Beko TSE1284N Používateľská príručka

TSE1284N

EN / FR / DE / NL

58 4198 0000/AG

1/7

Manuel d'utilisation

Kühlschrank/Gefrierschrank

Bedienungsanleitung

Gebruiksaanwijzing

Réfrigérateur

Refrigerator

User manual

Koelkast

Please read this user manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants and

checked under the most meticulous quality control procedures, will provide you

an effective service.

Therefore, read this entire user manual carefully before using the product and

keep it as a reference. If you handover the product to someone else, give the

user manual as well.

The user manual will help you use the product in a fast and safe way.

• Read the manual before installing and operating the product.

• Make sure you read the safety instructions.

• Keep the manual in an easily accessible place as you may need it later.

• Read the other documents given with the product.

Remember that this user manual is also applicable for several other models.

Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

CImportant information or useful tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

A

C

SUPPLIER’S NAME MODEL IDENTIFIER (*)

INFORMATION

C

The model information as stored in the product data base

can be reached by entering following website and searching

for your model identiﬁer (*) found on energy label.

https://eprel.ec.europa.eu/

EN

2

CONTENTS

1 Your cooler/freezer 3

2 Safety and Environment

Instructions 4

General Safety ............................................4

Intended Use ...............................................6

Child Safety .................................................. 7

Compliance with WEEE Directive and

Disposing of the Waste Product ......... 7

Compliance with RoHS Directive......... 7

Package Information ................................ 7

3 Installation 8

Points to be paid attention to when

the relocation of the cooler/freezer .8

Before you start the cooler/freezer, .8

Electrical connection ...............................8

Disposing of the packaging ...................9

Disposing of your old cooler/freezer 9

Placing and Installation...........................9

Adjusting the legs ...................................10

Changing the illumination lamp .......10

4 Preparation 11

Reversing the doors ...............................13

5 Using your cooler/

freezer 15

Freezing food ............................................15

Making ice cubes......................................16

Defrosting of the appliance ................16

Cooling .........................................................17

Food storage .............................................17

Defrosting of the appliance ................17

6 Maintenance and

cleaning 18

Protection of plastic surfaces ...........18

7 Troubleshooting 19

EN

3

1 Your cooler/freezer

1. a.) Freezing compartment & ice tray

(for models) b.) Frozen food

compartment & ice tray (for

models)

2. Interior light & Thermostat knob

3. Movable shelves

4. Defrost water collection channel -

Drain tube

5. Crisper cover

6. Crisper

7. Adjustable front feet

8. Dairy compartment

9. Door shelf

10. Egg tray

11. Bottle shelf

12. Bottle gripper

13. To p t ri m

C Figures that take place in this instruction manual are schematic and may

not correspond exactly with your product. If the subject parts are not included

in the product you have purchased, then it is valid for other models.

2

5

6

3

7

4

1

11

8

10

9

12

13

EN

4

2 Safety and Environment Instructions

This section provides the safety

instructions necessary to prevent the

risk of injury and material damage.

Failure to observe these instructions

will invalidate all types of product

warranty.

Intended use

A

WARNING:

Keep ventilation openings,

in the appliance enclosure or

in the built-instructure, clear

of obstruction.

A

WARNING:

Do not use mechanical

devices or other

means to accelerate the

defrostingprocess, other

than those recommended

by the manufacturer.

AWARNING:

Do not damage the

refrigerant circuit.

A

WARNING:

Do not use electrical

appliances inside the food

storage compartments

of the appliance, unless

they are of the type

recommended by the

manufacturer.

A

WARNING:

Do not store explosive

substances such as aerosol

cans with a flammable

propellant in this appliance.

This appliance is intended to be used

in household and similar applications

such as

– staff kitchen areas in shops, offices

and other working environments;

– farm houses and by clients in

hotels, motels and other residential

type environments;

– bed and breakfast type

environments;

– catering and similar non-retail

applications.

General Safety

• This product should not be

used by persons with physical,

sensory and mental disabilities,

without sufficient knowledge and

experience or by children. The device

can only be used by such persons

under supervision and instruction of

a person responsible for their safety.

Children should not be allowed to

play with this device.

