Beko GN1406231XBN Používateľská príručka

GN1406231XBN

EN/DE/PL

58 4402 0000/AO-1/7-EN-DE-PL

Refrigerator

User Manual

Gefrierschrank

Bedienungsanleitung

Chłodziarka

Instrukcja użytkowania

Please read this manual before using the product!

Dear Customer,

We'd like you to make the best use of our product, which has been manufactured in modern facilities

with care and meticulous quality controls.

Thus, we advice you to read the entire user manual before you use the product. In case the product

changes hands, do not forget to hand the guide to its new owner along with the product.

This guide will help you use the product quickly and safely.

 Please read the user guide carefully before installing and operating the product.

 Always observe the applicable safety instructions.

 Keep the user guide within easy reach for future use.

 Please read any other documents provided with the product.

Keep in mind that this user guide may apply to several product models. The guide clearly indicates any

variations of different models.

CImportant information and useful

tips.

ARisk of life and property.

BRisk of electric shock.

The product’s packaging is made of

recyclable materials, in accordance

with the National Environment

Legislation.

A

C

SUPPLIER’S NAME MODEL IDENTIFIER (*)

INFORMATION

C

.The model information as stored in the product data base

can be reached by entering following website and searching

for your model identiﬁer (*) found on energy label.

https://eprel.ec.europa.eu/

2 / 30 EN Refrigerator / User Manual

1- Safety Instructions 3

2 Your Refrigerator 8

2 Your Refrigerator 9

3 Installation 10

3.1 Appropriate location for installation . . . . . . .10

3.2 Installing the plastic wedges . . . . . . . . . . . .10

3.3 *Adjusting the feet . . . . . . . . . . . . . . . . . . .11

3.4 Electric connection . . . . . . . . . . . . . . . . . . .12

4 Preparation 13

4.1 Things to be done for saving energy . . . . .13

4.2 Recommendations about the fresh food

compartment. . . . . . . . . . . . . . . . . . . . . .13

4.3 Initial use. . . . . . . . . . . . . . . . . . . . . . . . .14

5 Operating the product 15

5.1 Indicator panel . . . . . . . . . . . . . . . . . . . . . .15

5.2 Indicator panel. . . . . . . . . . . . . . . . . . . . .20

5.3 Freezing fresh food. . . . . . . . . . . . . . . . . . .22

5.4 Recommendations for preserving the frozen

food . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

5.5 Deep-freeze information . . . . . . . . . . . . . . .23

5.6 Placing the food . . . . . . . . . . . . . . . . . . . . .23

5.7 Door open warning. . . . . . . . . . . . . . . . . . .23

5.8 Crisper. . . . . . . . . . . . . . . . . . . . . . . . . . . .24

5.9 Humidity-controlled crisper . . . . . . . . . . . . .24

(FreSHelf). . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

5.10 Egg tray . . . . . . . . . . . . . . . . . . . . . . . . . .24

5.11 Movable Middle Section . . . . . . . . . . . . . .24

5.12 Cool Control Storage Compartment . . . . .25

5.13 Blue light/HarvestFresh. . . . . . . . . . . . . . .25

5.14 Odour filter. . . . . . . . . . . . . . . . . . . . . . . .25

5.15 Wine cellar compartment . . . . . . . . . . . . .26

5.16 Use of internal water dispenser and water

dispenser at the door . . . . . . . . . . . . . . . .28

5.17 Dispensing water . . . . . . . . . . . . . . . . . . .28

5.18 For using water dispenser. . . . . . . . . . . . .29

5.19 Icematic . . . . . . . . . . . . . . . . . . . . . . . . .29

5.20 Icematic and ice storage container . . . . . .30

6 Maintenance and cleaning 31

6.1 Avoiding bad odours . . . . . . . . . . . . . . . . . .31

6.2 Protecting the plastic surfaces . . . . . . . . . .31

7. Troubleshooting 32

3/ 30 EN Refrigerator / User Manual

 This section includes the safety

instructions necessary to prevent

the risk of personal injury or material

damage.

 Our company shall not be held

responsible for damages that may

occur if these instructions are not

observed.

Installation and repair operations shall always

be performed by Authorized Service.

Always use genuine spare parts and

accessories.

Original spare parts will be provided for

10 years, following the product purchasing date.

Do not repair or replace any part of the

product unless specified expressly in the user

manual.

