Philco PBC 6027 Návod na obsluhu

Značka: Philco

Model: PBC 6027

Kategória: Chladničky

Typ: Návod na obsluhu

Beverage Cooler

USER'S MANUAL

PBC 6027

Dear customer,

Thank you for buying aPHILCO brand product. So that your appliance serves you well, please read all

the instructions in this user'smanual.

EN - 1

06/2012

CONTENTS

PART 1: BEFORE PUTTING INTO OPERATION ................................................................................................. 2

Safety precautions ..................................................................................................................................................................................2

Safety instructions for gas R600a ......................................................................................................................................................4

PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 5

PART 3: INSTALLATION .................................................................................................................................... 6

Transport and unpacking .....................................................................................................................................................................6

Operating conditions .............................................................................................................................................................................6

Placement ..................................................................................................................................................................................................7

Cleaning before use................................................................................................................................................................................8

Electrical connection..............................................................................................................................................................................8

PART 4: CONTROLS .......................................................................................................................................... 9

Setting the temperature .......................................................................................................................................................................9

Racks ............................................................................................................................................................................................................9

PART 5: REGULAR MAINTENANCE ................................................................................................................ 11

Cleaning the appliance ...................................................................................................................................................................... 11

Moving the appliance ......................................................................................................................................................................... 11

Energy saving tips ................................................................................................................................................................................ 12

PART 6: WHAT SHOULD IDO WHEN... ........................................................................................................... 13

PART 7: TECHNICAL SPECIFICATIONS ........................................................................................................... 14

EN - 2

06/2012

PART 1: BEFORE PUTTING INTO OPERATION

Safety precautions

Symbols:

General advice for the optimal operation of the appliance

General dangers

Hot surfaces

Before you put the appliance into operation

IMPORTANT

This appliance is designed exclusively for storing alcoholic and non-alcoholic beverages. Do not use the

appliance for purposes other than those for which it was designed.

• Carefully study the user'smanual and installation instructions before installing and using the appliance!

This user'smanual includes important information regarding the installation, operation and maintenance

of the appliance. Store the user'smanual also for future reference, or for other owners of the appliance if

the appliance is sold.

If the appliance is transported in ahorizontal position the oil from the compressor may leak into the

cooling circuit. For this reason, allow the appliance to rest in avertical position for 12 hours before

turning it on, so that the oil  ows back into the compressor.

After unpacking the appliance, carefully inspect that it has in not been damaged in any way. Also

check that the power cord is not damaged. If you discover any defects, turn o the appliance

and contact the vendor or in the case of adamaged power cord contact the service centre. If the

appliance and all its parts are in order, install it according to the instructions in the relevant chapter.

• When installing the appliance in its place or when moving the appliance, the power cord could be

penetrated or damaged. Check that the power cord is not interfering anywhere.

• Before connecting the appliance to the electrical power source check that the capacity of the system

corresponds to the speci cations on the appliance'srating label.

• Any kind of home electric wiring necessary for the connection of the appliance must only be carried out

by aquali ed electrician.

If you move the appliance from its usual position, it is necessary to understand, that although you

have disconnected the power cord, the components on the rear side of the appliance may remain

very hot for some time.

Do not cover or block the air in ow or out ow openings. Insu cient ventilation will cause bad

operation and damage to the appliance.

EN - 3

06/2012

Operating the appliance

• Use the appliance only for the purposes for which it has been designed.

• This appliance is designed only for household use, for storing alcoholic and non-alcoholic beverages.

• The temperature inside the appliance may rise or fall slightly and so these appliances are not suitable for

storing products (e.g. medicines), which require astable temperature.

Do not use any other electric appliances (e.g. heating elements, electric ice cream machines, etc.)

inside the appliance. There is adanger of explosion!

Do not place food inside the appliance containing  ammable propulsion gases (e.g. sprays) and no

explosives, contaminants or volatile substances. There is adanger of explosion!

• Do not use the base, racks, door of the appliance, etc. as astep or as asupport. There is adanger of injury

to persons or damage to the appliance.

• Ensure that the plastic parts of the appliance and the door gasket seals are not soiled with oil or grease. The

plastic parts and the gasket seals would then become porous.

Children in the household

• Never leave packaging and its parts with children. There is adanger of poisoning or su ocation by the

cardboard boxes and plastic sheets!