• In case of malfunction, unplug the

device.

• After unplugging, wait at least 5

minutes before plugging in again.

• Unplug the product when not in use.

• Do not touch the plug with wet

hands! Do not pull the cable to plug

off, always hold the plug.

• Do not plug in the refrigerator if the

socket is loose.

• Unplug the product during

installation, maintenance, cleaning

and repair.

• If the product will not be used for

a while, unplug the product and

remove any food inside.

• Do not use the product when the

compartment with circuit cards

located on the upper back part of

EN

5

the product (electrical card box

cover) (1) is open.

1

• Do not use steam or steamed

cleaning materials for cleaning

the refrigerator and melting the

ice inside. Steam may contact the

electrified areas and cause short

circuit or electric shock!

• Do not wash the product by spraying

or pouring water on it! Danger of

electric shock!

• In case of malfunction, do not use

the product, as it may cause electric

shock. Contact the authorized

service before doing anything.

• Plug the product into an earthed

socket. Earthing must be done by a

qualified electrician.

• If the product has LED type lighting,

contact the authorized service for

replacing or in case of any problem.

• Do not touch frozen food with wet

hands! It may adhere to your hands!

• Do not place liquids in bottles and

cans into the freezer compartment.

They may burst out!

• Place liquids in upright position after

tightly closing the lid.

• Do not spray flammable substances

near the product, as it may burn or

explode.

• Do not keep flammable materials

and products with flammable gas

(sprays, etc.) in the refrigerator.

• Do not place containers holding

liquids on top of the product.

Splashing water on an electrified

part may cause electric shock and

risk of fire.

• Exposing the product to rain,

snow, sunlight and wind will cause

electrical danger. When relocating

the product, do not pull by holding

the door handle. The handle may

come off.

• Take care to avoid trapping any part

of your hands or body in any of the

moving parts inside the product.

• Do not step or lean on the door,

drawers and similar parts of the

refrigerator. This will cause the

product to fall down and cause

damage to the parts.

• Take care not to trap the power

cable.

• When positioning the appliance,

ensure the supply cord is not

trapped or damaged.

• Do not locate multiple portable

socket-outlets or portable power

supplies at the rear of the appliance.

EN

6

• Children aged from 3 to 8 years

are allowed to load and unload

refrigerating appliances.

• To avoid contamination of food,

please respect the following

instructions:

• – Opening the door for long

periods can cause a significant

increase of the temperature in the

compartments of the appliance.

• – Clean regularly surfaces that

can come in contact with food and

accessible drainage systems.

• – Clean water tanks if they have not

been used for 48 h; flush the water

system connected to a water supply

if water has not been drawn for 5

days.

• – Store raw meat and fish in suitable

containers in the refrigerator, so that

it is not in contact with or drip onto

other food.

• – Two-star frozen-food

compartments are suitable for

storing pre-frozen food, storing or

making icecream and making ice

cubes.

• – One-, two- and three-star

compartments are not suitable for

the freezing of fresh food.

• – If the refrigerating appliance is

left empty for long periods, switch

off, defrost, clean, dry, and leave

the door open to prevent mould

developing within the appliance.

1.1.1 HC Warning

If the product comprises a cooling

system using R600a gas, take care to

avoid damaging the cooling system

and its pipe while using and moving

the product. This gas is flammable. If

the cooling system is damaged, keep

the product away from sources of fire

and ventilate the room immediately.

C

The label on the inner left

side indicates the type of

gas used in the product.

1.1.2 For Models with

Water Dispenser

• Pressure for cold water inlet shall

be maximum 90 psi (6.2 bar). If

your water pressure exceeds 80

psi (5.5 bar), use a pressure limiting

valve in your mains system. If you

do not know how to check your

water pressure, ask for the help of a

professional plumber.

• If there is risk of water hammer

effect in your installation, always

use a water hammer prevention

equipment in your installation.

Consult Professional plumbers if you

are not sure that there is no water

hammer effect in your installation.

• Do not install on the hot water inlet.

Take precautions against of the

risk of freezing of the hoses. Water

temperature operating interval shall

be 33°F (0.6°C) minimum and 100°F

(38°C) maximum.