Do not perform any modifications on the

product.

1.1 Purpose of usage

 This product is not intended for commercial

use and it shall not be used out of its intended

purpose.

This product is intended for operating interiors,

such as households or similar.

For example;

- In the staff kitchens of the stores, offices and

other working environments,

- In farm houses,

- In the units of hotels, motels or other resting

facilities that are used by the customers,

- In hostels, or similar environments,

- In catering services and similar non-retail

applications.

This product shall not be used in open or enclosed

external environments such as vessels, balconies

or terraces. Exposing the product to rain, snow,

sunlight and wind may cause risk of fire.

1.2 Safety of children,

vulnerable persons and pets

 This product may be used by children

aged 8 years and older and persons

with underdeveloped physical,

sensory or mental capabilities or

lack of experience and knowledge

if they have been given supervision

or instruction concerning use of the

appliance in a the product safe way

and the hazards involved.

 Children between 3 and 8 years are

allowed to put and take out food to/

from the cooler product.

 Electrical products are dangerous for

children and pets. Children and pets

must not play with, climb on, or enter

the product.

 Cleaning and user maintenance

should not be performed by children

unless there is someone overseeing

them.

 Keep the packaging materials away

from children. Risk of injury and

suffocation.

 Before disposing of old products that

shall not be used any more:

1.

Unplug the power cord from the mains socket.

2.

Cut the power cord and remove it from the

appliance together with the plug.

3.

Do not remove the racks and drawers from the

product to prevent children from getting inside the

appliance.

4.

Remove the doors.

5.

Store the product so that it shall not be tipped over.

6.

Do not allow children to play with the scrapped

product.

 Do not dispose of the product by throwing it

into fire. Risk of explosion.

 If there is a lock available in the product’s

door, keep the key out of children’s reach.

1- Safety Instructions

4 / 30 EN Refrigerator / User Manual

Important instructions regarding safety and environment

1.3 Electrical safety

 The product shall not be plugged

into the outlet during installation,

maintenance, cleaning, repair, and

transportation operations.

 If the power the cord is damaged, it

shall be replaced by authorized service

only to avoid any risk that may occur.

 Do not tuck the power cord under the

product or to the rear of the product. Do

not put heavy items on the power cord.

The power cord should not be bent,

crushed, and come into contact with

any heat source.

 Do not use an extension cord, multi-

plug or adaptor to operate your product.

 Portable multi sockets or portable

power supplies may overheat and cause

fire. Thus, do not have a multi-plug

behind or in the vicinity of the product.

 The plug shall be easily accessible. If

this is not possible, a mechanism that

meets the electrical legislation and

that disconnects all terminals from

the mains (fuse, switch, main switch,

etc.) shall be available on the electrical

installation.

 Do not touch the plug with wet hands.

 When unplugging the appliance, don’t

hold the power cord, but the plug.

1.4 Handling Safety

 This product is heavy, do not handle it

by yourself.

 Do not hold the product from its door

while handling the product.

 Be careful not to damage the cooling

system and the pipes while handling

the product. Do not operate the product

if the pipes are damaged, and contact

an authorized service.

1.5 Installation Safety

 Contact the Authorized Service

for the product’s installation. To

prepare the product for installation,

see the information in the user

guide and make sure the electric

and water utilities are as required.

If the installation is not suitable, call

a qualified electrician and plumber

to have them make the necessary

arrangements. Otherwise, electric

shock, fire, issues with the product or

injuries may occur.

 Check for any damage on the product

before installing it. Do not have the

product installed if it is damaged.

 Place the product on a level and

hard surface and balance with the

adjustable legs. Otherwise, the

refrigerator may tip over and cause

injuries.

 The product shall be installed in a

dry and ventilated environment.

Do not keep carpets, rugs or similar

floor covers under the product. This

may cause risk of fire as a result of

inadequate ventilation!

 Do not block or cover ventilation

holes. Otherwise, power consumption

may be increased and damage to your

product may occur.

 Do not connect the product to supply

systems such as solar power supplies.

Otherwise, damage to your product

may occur as a result of the abrupt

voltage fluctuations!

 The more refrigerant a refrigerator

contains, the bigger its installation

room shall be. In very small rooms,

a flammable gas-air mixture may

occur in case of a gas leak in the

cooling system. At least 1 m3 of

volume is required for each 8 grams

5/ 30 EN Refrigerator / User Manual

Important instructions regarding safety and environment

of refrigerant. The amount of the

refrigerant available in your product

is specified in the Type Label.

