and check the power cord. If the power cord is damaged,
turn o the appliance and contact an authorised service centre. Do not use an appliance with a damaged
power cord or an appliance displaying signs of damage. The power cord may only be replaced by
authorised and professional personnel.
 Do not attempt to repair the appliance yourself. Repairs carried out by untrained persons may lead to
injuries or serious damage to the appliance. Contact a local service centre.
 If components need to be replaced, ensure that the service technician uses spare parts directly from the
manufacturer or recommended by the manufacturer.
 The appliance is resistant against impact, but it is not indestructible! Hard or sharp items falling on to the
appliance from a height may damage it. If you  nd any scratches or cracks, disconnect the power cord from
the power socket so that the danger of injury by electrical shock is eliminated and contact an authorised
service centre.
EN - 4
03/2012Copyright © 2012, Fast ČR, a. s.
PART 2: DESCRIPTION OF APPLIANCE
30 cm Inox – Glass 30 cm Inox 2E 40 cm Glass 2G1W
60 cm Inox – Glass 2G2E 60 cm Inox – Glass 3G1E
60 cm Inox – Glass 60 cm Inox – Glass 3G1E
EN - 5
03/2012Copyright © 2012, Fast ČR, a. s.
70 cm Inox 70 cm Glass 60 cm Inox – Glass
90 cm Inox – Glass 90 cm Glass
120 cm Glass
90 cm Glass 4G1E
P1) Fast burner P3) Auxiliary burner P5) Hotplate Ø145
P2) Medium fast burner P4) Hotplate Ø180 P6) Wok burner
S1) Auxiliary burner control dial S3) Fast burner control dial
S2) Medium fast burner control dial S4) Wok burner control dial
S5) Hotplate Ø145 control dial
S6) Hotplate Ø180 control dial
EN - 6
03/2012Copyright © 2012, Fast ČR, a. s.
PART 3: INSTALLATION
All gas appliance installations must be performed by a quali ed personnel in accordance with the codes
and regulations in force.
Important installation instructions are included further on in the manual.
Make sure that for the event of a malfunction the appliance is installed in such a way that it is easily accessible
for the service technician.
NOTE:
Neither the manufacturer nor the vendor take any responsibility for damage arising from not adhering
to safety and installation instructions contained in this manual and not adhering to the codes valid in
a given country.
After installing the appliance remove all protective and advertising labels.
EN - 7
03/2012Copyright © 2012, Fast ČR, a. s.
PART 4: USING THE COOKTOP
After completing the installation check that the appliance is installed in accordance with the here contained
instructions and valid codes, or request that a quali ed technician performs a test ignition of all burners
and inspects all hotplates so as to check for gas leaks from the gas pipes and whether the electrical wiring is
connected properly.
NOTE:
To achieve the maximum e ciency of a burner, it is necessary to only use pots and pans which are suitable
for the given cooktop type, the diameter of which corresponds to the size of the respective burner. In this
way you will prevent the  ame from extending past the bottom edge of the cookware.
Suitable cookware
Use cookware with a diameter of 12 – 18 cm on the smaller hotplate / burner.
Use cookware with a diameter of 24 – 28 cm on the larger hotplate / burner.
Symbols on the control panel
Symbol Meaning
No gas supply
Maximum gas supply
Minimum gas supply
CAUTION!
Before igniting a burner or placing pots or pans on it, check that the protective grill is in its place, it
is clean and the rubber washers are properly attached.
EN - 8
03/2012Copyright © 2012, Fast ČR, a. s.
Lighting a burner
Automatic ignition
Press and hold down the respective control dial. Then release the control dial and turn it clockwise until the
symbol indicating the ignition of the respective hotplate / burner comes on, e.g. .
If the burner does not ignite automatically or if there is an electrical power outage, hold down the control dial
until a  ame appears. Then release the control dial and turn it anticlockwise to adjust the  ame.
Adjust the  ame by turning the control dial between the maximum and minimum gas supply symbols.
Turn it clockwise to turn o the  ame.
NOTE:
Some cooktop models are equipped with an automatic gas supply shut o function which is activated
when the burner is suddenly blown out by a breeze, over owing pot contents or a gas supply interruption.
NOTE:
If the  ame cannot be ignited even after several attempts, check whether the burner "cover" and the
"crown of the burner" are in the correct position.
NOTE:
If an electrical power outage occurs, it is possible to light the burner even without the electrical device.
Place a  ame next to the burner, press the respective control dial and turn it to the maximum position.
CAUTION!