• Use drinking water only.

Intended Use

• This product is designed for home

use. It is not intended for commercial

use.

• The product should be used to store

food and beverages only.

• Do not keep sensitive products

requiring controlled temperatures

(vaccines, heat sensitive medication,

medical supplies, etc.) in the

refrigerator.

EN

7

• The manufacturer assumes no

responsibility for any damage due to

misuse or mishandling.

• Original spare parts will be provided

for 10 years, following the product

purchasing date.

Child Safety

• Keep packaging materials out of

children’s reach.

• Do not allow the children to play

with the product.

• If the product’s door comprises a

lock, keep the key out of children’s

reach.

Compliance with WEEE

Directive and Disposing of

the Waste Product

This product complies with

EU WEEE Directive (2012/19/EU). This

product bears a classification symbol

for waste electrical and electronic

equipment (WEEE).

This product has been

manufactured with high

quality parts and materials

which can be reused and

are suitable for recycling.

Do not dispose of the

waste product with

normal domestic and other wastes at

the end of its service life. Take it to the

collection center for the recycling of

electrical and electronic equipment.

Please consult your local authorities

to learn about these collection

centers.

Compliance with RoHS

Directive

• This product complies with EU WEEE

Directive (2011/65/EU). It does

not contain harmful and prohibited

materials specified in the Directive.

Package Information

Packaging materials of the product

are manufactured from recyclable

materials in accordance with our

National Environment Regulations. Do

not dispose of the packaging materials

together with the domestic or other

wastes. Take them to the packaging

material collection points designated

by the local authorities.

EN

8

3 Installation

B The manufacturer will not be liable

for any event caused by disregarding

the information supplied in this user

manual.

Points to be paid attention

to when the relocation of

the cooler/freezer

1. Your cooler/freezer should be

unplugged.Before transportation

of your cooler/freezer, it should be

emptied and cleaned.

2. Before it is re-packaged, shelves,

accessories, crisper, etc. inside

your cooler/freezer should be fixed

with adhesive tape and secured

against impacts. Package should

be bound with a thick tape and the

transportation rules on the package

should be strictly observed.

3. Original packaging and foam

materials should be kept for future

transportations or moving.

Before you start the

cooler/freezer,

Check the following before you start

to use your cooler/freezer:

1. Attach 2 plastic wedges as

illustrated below. Plastic wedges

are intended to keep the distance

which will ensure the air circulation

between your cooler/freezer and

the wall. (The picture is drawn up

as a representation and it is not

identical with your product.)

2. Clean the interior of the cooler/

freezer as recommended in the

“Maintenance and cleaning” section.

3. Connect the plug of the cooler/

freezer to the wall socket. When the

fridge door is opened, fridge internal

lamp will turn on.

4. When the compressor starts to

operate, a sound will be heard. The

liquid and gases sealed within the

refrigeration system may also give

rise to noise, even if the compressor

is not running and this is quite

normal.

5. Front edges of the cooler/freezer

may feel warm. This is normal. These

areas are designed to be warm to

avoid condensation.

Electrical connection

Connect your product to a grounded

socket which is being protected by a

fuse with the appropriate capacity.

Important:

The connection must be in

compliance with national regulations.

• The power plug must be easily

accessible after installation.

• Electrical safety of your cooler/

freezer shall be guaranteed only

if the earth system in your house

complies with standards.

EN

9

• The voltage stated on the label

located at left inner side of your

product should be equal to your

network voltage.

• Extension cables and multi plugs

must not be used for connection.

B A damaged power cable must be

replaced by a qualified electrician.

B Faulty product must not be operated

before it is repaired! There is the risk

of electric shock!

Disposing of the packaging

The packing materials may be

dangerous for children. Keep the

packing materials out of the reach

of children or dispose of them by

classifying them in accordance with

the waste instructions stated by your

local authorities. Do not throw away

with regular house waste, throw away

on packaging pick up spots designated

by the local authorities.

The packing of your cooler/freezer is

produced from recyclable materials.

Disposing of your old

cooler/freezer

Dispose of your old cooler/freezer

without giving any harm to the

environment.