 The installation place of the product

shall not be exposed to direct

sunlight and it shall not be in the

vicinity of a heat source such as

stoves, radiators, etc.

If you cannot prevent installation of the product

in the vicinity of a heat source, you shall use a

suitable insulation plate and the minimum distance

to the heat source shall be as specified below.

- At least 30 cm away from heat sources such

as stoves, heating units and heaters, etc.,

- And at least 5 cm away from electric ovens.

 Your product has the protection

class of I. Plug the product in a

grounded socket that conforms with

the Voltage, Current and Frequency

values specified in the type label. The

socket outlet shall be equipped with a

fuse with a rating of 10 A – 16 A. Our

company shall not be responsible for

the damages that shall be incurred

as a result of operating the product

without ensuring ground and

electrical connections made as per

local or national regulations.

 The product’s power cable must

be unplugged during installation.

Otherwise, risk of electric shock and

injury may occur!

 Do not plug the product to loose, broken, dirty,

greasy sockets or sockets that has come out

their seats or sockets with a risk of water

contact.

 Place the power cord and hoses (if available) of

the product so that they shall not cause a risk

of tripping over.

 Penetration of humidity to live parts or to the

power cord may cause short circuit. Thus, do

not use the product in humid environments or

in areas where water may splash (e.g. garage,

laundry room, etc.) If the refrigerator is wet

by water, unplug it and contact an authorized

service.

 Do not connect your refrigerator to power

saving devices. These systems are harmful for

the product.

1.6 Operational safety

 Do not use chemical solvents on the product.

These materials contain an explosion risk.

 In case of a failure of the product, unplug it

and do not operate until it is repaired by the

authorized service. There is a risk of electric

shock!

 Do not place a source of flame (e.g. candles,

cigarettes, etc.) on the product or in the vicinity

of it.

 Do not get on the product. Risk of falling and

injury!

 Do not cause damage to the pipes of the

cooling system using sharp and piercing tools.

The refrigerant that sprays out in case of

puncturing the gas pipes, pipe extensions or

upper surface coatings may cause irritation of

skin and injuries of the eyes.

 Do not place and operate electric appliances

inside the refrigerators/deep freezer unless it is

advised by the manufacturer.

 Do not jam any parts of your hands or your

body to the moving parts inside the product.

Be careful to prevent jamming of your fingers

between the refrigerator and its door. Be careful

while opening or closing the door if there are

children around.

 Do not put ice cream, ice cubes or frozen food

to your mouth as soon as you take them out of

the freezer. Risk of frostbite!

 Do not touch the inner walls, metal

parts of the freezer or food kept

inside the refrigerator with wet

hands. Risk of frostbite!

 Do not place soda cans or cans and

bottles that contain fluids that may be

frozen to the freezer compartment.

Cans or bottles may explode. Risk of

injury and material damage!

 Do not use or place materials

sensitive against temperature such as

flammable sprays, flammable objects,

dry ice or other chemical agents in the

6 / 30 EN Refrigerator / User Manual

Important instructions regarding safety and environment

vicinity of the refrigerator. Risk of fire

and explosion!

 Do not store explosive materials

such as aerosol cans with flammable

materials inside the product.

 Do not place cans containing fluids

over the product. Splashing of water

on an electrical part may cause the

risk of an electric shock or a fire.

 This product is not intended for

storage and cooling of medicines,

blood plasma, laboratory preparations

or similar materials and products that

are subject to the Medical Products

Directive.

 If the product is used against its

intended purpose, it may cause

damage to or deterioration of the

products kept inside.

 If your refrigerator is equipped with

blue light, do not look at this light

with optical devices. Do not stare

directly at UV LED light for a long

time. Ultraviolet rays may cause eye

strain.

 Do not fill the product with more food

than its capacity. Injuries or damages

may occur if the contents of the

refrigerator falls when the door is

opened. Similar problems may occur

when an object is placed over the

product.

 Ensure that you have removed any

ice or water that may have fallen to

the floor to prevent injuries.

 Change the locations of the racks/

bottle racks on the door of your

refrigerator while the racks are

empty only. Danger of physical injury!

 Do not place objects that may fall/

tipped over on the product. These

objects may fall while opening or

closing the door and cause injuries

and/or material damages.