• This appliance is in no way atoy for children!

• For appliances with door locks: do not leave keys within the reach of children!

• If you will no longer be using the appliance, remove the doors, gasket seals and store it in asafe place. In

this way you will prevent the danger of children becoming trapped inside the appliance.

Maintenance and cleaning

Before you begin with regular or exceptional maintenance, disconnect the appliance'spower cord

or turn o the fuse or circuit breaker. Never pull the electric power cord, only pull on the power plug.

Do not clean the appliance using asteam cleaning device! The steam may come into contact with

the electric components inside the appliance, where ashort circuit could occur. There is adanger of

electric shock!

General instructions

• This appliance must not be used by persons (including children) with physical, sensory or psychological

impairments or by inexperienced persons, unless properly trained or schooled in the safe use of the

appliance, or unless they have been properly supervised by aperson who will be responsible for their

safety. Children should be supervised so as not to play with the appliance.

• This appliance has been tested in accordance with the directives in force in the European Union.

• The tightness of the cooling circuit has been veri ed.

• This appliance conforms to the relevant safety provisions for electrical appliances in force in the European

Union.

Technical safety

• The appliance contains acooling gas, ISOBUTHAN (R600a). Only transport or move the appliance with the

utmost care, prevent excessive impacts and shaking to prevent damaging the appliance. If the cooling

circuit becomes damaged and the cooling gas may be escaping, there is arisk of an explosion, which may

be ignited by aspark or  ame. If the appliance shows signs of damage, it must not be put into operation.

In such acase contact the service centre, ventilate the room where the appliance is located and prevent

the spreading of  ames or other interference with the appliance.

EN - 4

06/2012

Safety instructions for gas R600a

Measures in case of an unexpected release

If ventilation is possible, allow the material to evaporate.

Characteristics of the gas

The gas is highly  ammable, it is necessary to completely prevent contact with an open  ame and hot surfaces.

Because the R600a gas is heavier than air, it may become very concentrated at the level of the ground, where

ventilation is weak.

First aid

Inhalation

Take the a ected person from the contaminated area to a warm, well ventilated location. Staying in

a contaminated location for a long time may cause su ocation, or potentially loss of consciousness. If

necessary, provide mouth-to-mouth resuscitation and in exceptionally serious situations, under expert

medical supervision, give oxygen.

Contact with the skin

Accidental contact with the skin is not hazardous to health. Thoroughly wash the a ected area with water. The

liquid spray or dispersed liquid may cause frost bite, wash the a ected area with large amounts of water and

contact amedical doctor.

Contact with the eyes

If eyes have been a ected, wash out with large amounts of water, while trying to keep the eyes open, and call

aspecialised doctor as soon as possible. If contact or inhalation of the R600a gas occurs, contact your medical

doctor.

EN - 5

06/2012

PART 2: DESCRIPTION OF THE APPLIANCE

Description of the control panel

• "RUN"

The indicator light will turn on when the appliance is running.

• LIGHT button (Internal lighting)

To turn on / o the internal light.

• POWER button (On / O )

To turn the appliance on / o (press and hold down the button for approximately 3 seconds).

• DISPLAY

To display the temperature inside the appliance.

• Up button

To increase temperature. Each time it is pressed the temperature will increase by 1 °C.

• Down button

To decrease temperature. Each time it is pressed the temperature will decrease by 1 °C.

EN - 6

06/2012

PART 3: INSTALLATION

Transport and unpacking

If the appliance is transported in ahorizontal position the oil from the compressor may leak into the cooling

circuit. For this reason, allow the appliance to rest in avertical position for 12 hours before turning it on, so that

the oil  ows back into the compressor.

Remove the external packaging, remove the protective plastic  lm from the surface of the appliance (if used)

and clean the external parts of the appliance with an agent designed for this purpose. Do not use steel wool or

any coarse agents, which could irreparably damage the surface of the appliance. Carefully remove all papers

and adhesive tape from the appliance, doors and other parts packed in polystyrene. Remove documents and

accessories from inside the appliance.

The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local

regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,

because they present apossible source of danger.

Carefully inspect the appliance. If you discover any faults, stop the installation and contact the vendor.