• You may consult your authorized

dealer or waste collection center of

your municipality about the disposal

of your cooler/freezer.

Before disposing of your cooler/

freezer, cut out the electric plug and, if

there are any locks on the door, make

them inoperable in order to protect

children against any danger.

Placing and Installation

A If the entrance door of the room

where the cooler/freezer will be

installed is not wide enough for the

cooler/freezer to pass through, then

carefully remove the doors of your

cooler/freezer and pass it sideways

through the door.

1. Install your cooler/freezer to a place

that allows ease of use.

2. Keep your cooler/freezer away from

heat sources, humid places and

direct sunlight.

3. There must be appropriate air

ventilation around your cooler/

freezer in order to achieve an

efficient operation. If the cooler/

freezer is to be placed in a recess in

the wall, there must be at least 5 cm

distance with the ceiling and at least

5 cm with the wall. Do not place your

product on the materials such as rug

or carpet.

4. Place your cooler/freezer on an even

floor surface to prevent jolts.

WARNING:

Do not locate extension

sockets or charging transformers/

power supplies or Lithium-Iron battery

operated products adjacent to the

compressor as they could overheat.

EN

10

Adjusting the legs

If your refrigerator is unbalanced;

You can balance your refrigerator

by turning its front legs as illustrated

in the figure. The corner where the

leg exists is lowered when you turn

in the direction of black arrow and

raised when you turn in the opposite

direction. Taking help from someone

to slightly lift the refrigerator will

facilitate this process.

Changing the illumination

lamp

To change the Bulb/LED used for

illumination of your refrigerator, call

your AuthorisedService.

The lamp(s) used in this appliance

is not suitable for household room

illumination. The intended purpose

of this lamp is to assist the user to

place foodstuffs in the refrigerator/

freezer in a safe and comfortable

way.The lamps used in this appliance

have to withstand extreme physical

conditions such as temperatures

below -20 °C.

(only chest and upright freezer)

EN

11

4 Preparation

• Your refrigerator should be installed

at least 30 cm away from heat

sources such as hobs, ovens, central

heater and stoves and at least 5

cm away from electrical ovens and

should not be located under direct

sunlight.

• The ambient temperature of

the room where you install your

refrigerator should at least be

10°C. Operating your refrigerator

under cooler conditions is not

recommended with regard to its

efficiency.

• Please make sure that the interior

of your refrigerator is cleaned

thoroughly.

• If two refrigerators are to be

installed side by side, there should

be at least 2 cm distance between

them.

• When you operate your refrigerator

for the first time, please observe the

following instructions during the

initial six hours.

• The door should not be opened

frequently.

• It must be operated empty without

any food in it.

• Do not unplug your refrigerator. If

a power failure occurs out of your

control, please see the warnings in

the “Recommended solutions for

the problems” section.

• Original packaging and foam

materials should be kept for future

transportations or moving.

• The baskets/drawers that are

provided with the chill compartment

must always be in use for low energy

consumption and for better storage

conditions.

• Food contact with the temperature

sensor in the freezer compartment

may increase energy consumption

of the appliance. Thus any contact

with the sensor(s) must be avoided.

• In some models, the instrument

panel automatically turns off 5

minutes after the door has closed.

It will be reactivated when the door

has opened or pressed on any key.

• Due to temperature change as

a result of opening/closing the

product door during operation,

condensation on the door/body

shelves and the glass containers is

normal

• For a freestanding appliance;

‘this refrigerating appliance is not

intended to be used as a built-in

appliance.

EN

12

1

55 mm

595 mm

820 mm

23

4

a

ac

b

bd

e

b b

EN

13

Reversing the doors

Proceed in numerical order

a

H

G

D

E

I

F





EN

14

1

60°

9

14

60°

16

10

2

3

4

8

7

12

11

6

15

13

5

EN

15

5 Using your cooler/freezer

The operating temperature is

regulated by the temperature control.

1 = Lowest cooling setting

(Warmest setting)

5 = Highest cooling setting

(Coldest setting)

(Or)

Min. = Lowest cooling setting

(Warmest setting)

Max. = Highest cooling setting

(Coldest setting)

The average temperature inside the

fridge should be around +4°C.