 Do not hit or exert excessive pressure

on glass surfaces. Broken glass

may cause injuries and/or material

damages.

 The cooling system in your product

contains R600a refrigerant. The

refrigerant type used in the product

is specified in the the type label.

This gas is flammable. Therefore, be

careful not to damage the cooling

system and the pipes while operating

the product. In case of damage to the

pipes;

- do not touch the product or the power cord,

- Keep the product away from potential sources

of fire that may cause the product to catch fire.

- ventilation the area where the product is

placed. Do not use a fan.

- Contact authorized service.

 If the product is damaged and you

observe gas leak, please stay away

from the gas. Gas may cause frostbite

if it contacts your skin.

For Products With Water Fountain / Ice Maker

 Use only drinking water. Do not fill the water

tank with fruit juice, milk, fizzy beverages,

alcoholic beverages or any other liquids

incompatible for use in the water fountain. This

may cause risk to your health and safety.

 Do not allow the children to play with the water

dispenser or Ice Maker to prevent accidents

and injuries.

 Do not insert your fingers or other objects

inside the hole of the water dispenser, ice

channel or inside the container of the Ice

Maker. This may cause injuries or material

damages.

1.7 Maintenance and

cleaning safety

 Do not pull by the door handle if you

shall move the product for cleaning

7/ 30 EN Refrigerator / User Manual

Important instructions regarding safety and environment

purposes. Handle may cause injuries

if it is pulled too hard.

 Do not clean the product by spraying

or pouring water on the product and

inside the product. Risk of electric

shock and fire.

 Do not use sharp or abrasive tools

to clean the product. Do not use

materials such as household cleaning

agents, detergents, gas, gasoline,

alcohol, wax, etc.

 Use cleaning and maintenance

agents that are not harmful for food

only inside the product.

 Do not use steam or steamed

cleaning materials for cleaning the

product and thawing the ice inside it.

Steam contacts the live areas in your

refrigerator and causes short circuit

or electric shock!

 Take care to keep water away from

the electronic circuits or lighting of

the product.

 Use a clean, dry cloth to wipe the dust

or foreign material on the tips of the

plugs. Do not use a wet or damp piece

of cloth to clean the plug. Otherwise,

risk of fire or electric shock may occur.

1.8HomeWhiz

(May not be applicable for all models)

 Follow the safety warnings even if

you are away from the product while

operating the product via HomeWhiz

app. Also, pay attention to the

warnings in the app.

1.9 Lighting

(May not be applicable for all models)

 Contact an authorized service when

you shall replace the LED / bulb using

for lighting.

1.10 Environmental instructions

Compliance with the WEEE

Directive and Disposing

of the Waste Product:

This product complies with EU WEEE Directive

(2012/19/EU). This product bears a classification

symbol for waste electrical and electronic equip-

ment (WEEE).

This symbol indicates that this product

shall not be disposed with other house-

hold wastes at the end of its service life.

Used device must be returned to offical

collection point for recycling of electri-

cal and electronic devices. To find these collection

systems please contact to your local authorities or

retailer where the product was puchased. Each

household performs important role in recovering

and recycling of old appliance. Appropriate dispos-

al of used appliance helps prevent potential nega-

tive consequences for the environment and hu-

man health.

1.11 Compliance with RoHS Directive

The product you have purchased complies with EU

RoHS Directive (2011/65/EU). It does not contain

harmful and prohibited materials specified in the

Directive.

1.12 Package information

Packaging materials of the product are

manufactured from recyclable materials

in accordance with our National

Environment Regulations. Do not dis-

pose of the packaging materials together with the

domestic or other wastes. Take them to the pack-

aging material collection points designated by the

local authorities.

8 / 30 EN Refrigerator / User Manual

CFigures in this user manual are schematic and may not match the product exactly. If the subject parts

are not included in the product you have purchased, then those parts are valid for other models.

2 Your Refrigerator

6

*12

1- Control and indicator panel

2- Butter & Cheese section

3- 70 mm moving door shelf

4- Fridge compartment glass shelf

5- Fridge compartment crisper

6- Gallon door shelf

7- The dairy (cold storage) bin

8- Icebox drawer

9- Multizone compartment glass shelf/cooler

10- Freezer compartment drawers

11- Multizone Compartment's drawer

12- Watertank

* OPTIONAL

9/ 30 EN Refrigerator / User Manual

CFigures in this user manual are schematic and may not match the product exactly. If the subject parts

are not included in the product you have purchased, then those parts are valid for other models.