Operating conditions

Proper operation of the appliance is guaranteed only if the following conditions are met:

• The temperature in the room where the appliance is located conforms to the climate class stated on the

appliance'srating label.

• Maximum ambient relative humidity: 90%.

• The appliance must be placed at asu cient distance from heat sources (e.g. baking ovens, central heating,

direct sunlight, etc.).

• The appliance must be located in such aplace that it is protected against the e ects of weather.

• Regular maintenance is performed according to the instructions in this user'smanual.

• The ventilation openings in the cover of the appliance must not be covered by anything.

• Correct installation (e.g. levelling, the capacity of the system correspond to the speci cations on the rating

label of the appliance).

Table – Climatic class

Climatic class

Ambient

temperature

SN +10 °C to +32 °C

N +16 °C to +32 °C

ST +16 °C to +38 °C

T +16 °C to +43 °C

EN - 7

06/2012

Placement

The location for the placement of the appliance must meet the requirements in the paragraph "Operating

conditions" and must have astable  oor with aload bearing capacity corresponding to the weight of the

appliance.

This appliance is may be built-in.

In such acase, adhere to the dimensions below.

From the front From the side From above

Level the appliance using the adjustable feet, ensure there is agap between the bottom edge of the appliance

and the ground, so that there is su cient circulation of the cooling air, by which you will ensure the optimal

performance of the cooling circuit.

• Check whether any cooling circulation pipes have been damaged during the installation.

• Use the appliance only for the purposes for which it has been designed.

• The appliance must be located on arigid and even surface.

• In this way you will ensure free circulation of the coolant and e ective operation of your appliance.

• If possible, place the appliance into acool, well ventilated and dry room.

• Do not locate the appliance in direct sunlight or in aroom with ahigh temperature, in the vicinity of any

sources of direct heat, such as heating, an oven, astove, etc. – this would mean that the compressor would

need to work alot harder resulting asubstantially higher power consumption level.

If it is not possible to prevent the installation in the vicinity of aheat source, we recommend the insertion of an

appropriate insulating board (do not use asbestos) between the appliance and the heat source; or at least to

maintain the following minimum distances:

• From agas or electric stove 3 cm;

• From aheater or oven, etc. 30 cm;

• From another cooling appliance 2 cm.

EN - 8

06/2012

Do not place any appliances on the appliance, which release heat on to the appliance, such as microwaves

ovens, toasters, etc.

Never cover the ventilation grill. Pull out the power plug by pulling on the plug itself, never pull on the cord

when disconnecting the appliance.

Before turning on the appliance allow it to stand in its  nal location for 12 hours, the coolant circuit

will stabilise in this way and no operating problems will occur. Before connecting the appliance to

the power grid check that it is perfectly dry inside – especially in the corners.

Danger warning

The coolant may be highly  ammable, depending on its composition. The coolant circuit was hermetically

closed and sealed and was tested many times for possible leaks. Any unquali ed tampering with the product

may cause a re hazard. Check that there is no mechanical interruption or e ect on the coolant circulation,

namely in the accessible parts around the compressor.

Only professionally quali ed persons may work on the cooling system.

Cleaning before use

Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the

inside parts using lukewarm water with aneutral cleaning agent, vinegar or sodium carbonate – in this way

you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive

agents, which could damage the surfaces.

Electrical connection

Before connecting the power plug to the power socket, check that:

• Your hands are completely dry.

• The voltage and frequency shown on the rating label of the appliance corresponds to that in the home

power grid (permitted tolerance from -6% to +6% for nominal voltage, for use with di erent voltages, use

avoltage changer with the corresponding parameters).

• The power cord and the plug are not damaged or caught under heavy objects.

• The power cord is not excessively tensioned, it is not permitted to use an extension cord.

Do not connect the appliance to avoltage recti er (e.g. solar power plant) or use an extension cord.

The appliance must be connected to aworking grounding lead.

If the power socket of the home system is not grounded in accordance with the current legal

regulations, connect the appliance after consulting aspecialised technician to the grounding lead

itself.

The manufacturer takes no responsibility for injuries caused as a result of not following these

instructions.

If you do not correctly level the appliance during the installation, the door may not close shut and

seal properly, which may cause problems with the cooling, ice build up or moisture. Levelling the

appliance is very important.