Keep the burner control dial pressed down for a maximum of 15 seconds. If the burner does not
ignite even after 15 seconds, release the control dial, turn it to position and wait at least one
minute, and only then attempt to ignite it again. If for some reason the  ame goes out, turn the
control dial to position , wait at least one minute and only then attempt to ignite the burner
again.
Tips for using the cooktop
 As soon as water or another liquid starts to boil, turn down the  ame so that it only simmers.
 Only use pots and pans with a  at bottom.
 If you use a pot or pan the base of which is smaller than the size of the burner (crown of the burner), the
ame will reach past the base perimeter and may cause the handle to overheat.
 Take care when cooking meals containing fat or oil as these meals could overheat and subsequently cause
a  re.
 It is not recommended to cook meals in cookware made from stone, soapstone or on cast iron plates. Do
not use aluminium foil to protect the surface of the cooktop.
 To achieve a lower gas consumption, place the pot or pan in the middle of the circle.
 Do not use unstable or deformed pots and pans as they could tip over, the contents could spill and in this
way this could cause an accident.
 Neither pots nor pans may extend past the zone with the control dials.
 If it becomes hard to turn the control dial, or if the appliance is malfunctioning, turn o all the control dials,
disconnect the power cord from the power socket and contact an authorised service centre.
EN - 9
03/2012Copyright © 2012, Fast ČR, a. s.
PART 5: MAINTENANCE AND CLEANING
Prior to maintenance or cleaning it is necessary to disconnect the power cord from the power socket and
to turn o the gas supply.
If the cooktop is hot then wait several minutes until it cools down. It is easier to remove food residues from the
surface while the surface is still slightly hot.
NOTE:
No part or accessory of the appliance is designed for washing in a dishwasher.
Clean the appliance after every use. Not only will maintenance be faster and easier, but this will also
extend the lifetime of the appliance.
Do not use sharp utensils or items to remove food residues.
Regular maintenance
The appliance must be inspected regularly. The technician who installed the cooktop or an authorised service
centre will inspect the gas supply and pressure setting (if the appliance is equipped with one).
Protective grills
Protective grills are mounted on metal pins (depending on the model), located on the sides of the cooktop to
ensure they are in correct position. To clean them better, you may remove the grills from the cooktop. Hold the
grills in a horizontal position and lift them upwards.
CAUTION!
Do not lift up the grills at an angle as this could apply too much force to the metal pins. The pins
could be damaged and crack.
Wash the protective grills in warm water with a small amount of kitchen detergent. To remove stubborn stains
you may also use a cleaning paste. Rinse and wipe dry.
Horizontally attach the protective grill on to the cooktop. While attaching it, take care not to scratch the surface
of the cooktop. Check that the grills are properly attached before using the appliance.
EN - 10
03/2012Copyright © 2012, Fast ČR, a. s.
Cooktop
Regularly wipe the surface of the cooktop with a soft sponge lightly dipped in water with a small amount of
kitchen detergent. Wipe dry using a clean wiping cloth.
Do not use steel wool, sponges with steel wool, petrol, benzene, thinners or any other solvents and similar
compounds, domestic cleaning agents and bleaches, sink stain removers, etc.
If the surface of the cooktop is very dirty, use special cooktop cleaning agents based on the surface type of
the cooktop.
CAUTION!
If cracks appear on the appliance, disconnect the appliance from the power socket and shut o the
gas supply so that injury by electrical shock cannot occur and contact an authorised service centre.
Do not place any items which could melt (plastics, aluminium foil) on the cooking surfaces.
Burners
The cover and crown of the burner can be removed for the purpose of maintenance and cleaning.
Wash the cover and crown of the burner in warm water with a small amount of kitchen detergent. Rinse and
wipe dry. You can use a gentle cleaning paste or even steel wool to clean away deposits.
Ignition electrode
If you are using a model with electrical ignition, which is performed by means of a ceramic and metal electrode,
it is necessary to constantly maintain the ignition components clean so that the burner ignites easily. Therefore
regularly check that the holes in the crown of the burner allow gas to pass through.
On models with ventilation also regularly clean the ventilation opening, which provides for the air ow
necessary for igniting the burner.
NOTE:
Do not use the burner or the entire appliance unless the burner is correctly assembled.
EN - 11
03/2012Copyright © 2012, Fast ČR, a. s.
PART 6: BEFORE YOU CALL THE SERVICE CENTRE
If the appliance is not working as it should, read the instructions below, which may help you  x the problem
before calling the service centre.
If the problem persists or it is not included in the table below, stop using the appliance, check that all control
dials are turned o , disconnect the power cord from the power socket and contact an authorised service centre.
Under no condition should you repair the appliance yourself.
Problem Solution
A spark is not present
during ignition.