2 Your Refrigerator

1- Control and indicator panel

2- Butter & Cheese section

3- 70 mm moving door shelf

4- Fridge compartment glass shelf

5- Fridge compartment crisper

6- Gallon door shelf

7- The dairy (cold storage) bin

8- Icebox drawer

9- Multizone compartment glass shelf/cooler

10- Freezer compartment drawers

11- Watertank

* OPTIONAL

*2

*3

4

56

7

*8

*9

1

10

5*11

10 / 30 EN Refrigerator / User Manual

3.1 Appropriate location

for installation

Contact an Authorized Service for the installation

of the product. In order to prepare the product

for use, refer the information in the user manual

and ensure that electrical installation and water

installation are appropriate. If not, call a qualified

electrician and technician to have any necessary

arrangements carried out.

BWARNING: Manufacturer shall not

be held liable for damages that may

arise from procedures carried out by

unauthorized persons.

BWARNING: Product must not be plugged

in during installation. Otherwise, there is

the risk of death or serious injury!

A

WARNING: : If the door clearance of the

room where the product shall be placed is

so tight to prevent passing of the product,

remove the door of the room and pass the

product through the door by turning it to

its side; if this does not work, contact the

authorized service.



prevent jolts.



heat sources such as hobs, heater cores and

stoves and at least 5 cm away from electrical

ovens.



and kept in humid places.



function efficiently. If the product will be placed

in an alcove, remember to leave at least 5 cm

clearance between the product and the ceiling,

rear wall and the side walls.



remember to leave at least 5 cm clearance

between the product and the ceiling, rear

wall and the side walls. Check if the rear wall

clearance protection component is present at

its location (if provided with the product). If the

component is not available, or if it is lost or

3 Installation

fallen, position the product so that at least 5 cm

clearance shall be left between the rear surface

of the product and the wall of the room. The

clearance at the rear is important for efficient

operation of the product.



temperature falls below -5°C.

3.2 Installing the plastic wedges

Plastic wedges supplied with the product are

used to create the distance for the air circulation

between the product and the rear wall.

1.

To install the wedges, remove the screws on the

product and use the screws supplied together with the

wedges.

2.

Insert the 2 plastic wedges onto the rear ventilation

cover as illustrated in the figure.

11/ 30 EN Refrigerator / User Manual

Installation

3.3 *Adjusting the feet

If the product stands unbalanced after installation,

adjust the feet on the front by rotating them to the

right or left.

*If your product does not have a wine

compartment or is not a glass door, your product

does not have adjustable stands, the product has

fixed stands.

To adjust the doors vertically,

Loosen the fixing nut located at the bottom.

Rotate the adjusting nut according to the position

of the door (clockwise/counter-clockwise).

Tighten the fixing nut in order to fix the position.

To adjust the doors horizontally,

Loosen the fixing nut located at the top.

Rotate the side adjusting nut according to the

position of the door (clockwise/counter-clockwise).

Tighten the fixing nut which is at the top in order to

fix the position.

adjusting nut



adjusting nut

12 / 30 EN Refrigerator / User Manual

Installation

3.4 Electric connection

AWARNING: Do not make connections via

extension cables or multi-plugs.

BWARNING: Damaged power cable must

be replaced by the Authorized Service

Agent.

CIf two coolers are to be installed side

by side, there should be at least 4 cm

distance between them.

 Our company shall not be liable for any

damages that will arise when the product

is used without grounding and electrical

connection in accordance with the national

regulations.

 Power cable plug must be within easy reach

after installation.

 Do not extension cords or cordless multiple

outlets between your product and the wall

outlet.

-Upper hinge group is fixed with 3 screws.

-The hinge cover is attached after the sockets are

installed.

- Then the hinge cover is fixed with two screws.

13/ 30 EN Refrigerator / User Manual

4 Preparation

 Thawing the frozen foods in the fridge

compartment both saves energy and reserves

the quality of the foods.

CTemperature of the room where your

refrigerator is located should at least

be 10ºC /50°F. Operating your

refrigerator under cooler conditions is not

recommended with regard to its efficiency.

CInside of your refrigerator must be cleaned

thoroughly.

CIf two coolers are to be installed side

by side, there should be at least 4 cm

distance between them.