Recommended thermostat knob

position is 4 .It's recommended 1

at cold ambient conditions such as

10 °C.

Please choose the setting according

to the desired temperature.

You can stop operation of your

appliance by turning the thermostat

knob to “0” position.

Please note that there will be

different temperatures in the cooling

area.

Warm Cold

1 2 3 4 5

(Or) Min. Max.

The coldest region is immediately

above the vegetable compartment on

crisper cover.

The interior temperature also

depends on ambient temperature,

the frequency with which the door is

opened and the amount of food kept

inside.

Frequently opening the door causes

the interior temperature to rise.

For this reason, it is recommended

to close the door again as soon as

possible after use.

Freezing food

The freezing compartment is marked

with this symbol.

You can use the appliance for

freezing fresh food as well as for

storing pre-frozen food.

Please refer to the recommendations

given on the packaging of your food.

• Attention

Do not freeze fizzy drinks, as the

bottle may burst when the liquid in it

is frozen.

Be careful with frozen products such

as coloured ice-cubes.

In order to maintain the quality of the

food, the freezing must be effected as

rapidly as possible.

• Attention

Keep the already deep-frozen food

always separated with freshly placed

food.

EN

16

When deep-freezing hot food, the

cooling compressor will work until the

food is completely frozen. This can

temporarily cause excessive cooling

of the refrigeration compartment.

If you find the freezer door difficult

to open just after you have closed it,

don’t worry. This is due to the pressure

difference which will equalize and

allow the door to open normally after

a few minutes.

You will hear a vacuum sound just

after closing the door. This is quite

normal.

Making ice cubes

Fill the ice-cube tray 3/4 full with

water and place it in the freezer.

As soon as the water has turned into

ice, you can take out the ice cubes.

Never use sharp objects such as

knives or forks to remove the ice

cubes. There is a risk of injury!

Let the ice cubes slightly thaw

instead, or put the bottom of the tray

in hot water for a short moment.

Defrosting of the appliance

Excessive build-up of ice will affect

the freezing performance of your

device.

It is therefore recommended that you

defrost your appliance at least twice

a year, or whenever the ice build-up

exceeds 7 mm.

Defrost your device when there is

only little or no food in it.

Take out the deep-frozen food. Wrap

the deep-frozen food in several layers

of paper, or a blanket, and keep it in a

cold place.

Unplug the appliance or switch

off the circuit breaker to start the

defrosting process.

Take out the accessories (like shelf,

drawer etc.) from the appliance and

use a suitable container to collect the

thawing water.

Use a sponge or a soft cloth to

remove thawing water if necessary

at the freezing compartment

and frozen food compartment

Keep the door open during

defrosting.

For quicker defrosting, place

containers with warm water inside

the appliance.

Never use electrical devices,

defrosting sprays or pointed or sharp-

edged objects such as knives or forks

to remove the ice.

After the defrosting is done, clean

interior walls of the compartment.

EN

17

Reconnect the appliance to the

mains. Place the frozen food into the

drawers and slide the drawers into the

freezer.

Cooling

Food storage

The fridge compartment is for the

short-term storage of fresh food and

drinks.

Store milk products in the intended

compartment in the cooler/freezer.

Bottles can be stored in the bottle

holder or in the bottle shelf of the

door.

Raw meat is best kept in a

polyethylene bag in the compartment

at the very bottom of the cooler/

freezer.

Allow hot food and beverages to cool

to room temperature prior to placing

them in the cooler/freezer.

• Attention

Store concentrated alcohol in a

container only standing upright and

tightly closed.

• Attention

Do not store explosive substances or

containers with flammable propellant

gases (canned cream, spray cans etc.)

in the appliance.

There is a danger of explosion.

Defrosting of the appliance

The fridge compartment defrosts

automatically. The thawing water

flows through the drain channel into a

collection container at the back of the

appliance.

During defrosting, water droplets

form at the back wall of the fridge due

to the evaporation.

If not all of the drops run down, they

may freeze again after defrosting

completes. Remove them with a soft

cloth dampened with warm water. Do

not use hard or sharp objects.

Check the flow of the thawed water

from time to time. It may become

blocked occasionally. Clean it with a

pipe-cleaner or similar implement as

shown below.