Level the appliance using the levelling feet – turn them clockwise to lift the appliance and turn

them anticlockwise to lower the appliance.

EN - 9

06/2012

PART 4: CONTROLS

Each compartment of the appliance (left and right) is controlled independently.

Insert the power plug into aproperly grounded power socket.

If the power supply is interrupted, the previously set temperature will be automatically deleted and the factory

set temperature will be set.

7 °C - Left compartment

12 °C - Right compartment

Setting the temperature

Use the up/down buttons to set the desired temperature of the appliance. Each time the up/down buttons are

pressed, the temperature will increase/decrease by 1 °C. The set temperature will  ash on the LED display for

5 seconds, then the temperature inside the appliance will be shown.

Both compartments: You can set the temperature in the range from 5 °C to 18 °C.

To show the set temperature, press and hold the respective button for about 5 seconds and the set temperature

will  ash on the screen for about 5 seconds.

Flashing LED indicator light = Set temperature

Lit LED light = Temperature inside the appliance

Racks

• To prevent damaging the doors or gasket seals, open the doors wide open when removing the racks.

• For easier handling of bottles, it is necessary to pull the rack out by at least a1/3. The sides of the racks are

equipped with protective stoppers, which prevent bottles from falling from the racks.

When removing / inserting the racks from / into the rails, lift one side of the rack as shown in the picture below

and pull the rack out towards yourself, or push it in when inserting it, until one side is securely seated in the rail.

EN - 10

06/2012

NOTE:

• Before reconnecting the power plug into apower socket, wait 3 to 5 minutes. Otherwise you could

damage your appliance. If you attempt to turn on the appliance before the end of this time delay, the

appliance will not turn on.

• If you turn on the appliance for the  rst time or after arestart, or after it has been out of operation for

along time, there may be atemperature di erence between the temperature inside the appliance

and on the LED display. This is anormal event caused by the duration of the activation period. Leave

the appliance turned on for several hours and the temperatures will stabilise during operation.

EN - 11

06/2012

PART 5: REGULAR MAINTENANCE

Cleaning the appliance

Before commencing to clean the refrigerator disconnect it from the power source.

• Wipe the internal surface of the appliance with asoft sponge lightly dipped in atable salt solution. Add 2

tablespoons of table salt into 1 litre of warm water.

• Wash the racks in warm water with asmall amount of kitchen dishwashing liquid, rinse and wipe dry. Allow

the wooden racks (if the wine cooler has them) to dry completely before returning them to the wine cooler.

• All parts that you wash with asoft sponge lightly dipped in water must be properly wiped dry.

• Wipe the outer surface with asoft sponge lightly dipped in water with asmall amount of dishwashing

liquid. Wipe dry using aclean cloth.

WARNING:

Do not use steel wool or sponges with steel wool on stainless steel surfaces. They could damage the

surface.

Do not use cleaning waxes, concentrated cleaning agents, bleaches or cleaning products containing

kerosene on the plastic or rubber parts.

Never use paper towels or window cleaners on the plastic parts.

The use of steam cleaning appliances is extremely dangerous and so is strictly forbidden.

Power outage

Most power outages are recti ed within afew hours and should not have an e ect on the temperature inside

the appliance if you limit its ventilation. However, in the event of an extended power outage it is necessary to

take appropriate steps to prevent the contents inside the appliance from spoiling.

TAKING OUT OF OPERATION FOR AN EXTENDED PERIOD

If you are not going to use the refrigerator for an extended period of time, do the following:

Disconnect the refrigerator from the power source by pulling it out of the power socket. Clean out the inside

and dry it out as described in the part Cleaning the refrigerator. Leave the door open to prevent an unpleasant

odour forming inside.

Moving

• Before moving it, it is necessary to remove all contents from the appliance.

• Secure freely moving parts inside the appliance (racks), e.g. using adhesive tape.

• To prevent damage, screw in the levelling feet.

• Secure the door, e.g. using adhesive tape.

• Ensure that the appliance always remains in avertical position while being transported. To prevent the

appliance from damage during transport you can cover it with ablanket or another soft textile.

EN - 12

06/2012

Energy saving tips

• Locate the appliance away from sources of heat and out of direct sunlight.

• Ensure su cient ventilation. Under no circumstances should you cover the ventilation openings.