4.2 Recommendations about the

fresh food compartment

 Make sure that the food does not touch the

temperature sensor in fresh food compartment.

To allow the fresh food compartment to keep

its ideal storage temperature, the sensor must

not be hindered by food.

 Do not place hot foods or beverages inside the

product.

4.1 Things to be done for

saving energy

AConnecting your refrigerator to systems

that save energy is dangerous as they may

cause damage on the product.

 For a freestanding appliance; ‘this refrigerating

appliance is not intended to be used as a built-

in appliance’ .

 Do not leave the doors of your refrigerator open

for a long time.

 Do not put hot food or drinks in your

refrigerator.

 Do not overload the refrigerator. Cooling

capacity will fall when the air circulation in the

refrigerator is hindered.

 Do not place the refrigerator in places subject

to direct sunlight. Install the product at least

30 cm away from heat sources such as hobs,

ovens, heater units and stoves and at least 5

cm away from electrical ovens.

 Pay attention to store your food in refrigerator

in closed containers.

 To be able store maximum food in the freezer

compartment of your refrigerator, the upper

drawer has to be removed and placed on top

of glass shelf. Power consumption stated for

your refrigerator has been determined after

removing the icematic and the upper drawers

as to allow maximum loading. It is strongly

recommended to use the lower drawers in the

freezer and the multizone compartment while

loading.

 Since hot and humid air will not directly

penetrate into your product when the doors

are not opened, your product will optimize

itself in conditions sufficient to protect your

food. Functions and components such as

compressor, fan, heater, defrost, lighting,

display and so on will operate according to

the needs to consume minimum energy under

these circumstances.

 Airflow should not be blocked by placing

foods in front of the freezer and the multizone

compartment fans. Foods should be loaded by

leaving minimum 5 cm space in front of the

protective fan grid.

14 / 30 EN Refrigerator / User Manual

Preparation

4.3 Initial use

Before using the product, make sure that all

preparations have been made in accordance

with the instructions given in the "Important

instructions regarding safety and environment" and

"Installation" chapters.

 Clean the interior of the refrigerator as

recommended in the “Maintenance and

cleaning” section. Before you start the

refrigerator, make sure that the interior is dry.

 Plug the refrigerator in a grounded socket. The

interior illumination is lit when the door of the

refrigerator is opened.

 Operate the refrigerator for 6 hours without

placing any food in it and do not open its door

unless it is necessary.

C

starts up. The liquids and gases sealed

within the refrigeration system may also

give rise to noise, even if the compressor is

not running and this is quite normal.

CFront edges of the refrigerator may

feel warm. This is normal. These areas

are designed to be warm to avoid

condensation.

15/ 30 EN Refrigerator / User Manual

5 Operating the product

CFigures in this user manual are schematic and may not match the product exactly. If the subject parts

are not included in the product you have purchased, then those parts are valid for other models.

5.1 Indicator panel

Touch-controlled indicator panel allows you to set the temperature and control the other functions related

to the refrigerator without opening the door of the product. Just press the relevant buttons for function

settings.

Select

Quick FreezeQuick Cool

FN

OK

3 “

12 3 45 *6 9 10 11

12

*13

14

15

16

*17

*18

19

20

27

*28

29

30

31

32

33

*34.1*34.2

Select

Quick FreezeQuick Cool

FN

OK

3 “

7*8

*22 21

23

24

*25

26

16 / 30 EN Refrigerator / User Manual

Operating the product

1. Quick cooling function indicator

It turns on when the quick fridge function is

activated.

2. Fridge compartment temperature indicator

Temperature of the fridge compartment is shown;

it can be set to 8,7,6,5,4,3,2,1.

3. Fahrenheit indicator

It is a Fahrenheit indicator. When the Fahrenheit

indication is activated, the temperature set values

are shown in Fahrenheit and the relevant icon

turns on.

4. Key lock

Press key lock button simultaneously for 3 sec-

onds. Key lock symbol

will light up and key lock mode will be activated.

Buttons will not function if the Key lock mode is

active. Press key lock button simultaneously for 3

seconds again. Key lock symbol will turn off and

the key lock mode will be exited.

Press the key lock button if you want to prevent

changing of the temperature setting of the

refrigerator.