Check that the power plug is properly inserted into the power socket.
Check that there is electrical power in the power socket with the help of
another working electrical appliance.
Check that the main safety control dial is not loose, if the appliance is
equipped with one.
Check whether the fuse has not burned out.
Check that the burner is correctly assembled, especially the crown and the
cover.
Uneven  ame Check that the main jet is not clogged, or that there are no food remains in
the cover or crown of the burner.
Check that the burner is correctly assembled, especially the crown and the
cover.
The burner does not
ignite.
Check that the burner is correctly assembled, especially the crown and the
cover.
EN - 12
03/2012Copyright © 2012, Fast ČR, a. s.
PART 7: INSTRUCTIONS FOR THE TECHNICIAN
CAUTION!
Installation and maintenance may only be performed by quali ed personnel in accordance with
valid codes.
The appliance must be disconnected from the power supply before any action is taken. If an
electrical connection is necessary for the performance of work, ensure that all necessary safety
precautions are adhered to.
The side walls of cabinets into which the cooktop is to be installed must not extend past the height
of the workbench.
Do not install the appliance near  ammable materials such as for example curtains, drapes, etc.
CAUTION!
NEITHER THE MANUFACTURER NOR THE VENDOR TAKE ANY RESPONSIBILITY FOR DAMAGES
ARISING FROM NOT ADHERING TO SAFETY AND INSTALLATION INSTRUCTIONS CONTAINED IN
THIS MANUAL AND NOT ADHERING TO THE CODES VALID IN A GIVEN COUNTRY.
Gas connection
For the gas connection you may choose either rigid connections or a  exible hose from stainless steel
conforming to valid codes in force.
If you do use a  exible metal hose, it is important that the hose nowhere touches any moving parts and that it
is not crimped anywhere. The same measures must apply when the cooktop is combined with an oven.
CAUTION!
To ensure correct operation, energy savings and a long lifetime of the appliance it is necessary that
the voltage and pressure of the appliance conforms to the recommended values. The adjustable
connection is attached to a complete ramp using nuts with a G 1/2" thread.
Screw on the parts without using excessive force. Set the connection in the required direction and tighten.
When using  exible non-metallic hoses
Use a  exible hose that conforms to valid regulations, if it is possible to perform a complete inspection of the
connection. The hose must be  rmly attached using clamps in accordance with valid regulations.
Always seal with an end nut and an adjustable connection. Then continue with the gas connection.
The hose must be prepared for use as follows:
it must not be longer than 1500 mm.
it must be easily accessible for easy inspection of its condition.
it must not overheat, the temperature must not exceed room temperature (30°C).
in must not be exposed to torsion or tensile forces and it must not be crimped.
it must not be in contact with sharp corners or edges.
EN - 13
03/2012Copyright © 2012, Fast ČR, a. s.
When inspecting a  exible hose, check whether:
it has any tears, cuts or signs of burning.
the connecting clamps are causing cuts.
the material is elastic, it must not be brittle.
its lifetime has expired.
If you identify any of the above signs, do not repair the hose, replace it instead.
It is important to install pipes correctly. Incorrect installation may cause gas leaks.
CAUTION!
After completing the installation, check that every pipe joint seals perfectly by using a soap
solution.
NEVER USE A FLAME TO CHECK FOR GAS LEAKS!!!
Electrical wiring connection
Connect the appliance to a single-phase electrical power supply with a voltage of 230 V. Before connecting
the appliance, check that the voltage on the appliance's rating label corresponds to the voltage in your power
socket.
The connection must be carried out in accordance with valid laws and regulations.
Before connecting this appliance, check that:
the power supply is properly grounded according to valid codes.
the main fuse and the domestic electrical wiring correspond to the given load (see rating label).
the wall socket or bipolar switch used for the electrical connection are easily accessible even after the
appliance is built-in to the cabinet.
The appliance is supplied with a power cord equipped with a proper power plug suitable for the given load
marked on the rating label. The plug must be inserted into a properly grounded power socket.
If you will be connecting the appliance directly to the electricity grid it is necessary to install a bipolar switch
between the appliance and the grid with a minimum distance between contacts of 3 mm. This switch must
correspond to the required load in accordance with valid codes.
Do not use an adapter to connect the appliance to a mains power socket.
EN - 14
03/2012Copyright © 2012, Fast ČR, a. s.
The power cord must be located in such a way that at no point can its temperature exceed 90 °C.
The brown phase lead (connected to the terminal box to the contact marked with the letter "L") must always
be connected to the phase in the grid.
If you will not be using the appliance for a longer period of time, before cleaning, maintenance, moving, etc.,
remove the power plug from the power socket to prevent overheating or a  re hazard.