• Only open the door when necessary. Do not leave the door open for along time or open / close the door

too often.

EN - 13

06/2012

PART 6: WHAT SHOULD IDO WHEN...

If the appliance is not working as it should, prior to calling an authorised service centre, read the instructions

below, which will help you remedy the most common problems with the appliance. However, should the

problem persist or you are unable to remedy it yourself, immediately turn the appliance o , disconnect it from

the power socket and contact an authorised service centre.

Under no condition should you repair the appliance yourself.

MALFUNCTION POSSIBLE CAUSE

The appliance is not

working.

The appliance is not connected to the electrical power grid.

The appliance is turned o .

The circuit breaker is activated or the fuse is burned.

The appliance is not

cooling.

Check the temperature settings.

The temperature of the outside environment is too high.

The doors are opened too frequently.

The doors are not properly shut.

The door gasket seals are not sealing properly.

The appliance turns on

and o often.

The temperature in the room is higher than normal.

Alarge amount of food was placed in the appliance.

The doors are opened too frequently.

The doors are not properly shut.

The temperature controller is not set properly.

The door gasket seals are not sealing properly.

The lights are not

working.

The appliance is not connected to the electrical power grid.

The circuit breaker is activated or the fuse is burned.

The light bulb broke.

The light is switched o .

Vibrations. Ensure that the appliance is correctly levelled.

The appliance is too

loud.

The rattling sound may be caused by the  owing coolant. This is normal.

At the end of each cycle you will hear abubbling sound caused by the  owing

coolant.

The contraction and expansion of the internal walls may cause acracking or

popping sound.

The appliance is not levelled.

The doors are not closing

properly.

The appliance is not levelled.

The door opening direction change was performed incorrectly.

The gasket seal is dirty.

The racks are incorrectly located.

EN - 14

06/2012

PART 7: TECHNICAL SPECIFICATIONS

DESIGNATION PBC 6027

Number of cans / bottles (pcs.) 60/27

Volume (l) 146

Cooling power 5 – 18 °C

Voltage frequency 220-240 V~50 Hz

Power input 140 W

Energy class B

Power consumption (kWh/24h) 0.53

Annual power consumption in kWh 195

Dimensions w/d/h (cm) 60/60/88

Noise level (dB) 42

Weight (kg) 59

Automatic locking of panel No

Coolant R600a

Temperature zones 2

Automatic defrosting yes

Climatic class ST

Colour black

Touch controls yes

LED display yes

NOTE:

All the here mentioned data is subject to change.

EN - 15

06/2012

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED

PACKAGING MATERIALS

Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates that this product

shall not be treated as household waste. Please, dispose of this product at your applicable collection

point for the recycling of electrical & electronic equipment waste. Alternatively in some states of

the European Union or other European states you may return your products to your local retailer

when buying an equivalent new product. The correct disposal of this product will help save valuable

natural resources and help in preventing the potential negative impact on the environment and

human health, which could be caused as a result of improper liquidation of waste. Please ask your

local authorities or the nearest waste collection centre for further details. The improper disposal of

this type of waste may fall subject to national regulations for  nes.

For business entities in the European Union

If you wish to dispose of an electrical or electronic device, request the necessary information from

your seller or supplier.

Disposal in other countries outside the European Union

If you wish to dispose of this product, request the necessary information about the correct disposal

method from local government departments or from your seller.

This product meets all the basic EU regulation requirements that relate to it.

Changes to the text, design and technical speci cations may occur without prior notice and we reserve the

right to make these changes.

Chladič nápojů

NÁVOD K OBSLUZE

PBC 6027

Vážený zákazníku,

Děkujeme, že jste zakoupil výrobek značky PHILCO. Aby váš spotřebič sloužil co nejlépe, přečtěte si

všechny pokyny v tomto návodu.

Stránka sa načítava ...

Philco PBC 6027 Návod na obsluhu

Značka: Philco

Model: PBC 6027

Kategória: Chladničky

Typ: Návod na obsluhu

Stiahnite si PDF

správa

V iných jazykoch

English: Philco PBC 6027 Owner's manual

Philco PBC 6027 Návod na obsluhu

Philco PBC 6027 Návod na obsluhu

V iných jazykoch

Súvisiace články