5. Power failure/High temperature / error

warning

This indicator illuminates during power failure, high

temperature failures and error warnings. During

long-term power failures, the highest temperature

value that the freezer compartment reaches will

blink on the digital display. After checking the food

located in the freezer compartment, press the

alarm off button to clear the warning.

Please refer to "solutions recommended for

troubleshooting" section on your manual if you

observe that this indicator is illuminated.

6. Filter reset icon

This icon turns on when the filter needs to be

reset.

7. Temperature change cabin icon

Indicates the cabin whose temperature is to be

changed. When the temperature change cabin icon

starts flashing, it is understood that the relevant

cabin has been selected.

8. Joker freezer icon

Hover over the Joker freezer icon using the FN button; the

icon will start to flash. When you press the OK key, joker

cabin freezer icon turn on and operates as a freezer.

9. Freezer compartment temperature

indicator

Temperature of the fridge compartment is shown;

it can be set to -16,-18,-19,-20,-21,-22,-24.

10. Quick freeze function indicator

It turns on when the quick freeze function is

activated.

11. Fahrenheit indicator

It is a Fahrenheit indicator. When the Fahrenheit

indication is activated, the temperature set values

are shown in Fahrenheit and the relevant icon

turns on.

12. Quick freeze function button

Press this button to activate or deactivate the quick

freeze function. When you activate the function,

the freezer compartment will be cooled to a

temperature lower than the set value.

CUse the quick freeze function when you

want to quickly freeze the food placed

in freezer compartment. If you want

to freeze large amounts of fresh food,

activate this function before putting the

food into the product.

CIf you do not cancel it, Quick Freeze

will cancel itself automatically after 24

hours at the most or when the fridge

compartment reaches to the required

temperature.

CThis function is not recalled when

power restores after a power failure.

13. Filter reset

The filter is reset when the quick freeze button is

pressed for 3 seconds. Filter reset icon goes off.

17/ 30 EN Refrigerator / User Manual

Operating the product

14. FN button

Using this key, you can switch between the

functions that you want to select. Upon pressing

this key, the icon, whose function is required to be

activated or deactivated, and this icon's indicator

starts flashing. The FN button gets deactivated if



button to change the functions again.

15. Celsius indicator

It is a Celsius indicator. When the Celsius indication

is activated, the temperature set values are shown

in Celsius and the relevant icon turns on.

16. OK button

After navigating the functions using the FN button,

when the function is cancelled via the OK button,

the relevant icon and the indicator flashes. When

the function is activated, it remains on. The

indicator continues to flash in order to show the

icon it is on.

17. Temperature change cabin icon

Indicates the cabin whose temperature is to be

changed. When the temperature change cabin icon

starts flashing, it is understood that the relevant

cabin has been selected.

18. Temperature change cabin icon

Indicates the cabin whose temperature is to be

changed. When the temperature change cabin icon

starts flashing, it is understood that the relevant

cabin has been selected.

19. Set increasing button

Select the relevant cabin with the select button;

the cabin icon representing the relevant cabin will

start to flash. If you press the set increasing button

during this process, the set value gets increased. If

you keep pressing it in a loop, the set value returns

to the beginning.

20. Temperature change cabin icon

Indicates the cabin whose temperature is to be

changed. When the temperature change cabin icon

starts flashing, it is understood that the relevant

cabin has been selected.

21. Setting the Celsius and Fahrenheit

indicator

Hover over this key using the FN key and select

Fahrenheit and Celsius via the OK key. When

the relevant temperature type is selected, the

Fahrenheit and Celsius indicator turns on.

22. Ice machine off icon

Press the FN key (until it reaches the ice icon and

the lower line) to switch off the ice machine. The

ice machine off icon and the ice machine function

indicator start flashing when you hover over them,

thus you can understand whether the ice machine

will be turned on or off. When you press the OK

button, the ice machine icon lights continuously

and the Indicator continues to flash during this

process. If you do not press any button after 20

seconds, the icon and the indicator remains on.

Thus, the ice machine is switched off. In order to

switch on the ice machine again, hover over the

icon and the indicator; thus, both the ice machine

off icon and the indicator will start flashing. If you

do not press any button within 20 seconds, the

icon and the indicator will go off and thus the ice

machine will be switched on again.

CIndicates whether the icematic is

on or off.

CWater flow from water tank

will stop when this function is

selected. However, ice made

previously can be taken from the

icematic.