NOTE:
The manufacturer takes no responsibility for damage or injury caused by incorrect installation,
unprofessional, incorrect or inappropriate use of the appliance.
If the power cord is damaged, do not use the appliance, disconnect it from the power socket and have the
power cord replaced at an authorised service centre or by a quali ed person. The replaced power cord
must correspond to the parameters designated by the manufacturer (T90°C).
The appliance must be installed according to the instructions contained in this user's manual and
according to the standards valid in the country of its use.
Installing the cooktop
The cooktop can be installed into a built-in kitchen cabinet which is resistant to temperatures up to 90 °C.
The dimensions of the cooktops are provided further on in the manual.
Prior to placing the cooktop into the kitchen cabinet, it is necessary to adhere to the following dimensions:
1) Minimum distance from the edge of the cut out to the rear wall must be at least 100 mm.
2) Minimum distance from the edge of the cut out to the side wall, walls of furniture, etc. must be at least
100 mm.
3) Minimum distance from the edge of the cut out to a suspended cabinet or a range hood must be at least
650 mm.
EN - 15
03/2012Copyright © 2012, Fast ČR, a. s.
Cooktop dimensions
Cut out an opening in the workbench according the dimensions provided for the individual cooktops.
EN - 16
03/2012Copyright © 2012, Fast ČR, a. s.
Before installing the cooktop into the cut out,  rst place a sealing adhesive tape on to the underside edge of
the cooktop. Check that no gaps remain in the seal through which liquids spilled in the vicinity of the cooktop
could enter into the bottom cabinet.
1. Remove the protective grill, cover and crown of the burner and turn the cooktop upside down. Take care
not to damage the spark plugs.
2. Place the sealing tape around the entire top perimeter. Check that the ends touch but do not overlap.
3. Place the cooktop into the cut out and centre it.
4. Secure the cooktop in place using suitable clamps supplied together with the jet pack. Do not use glues,
silicone or other similar substances to attach the cooktop.
Built-in options
a) Kitchen cabinet with doors
If you will be installing the cooktop into a kitchen cabinet with doors and a top cover, it is necessary to perform
certain modi cations in the design of the cabinet so that the hot underside of the cooktop does not come into
direct contact with the cabinet. The minimum recommended distance between the underside of the cooktop
and the top part is 10 cm. The panel under the cooktop must be easily removable for easy access in the event
of a repair event.
If you will be performing an installation into a kitchen cabinet without a top cover it is necessary to maintain
a minimum recommended distance from inserted items and foods.
b) Kitchen cabinet with an oven
If you will be installing the cooktop into a kitchen cabinet with an oven it is necessary to maintain minimum
distances noted above and it is necessary to ensure that the cooktop has a su cient supply of air.
Install according to the illustrations below to avoid it from overheating.
For safety reasons the electrical wiring connection of the cooktop and the oven must be separate so that it is
possible to easily remove the oven from the cabinet if necessary.
EN - 17
03/2012Copyright © 2012, Fast ČR, a. s.
PART 8: TECHNICAL SPECIFICATIONS
Category II 2H 3B/P 220 – 230 V ~ 50 Hz
"Electrical oven" 1500 W Nominal pressure LPG, 30 mmbar NG, 20 mbar
Wok pan 3.8 kW Hs 0.103 m3/H 3.8 kW Hs 0.334 m3/h
Fast burner 3.0 kW Hs 0.079 m3/H 2.6 kW Hs 0.227 m3/H
Medium fast burner 1.75 kW Hs 0.046 m3/H 1.75 kW Hs 0.159 m3/H
Auxiliary burner 1.0 kW Hs 0.026 m3/H 1.0 kW Hs 0.088 m3/H
NOTE:
All the here mentioned data is subject to change.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of packaging material at a public waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
The meaning of the symbol on the product, its accessory or packaging indicates that this
product shall not be treated as household waste. Please, dispose of this product at your applicable
collection point for the recycling of electrical & electronic equipment waste. Alternatively in some
states of the European Union or other European states you may return your products to your local
retailer when buying an equivalent new product. The correct disposal of this product will help save
valuable natural resources and help in preventing the potential negative impact on the environment
and human health, which could be caused as a result of improper liquidation of waste. Please ask
your local authorities or the nearest waste collection centre for further details. The improper disposal
of this type of waste may fall subject to national regulations for  nes.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from
your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal
method from local government departments or from your seller.
This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design and technical speci cations may occur without prior notice and we reserve the
right to make these changes.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Philco PGG 75 W Návod na obsluhu

Typ
Návod na obsluhu

V iných jazykoch