EN

18

6 Maintenance and cleaning

A Never use gasoline, benzene or

similar substances for cleaning

purposes.

B We recommend that you unplug the

appliance before cleaning.

B Never use any sharp abrasive

instrument, soap, household

cleaner, detergent and wax polish

for cleaning.

B For non-No Frost products,

water drops and frosting up to a

fingerbreadth occur on the rear wall

of the Fridge compartment. Do not

clean it; never apply oil or similar

agents on it.

B Only use slightly damp microfiber

cloths to clean the outer surface

of the product. Sponges and other

types of cleaning cloths may scratch

the surface.

C Use lukewarm water to clean the

cabinet of your refrigerator and wipe

it dry.

C Use a damp cloth wrung out in

a solution of one teaspoon of

bicarbonate of soda to one pint of

water to clean the interior and wipe

it dry.

B Make sure that no water enters the

lamp housing and other electrical

items.

B If your refrigerator is not going to

be used for a long period of time,

unplug the power cable, remove all

food, clean it and leave the door ajar.

C Check door seals regularly to ensure

they are clean and free from food

particles.

A To remove door racks, remove all the

contents and then simply push the

door rack upwards from the base.

A Never use cleaning agents or water

that contain chlorine to clean the

outer surfaces and chromium coated

parts of the product. Chlorine causes

corrosion on such metal surfaces.

A Do not use sharp, abrasive tools,

soap, household cleaning agents,

detergents, kerosene, fuel oil,

varnish etc. to prevent removal and

deformation of the prints on the

plastic part. Use lukewarm water

and a soft cloth for cleaning and

then wipe it dry.

Protection of plastic

surfaces

C Do not put the liquid oils or oil-

cooked meals in your refrigerator

in unsealed containers as they

damage the plastic surfaces of your

refrigerator. In case of spilling or

smearing oil on the plastic surfaces,

clean and rinse the relevant part

of the surface at once with warm

water.

EN

19

7 Troubleshooting

Check this list before contacting the

service. Doing so will save you time

and money. This list includes frequent

complaints that are not related to

faulty workmanship or materials.

Certain features mentioned herein

may not apply to your product.

The refrigerator is not working.

• The power plug is not fully settled. >>>

Plug it in to settle completely into the

socket.

• The fuse connected to the socket

powering the product or the main fuse is

blown. >>> Check the fuses.

Condensation on the side wall of

the cooler compartment (MULTI

ZONE, COOL, CONTROL and FLEXI

ZONE).

• The door is opened too frequently >>>

Take care not to open the product’s door

too frequently.

• The environment is too humid. >>>

Do not install the product in humid

environments.

• Foods containing liquids are kept in

unsealed holders. >>> Keep the foods

containing liquids in sealed holders.

• The product’s door is left open. >>>

Do not keep the product’s door open for

long periods.

• The thermostat is set to too low

temperature. >>> Set the thermostat to

appropriate temperature.

Compressor is not working.

• In case of sudden power failure

or pulling the power plug off and

putting back on, the gas pressure in

the product’s cooling system is not

balanced, which triggers the compressor

thermic safeguard. The product will

restart after approximately 6 minutes.

If the product does not restart after this

period, contact the service.

• Defrosting is active. >>> This is normal

for a fully-automatic defrosting product.

The defrosting is carried out periodically.

• The product is not plugged in. >>>

Make sure the power cord is plugged in.

• The temperature setting is incorrect.

>>> Select the appropriate temperature

setting.

• The power is out. >>> The product will

continue to operate normally once the

power is restored.

The refrigerator’s operating noise

is increasing while in use.

• The product’s operating performance

may vary depending on the ambient

temperature variations. This is normal

and not a malfunction.

The refrigerator runs too often or

for too long.

• The new product may be larger than the

previous one. Larger products will run

for longer periods.

• The room temperature may be high.

>>> The product will normally run

for long periods in higher room

temperature.

• The product may have been recently

plugged in or a new food item is placed

Stránka sa načítava ...

Beko TSE1284N Používateľská príručka

Beko TSE1284N Používateľská príručka

V iných jazykoch