23. Eco fuzzy function icon

Press the FN key (until it reaches the letter e

icon and the lower line) to activate the eco fuzzy.

When you hover over the eco fuzzy icon and the

eco fuzzy function indicator, they start flashing.

Thus, you can understand whether the eco fuzzy

function will be activated or deactivated. When you

press the OK button, the eco fuzzy function icon

lights continuously and the Indicator continues to

flash during this process. If you do not press any

button after 20 seconds, the icon and the indicator

remains on. Thus, the eco fuzzy function is

activated. In order to cancel the eco fuzzy function,

18 / 30 EN Refrigerator / User Manual

Operating the product

hover over the icon and the indicator again and

press the OK key. Thus, both the eco fuzzy function

icon and the indicator will start flashing. If you do

not press any button within 20 seconds, the icon

and the indicator will go off and the eco fuzzy

function will be cancelled.

24. Vacation function icon

Press the FN key (until it reaches the umbrella

icon and the lower line) to activate the vacation

function. When you hover over the vacation

function icon and the vacation function indicator,

they start flashing. Thus, you can understand

whether the vacation function will be activated or

deactivated. When you press the OK button, the

vacation function icon lights continuously and thus

the Vacation function is activated. The Indicator

continues to flash during this process. Press the

OK key to cancel the vacation function. Thus, both

the vacation function icon and the indicator will

start flashing and the vacation function will be

cancelled.

25. Joker fridge icon

When you select the joker fridge icon using the FN

button and press the OK key, the joker cabin turns

into a fridge cabin and operates as a cooler.

26. Celsius indicator

It is a Celsius indicator. When the Celsius indication

is activated, the temperature set values are shown

in Celsius and the relevant icon turns on.

27. Set decreasing function

Select the relevant cabin with the select button;

the cabin icon representing the relevant cabin

will start to flash. If you press the set decreasing

button during this process, the set value gets

decreased. If you keep pressing it in a loop, the set

value returns to the beginning.

28. Temperature change cabin icon

Indicates the cabin whose temperature is to be

changed. When the temperature change cabin icon

starts flashing, it is understood that the relevant

cabin has been selected.

29. Temperature change cabin icon

Indicates the cabin whose temperature is to be

changed. When the temperature change cabin icon

starts flashing, it is understood that the relevant

cabin has been selected.

30. Key lock

Press key lock button simultaneously for 3 sec-

onds. Key lock symbol

will light up and key lock mode will be activated.

Buttons will not function if the Key lock mode is

active. Press key lock button simultaneously for 3

seconds again. Key lock symbol will turn off and

the key lock mode will be exited.

Press the key lock button if you want to prevent

changing of the temperature setting of the

refrigerator.

31.Select button

Use this button to select the cabin whose tem-

perature you want to change. Switch between

the cabins by pressing this button. The selected

cabin can be understood from the cabin icons

(7,17,18,20,28,29). Whichever cabin icon is flash-

ing, the cabin, whose temperature set value you

want to change, is selected. Then, you can change

the set value by pressing the cabin set value

decreasing button (27) and the cabin set value in-

creasing button (19). If you do not press the select

button for 20 seconds, the cabin icons will go off.



32. Alarm off warning

In case of power failure/high temperature

alarm, after checking the foods in the freezer

compartment, press the alarm off button to clear

the warning.

33. Quick cooling function button

The button has two functions. To activate or

deactivate the quick cool function, press it briefly.

Quick Cool indicator will turn off and the product

will return to its normal settings.

19/ 30 EN Refrigerator / User Manual

Operating the product

CUse quick cooling function when you

want to quickly cool the food placed

in the fridge compartment. If you want

to cool large amounts of fresh food,

activate this function before putting the

food into the product.

CIf you do not cancel it, quick cooling

will cancel itself automatically after 1

hours at the most or when the fridge

compartment reaches to the required

temperature.

CIf you press the quick cooling button

repeatedly with short intervals, the

electronic circuit protection will be

activated and the compressor will not

start up immediately.

CThis function is not recalled when

power restores after a power failure.

34. 1 Joker temperature indicator

Temperature set values of the joker cabin are

displayed.

34. 2 Wine cooler compartment tempature

indicator

Tempature set values of the winecabin are dis-

played.

Stránka sa načítava...

Beko GN1406231XBN Používateľská príručka

Beko GN1406231XBN Používateľská príručka

v iných jazykoch

Súvisiace články